Professional Documents
Culture Documents
Civil Set of Requirments
Civil Set of Requirments
(if applicable) Upper Floor Plans (Retail) Upper Floor Plans (Office) Terrace Floor Plan Sections Elevations Staircase Toilet
FHC shaft with access double door in the Fire Lift Fire Escape Staircase Head room
Boundary wall/ Site line Ramps with drains at the bottom end (proper annotation) FHC shaft with access double door in the Fire Lift Lobby Material hatch grid lines with bubbles grid lines with bubbles grid lines with bubbles
Lobby with Fire door
Fire escape staircase; Fire door connecting Fire lobby and Fire Fire escape staircase; Fire door connecting Fire Lift Machine room(s) - With steps material texture and
Entry and Exit Gates/ Points Parking (dimensions and driveway indications thick ground line All levels marked
escape staircase lobby and Fire escape staircase to reach the Lift machine room hatch all fixtures
Parapet details + Shaft Dog boundary wall with
Ramps with proper annotation Pump room with fire doors Detailed Retail Spaces Detailed Office Spaces with Partitions and Doors thick ground line approach till next space All levels marked
Houses setback line
Valley and Ridge Lines, Slope material texture and
kurbs Sumps (maybe in dotted if it is below) with top access manholes Store Space (if aplpicable) Toilets as per NBC calculation beams All levels marked
directions, Levels hatch
PHE shaft with access panel (600mm wide access Rain Water Downtake Pipes with columns & drop pannel (if
Greens/lanscape - what happens in the 2m space between site line and construction? STP and inspection room Retail Maintenance Office (if Applicable) Windows/openings
Min.) Khurras applicable)
Electrical Shaft with access panel - If a person has
to go in the shaft to maintain the shaft should be at
Rain water IC Manholes PHE shaft Slab cutout above Retail Lifts & Staircase inside the retail space least 600mm wide, if direct access to cables is Chiller Pedestal (if applicable) grid lines with bubbles
provided without the need t go in the shaft then only
300mm wide X 1000mm long shaft/cutout required
Electrical Shaft with access panel (if outside elecrical room)/ Electrical Slab cutout (if
inside the electrical room) - If a person has to go in the shaft to maintain the shaft
Wall Type hatch legend
should be at least 600mm wide, if direct access to cables is provided without the need t
go in the shaft then only 300mm wide X 1000mm long shaft/cutout required