Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

N12a

Features:
Two-way active speaker with one 12" woofer and
one 1.75" driver.
Cabinet is made from polypropylene and special high-tech
material. It's durable, anti-shock and has good damping
characters.
Voice coil in the 12" woofer is made from 75mm copper
cladding aluminium ribbon wire.
Heavy duty protective grille.
Rotatable 50-100 0x55 0 (HxV) dispersion horn makes it
suitable for any performance purposes.
Molded-in pole mount, easily suspended.
Vertical or horizontal layout, can be used as a monitor or in
any flying systems.
Arrayable vertically in 4 layers or horizontally in more than
8 columns.

Model:N12a
Technical Parameters
System: Built-in crossover two way full range active speaker
Driver Quantity: 12"x1(Bass) 1 x 44mm Driver

Frequency Response(-3dB): 50Hz-18KHz


Frequency Response(-10dB): 40Hz-20KHz
Max Sound Level(dB/1M): 118dB
Level Adjust range: ±10dB(100Hz)-Bass ±10dB(10KHz)-Treb

Output power: 300W(Bass)+100W(Treb)


Distortion: Line-0.02%, Microphone-0.04%
Rotatable horn(HxV): 50-100 0x55 0

Load impedance: Treb - 8Ohm, Bass - 8 Ohm


Input impedance: Line - 20KOhm, Microphone - 10KOhm
Connectors: XLR K3P
Power supply: AC 110/220V, 50/60Hz

Dimensions(WxDxH mm/pcs): 415X391 X600 mm


Packing Dimensions(WxDxH mm/pcs) 465X435X680mm
Net Weight(Kg/pcs): 23Kg
Gross Weight(Kg/pcs): 25.2Kg
N12a
N12a
POWER: 300W+100W
ACTIVE 2 WAY FULL RANGE
ELECTRONIC COMPENSATION SPEAKER

VOLUME BASS TREBLE 8

2 CLIP
9
3 LINE MIC INPUT OUTPUT

4 2 1 2 1

5 3 3
10
LINE
MIC

11

This series of products are authorized to be produced by


3g Audio Technology Co., Ltd. with Germany computer aided
design software and testing system according to IEC
standard.

No:
DONGGUAN 3G AUDIO TECHNOLOGY CO., LTD.

FUSE: T5AL 250V

ON

12
USE ONLY WITH A 250V FUSE

110V

6 220V

7 110-220V 50-60Hz 13
OFF

1. Volume control. 9. Treble control.


2. Clip indicator. 10. Line/microphone output.
3. Microphone input signal presence 11. Line/microphone input.
indicator. 12. Power supply input. Make sure that the
4. Line input signal presence indicator. voltage selector is set for your country's
5. Line/microphone selector. correct voltage.
6. 110V/220V voltage input selector. 13. Protection fuse. Use only fuses of the
7. Power ON/OFF switch. correct amp rating.
8. Bass control.

You might also like