This risk assessment was conducted for general hazards at a power plant. It identifies several hazards including exposure to hot steam, slippery floors, overpressure in boilers, pipeline ruptures, steam turbine overheating, and electric shocks. For each hazard, it lists affected individuals, potential risks, and recommended control measures. Control measures include use of PPE like safety glasses and coveralls, maintenance and inspections to check for equipment failures, monitoring pipeline flows, and keeping electric panels dry. The overall risks were rated as low, medium, or high based on consequence and likelihood.
This risk assessment was conducted for general hazards at a power plant. It identifies several hazards including exposure to hot steam, slippery floors, overpressure in boilers, pipeline ruptures, steam turbine overheating, and electric shocks. For each hazard, it lists affected individuals, potential risks, and recommended control measures. Control measures include use of PPE like safety glasses and coveralls, maintenance and inspections to check for equipment failures, monitoring pipeline flows, and keeping electric panels dry. The overall risks were rated as low, medium, or high based on consequence and likelihood.
This risk assessment was conducted for general hazards at a power plant. It identifies several hazards including exposure to hot steam, slippery floors, overpressure in boilers, pipeline ruptures, steam turbine overheating, and electric shocks. For each hazard, it lists affected individuals, potential risks, and recommended control measures. Control measures include use of PPE like safety glasses and coveralls, maintenance and inspections to check for equipment failures, monitoring pipeline flows, and keeping electric panels dry. The overall risks were rated as low, medium, or high based on consequence and likelihood.
UDST (Doha, Qatar) Assignment 1 / General Risk Assessment
University of Doha for Science and Technology Name: Muhammad Usman Hussain UDST Number: 60098397 Section: 1 Management Unit: AEMA 2202 Location: (Site/Building/Room) 09.1.41
Assessment Date: 18-05-22 Review Date: 18-05-22
Assessor’s Name: M. Usman Hussain Job Title: Student Task/Activity: General Risk Assessment
What control measures are
required to eliminate or reduce the risks? Risk Risk What are the Hazards? What are the Risks? Who might be Evaluation Rating hurt?
Consequenc Likelihood Overall Low,
e (1-3) risk Medium (1-3) (C x L) or High Exposure to High Severe burns, Anyone near Periodically check for any valves 3 2 6 High Pressure/Temperature/Ho Eye/Skin irritation the working that may be open unnecessarily. t Steam/Water or hot due to splashes of hot Machine/ Wear appropriate safety surfaces liquid or Respiratory Someone glasses/Coverall. Installation of issues due to escaping without PPE exhaust ventilation. Training of fire steam extinguishing procedures before- hand Slippery floors/areas above Slipping, Tripping, and Anyone. (In Wear safety shoes with fine sole at 1 1 1 Low the ground due to oil/fuel falling from elevated most cases, the bottom/No rushing/ Don’t spill ladders during routine someone old) horseplay/Keep laces tied work Over-pressure and/or Explosion can cause Anyone inside Provide a safety 3 1 3 Medium temperature inside the the building to the Power orientation/training to boiler can cause Explosion collapse/Damage Plant newcomers/operators. Ensure in Boiler equipment/staff there are no metallurgical failures inside the plant on the body of the boiler (cracks/holes). Keep the Roller gate completely open to reduce/dissipate the impact of the explosion on the walls/people inside Failure in controlling the Hot steam coming out Anyone near A routine check/maintenance on 3 2 6 High flow level inside a pipeline of ruptured can the damaged each pipe to detect any can cause boil/burn/harm the pipeline failures/damages such as valve Bursting/Rupturing of a skin/parts of body corrosion. Flow through each Pipeline valve/pipe must be monitored by trained personnel only Internal Explosion of a Heat can escape the Anyone A regular routine inspection on the 3 1 3 Medium Steam Turbine due to Steam Turbine system near/working Steam turbine system to detect Over-heating or failure of and hit the face of the on the Steam any equipment failures/damages. the Cooling process operator/someone turbine Use of PPE at all times (Coveralls can catch fire instead of lab coats) Electric burn/Electrocution Severe skin Anyone Wear long-sleeve shirts/Wear non- 3 1 3 Medium while inspection or burns/cuts if exposed near/operating electrical-conducting gloves to maintenance of the to sparks. Risk of an Electric minimize exposure to arc flashes to Electric panel Electric shock from panel (Staff hands/skin when working on minor to major hired for electrical panel. Keep a dry Maintenance) powder, CO2, fire extinguisher near the working space. Keep the panel dry/away from any water carrying pipes.