Professional Documents
Culture Documents
170W AB Class Bridge Mode Amplifier Using TDA7294 IC + PCB - Electronic Circuits
170W AB Class Bridge Mode Amplifier Using TDA7294 IC + PCB - Electronic Circuits
Home
/
Amplifier
/
Circuits to Assemble
/
IC Amplifier
/
170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB
report this
TOTA L V IE WS
1 8 7 8 2 3
F OL L OWE RS
Followers (40)
Next
Follow
TA GS
AMPLIFIER
ARDUINO
Breeze Laundry Liquid Detergent
Frontload 2.6L Bottle 2x
ARDUINO MINI COURSE
CIRCUITS TO ASSEMBLE
SHOP NOW ▸
EBOOKS
Para Versão em Português, Clique Aqui!
ELECTRONIC CIRCUITS
ELECTRONIC COMPONENTS
This is a Class AB Audio Power Amplifier, it uses two TDA7294 Integrated Circuits, in Bridge Mode to drive one or
more power speakers. EQUALIZER AND PREAMPS
The circuit provides a total output power of 170W, and this with good sound quality, powered from a symmetrical IC AMPLIFIER
power supply.
IOT
The Amplifier responds very well to all audible frequency ranges, and has a minimalist, compact design, which makes
this amplifier a good choice for an unprecedented range of application. LEARNING
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 1/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
The TDA7294 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio class AB POWER SUPPLY
amplifier in Hi-Fi field applications (Home Stereo, self powered loudspeakers, guitar amplifier, Top-class TV).
SWITCHED-MODE PS
Thanks to the wide voltage range and to the high out current capability it is able to supply the highest power into both
TRANSISTOR AMPLIFIER
4Ω and 8Ω loads even in presence of poor supply regulation, with high Supply Voltage Rejection.
The built in muting function with turn on delay simplifies the remote operation avoiding switching on-off noises.
MOS T V IE WE D
You might also be interested in:
440W Class AB Power Amplifier u
Mosfet IRFP9240 and IRFP240
24W Stereo Hi-Fi Audio Amplifier using TDA2616 + PCB
Transistors with PCB
68W Hi-Fi Audio Power Amplifier using LM3886T IC + PCB
Adjustable Power Supply 1.2 to 37
High Current 20A using LM317 an
TIP35C + PCB
Features
Operating Voltage Range (± 10V to ±40V)
DMOS Output Stage
High Output Power (Up to 100W musical) report this
RF Amplifiers
Miniature Size
Satellite RF Testing Equipment for
microwave applications in communications
in Radar
atlanticmicrowave.com
OPEN
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 2/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
Bridge Application
Our amplifier is configured in Bridge mode, where two TDA7294s ICs are used. With this type of configuration we get a
pretty significant 170W of power, however there are two different configurations:
For 8Ω Speaker - Vs = ± 25V, the maximum output power is 150 W.
For 16Ω Speaker - Vs = ± 35V, the maximum power is 170 W.
We know that the TDA7294, supports 4Ω or 8Ω speakers in mono version, however, for this application in Bridged
configuration, the speaker impedance shouldn't be less than 8Ω for reasons of dissipation and current carrying
capacity of the Integrated Circuits.
Fig. 2 - Schematic 170W Amplifier Circuit in Bridge with Integrated Circuit TDA7294
Components List
Semiconductors
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 3/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
Resistors
R1, R5, R6, R8, R10 ... 22K Resistor (red, red, orange, gold)
R2 ................................ 20K resistor (red, black, orange, gold)
R3 ................................ 10K resistor (brown, black, orange, gold)
R4 ................................ 30K resistor (orange, black, orange, gold)
R7, R9 ......................... 680Ω resistor (blue, gray, black, gold)
Capacitors
C1, C4 ......................... 1μF Ceramic/Polyester Capacitor
C2, C3, C5, C6 ............ 22μF Electrolytic Capacitor
Others
P1, P2 ......................... Screw Terminal Type 5mm 2-Pin Connector
P3 ................................ Screw Terminal Type 5mm 3-Pin Connector
J1 .................................Set of male connectors 3-Pin (Optional)
Other ........................... PCB, Wires, Speaker, etc.
Power Supply
The power supply will depend on which output power you will choose, which will also depend on how many Ohms your
speaker will have. We have two versions:
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 4/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
Version 1 - 150W output.
Speaker must be 8Ω and the maximum voltage is for ±25V
Remember that for both versions a Symmetrical power supply is used, i.e. [ +VCC | GND | -VCC ]. With a current of at
least 6 Amperes.
If you have any questions, suggestions or corrections, please leave them in the comments and we will answer them
soon.
Subscribe to our blog!!! Click Here - elcircuits.com!!!
My Best Regards!!!
Tags
# Amplifier
# Circuits to Assemble
14.4V, 70W High Efficiency Power Amplifier Using HI-FI 120W RMS Amplifier Circuit Using LM4780 IC + PCB
TDA1562Q IC + PCB
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 5/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
2 C OMME NTS :
Hola, esta muy bueno, pero necesito el mismo mono bridge pero de alimentacion simple negativo y positivo
Reply
Replies
Abrazos!
Reply
report this ad
Name
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 6/7
11/2/22, 11:08 AM 170W AB Class Bridge Mode Amplifier using TDA7294 IC + PCB - Electronic Circuits
Email
*
Message
*
Send
Copyright © 2022 Electronic Circuits. All rights reserved ELC | Administered by: Electronic Circuits
https://www.elcircuits.com/2022/01/170w-ab-class-bridge-mode-amplifier.html 7/7