1JNL1241080 - Earthing and RFI Shielding For Valve Hall

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

information contained therein.

Reproduction, use
We reserve all rights in this document and in the

or disclosure to third parties without expressed


authority is strictly forbidden. © ABB AB (SE)
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022

Rev Revision Prepared Approved Date

Based on - Project name

Prepared Madanraj V P
Approved
Saudi- Egypt HVDC ±500kV Link
Philip Angelo J
Doc. Kind General Drawing
Madinah & Tabuk Station
Drawing Title Status Item designation

Earthing and RFI -


Shielding Valve Hall Resp dept Rev ind Language -
Document number and Title

Hitachi Energy 1JNL1241080 - Earthing and RFI


© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 1 /9
(A4)
NOTES
1. THE REQUIREMENTS SHOWN IN
THIS DRAWING ARE ONLY RELATED
TO RFI/EMC AND EARTHING.
THIS NEED TO BE COORDINATED
WITH MANUFACTURERS
INSTALLATION PROCEDURES.

1
6

VALVE COOLING PIPES

2500

SELF TAPPING SCREWS c/c MAX 2500 mm


AT PANEL JOINTS.
SELF TAPPING SCREWS 2 SELF TAPPING SCREW SMD01ZX 4.8x19
PER ELEMENT AND SIDE OR SIMILAR. NO WASHER TO BE USED.

FOR EMC SEALING


OF DOOR SEE
DRAWING 106

2
9

BUILDING RING CONDUCTOR

1
5 STEEL SHEET CONNECTED TO
WALL PANEL WITH SELF TAPPING
SCREWS MAX c/c 2500 mm
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed

WALL VALVE HALL


1 1 : 25
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

Based on - Project name

Prepared
Madanraj V P Saudi- Egypt HVDC ±500kV Link
Approved
Philip Angelo J Madinah & Tabuk Station
Doc. Kind General Drawing
Title Status Item designation
Wall Inside Valve Hall -
Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 2 /9
(A1)
OUTSIDE INSIDE
information contained therein. Reproduction, use
We reserve all rights in this document and in the

or disclosure to third parties without expressed


authority is strictly forbidden. © ABB AB (SE)

SELF TAPPING SCREW TO


ENSURE CONNECTION
MAX c/c 2500 mm.
SELF TAPPING SCREW
SMD01ZX 4.8x19 OR SIMILAR.
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

102
1 1:2

A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022

Rev Revision Prepared Approved Date

Based on - Project name

Prepared Madanraj V P
Approved
Saudi- Egypt HVDC ±500kV Link
Philip Angelo J
Doc. Kind General Drawing
Madinah & Tabuk Station
Drawing Title Status Item designation

Horizontal Panel Joint -


Resp dept Rev ind Language -
Document number and Title

Hitachi Energy 1JNL1241080 - Earthing and RFI


© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 3 /9
(A4)
OUTSIDE 6

5
information contained therein. Reproduction, use
We reserve all rights in this document and in the

or disclosure to third parties without expressed


authority is strictly forbidden. © ABB AB (SE)

GALVANIZED STEEL
SHEET MIN 3mm
This document is issued by means of a computerized

THICK
approved. The approved document has a name and
system. The digitally stored original is electronically

1
A manual signature is not required.
date entered in the approved-field.

SELF TAPPING SCREWS TO


ENSURE CONNECTION

103 INSIDE
1 1:2
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022

Rev Revision Prepared Approved Date

Based on - Project name

Prepared Madanraj V P
Approved
Saudi- Egypt HVDC ±500kV Link
Philip Angelo J
Doc. Kind General Drawing
Madinah & Tabuk Station
Drawing Title Status Item designation

Panel Joint Column -


Resp dept Rev ind Language -
Document number and Title

Hitachi Energy 1JNL1241080 - Earthing and RFI


© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 4 /9
(A4)
4
5

3
5
SELF TAPPING SCREWS IN FLASHING TO ENSURE CONNECTION,
OVERLAPPING SHEETS, SELF TAPPING SCREWS MAX c/c 2500
MAX c/c 2500 mm ROOF RIDGE DETAIL
4 1:5

FLASHING TO ENSURE CONNECTION WITH WALL


PANEL.
2 SELF TAPPING SCREWS ON EVERY ELEMENT
OR MAX c/c 2500 mm
FLASHING TO ENSURE CONNECTION
BETWEEN WALL PANEL AND ROOF.
SELF TAPPING SCREWS MAX c/c 2500 mm

ROOF DETAIL EAVES WALL CORNER


3 1:5
6 1:5

2
5

5
5
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed

WALL PANEL CONNECTION TO BE


CONNECTION TO WALL PANEL WELDED TO REINFORCEMENT AT
WITH SELF TAPPING SCREWS MIN 2 PLACES
MAX c/c 2500 mm

STEEL SHEET,
REINFORCEMENT TO BE
THICKNESS MIN 5 mm MAX c/c 1200
WELDED TOGHETER
MAX c/c 1200 mm
WALL SECTION
1
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

1 : 25
WELDED TO REINFORCEMENT,
MAX c/c 2500 mm
A manual signature is not required.
date entered in the approved-field.

SLAB WALL DETAIL PLAN DETAIL OF REINFORCEMENT Based on - Project name

2 1:5
5 1 : 25
Prepared

Approved
Madanraj V P
Philip Angelo J
Saudi- Egypt HVDC ±500kV Link
Madinah & Tabuk Station
Doc. Kind General Drawing
Title Status Item designation
Details Roof Slab -
Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 5 /9
(A1)
2 4

6 6

VALVE HALL

3 3
6 6

CONNECTED TO EARTHING POINT

FRONT VIEW VERTICAL SECTION


1 1:5
2 1:5

VALVE HALL
4
2
6
6

CUTS IN FLASHING SLEEVE TO ALLOW FOR


COMPRESSION OF KNITTED EMC GASKET
TO PIPE USING HOSE CLAMP.

3
6

VALVE HALL
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed

-METAL SHEET WITH SELF TAPPING SCREW


MAX c/c 300 mm.
-SEALING
-VAPOR BARRIER SQUEEZD BEHIND METAL
SHEET. TAPED AROUND PIPES.

CONNECTED TO EARTHING POINT


This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

HORIZONTAL VERTICAL SECTION THROUGH PIPE


3 1:5
4 1:5

Based on - Project name

Prepared
Madanraj V P Saudi- Egypt HVDC ±500kV Link
Approved
Philip Angelo J Madinah & Tabuk Station
Doc. Kind General Drawing
Title Status Item designation
Valve Cooling Pipes -
Penetration Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 6 /9
(A1)
NOTES
1. THE REQUIREMENTS SHOWN IN
THIS DRAWING ARE APPLICAPLE
FOR ALL DOOR IN EMC/RFI ZONES.

2. DOORS TO EMC/RFI ZONE TO BE


OF STEEL.

3. THIS DRAWING IS APPLICABLE TO


DOORS SMALLER THAN 4x4m.

EARTHING CONDUCTOR

RFI JUMPER
NOTE: LENGHT OF APERTURES
AROUND DOORS SHALL BE
MAXIMUM 4 m.

EARTH LUG 35 mm2 CONNECTED


TO CLOSEST EARTHED STEEL
COLUMN OR CU-BAR

EARTHING LUG 35 mm2 BETWEEN


DOOR LEAF AND FRAME

EMC/RFI JUMPER 35 mm2 TO ENSURE


CONNECTION BETWEEN DOOR LEAF AND
CLADDING. MAXIMUM DISTANCE 4m BETWEEN
CONNECTION POINTS.

DOUBLE DOOR MAX 4x4m


1 1 : 20

EARTHING LUG 35 mm2 BETWEEN


DOOR LEAF AND FRAME

BUILDING RING CONDUCTOR


TO BE ROUTED ABOVE DOOR.
JOINTS TO BE BOLTED
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

EARTH LUG 35 mm2 CONNECTED


TO CLOSEST EARTHED STEEL
A manual signature is not required.
date entered in the approved-field.

COLUMN OR CU-BAR

Based on - Project name

Prepared
Madanraj V P Saudi- Egypt HVDC ±500kV Link
PERSONNEL DOOR MAX 1,5x2,5m Approved

Doc. Kind
Philip Angelo J
General Drawing
Madinah & Tabuk Station
2 1 : 10
Title Status Item designation
Doors -
Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 7 /9
(A1)
EARTHING CONDUCTOR

EARTHING GRID
PERIMETER
WIRE

BUILDING RING
CONDUCTOR (BRC)
BRC TO BE ROUTED ABOVE 1 BRC TO BE ROUTED ABOVE
DOOR OPENING 9 DOOR OPENING
EARTH TAPE

BURIED EARTH TAPE

SERVICE BUILDING

VALVE MAINTENANCE EARTHING,


SEE MECHANICAL DRAWINGS
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed

EARTHING GRID PERIMETER WIRE EARTHING OF CLADDING MAX c/c 10m


CONDUCTOR WELDED TO PERIMETER WIRE
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

EARTHING BUILDING
1 1 : 100

Based on - Project name

Prepared
Madanraj V P Saudi- Egypt HVDC ±500kV Link
Approved
Philip Angelo J Madinah & Tabuk Station
Doc. Kind General Drawing
Title Status Item designation
Earthing Of Building -
Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 8 /9
(A1)
CLADDING CONNECTED AT MAX
c/c 10 m AND IN EVERY CORNER CONDUCTOR FROM PERIMETER
WIRE BOLTED TO BRC. MAX c/c 10 m

ALL STEEL COLUMNS TO BE CONNECTED TO BRC

CLAMPED TO REINFORCEMENT WITH 2 C-CLAMPS. MAX c/c 10m


CONDUCTOR INSULATED OR WRAPPED IN DENSO TAPE
CLAMP AND WIRE WRAPPED IN DENSO TAPE AT CLAMP

CONDUCTOR IN CONDUIT OR WRAPPED IN DENSO TAPE


PERIMETER WIRE
BURIED CONDUCTOR

DETAIL
1 1:5

TINNED CABLE LUG


M12 BOLT
M12 NUT
3
2 x LOCK WASHER
9
TYPCIAL BRC SIZE
MIN 100 40X6 FOR MADINAH
30X6 FOR TABUK

JOINTS IN BRC TO OVERLAP WITH MINIMUM 100 mm


AND TO BE BOLTED WITH 2 SET OF:
M12 BOLT

300
M12 NUT
TYPICAL SIZE 95 mm2 PLAIN WASHER
SPRING WASHER.

CONDUCTOR TO REINFORCEMENT TYPICAL SIZE 240 mm2

CONDUCTOR TO PERIMETER WIRE TYPCIAL SIZE 240 mm2


BUILDING RING CONDUCTOR NOTE:
2 1:5 CONDUCTOR SIZE TO BE CHECKED AND VERIFIED.
SEE STATION EARTHING DEMANDS
information contained therein. Reproduction, use
We reserve all rights in this document and in the

authority is strictly forbidden. © ABB AB (SE)


or disclosure to third parties without expressed

JOINTS IN BRC TO OVERLAP WITH MINIMUM 100 mm


AND TO BE BOLTED WITH 2 SET OF:
M12 BOLT
M12 NUT
PLAIN WASHER
SPRING WASHER.
This document is issued by means of a computerized

approved. The approved document has a name and


system. The digitally stored original is electronically

A manual signature is not required.


date entered in the approved-field.

BRC COLUMN INTERFACE


3 1:5 Based on - Project name

Prepared
Madanraj V P Saudi- Egypt HVDC ±500kV Link
Approved
Philip Angelo J Madinah & Tabuk Station
Doc. Kind General Drawing
Title Status Item designation
Earthing Details -
Resp dept
PGGI/DCHUBTPC Rev ind Language -
A FIRST ISSUE Madanraj V P Philip Angelo J 30-06-2022 Document number and Title
Hitachi Energy 1JNL1241080 - Earthing and RFI
Rev Revision Prepared Approved Date
© 2022 Hitachi Energy All Rights Reserved shielding Valve Hall Sheet/of 9 /9
(A1)

You might also like