Professional Documents
Culture Documents
Vce Series: Plastic Ceiling Mounted Extractors
Vce Series: Plastic Ceiling Mounted Extractors
Technical Parameters
Electric Air Sound
Speed Power
Model Supply Volume Level
[rpm] [W]
[V~/Hz] [m³/h] [dB]
Installation
According to the size of the figure below, make a wooden frame
then fix it on the ceiling. Put the fan housing into the wooden
frame and fix it firmly with 4 screws as provided. Hold two springs
which on the louver and push them inside two holes in the fan
housing then loose it. Cover the louver slightly.
Do not install the fan in place which temperature is over 40°C.
Do not install the fan where it would be exposed to direct water
splash.
When install the fan in the ceiling, the distance should be above
15cm from ceiling to roof.
Description This fan should be installed above 2.3m from the floor.
The VCE 200A, 250A, 300A When connect with the charging line, all polarity switch that
series, faceplates are made of contact gap is 3mm at least must be installed in the charging line.
imported precision molds and
excellent injection processes.
Model L
Best materials for motor insulation
15cm above
L
are used along with the VCE-200A 258
Sophisticate baking finish process. Wooden
VCE-250A 316
The optimized six-blades design Frame
makes the air volume larger and VCE-300A 391
the fanning stronger, the unique
balance check for low vibration
and the high precision balance
control ensure the most effective
control of the vibration and noise.
Motors are equipped with
automatic protection for
overheating.
The VCE series are suitable for
larger domestic application such
as the ventilation of toilet,
bathroom, dining room, living
room, bed room and many other.
DOMESTIC WALL MOUNTED FANS
Plastic Ceiling Mounted Extractors — VCE Series
Dimensions [mm]
A
ØB
4×ØH
E
C D
F
Model A ØB C D E F G ØH