Professional Documents
Culture Documents
Foundation Design f1
Foundation Design f1
i) Input Data
Foundation Length ( L ) = 0.60 m
Foundation width ( B ) = 0.60 m
Depth of Foundation ( D ) = 0.45 m
Total height of foundation (S2) = 0.60 m
Ht.above the NGL to Top of Grout (S1) = 0.15 m
Safe bearing capacity of soil ( δ ) = 150.00 kN/m2
Gross Bearing pressure = 158.10 kN/m2
Comp.Strength of Conc. ( fc ) = 30.00 N/mm2
Yeild Strength of steel. ( fy ) = 414.00 N/mm2
Density of Soil ( Үs ) = 18.00 kN/m3
Density of Conc. ( Үc ) = 24.00 kN/m3
Vertical Load ( P1 ) = 11.85 kN
Load along X-axis ( Hx ) = 3.02 kN
Load along Z-axis ( Hz ) = 3.30 kN
Moment about - X ( Mx ) = 0.00 kN-m
Moment about - Z ( Mz ) = 0.00 kN-m
Coefficient of friction ( п ) = 0.4
Wt.of Conc.Base ( Wf ) = L x D x B x Yc
= 5.18 kN
Total Vertical Reaction ( P ) = Wf + P1
= 17.03 kN
iii)Moment at Base
2
= 152.77 kN/m HENCE SAFE
2
= -58.14 kN/m HENCE SAFE
iv)Stability Checks:
Factor of Safety Against overturning:
FOS = Resisting moment (RM)
Overturning moment (OM)
Resisting moment (RM) = P x (B/2)
= 5.11 KN-m
Overturning moment (OM) = Mx = 1.98 kN-m
Mz = 1.81 kN-m
FOS = RM
OM
= 2.58 > 1.8
HENCE SAFE
Factor of Safety Against sliding :
Resisting Force RF = Pxп
= 6.81 KN
2 2
Sliding Force SF = SOQT (Hx +Hz )
= 4.48 KN
FOS = RF
SF
= 1.52 > 1.5
HENCE SAFE
The minimum steel for the foundation shall be 0.0018% (As per ACI 318M - 11_Cl.7.12.2)
Reinforcement Provided:
Outer Face along length vertical 12 dia Rebars provided = 8.00 Nos.
Therefore, Total Steel Provided = 3.2 +12.82 = 16.02 > 0.99 kg (Reqd)
Hence, Reinforcement OK
From the presented analysis & design calculations it is concluded that the foundation sizes as shown in
design and reinforcement provided are adequate to carry the expected loading.