Professional Documents
Culture Documents
JP Jensen General
JP Jensen General
Coupling A – JP Zip-joints: Both duct ends made with a slit zipper (nylon zipper) of heavy duty type.
Protection-sleeve which on the outside protect the zipper and on the inside seals the joint according to the principle “the higher
pressure the tighter joint”.
Coupling B – JP steel clamps: One end of each duct length is fitted with a steel ring, vulcanized to the fabric.
One steel clamp made of galvanized 1,5 mm steel with locking device (threaded crank) closes the joint.
Coupling C – JP Velcro-joints: Both duct ends made with a Velcro of heavy duty type.
Protection-sleeve which on the outside protect the Velcro and on the inside seals the joint according to the principle “the higher
pressure the tighter joint”
Every duct length is marked with information quality, length, diameter, bursting pressure point and manufacturing date.
JP 551 FR JP 651 FR JP 753 FR JP 651 FRA
Yellow Yellow White Black & White
Base fabric: Polyester
Yarn thickness: (dtex) 1100 1430 1430 x 2200 1430
Yarn / inch: Warp 12 12 20 12
Weft 12 12 20 12
Coating: Plasticized PVC
Tensile strength: (N/5 cm) Warp 1700 2100 2350 2100
(DIN 53354) Weft 1700 2100 2550 2100
Tear strength: (N) Warp 400 500 500 500
(DIN 53363) Weft 400 500 700 500
Welding strength: (N/5 cm) (DIN 53 357) 1550 1900 2200 1900