Professional Documents
Culture Documents
Kompernass Lervia KH 4000 Operation Manual 120420
Kompernass Lervia KH 4000 Operation Manual 120420
Kompernass Lervia KH 4000 Operation Manual 120420
Operating instructions
y u i
q w e r t
o
a
s
2%
2$
2# h d
2@ j
2!
f
g
2) ; l k
Lervia KH 4000
Keep this manual for future reference and pass it on with the equipment to any future users.
-3-
Lervia KH 4000
-4-
Lervia KH 4000
-5-
Lervia KH 4000
6. Setting up
7. Switching On / Off
-6-
Lervia KH 4000
8. Threading
Warning:
i Make sure that the sewing mahine is switched
off and the plug has been pulled out of the
socket when threading in order to avoid injury
if the sewing machine should be accidentally
switched on.
-7-
Lervia KH 4000
2@
18a
1*
1*
-8-
Lervia KH 4000
1*
18c
18b
18d
-9-
Lervia KH 4000
1*
”
2@
- 10 -
Lervia KH 4000
t i
e
2$
; r
19a
19b
j
To pass in the upper thread, it is not necessary • You can place a felt pad
underneath the
to open the front of the sewing machine. The spool of thread, so that the bobbin runs
illustration is for guidance only. Before you begin evenly.
threading, turn the handwheel s anti-clockwise
to position the threading hook e in the upper- • Guide the thread through the upper thread
most position. Use the foot lever j to raise the guide t, ...
needle retainer ; .
• over the selector wheel for the upper thread
• Pull out one of the two thread spool carriers tension r, ...
i on top and place a spool of thread there.
• underneath the tension 2$ spring, ...
- 11 -
Lervia KH 4000
- 12 -
Lervia KH 4000
9. Attaching accessories
Warning:
Make sure that the sewing machine is switched
off and the plug has been pulled out of the sok-
ket to prevent accidents caused by un-intentional
switching on.
a) Changing needles
- 13 -
Lervia KH 4000
- 14 -
Lervia KH 4000
10. Settings
- 15 -
Lervia KH 4000
s "0" straight
"1" narrow
"5" wide
- 16 -
Lervia KH 4000
11. Sewing
b) To start a seam
- 17 -
Lervia KH 4000
- 18 -
Lervia KH 4000
g) Straight stitch
This is the most frequently used type of stitch.
The zigzag sewing foot is used for both straight
and zigzag stitches. A smaller size of stitch should
be selected for sewing finer materials.
h) Zigzag
The zigzag stitch is universal. The zigzag stitch
pattern consists of short stitches set closely after
one another and is suitable for sewing initials,
figures, appliqués etc.
- 19 -
Lervia KH 4000
A Straight stitch
0
G Blind hem 3-5
Three-step zigzag
H 3-5
stitch
L 3-fold zigzag
2-5
R-T Buttonhole 5
- 20 -
Lervia KH 4000
j) Blind hem
- 21 -
Lervia KH 4000
k) Material-Thread-Needle Table
Presser foot
Material Thread Needle Stitch length Upper thread tension
pressure
Straight
See p. 16 ZZ
stitch
Stitch length
selection
Cotton
Light Nylon
80
Man-made
Cotton 70
fibre
jersey 60 (10)
1 1-3 1-4
Silk
Silk
50
Man-made
80
Woll-silk fibre
(12)
50 silk
Cotton 80-90
Middle Poplin
60-80 (12-14)
Man-made
Fine Jersey fibre 2 0.5-3 0.5-4
60 80
(12)
Silk
Gabardine
50
Cotton 90-100
Heavy Denim
50 (14-16)
Man-made
80-90
Jersey fibre 3 0.5-3 0.5-4
(12-14)
50
Silk 80-90
Tweed
50 (12-14)
- 22 -
Lervia KH 4000
l) Seam guide
m) Overcast stitch
H, I, J
n) Stretch seams
M, L
- 23 -
Lervia KH 4000
o) Sewing buttonholes
p) Buttonhole table
- 24 -
Lervia KH 4000
q) Sewing on buttons
• Lay the button between the button foot
and the material and lower the button
foot down.
r) "Edge-to-edge" sewing
K H
s) Decorative stitches
N O P Q
- 25 -
Lervia KH 4000
t) Sewing a zipper
- 26 -
Lervia KH 4000
v) Embroidery
w) Thread cutter
When you have completed a seam, or if you
wish to cut the threads for any other reason:
• Simply pull the thread over the sharp blade
above the needle retainer ; to cut off the
thread.
- 27 -
Lervia KH 4000
12. Care
Warning:
Make sure that the sewing machine is switched
off and the plug has been pulled out of the
“ socket to prevent accidents caused by uninten-
tional switching on.
- 28 -
Lervia KH 4000
Danger!:
Important!
Apply the oil very sparingly. Excessive oil on
the working parts can soil the thread and
your fabrics.
- 29 -
Lervia KH 4000
Material is not being moved Stitch length wheel set to "0"? Set it at a value from "1“ to "4".
through
Is the contact pressure of the sewing Increase the contact pressure of
foot too low? the sewing foot!
- 30 -
Lervia KH 4000
15. Disposal
- 31 -
Lervia KH 4000
- 32 -
ID Nr.: KH4000-05/05-V4
Kompernaß GmbH
Burgstrasse 21 · D-44867 Bochum
www.kompernass.com