Professional Documents
Culture Documents
Formulation Guide Household
Formulation Guide Household
FORMULATION GUIDE
TABLE OF CONTENT
L AUNDRY BATHROOM
LAUNDRY DETERGENT “UNIVERSAL” 4 ECOFRIENDLY TILE & BATH CLEANER 20
FLOOR CLEANER 14
SPECIAL
GLASS CLEANER 16
SHOE REFRESHER SPRAY 32
TRAFFIC FILM REMOVER 18
FABRIC REFRESHER “ODOUR NEUTRALIZER” 34
INSTITUTIONAL CLEANER “ODOUR ABSORBING” 19
3
F O R M U L AT I O N G U I D E
A Water 85.90
B Carboxymethyl Cellulose 0.50
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH)
Alcohol Alkoxylate 3.50
Coconut Fatty Acid 2.50
C
POLYFIX ZRC 30 MT
Zinc Ricinoleate 2.50
(Schill+Seilacher GmbH)
GLDA, 47.5 % 2.00
Defoamer 0.10
4
D Sodium Hydroxide, 10 % qs to pH
E Fragrances, Colour, etc. qs
MANUFACTURING PROCEDURE
n Heat Part A up to 50 °C
n Maintain temperature and add Part B while stirring
n Homogenize
n Cool down to room temperature while stirring
n Add Part C in listed order
n Check pH-value and adjust with Part D while stirring
n Add Part E
PROPERT Y
Appearance: turbid, viscous liquid
pH-value: 8.0 – 9.5
5
F O R M U L AT I O N G U I D E
Water 81.50
A
Acrylates Copolymer, 30 % 5.00
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH)
PERLASTAN SCG 50
Disodium Cocoyl Glutamate, 50 % 2.50
(Schill+Seilacher GmbH)
B Alcohol Alkoxylate 3.50
Glycerin 2.00
Optical Brightener 0.50
GLDA, 47.5 % 2.00
6
C Sodium Hydroxide, 10 % qs to pH
D Fragrances, Colour, etc. qs
MANUFACTURING PROCEDURE
n Mix Part A
n Add Part B and mix until formulation is homogeneous
n Check pH-value and adjust with Part C while stirring
n Add Part D
PROPERT Y
Appearance: white, turbid, viscous liquid
pH-value: 8.0 – 9.5
7
F O R M U L AT I O N G U I D E
Water 83.00
A TEA Esterquat 11.20
Calcium Chloride 0.30
POLYFIX ZRC 25 GP
Zinc Ricinoleate 5.00
B (Schill+Seilacher GmbH)
Glutaraldehyde 0.50
C Citric Acid qs to pH
D Fragrances, Colour, etc. qs
MANUFACTURING PROCEDURE
n Mix Part A in listed order
n Add Part B and mix until formulation is clear
n Check pH-value and adjust with Part C while stirring
n Add Part D
PROPERT Y
Appearance: light yellowish, turbid, viscous liquid
pH-value: 2.0 – 3.5
9
F O R M U L AT I O N G U I D E
Water 58.50
A
Potassium Hydroxide, 45 % 2.30
Myristyldimethylamine Oxide, 25 % 2.00
PERLASTAN L-30
B Sodium Lauroyl Sarcosinate, 30 % 0.50
(Schill+Seilacher GmbH)
Sodium Hypochlorite, 15 % 36.70
Water 81.50
A Propylene Glycol n-Butyl Ether 5.00
Potassium Hydroxide, 45 % 5.00
PERLASTAN C-30
Sodium Cocoyl Sarcosinate, 30 % 3.50
(Schill+Seilacher GmbH)
B
Alcohol Alkoxylate 3.00
GLDA, 47.5 % 2.00
C Fragrances, Colour, etc. qs
n Add Part C
F O R M U L AT I O N G U I D E
Water 90.20
A Propylene Glycol n-Butyl Ether 3.00
Sodium Hydroxide, 10 % 0.50
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 1.50
(Schill+Seilacher GmbH)
B
Isopropyl Alcohol, 99 % 5.00
Lauryldimethylamine Oxide, 30 % 1.20
C Fragrances, Colour, etc. qs
12
13
F O R M U L AT I O N G U I D E
FLOOR CLEANER
Part Active Ingredient Tradename (Supplier) % w/w
Water 94.50
A Propylene Glycol 0.50
GLDA, 47.5 % 2.00
PERLASTAN C-30
B Sodium Cocoyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH)
C Citric Acid qs to pH
D Fragrances, Colour, etc. qs
14
MANUFACTURING PROCEDURE
n Mix Part A in listed order
n Add Part B to Part A and mix until
formulation is clear
n Adjust pH-value with Part C while stirring
n Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 6.5 – 7.5
15
F O R M U L AT I O N G U I D E
GLASS CLEANER
Part Active Ingredient Tradename (Supplier) % w/w
Water 87.25
Isopropyl Alcohol 10.00
A PERLASTAN M-30
Sodium Myristoyl Sarcosinate, 30 % 0.75
(Schill+Seilacher GmbH)
Propylene Glycol n-Butyl Ether 2.00
B Fragrances, Colour, etc. qs
16
MANUFACTURING PROCEDURE
n Mix Part A until formulation appears homogeneous
n Add Part B
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 7.0 – 8.0
17
F O R M U L AT I O N G U I D E
Aqua 85.00
Isopropyl Alcohol 7.00
A POLYFIX ZRC 30 MT
Zinc Ricinoleate 5.00
(Schill+Seilacher GmbH)
PERLASTAN L-30
Sodium Lauroyl Sarcosinate 3.00
(Schill+Seilacher GmbH)
19
F O R M U L AT I O N G U I D E
Water 91.80
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH)
A
Coco Glucoside, 52 % 1.50
Sodium Citrate 4.50
GLDA, 47.5 % 0.20
B Citric Acid qs to pH
C Fragrances, Colour, etc. qs
20
while stirring
n Add Part C
21
F O R M U L AT I O N G U I D E
VISCOUS WC CLEANER
Part Active Ingredient Tradename (Supplier) % w/w
Water 72.50
A
Sodium Hydroxide, 50 % 3.00
Myristyldimethylamine Oxide, 25 % 1.50
PERLASTAN L-30
B Sodium Lauroyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH)
Sodium Hypochlorite, 15 % 20.00
C Fragrances, Colour, etc. qs
22
23
F O R M U L AT I O N G U I D E
A Water 75.00
B Carbomer 2.00
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 5.00
(Schill+Seilacher GmbH)
Sodium Laureth Sulfate, 30 % 15.00
C
POLYFIX ZRC 30 MT
Zinc Ricinoleate 2.00
(Schill+Seilacher GmbH)
MGDA, 40 % 1.00
D Sodium Hydroxide, 10 % qs to pH
Preservatives qs
E 24
Fragrances, Colour, etc. qs
MANUFACTURING PROCEDURE
n Heat Part A up to 50 °C
n Maintain temperature and add Part B while stirring
n Mix until preparation appears homogeneous
n Cool down to room temperature while stirring
n Add Part C in listed order
n Adjust pH-value with Part D to pH 8.0 – 9.0
n Add Part E
PROPERT Y
Appearance: clear, colourless gel
pH-value: 8.0 – 9.0
25
F O R M U L AT I O N G U I D E
Water 74.30
A
MGDA, 78 % 0.20
Sodium Laureth Sulfate, 28 % 15.00
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH)
B
Cocamidopropyl Betaine, 38 % 1.50
Glycerin 2.00
Ammonium Chloride 5.00
C Citric Acid qs to pH
D Fragrances, Colour, etc. qs 26
MANUFACTURING PROCEDURE
n Mix Part A in listed order
n Add Part B in listed order to Part A
PROPERT Y
Appearance: clear, colourless, viscous liquid
pH-value: 5.5 – 6.5
27
F O R M U L AT I O N G U I D E
Water 78.60
A PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH)
B Alcohol Alkoxylate 19.40
C Fragrances, Colour, etc. qs
28
MANUFACTURING PROCEDURE
n Mix Part A
n Add Part B to Part A and mix until formulation
appears homogeneous
n Add Part C
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 6.5 – 7.5
29
F O R M U L AT I O N G U I D E
OVEN CLEANER
Part Active Ingredient Tradename (Supplier) % w/w
Water 79.00
A Sodium Hydroxide, 10 % 15.00
GLDA, 47.5 % 2.00
PERLASTAN L-30
B Sodium Lauroyl Sarcosinate, 30 % 4.00
(Schill+Seilacher GmbH)
C Sodium Hydroxide, 10 % qs to pH
D Fragrances, Colour, etc. qs
30
31
F O R M U L AT I O N G U I D E
Water 95.90
A POLYFIX ZRC 30 MT
Zinc Ricinoleate 3.00
(Schill+Seilacher GmbH)
Alcohol Alkoxylate 1.00
B
Preservative 0.10
C Fragrances, Colour, etc. qs
32
MANUFACTURING PROCEDURE
n Mix Part A
n Add Part B and mix until formulation
appears homogeneous
n Add Part C
PROPERT Y
Appearance: colourless, clear liquid
33
F O R M U L AT I O N G U I D E
Water 85.00
A POLYFIX ZRC 25 GP
Zinc Ricinoleate 5.00
(Schill+Seilacher GmbH)
B Ethanol 10.00
C Fragrances, etc. qs
34
MANUFACTURING PROCEDURE
n Mix Part A
n Add Part B while stirring
n Homogenize while stirring
n Add Part C
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 9.5 – 10.5
35
Any Questions?
Our service team will be pleased to answer any questions
and assist you with advice and information. We can also
provide you with contact data of our local offices, distributors
and agencies. Data sheets and samples of our products
are available upon request.
Schill+Seilacher GmbH
Schoenaicher Strasse 205
71032 Boeblingen (Germany)
Phone: + 49 7031 282-241
Fax: + 49 7031 282-446
KHM02.2017
E-Mail: surfactants@schillseilacher.de