Professional Documents
Culture Documents
SMB Pro Multi Bms PDF
SMB Pro Multi Bms PDF
SMBPRO BMS is a Smart CAN and Bluetooth based management system used in
large current applications. Supporting passive balancing as well as Active (using
custom code) which complies with overall battery protection features like
overcharge, over discharge, over current and over temperature protection etc.
The BMS communicates with the PC or Charger and Controller via CAN and
supports CAN 2.0 it also supports mobile connection via a dedicated mobile app,
supporting Android OS. The app is used to monitor live battery working status and
can be used to modify the working parameters of the BMS and also acts as an
emergency switch to switch off charging as well as discharging. Having a Robust
design and being small and extremely light this BMS can be used in various
applications like Solar, Defense, Medical, Bio-Medical, EV’s etc
Features:
Supports:
SMB52163253: Supports Li ion & Lipo (16s-32s) LFP (16S to 32S) and
LTO(16S to 32S)
SMB52072453: Supports Li ion & Lipo (7s-24s) LFP (8S to 24S) and
LTO(10S to 24S)
SMB52072053: Supports Li ion & Lipo (7s-20s) LFP (8S to 20S) and
LTO(10S to 20S)
SMB52071653: Supports Li ion & Lipo (7s-20s) LFP (8S to 20S) and
LTO(10S to 20S)
The default is the li-ion parameters however when you connect your phone to the
BMS via Bluetooth, you can click and set up lifePo4 / LTO parameters.
1> Single cell voltage detection range 1.5V-4.6V.
2> High precision detection cell voltage error is less than 5MA
3> Charging current 50A
4> Discharge current: 120-160A Continous 320 Peak (Depending on
which BMS model you buy)
5> Balance current :200MA .
6> Controlled balance mode, when you start charging, the voltage
difference can be detected by the voltage difference greater than the set
value.
7> High-precision coulomb counter function temperature control
detection Hall speed measurement
8> Bluetooth connection : support for android with bluetooth 4.0
9> Support cells :Support Li-ion , Lipo , 18650, Lifepo4 , LTO and so
on
10> Voltage accuracy :Single cell voltage detection range (1.5-4.6V),
accuracy error within 3 mV
11> Overcharge protection
12> Over discharge protection
13> Short circuit protection: Upto 320A
14> Overcurrent protection: maximum 300A
15> Current detection: within the current range of the BMS
16> Temperature control protection: The protection board has built-in
balanced temperature control, power temperature, and can be connected
with 4 temperature sensors to prevent high temperature danger.
17> Balance current: 200 mA, high voltage vs low voltage difference
18> Coulomb counter
BMS TECHNICAL PARAMETERS
AUTO SLEEP
1 POWER SUPPLY METHOD POWERED BY BATTERY, INPUT 20~150V
MODE
VARIES BOARD
2 SUPPORT CONNECTION 7~32 IN SERIES CONNECTION
TO BOARD
POWER CONSUMPTION IN
4 <1.5MA (60V) AUTO WAKE
SLEEPING MODE
17 POWER SPEC RATED 120A CC @ 80V, PEAK 320A(30S) @ 100V SAME PORT
21 IP LEVEL IP30
22 WEIGHT <400G
BMS CONNECTION DIAGRAM
Pin Assignment of Temperature Sampling
Connector : J6
NO. PIN NO Description
1 J6-1 NTC Ground
2 J6-2 NTC 1
3 J6-3 NTC2
4 J6-4 NTC3
5 J6-5 NTC4
6 J6-6 NTC5
PARAMETER SCREENS