Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

An oscilloscope is connected to a signal generator , which makes a sinus edtal wave on the oscilloscope .

The input end of the oscilloscope is also connected to a microphone , which picks up the noise generated
by the
loudspeaker connected to the signal generator .
A metre ruler ties between the loudspeaker and the

microphone which
,
measures the distance the Soundwave travels .

The speaker recteves the from the signal generator to produce soundwaves of certain frequency
signal a .

The signal generator produces a base wave on the oscilloscope as are frena

soundwave to
As the distance between the microphone and the speaker increases the time taken for the ,

reach the microphone also increases the Soundwave shifts to one side
,
No ,

rhos
rrros
Record at what distances between the
microphone and the loudspeaker are they phase and out of phase respectively
in ,

the distance it takes: for the two waves to be in phone ,


out of phase ,
then in phase again is the wavelength
, .

The difference in phase Chow much the microphone ware is


.
shifted by ) is the time taken for the sound crave to travel

from the speaker to the microphone .

to out of phase, the difference between them is half an oscillation,


When the two waves move from being in phase
the time taken for the
speaker 's soundwave to cover a certain distance causes a 1 phase difference
When the that certain distance again, the phase difference is 360, so the two waves are in
microphone moves
the wavelength
distance needed for the soundwave to travel oscillation
one Is
phase exactly
,
one oscillation apart . The .

You might also like