This document provides pumping pre-lift values to verify the setting of injection pumps on various NEF mechanical engine models. It lists over 50 engine codes and their corresponding commercial codes along with the specified pumping pre-lift value of either 1 ± 0.05 or 1.15 ± 0.05 millimeters, which should align with the piston at top dead center as measured by a specific tool and dial indicator. A few additional engine codes require verification at 4.72 ± 0.05 or 4.91 ± 0.05 millimeters.
This document provides pumping pre-lift values to verify the setting of injection pumps on various NEF mechanical engine models. It lists over 50 engine codes and their corresponding commercial codes along with the specified pumping pre-lift value of either 1 ± 0.05 or 1.15 ± 0.05 millimeters, which should align with the piston at top dead center as measured by a specific tool and dial indicator. A few additional engine codes require verification at 4.72 ± 0.05 or 4.91 ± 0.05 millimeters.
This document provides pumping pre-lift values to verify the setting of injection pumps on various NEF mechanical engine models. It lists over 50 engine codes and their corresponding commercial codes along with the specified pumping pre-lift value of either 1 ± 0.05 or 1.15 ± 0.05 millimeters, which should align with the piston at top dead center as measured by a specific tool and dial indicator. A few additional engine codes require verification at 4.72 ± 0.05 or 4.91 ± 0.05 millimeters.