Professional Documents
Culture Documents
YOKE CATALOGUE New
YOKE CATALOGUE New
EECIFLUX Electromagnetic Yokes are a combination of low cost, light weight and articulated doubled joined
legs, thereby creating versatile portable magnetic particle equipments.
The articulated poles are adjustable from 50 mm to 280 mm making the equipment ideal for inspecting
components in various forms.
INSPECTION METHODS:
Dry Method: This does not require a black light. This is sensitive to
sub surface defects on the rough surfaced components like forgings,
castings, etc.
Wet Non-Fluorescent Method: This is liquid based method suitable for inspection of very fine surface or
sub surface defects.
Wet Fluorescent Method: In this method part / job is inspected under black light. Very sensitive to fine
EF-2Y used
surface on ASTM
cracks. test
Good block of cracks is obtained.
visibility
with white contrast paint and
A range of Inspection Powders & Accessories are available. We can assist you in selecting the one most
black color inspection
suitable for your application.
powder used in kerosene.
TECHNICAL DATA
Pole Distance : 25 to 250 mm
Lifting Capacity at 100mm pole spacing : Above 18 Kgs
Field Strength : With poles together 7000 guass
: In centre of a 50mm air gap 400 guass
Yoke Weight : 2.5 Kgs
Battery Operation : Not applicable
Re-magnetisation : Not required
May 2017 / RJ
8, 2nd Floor, Jyoti Wire House, Near Kolsite, Off Veera Desai Road, Andheri (W),Mumbai 400 053. India
Tel No.: +91-22-6150 3800 / 26 / 40 ♦ Fax:- +91-22-6691 9792
Email: ndtsales@eecindia.com ♦ Web: www.eecindia.com
Regional Ofces: CHENNAI, BANGALORE, KOLKATA, HYDERABAD, PUNE, PATNA, NAGPUR, NEW DELHI, VADODARA