Professional Documents
Culture Documents
Resinex® Jacobi K-8 FG
Resinex® Jacobi K-8 FG
Standard Packaging
Resinex K-8 FG ™
)
°F
(40
100 F) 100
(50
1.0
8° F)
5°C
(6 6°
°C
C (8
0°
10
2 °C
Pressure Drop, kPa/m
F)
Pressure Drop, bar/m
80 30 80
)
0.8
°F
Bed Expansion, %
(40°
F)
F)
50
8°
4°
F)
(
(6
(10
6°
°C
5°C
°C
(8
°C
10
20
60 40 60
°C
0.6
30
40 0.4 40
20 0.2 20
0 0 0
0 20 40 60 80 100 0 10 20 30 40 50
Flow Rate, m/h Flow Rate, m/h
1.6 35 10
Hardness Leakage, ppm as CaCO3
1.4 30 8
Capactiy, eq/lit
Capacity, kg/ft3
1.2 25 6
1.0 20 4
0.8 15 2
0.6 0 0
0 5 10 15 20 25 0 5 10 15 20 25
NaCl Regeneration, lb/ft3 NaCl Regeneration, lb/ft3
Capacity and Hardness Leakage graphs are shown assuming a service flow of 4 gpm/ft3 (32 l/h/l) and total dissolved solids of 400 ppm and 20 grains of total hardness. The hardness leakage will increase
and the capacity will decrease while increasing total dissolved solids and total hardness.
NOTICE If this product is to be used for potable water treatment, or any food grade application, a special procedure must be applied for the initial run. Please ask your nearest Jacobi office for this
technical bulletin.
Product Packing
abcdef
CAUTION Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials.
NOTICE Due to the progressive nature of the Jacobi Carbons Group and the continually improving design and performance of our products,
we reserve the right to change product specifications without prior notification. The information contained in this datasheet is intended to
assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer is responsible for determining whether Jacobi Corporate Headquarters
products and the information contained in this document are appropriate for customer’s use. Jacobi Carbons assumes no obligation or liability
for the usage of the information in this datasheet, no guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims Slöjdaregatan 1
responsibility and the user must accept full responsibility for performance of systems based on this data. SE-39353 Kalmar | Sweden
Tel: +46 480 417550 | Fax: +46 480 417559
© Copyright 2015. Jacobi, Jacobi Carbons, Resinex, the Resinex and the Jacobi logos are trademarks of Jacobi Carbons, all of which may info@jacobi.net | www.jacobi.net
or may not be used in certain jurisdiction.
RX-K8FG_e_Rev10_20150602