Professional Documents
Culture Documents
Synthetic Thermic Fluid
Synthetic Thermic Fluid
SK GROUP INTRODUCTION
Headquartered in Seoul, SK Group is the third largest conglomerate in South Korea. SK has a presence in
more than 50 countries today with over 60,000 employees' world over in 95 affiliate companies. SK
Group was ranked at 57th in the Global Fortune 500 List in the year 2015.
Modern industry requires enormous thermal energy for various purposes. To deliver this thermal energy, high
efficiency heat transfer fluids are necessary. Thermic Fluid cons tutes more than 99% Base Oil. With YUBASE, the
purest group III base oil in the world, our Thermic Fluid range exhibits enhanced features in comparison to most
major global players. SK's Thermic Fluid Range has outstanding oxida on stability, excellent thermal stability, very
high flash point and very good heat transfer efficiency.
Saturate contents of YUBASE and SK HBO are over 99.9% and this means that there are no contaminants in the base
oil and it has excellent thermal stability. This is because SK's base oils are produced in severe hydro-cracking process.
Compared with other lubricants that are made of API Group I/II, it offers longer drain interval through Outstanding
Thermal & Oxida ve Stability
SK Syn Therm HT
SK Super therm FG
Salient Features
15
10
0
Group I Group II YUBASE6 PAO 6
± Low Vaporiza on
SK Super Therm 200 & 300 prevents vapor lock in the circula on pump and cavita on, which is fatal to centrifugal
pump blades. In addi on, protec on is provided against vaporiza on losses and excessively high pressure during
normal opera on.
200
Test Method
KS M 2010
150
100
50
0
SK Super Industry Compe on Compe on
Therm 300 Standard A B
Flash Point C 236 190 193 220
Applica ons
± Heat transfer boilers at tex le mills. Paper mills and chemical plants
± Indirect, close heat transfer systems that operate between -10℃ and 316℃
± It is recommended to operate within 300℃ bulk temperature, beyond which the life of oil gets depleted
Typical Properties
SK Super Therm FG is a highly efficient, non-toxic food grade thermic fluid that is safe for incidental food contact in
food processing plants. Made from severely hydro-cracked base stocks, SK Super Therm FG has outstanding
thermal and oxida on stability allowing opera on at high temperatures for extended periods. It is non-hazardous,
non-toxic, water white and odorless. SK Super Therm FG is also fouling resistant. This heat transfer fluid provides
excellent heat transmission and efficiency at the relevant opera ng temperatures. This ensures high heat transfer
rates requiring limited pumping energy. It also has a low vapour pressure, greatly reducing evapora on and
cavita on, elimina ng the need for high pressure piping and equipment.
General Characteristics
± SK Super Therm FG is recommended for use in non-pressurized, indirectly heated, closed loop, liquid phase heat
transfer systems used in food processing opera ons at temperatures up to 300˚C.
± SK Super Therm FG contains food grade an -oxidant to resist oxida on. Our exclusive addi ve, including a
proprietary outstanding food-grade an oxidant, ensures long, trouble-free opera on.
± SK Super Therm FG provides longer drain interval than other mineral type thermic fluid. This is engineered to give
unsurpassed levels of protec on and service life.
Applications
A highly efficient, non-toxic, food grade heat transfer fluid that is safe for
incidental food contact in food processing plants and pharmaceu cal facili es
Applications P EN DEN
E
I ND
TL
NSF
ISO Viscosity Grade 22
TAN, mg KOH/ mg 0.01
Sp. Gravity, 15/4 °C 0.8378
Kin Vis,40C cSt 22.60
Pour Point, °C -15.0
Flash Point, ° C 236
*Typical Test Data are Average Value only
SK Syn Therm HT
SK Syn Therm HT is synthe c heat transfer oil, which is high purified Hydrogenated Terphenyl base and op mized to
industry requirements. Due to its thermal stability, SK Syn Therm HT can be used for high temperature applica on
above 320℃ for longer and stable opera on of system.
General Characteristics
Applications
Typical Properties
Test Item Test Method Typical Property
3
Density @ 20°C, gm/ cm ASTM D1298 1.002
Kin Vis,40°C cSt ASTM D 445 29.10
Flash Point, °C ASTM D 92 182
Pour Point, °C ASTM D97 -27
TAN, mgKOH/ g ASTM D 664 0.05
*Typical Test Data are Average Value only
SK Syn Therm LV
SK Syn Therm LV is a mixture of 73.5% diphenyl and 26.5% biphenyl oxides which are stable synthe cs at high
temperature. It is applicable as heat transfer medium up to 400℃ with liquid or vapor phase (boiling - condensing)
and compa ble with similar cons tutes.
Applications
SK Syn Therm LV is applicable to systems at bulk temperature of 12℃~400℃. It is suitable for facili es of synthe c
fiber, petro chemicals and solar energy operated over 350℃.
Opera on temperature: Liquid phase 12℃~400℃, Vapor phase 257℃~400℃
Typical Properties
Test Item Typical Property
3
Density @ 25°C, Kg/ cm 1062
Kin Vis,40°C cSt 2.60
Flash Point, °C 124
Freezing Point, °C 12
Heat of Fusion (kCal/ kg) 23
*Typical Test Data are Average Value only