ip D 1784
TABLE 1 Class Requirements for Rigid Poly(Vinyl Chloride) (PVG) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
Nom: 1—The minimum property value will determine the cell number although the marimum expected value may fall within a higher cell
pe Cell Limits
Order | Property and Unit
Ne 0 1 2 a 4 5 6 tle toafofu
1 | Base resin Unspecified | palyonyt
chloride) | poly
hhomo- | (vinyl
polymer } chioride)
2 | Impact sirenath
(204), rnin
sim of natch unspecified | <34.7
fubin, of noteh <0.65
3 | Tensie strenatn,
min:
MPa unspecified 5
pi
4 | Modulus oF
clasticty in
‘ension, min:
MPa unspecified | <1930 2206 3034
pi 280 000 320 000 360 000 440 000
8 | Defiection
temperature
under load, rin
1.82 MPa
(264 psi
“C unspecified 100 Jno |120 J 120 | 140
F a2 | 230 | 251 | 266 | 284
Flammabiiity a = A a
All compounds covered by this specification, when tested in accordance with Test Method D 635, shall yield the following results: average extent of buming of <25 mm’
average time of buming of <10 s,