This document outlines regulations for issuing personal protective equipment (PPE) to workers on the CCECC/LRMT Redline Project. It lists 16 types of PPE including hard hats, safety boots, reflective vests, gloves for various tasks, welding shades, eye and ear protection, masks, safety belts, and rain boots. It specifies the proposed duration each item should last and notes they must be replaced if worn out. Fines are listed if PPE are returned before the stipulated time periods.
This document outlines regulations for issuing personal protective equipment (PPE) to workers on the CCECC/LRMT Redline Project. It lists 16 types of PPE including hard hats, safety boots, reflective vests, gloves for various tasks, welding shades, eye and ear protection, masks, safety belts, and rain boots. It specifies the proposed duration each item should last and notes they must be replaced if worn out. Fines are listed if PPE are returned before the stipulated time periods.
This document outlines regulations for issuing personal protective equipment (PPE) to workers on the CCECC/LRMT Redline Project. It lists 16 types of PPE including hard hats, safety boots, reflective vests, gloves for various tasks, welding shades, eye and ear protection, masks, safety belts, and rain boots. It specifies the proposed duration each item should last and notes they must be replaced if worn out. Fines are listed if PPE are returned before the stipulated time periods.
PERSONAL PROTECTIVE EQUIPMENT (PPE’S) ISSUANCE REGULATION
S/N PPE’S PROPOSED REMARK DURATION 1 Hard hat (Helmet) 1 (one) year Applicable to all section 2 Safety boot 6 (six) months Applicable to all section 3 Reflective vest 6 (six) months Applicable to all sections 4 4 Overall (cloth) 1 (one) year To be issued to welders 5 Leather gloves for hot No limit To be issued to welders. The replacement work depends on the usage of this PPE’s, it must be adequately replaced whenever it gets worn out to curb probable burning of the hand by the welding flame. 6 Hand gloves for iron 7 (seven) days To be issued to iron benders and scaffolders works and any other iron work operation 7 Hand gloves for 7 (seven) days To be issued to personnel involved in any carpenters wood work to curb hand injury 8 Rubber hand glove 7 (seven) days To be issued to personnel involved in any cement work, chemical handling and etc 9 Welding shade No limit To be issued to welders. The replacement depends on the usage of this PPE’s, it must be adequately replaced whenever it gets worn- out to curb potential eye injury 10 Eye protection 2 (two) months To be issued to personnel involved in any cutting work, grinding work and any other works that have the potential to cause eye injury. 11 Ear protection 21 (twenty-one To be issued to personnel involved in any noisy days) days and vibration work 12 Clinical nose mask No limit To guide against dust, welding and grinding fumes, chemical odor and also serve as protection against Covid-19 disease. The replacement depends on the usage and weakness of the PPE’s. 13 Respiratory nose mask No limit To guide against dust, welding and grinding fumes, chemical odor etc. to be issued to personnel to curb the aforementioned in poor ventilated area. The replacement depends on the usage of the PPE’s and the weakness of the air filter section. 14 Safety belt 1 (one) year To be issued to personnel involved in any construction work at height 15 Rain boot – 1 1 (one) year To be issued to regular personnel involved in any construction work in wet area. Provision for borrow and return will also be made for personnel frequently executing task in wet area to ensure the enforcement of task required PPE’s. the concerned supervisor will be the custodian of the borrow and return PPE’s. 16 Rain boot – 2 2 (two) months Only to be issued to personnel involved in any cement work. To ensure replacement of PPE’s, the worn-out PPE’s must be presented to the person in charge of issuing PPE’s. Cost (fine) will be attached if the stipulated period has not elapse and the fine goes as follows;-
S/N PPE equipment Stipulated time Cost (fine) in naira
1 HARD HAT (HELMET) Below 6 months 1500 6 months and above but below 7 750 months 7 months and above but below 8 625 months 8 months and above but below 9 500 months 9 months and above but below 10 375 months 10 months and above but below 11 250 months 11 months and above but below 12 125 months 2 SAFETY BOOT Below 1 month 3000 1 month and above but below two 2000 months 2 months and above but below 3 1500 months 3 months and above but below 4 1000 months 4 months and above but below 5 500 months 5 months and above but below 6 500 months 3 REFLECTIVE VEST Below 3 months 500 3 months and above but below 4 250 months 4 months and above but below 5 150 months 5 months and above but below 6 100 months 4 OVERALL Below 6 months 2500 6 months and above but below 7 1250 months 7 months and above but below 8 1050 months 8 months and above but below 9 850 months 9 months and above but below 10 620 months 10 months and above but below 11 420 months 11 months and above but below 12 250 months 5 EAR PROTECTION When misplaced before 21 days 100 6 SAFETY BELT Below 6 months 2000 6 months and above but below 7 1000 months 7 months and above but below 8 850 months 8 months and above but below 9 680 months 9 months and above but below 10 500 months 10 months and above but below 11 350 months 11 months and above but below 12 180 months