Professional Documents
Culture Documents
DC 3.500 27 1.500id nc-26 Spiral
DC 3.500 27 1.500id nc-26 Spiral
New Iberia, LA
Ph. (337) 365-8154
Connection Type: NC-26 (2-3/8"IF)
Victoria, TX
Ph. (361) 579-0244
Connection OD: 3.500 Inches
Odessa, TX
Connection ID: 1.500 Inches
Ph. (432) 366-1491
Maximum MUT 5,100 ft-lbs
Evanston, WY
Ph. (307) 789-5860
Minimum MUT: 4,600 ft-lbs
Texarkana, TX
Connection Torsional: 8,100 ft-lbs
Ph. (903) 838-1620
Connection Tensile (at Max MUT): 260,300 lbs
Williston, ND
Ph. (701) 774-2280
BSR: 2.416
Morgantown, WV
Drift: 1.375 Inches
Ph. (304) 212-5191
Surface Finish: Spiral
Enid, OK
Ph. (580) 237-1039
Slip Recess OD: NONE Inches
Weight: 27.00 lbs/ft
Displacement Estimated: 0.0098 bbls/ft
Sales Offices
Capacity Estimated: 0.0022 bbls/ft
Houston, TX
Ph. (281) 445-1777
New Orleans. LA
Ph. (504) 871-0182
Denver, CO
Ph. (303) 534-1873
Dallas, TX
Ph. (972) 774-4480
San Antonio, TX
Ph. (210) 822-4800
Pittsburgh, PA
Ph. (724) 916-4643
The technical information herein is for reference only & should not be construed as a recommendation. The user should consider all field conditions along with other
combined factors which may affect the final string design used in the field. Combined loads, slip crushing, elevator hoisting capacity, ID Coatings, and Hardbands
are not considered in these figures. Capacity/Displacement and adjusted weight figures are based on pipe purchased at above standard RBW and with longer than
standard tool joints. All dimensions are nominal. Figures are subject to change without notice.
Please refer to our website for updates: www.quailtools.com