Professional Documents
Culture Documents
Eme Microproject
Eme Microproject
On
Presented by
03-SanketTanaji Deshmukh
04-Vedant Sandip Dhanawade
20-Atharv Govind Salunkhe
Guide By
Prof. N.B. Devi sir
( Mechanical Engineering Department)
[2022- 2023]
1
RayatShikshan Sanstha’s
CERTIFICATE
OfSecond Year ( Semester III )have successfully completed the Micro-Project work entitled
“To Study Micrometer ” in the Course Metrology of Program Diploma in Mechanical
Engineering of Maharashtra State of Technical Education, Mumbai, Maharashtra State.
Date: / /
Place:K.B.P Polytechnic satara
2
Undertaking By Students
We will preserve micro-project and the report in our custody till end of completion of our
program. We assure that we will produce the same whenever we or anybody from our
group will be asked to produce it without fail.
3
Title of Micro project – To Study Micrometer
1.0Brief Introduction
3.0Action plan
4.0Resources Requires
Sr. Name of resource /
Specification Quantity Remarks
No. material
1 Laptop Windows 7 1
2 Internet Airtel 3
3 Reference Book Metrology 1
INTRODUCTION
HISTORY
PARTS OF MICROMETER
PRINCIPLE OF MICROMETER
HOW TO USE AND READ THE MICROMETER
APPLICATION OF MICROMETER
INTRODUCTION:
A Micrometer is a precision measuring instruments used to obtained very fine
measurements and Available in metric and imperial versions.
Metric micrometers typically measure in 0.01mm increments and imperial versions in
0.001 inches.
The measurements they provides can be more accurate those givn byothr measuring
devices such as dial callipers, but depends very much on the users care.
They are widely used in mechanical engineering for précising measuring components
Values are taken from each of these scales and combined to make the total
measurements.
These are the smallest values that can be represents on the primary sleeve scale.
Although micrometers are highly accurate measuring devices ,ther are limited in their
range.
Micrometers typically have a measuring ranges of 25mm and 1 inch.for instance ,metric
versions measure 0-25mm, 25-50mm,50-75mm etc, and imperial versions measures 0-1
inches,1-2 inches,2-3 inches etc.
HISTORY :
A word micrometer is aeoclassical coinage from greek micros
6
7
8
9
10
11
12
13
14
15