Design of Special Confining Hoops for C1

Column width ( YD ) = 375 mm

Column Depth ( ZD ) = 375 mm
Characteristic strength of concrete, fck = 30 N/mm2
Characteristic strength of steel, fy = 500 N/mm2

Column length along Ly = 4.5 m

Column length along Lz = 4.5 m
Clear cover for column, d' = 40 mm

no of bars and dia of bar 4 20 mm

no of bars and dia of bar 8 16 mm

Steel Area provided, Ast prov = 2865 mm2

provided steel percentage, Pt prov = 2.04 %

Provide 4 no's of 20mm dia and 8 no's of 16mm dia Fe-500 bars

Design of Lateral ties

required diameter of lateral tie = 5 mm

provided diameter of lateral tie = 8 mm

Spacing of ties should be minimum of following values

least lateral dimension of column = 375 mm
16 * dia of smallest longitudinal bar = 256 mm
max spacing = 300 mm

provided spacing of ties = 150 mm

Safe
Provide 8mm dia lateral ties at 150mm c/c

Design of Special Confining Hoops :

(As per Clause 7.4 of IS13920)
As per Clause 7.4.1 of IS 13920:1993, special confining reinforcement shall be
provided over a length Lo, where flexure yielding may occur.

> 375 mm larger lateral dimension of member.

Lo > 750 mm 1/6 th of clear span
> 450 mm
Provide confining reinforcement for a length Lo of 750 mm from each joint face
towards midspan.

As per Clause 7.4.2 of IS 13920 : 1993 , special confining reinforcement shall

extend for minimum 300 mm into the footing.

As per Clause 7.4.6 of Is 13920: 1993, the spacing , S, of special confining

reinforcement is governed by :
As per Clause 7.4.6 of Is 13920: 1993, the spacing , S, of special confining
reinforcement is governed by :

= 93.75 mm 1/4 th of minimum dimension of cloumn

Maxium spacing of confining Stirrups, S shall be
minimum of > 96 mm 6 times diameter of smallest longitudinal reinf
≤ 100 mm
Provide confining reinforcement at a spacing of 93.75 mm for a length of Lo.
(As per Clause 7.4.8 of IS13920)
Sv = 93.75 mm
longer dimension of the rectangular confining hoop, h = 107.66667 mm
Area of Concrete Core, Ak = 96721 mm2

Cross-sectional area of bar forming rectangular = 49.48 mm2

Stirrups, Ash

Assume dia of hoops = 8 mm

Provide 8 mm dia confining stirrup @ 93.75 mm c/c spacing for a length of Lo.
ion of member.
mension of cloumn
mallest longitudinal reinforcement bars