Professional Documents
Culture Documents
NeoBiotech Solution KIT Catalog - Ver.1
NeoBiotech Solution KIT Catalog - Ver.1
Neobiotech
SINUSLIFT/REPAIR /GBR
SinusAll Kit / SCA Kit / SLA Kit
FR Kit / SR Kit / GBR Kit / EZ GBR Kit
GBR Component
Cti-mem / Ti-Mesh / ACM
R GBR
Sinus Lift
SinusAll Kit
SCA Kit · SLA Kit
FR Kit · SR Kit
Repair GBR Kit · EZ GBR Kit · GBR Component
Cti-mem
Contents
GBR Solution Ti-Mesh
ACM
SCA Kit 9
SLA Kit 12
SR Kit 19
EZ-GBR Kit 27
GBR Component 32
CTi-mem 34
Ti-Mesh 39
ACM 40
4 Sinus Lift Solution Sinus Lift Solution 5
Sinus Solution
SinusAll Kit SinusAll Kit (Crestal Approach Tool Components)
The SinusAll Kit combines NeoBiotech’s SCA (Sinus Crestal Approach) Kit, SLA (Sinus Lateral Approach) Kit, and the Surgical
Kit into a single kit. The product allows maxillary sinus implant procedures to take place using a single kit, rather than having
to prepare a sinus kit and a surgical kit separately.
• S-Reamer
Ø3.2 SASR32
Ø3.6 SASR36
Hex Driver
Drill Handle
Ø3.9 SASR39
Misaligned case Septum
Ø2.8 Ø3.2 Ø3.6 Ø3.9
Surgical Drill * 1,200rpm
Depth gauge
S-Reamer
Rotary Elevator
• Rotary elevator
Lateral Stopper Aqua Tap
Side Cutter
Ø2.8 SARE28
Ø3.2 SARE32
Ø3.6 SARE36
Bone Carrier
Ø3.9 SARE39
Bone condenser Ø2.8 Ø3.2 Ø3.6 Ø3.9
* 80rpm
Sinus Elevator
• Stopper
Aqua System
Length 1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm
Length
Product Name CDS010 CDS020 CDS030 CDS040 CDS050 CDS060 CDS070 CDS080 CDS090 CDS100 CDS110 CDS120
0.2mm
Ø2.6
Product Name
12.0
11.0
10.0 1 2 3 4 5 6 7 8 9 10 11 12 SADG01
9.0
8.0
7.0 Diameter(Ø) Ø2.2 Ø2.8 Ø3.2 Ø3.7 Ø4.0 Ø3.1
6.0
5.0
4.0 Product Name SAD22 SAD28 SAD32 SAD37 SAD40
3.0
2.0
1.0 * 1,200rpm
0.2
6 Sinus Lift Solution Sinus Lift Solution 7
Sinus Solution
SinusAll Kit (Crestal Approach Tool Components) SinusAll Kit (Lateral Approach Tool Components)
Product Name
Product Name
AQT
SALS640
* 2,000rpm(20:1) / 5,000rpm(1:1)
Ø6.5
• Aqua system (Aqua Valve, Hose, Syringe (Set)) • C-Guide Reamer & C-Reamer
Syringe
Product Name
Product Name Product Name
Hose AQST
Auqa Value SACG610 SAC640
* 2,000rpm(20:1)
5,000rpm(1:1)
Ø6.5 Ø6.5
Product Name
Product Name
JUMB02
SLE01
Product Name
Ø1.5
Product Name
<Window extend>
Product Name
Product Name Length 1mm 2mm 3mm 4mm
A B A : Stopper
SADH01 Length
SCT30 Product Name LTS010 LTS020 LTS030 LTS040 B : Length
* 1,200rpm C : 1.5mm
A : 0.7mm
Ø3.0
8 Sinus Lift Solution Sinus Lift Solution 9
Sinus Solution
SinusAll Kit (Implant Placement Tool Components) SCA Kit (Sinus Crestal Approach Kit)
SCA Kit is a drilling tool on the inferior cortical bone without tearing of membrane and make a perforation on the inferior
cortical bone without malleting osteotome technique Therefore User can get CMI Fixation. (Initial Fixation in Crest cortical
bone, Middle cancellous bone and Inferior cortical bone)
Short Long
• Hex driver
Product Name
Depth Gauge
HD1215S
15mm
Hex 1.2
• Torque wrench
• Initial Drill
Product Name
TW60
Diameter(Ø) Product Name
Ø2.0 SSD20
* 1,200rpm
• S-Reamer
Ø2.4 ICR24
Ø2.8 ICR28
Ø3.2 ICR32
Ø3.6 ICR36
Ø2.4 Ø2.8 Ø3.2 Ø3.6
* 1,200rpm
10 Sinus Lift Solution Sinus Lift Solution 11
Sinus Solution
SCA Kit (Sinus Crestal Approach Kit) SCA Kit (Sinus Crestal Approach Kit)
Length 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm
Product Name SKS02 SKS03 SKS04 SKS05 SKS06 SKS07 SKS08 SKS09 SKS10 SKS11
1 2 3
Drilling Using S-reamer Check perforation
• Depth Gauge · Make drills 1mm shorter than measured · For safety, select a proper Sreamer in di- · Using Depth Gauge, check whether be-
height of residual bone. Drill only 1mm ameter and 1mm shorter than measured ing perforated. Then, hang on the end
more in each step by step using 1mm lon- height of remained bone. And make drills. of depth gauge in sinus wall inside. And
ger stopper before the final drilling. check whether the tip side of gauge is
· If the sinus inferior cortical wall doesn’t
hung on the interior wall.
Product Name perforate until the stopper reaches to the
12mm crestal bone, change 1mm longer size
SDG00
9mm stopper and drilling continuously.
6mm
3mm
· You can feel perforating in inferior cortical wall.
• Bone carrier
Product Name
4 5 6
JUMB02 Bone carrier Bone condenser Bone inserter
· Carry the bone grafting materials into os- · Push and keep the graft materials in place · Push the bone into sinus after inserting the
teotome site. on the floor of the sinus through the os- bone into a hole with bone carrier.
teotome site.
· One time insertion capacity 0.05cc. · Can be safely used with 1mm long stop-
per. 80rpm speed.
· To make 1mm graft height, 0.1cc is needed.
• Bone Condenser
Product Name
SBC01
7 8
Bone spreader Final Drilling & Implantation
· Spreading the bone and reduce pressure · Do a Final Drilling
• Bone Inserter • Bone Spreader
in sinus area. 80rpm speed.
· Based on the density of Crestal cortical
· Use bone spreader at least after inserting bone, the Countersink should be done
the bone more than 2 times. (Except IT Type of Fixture). Generally, it
Diameter(Ø) Product Name should be done for D1-D2 bone. But, in
Product Name Dia. Ø2.7 SBS20
case of below of D3 bone, it is Okay to skip
according to the decision of dentist.
SBI27 Ø3.1 SBS30
· After finishing a whole of drilling, do a im-
* 80rpm * 80rpm plantation.
12 Sinus Lift Solution Sinus Lift Solution 13
Sinus Solution
SLA Kit (Sinus Lateral Approach Kit) SLA Kit (Sinus Lateral Approach Kit)
Lateral window technique is the formation of the access to the maxillary sinus through its lateral wall. The process using this
tool is simpler and much comfortable than any other techniques. Above all, this surgical kit provides ultimate solutions for
the cases of only having with a thin residual bone height which is diffi cult to approach with a crestal technique, membrane
rupture by a sinus crestal approach or placing a multiple implants. In addition, SLA reamers can be easily adapted for the
• C-Reamer & C-Guide Reamer
case of formation of minimum fl ap size on the inferior wall.
Elevator
C-Guide Reamer C-Reamer
Length 1.0mm 1.0mm 1.0mm 2.0mm 2.0mm 2.0mm 3.5mm 3.5mm 3.5mm
Diameter(Ø) Ø5.5 Ø6.5 Ø7.5 Ø5.5 Ø6.5 Ø7.5 Ø5.5 Ø6.5 Ø7.5
Product Name SCG510 SCG610 SCG710 LC520 LC620 LC720 LC535 LC635 LC735
• LS-reamer
Product Name
SLE05
<Elevator 1>
Product Name
Product Name
SLE03
<Elevator 3>
14 Sinus Lift Solution Sinus Lift Solution 15
Sinus Solution
SLA Kit (Sinus Lateral Approach Kit)
1 2 3
Flap LS-Reamer Bone Disk
· Open the soft tissue. · FMake a lateral hole with the LSreamer. · The LS reamer will leave a thin bone disk.
· Keep the drill upright and maintain a steady
drilling motion; Both sides of the LS-reamer
blade should be in contact with the bone
while drilling.
· Continue drilling.
· Speed : 2,000rpm
· NOTE : C-Reamer can be used instead of
the LS-Reamer if you wish to save a circular
bone core disk from the lateral wall.
4 5 6
Detach sinus membrane Elevate sinus membrane Bone graft
· #1 elevator is used to initiate detachment · #2 elevator is used for detaching the mem- · Place bone graft material.
of the membrane in the mesial-distal area. brane in the inferior area.
· Cover the lateral hole with a collagen mem-
· #3 elevator is used for the anterior and pos- brane.
terior areas.
· Suture the soft tissue.
16 Repair Solution Repair Solution 17
Fixture Remover FR Screw Hex Driver Torque Control Device Length Product Name
Repair Solution
7mm HDF1607 FR Screw Hex Driver(17mm)
12mm HDF1612
Fixture Remover
17mm HDF1617
7mm 12mm 17mm
• Fixture Remover
15mm FR315
Narrow Clamping Clamping
20mm FR320 Force Force
15mm FR415
Regular
20mm FR420
15mm FR515
Wide (Ø5)
Fixture Remover Screw 20mm FR520
• Product Code : FRKIT 15mm FR615
Wide (Ø6~8)
20mm FR620
M1.8 FRS18
1-72UNF FRS172
Slider
M2.0 FRS20
M2.5 FRS25
Repair Solution
External Guide
Internal Guide
Conical Guide
1 2
Failed implant Fixture Remover Screw
· Completely remove the prosthesis of the implant that needs to be · Select an appropriate size of Fixture Remover Screw
removed.
· Connect the Fixture Remover Screw to the FR Screw Hex Driver and
tighten it clockwise.
• Drill
M1.6 CD16
Fixture Remover Clear
· Select an appropriate size of Fixture Remover M1.8 CD18
· Connect the selected Fixture Remover and tighten it counterclock- M2.0 CD20
wise until it is completely tightened to the Fixture Remover Screw Claw
M2.5 CD25
that is fixed in the implant.
* 80rpm
· Using a Torque Wrench, further apply torque to the Fixture Remover
(counterclockwise) until the implant is finally unscrewed from the site.
• Reverse Drill
Repair Solution
Screw size
Applicable Products Standard Product Name
M1.8 Ø1.0 SR10
<Internal Guide>
Applicable fixture Standard Product Name
Having 2.4Hex Internal
2.4Hex IHG24
Connection Fixture
M2.0 Having 2.5Hex Interna
2.5Hex IHG25
Connection Fixture
Having 3.1Octa Internal
3.1Octa IOG31
• Shank Driver Connection Fixture
<External Guide>
Applicable Shank Driver
Standard Product Name Applicable fixture Standard Product Name
Products
<Perfect Guide>
Applicable fixture Standard Product Name
Applicable Fractured Product
Diameter(Ø)
Revers Drill Screw size Name
Conical Guide : CG00 SR Driver Holder
RCD10 M1.8 Ø1.0 PG1018 (3.5Double Hex)
Internal Guide : IHG24, IHG25, IOG31 2.4Hex GH00
RCD10 M1.8, M2.0 Ø1.2 PG1220
RCD12 External Guide : EHG24, EHG27,
EHG34 Guide
RCD12 M2.0, M2.5 Ø1.4 PG1425
RCD14
PG Hand Driver
Repair Solution
1 2
Fractured screw Perfect Guide
· Select an appropriate size of Perfect Guide
· By using the PG Hand Driver, tighten the Perfect Guide to the Fix-
ture in a clockwise direction until it touches the screw inside the
fixture.
3 4
Reverse Drill Screw Remover
· Select an appropriate size of Reverse Drill and connect it to the con- · Remove the Perfect guide connected to the Fixture
tra angle of the surgical engine.
· Select a Screw Remover that fits to the hole created by the Reverse
· Insert the Reverse Drill into the Perfect Guide attached on the fixture. Drill.
· By drilling counterclockwise at a speed of approximately 2000rpm, · Connect the Screw Remover to the contra angle of surgical engine
drill 1~2mm into the surface of the fractured screw. and drill slowly (less than 80rpm) while pressing down with enough
force to remove the fractured screw.
· Check the marking line (in 1mm intervals) of the Drill body while
drilling with adequate irrigation.
24 GBR Solution GBR Solution 25
5mm PHSD05
10mm PHSD10
Fixing Screw
Fixing Screw
Cover Screw
10mm DHDC10
Contra Angle
GBR Solution
20mm DHDC20
Dual Hex Driver
(Handle)
Ratchet 15mm DHDR15S Hex1.6
(Tent Screw, CTi-Spacer)
Hex1.0
(CTi-Cover Screw)
Tent CTi-Cover
Contra Angle Ratchet Screw Screw
Rachet Connector Stopper Dual Hex Driver Tent Screw IS CTi Spacer
(Contra Angle)
• Driver Handle
• Product Code : GBRKIT
Product Name
DRH
• Screw Fixation Drill
Ø1.3 SFD13
15mm GRC15
Dual Philips Head
Hex Driver Screw Driver
5mm SFDS050
GBR Ratchet
Connector
2 3
Phillips Head EZ-Phillips Head
Tent Screw CTi-mem & Fixing Screw Screw Driver Driver
· Insert Tent Screw while leaving space for · Place the Fixing Screws in the Fixing Holes
augmentation. (20~25Ncm) EZ-Ti-Mem Push
Driver
EZ-Screw Fixation
· Insert at least 3mm deep or more and obtain · Using a sharp instrument, create a hole on Drill Stopper
15~25Ncm initial stability. Tent Screw may the CTi-mem where the Tent Screw is lo- EZ-Cover Cap
Driver
be fractured when torque is over 30Ncm. cated to allow the Cover Screw to be con-
1 nected afterwards.
GBR Solution
Drilling
· Connect a stopper to the drill
· Drill at least 3mm deep depending on the
bone density.
4 5
Bone Graft Cover Screw
· Before bone graft, connect the Cover Screw · Remove the cover screw.
onto the Tent Screw to prevent bone mate-
· Fixate CTi-mem to the Tent Screw by re-
rials from entering inside.
connecting the Cover Screw above the • Screw Fixation Drill Stopper
· At this time, check if the location of the hole CTi-mem. (10~15Ncm)
on the CTi-mem matches with the Cover
· Fixate the remaining parts of the CTi-mem
Screw.
so that grafted bones can be stably fixed.
Length(L) Product Name
· Cover the CTi-mem with soft tissue
5mm EZSFDS050
28 GBR Solution GBR Solution 29
20mm DHDC20
15mm GRC15
• EZ-Philips Head Driver
GBR Solution
Length(L) Product Name
2mm EZPHD3502
• Driver Handle
12mm EZPHD3512 EZ- Philips
Head Driver
20mm EZPHD3520
Product Name
EZ-Fixing Screw
DRH
20mm PHSD20
Remove
• EZ-Break Driver by rotating
clockwise
• EZ-Cover Cap Driver
Break
Diameter(Ø) Product Name
Ø4.2 EZCCD42
30 GBR Solution GBR Solution 31
EZ-GBR Kit
3
EZ-TI-Mem Push Driver
· Fixate membrane by pressing down the
EZ-Ti-Mem Push Driver to the conical part
of the EZ-Fixing Screw.
1 2
GBR Solution
EZ-Fixing Screw Bone Graft & Cti-mem
· To secure enough space for bone forma- · Fill bone materials up to the height of the
tion, place EZ-Fixing Screw on the bone EZ-Fixing screw, and position an appropri-
defect area. ate type of CTi-mem.
4 5 6
EZ-Cover Cap Driver EZ-Break Driver Fixing Screw
· Additionally fixate membrane by plac- · Use EZ-Break Driver to remove the conical · If necessary, make an additional fixation by
ing the EZ-Cover Cap onto the EZ-Fixing part of the EZ-Fixing Screw by rotating it in using fixing screws.
Screw using the EZ-Cover Cap Driver. a clockwise direction.
· After adapting Cti-mem to surrounding
part of tissue, cover the Cti-mem with soft
tissue.
32 GBR Solution GBR Solution 33
• Fixing Screw • Universal Spacer - Dual Hex Driver (DHDC10 / DHDC20) is required to use Universal Spacer.
- Cover Screw – 1.0 hex / Universal Spacer – 1.6 hex
Diameter(Ø)
Length(L) Product Name Screw Size Length Product Name Compatibility
(Screw Size)
• Tent Screw
7mm CTS2007
GBR Solution
10mm CTS2010
13mm CTS2013
15mm CTS2015
• EZ-Fixing Screw
3mm EZFS1703C
5mm EZFS1705C
7mm EZFS1707C
10mm EZFS1710C
13mm EZFS1713C
15mm EZFS1715C
* Disposable
EZ-Fixing Spacer
1.5mm ISEZFS3415S
2.0mm ISEZFS3420S
* Disposable
Ø3.43
34 GBR Solution GBR Solution 35
CTi-mem CTi-mem
New Concept of Titanium Membrane, Customized Ti Membrane
• RA Type
4 10 8 RA2 RATMB0912F
4 10 11 RA3 RATMB0915F
GBR Solution
RB Type EZB Type
RE Type RT Type
• EZA Type
R Type CTi-mem
• Tent Screw Type
P
4 10 8 EZA2 EZTM0912A2
Thickness : 0.12mm
EZ Type CTi-mem W
• EZ-Fixing Screw Type
Ø1.25
Ø0.7
Ø0.4
Thickness : 0.12mm
36 GBR Solution GBR Solution 37
CTi-mem CTi-mem
• RB Type • RC Type
P P
10 RC6 RPTML1215SF
5 RC7 RPTML1210LF
W
W
12 12 7 RC8 RPTML1212LF
10 RC9 RPTML1215LF
GBR Solution
• EZB Type • EZC Type
P P
10 EZC6 EZTM1215C6
5 EZC7 EZTM1210C7
W
W
12 12 7 EZC8 EZTM1212C8
10 EZC9 EZTM1215C9
CTi-mem Ti-Mesh
P(mm) L(mm)
TYPE Product Name Size(mm) TYPE Product Name
(Proximal Width) (Length )
12 15 RE1 RCTM1215 20 x 12 T1 TMN 122008
20mm
12mm
20mm 25mm
GBR Solution
35 mm
25 mm
• RT Type
35mm 50mm
V(mm) H(mm)
TYPE Product Name
(Vertical) (Horizontal)
12 20 RT1 RTMN1220125
L
20 25 RT2 RTMN2025125
25 35 RT3 RTMN2535125
35 50 RT4 RTMN3550125
Ø4.0 NACM40ISETS
Ø4.5 NACM45ISETS
Ø6.0 NACM60ISETS
Diameter
Sinus Lift
• Auto Chip Maker Technique Guide SinusAll Kit
SCA Kit · SLA Kit
FR Kit · SR Kit
Repair GBR Kit · EZ GBR Kit · GBR Component
Cti-mem
1 3
Stopper Drilling
· Connect the stopper to the sterilized ACM drill. · To prevent slipping of the ACM drill, slightly tilt the drill left and right
until the drill stably positions itself. (80rpm / Non-irrigation recom-
mended)
· In order to collect high quality autograft bone, drill only 3~4mm
deep from one site, and move on to a different site to continue
drilling.
2 4
Locate the ACM
· Select the most suitable place to collect autograft bone.
· Position the ACM Drill where the autograft bone will be collected.
SINUSLIFT REPAIR GBR
Neobiotech Sinuslift / Repair / GBR
SinusAll Kit / SCA Kit / SLA Kit / FR Kit / SR Kit / GBR Kit / EZ GBR Kit / GBR Component / Cti-mem / Ti-Mesh / ACM
SINUS
Neobiotech Co., Ltd. E-space #1001, 36, Digital-ro 27-gil, Guro-gu, Seoul, Republic of Korea
Tel. +82-2-582-2885 Fax. +82-2-582-2883