Professional Documents
Culture Documents
Protocols of Au NPs
Protocols of Au NPs
Protocols of Au NPs
µl
5.07mM 149.3622mM 20.37Mm
Preparation of PS-P2VP Micelles.” different concentrations were tried out and characterized by DLS and
STEM”
1- Add 4.2 mg of the polymer into 1 ml of O-Xyelene
2- Leave the mix overnight to solubilize and form micelles.
Substates were cleaned first by using ETOH in bath sonication for 10 min and then same time in water
and finally in iso-propanol. Lastly, we clean the substrates in plasma chamber for 10 min to be ready and
active for coating step.
Coating the micelles onto the substrate was done by adding 30 µl of the micelles into the previously cleaned
Si substrates for 60 sec.
Code Description
Bebo-001-Au-Oleyl Au-Oleylamine: reduction process in o-Xyelene and now the stock is I cyclohexane
5mg/ml
Bebo-002-Au-Cit Au-Citric acid reduction “old Particles”
Bebo-001-Au-Oleyl supernatant Au-Oleylamine: reduction process in o-Xyelene, supernatant after precipitation
Bebo-003-Au-SiO2 Au SiO2 NPs coated Igepal using NH4OH (NPs 5mg Igepal 150 mg TEOS 15 mg )
Bebo-004-Au-Oleyl Au SiO2 NPs coated Igepal using NH4OH (NPs 5mg Igepal 460.78 mg TEOS 21.22 mg )
Bebo-005-Au-Oleyl Au-Oleylamine: reduction process in o-Xyelene
Bebo-006-Au-Oleyl Au SiO2 NPs coated Igepal using NH4OH
For THF annealing step, it has been performed in different times and we concluded that 10 min is
suitable for annealing.
For immersing the substrate coated with micelles after annealing in gold NPS, we also tried different
concentration and different times and we found some aggregation problems ,that is why we shifted from
using NPs to using Au sat directly.