Pay attention to safety demonstrations Ask Questions Donʼt Ask Students Use the right tool for the job Proper ventilation systems keep you healthy Guards are placed on tools and machines for your safety . do not alter or remove them! Keep floors free from backpacks and debris Observe “safety-zones” around machines. Only the operator and instructor are allowed in these zones. Never sit on a power machine Compressed air can be dangerous! Never point it at your eyes or ears/ Safety Glasses must be worn whenever you or another student is using a tool/machine No horsing around or goofing off Unplug tools before making adjustments Make sure the power switch is off, before plugging it back in. Have your instructor double check your set up Unplug the tools by unpluging the tool and not the cord. Report damaged tools to the instructor at once! This will prevent further surgries.