This document lists technical specifications and standards for pad-mounted compartment-type transformers. It references several ANSI and IEEE standards related to liquid-immersed distribution transformers, pad-mounted equipment, transformer loading, dielectric breakdown voltage testing, PCB analysis, and manually operated subsurface switches. It also lists standards for transformer requirements, test codes, loading guides, and surface preparation for painting steel surfaces.
This document lists technical specifications and standards for pad-mounted compartment-type transformers. It references several ANSI and IEEE standards related to liquid-immersed distribution transformers, pad-mounted equipment, transformer loading, dielectric breakdown voltage testing, PCB analysis, and manually operated subsurface switches. It also lists standards for transformer requirements, test codes, loading guides, and surface preparation for painting steel surfaces.
This document lists technical specifications and standards for pad-mounted compartment-type transformers. It references several ANSI and IEEE standards related to liquid-immersed distribution transformers, pad-mounted equipment, transformer loading, dielectric breakdown voltage testing, PCB analysis, and manually operated subsurface switches. It also lists standards for transformer requirements, test codes, loading guides, and surface preparation for painting steel surfaces.
ANSI/ IEEE C57.12.00 Standard General Requirements for Liquid Immersed
Distribution, Power, and Regulating Transformers.
ANSI C57.12.26 Pad-Mounted Compartment- Type, Self-Cooled, Three
Phase Distribution Transformers for use with Separable Insulated High - Voltage Connectors, High Voltage, 34500 Grd Y / 19920 Volts and Below, 2500 kVA and Smaller.
ANSI C57.12.28 Pad Mounted Equipment-Enclosure Integrity
ANSI C57.92 Guide for Loading Mineral-Oil-lmmersed Overhead and
Pad-Mounted Transformers Rated 500 kVA and Less with 65 9 C or 55 9 C Average Winding Rise.
ASTM D 877 Standard test method for dielectric breakdown voltage of
Insulating Liquids using Disk Electrodes
ASTM D 4059 Standard test method for analysis of Polychlorinated
Biphenyls in Insulating Liquids by Gas Chromatography.
IEEE C37.71 Standard for Three-Phase Manually Operated Subsurface
and Vault Load-lnterrupting Switches for Alternating- Current Systems
IEEE C57.12.34 Standard Requirements for Pad-Mounted,
Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers (2500 kVA and Smaller) - High Voltage: 34500GrdY/19920 Volts and Below; Low- Voltage: 480 Volt 2500 kVA and Smaller. (issued in March 2005 - combines C57.12.22 and C57.12.26)
IEEE C57.12.90 Standard Test Code for Liquid-lmmersed Distribution,
Power, and Regulating Transformers and IEEE Guide for Short-Circuit Testing of Distribution and Power Transformers.
IEEE C57.91 Guide for Loading Mineral-Oil-lmmersed Transformers.
SIS 05.5900 Pictorial Surface Preparation Standard for Painting Steel