Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

STW 6500

Egg tray washer


The STW 6500 Egg Tray Washer combines high output with top-class washing performance, at
a low cost. Food safety and hygiene have been in focus and in terms of washing, drying, and
sanitation performance it is not surpassed by any other machine. The STW 6500 has a washing
and drying capacity up to 6,500 trays/hour.

FEATURES:
SAFE DE-STACKING OF DIRTY TRAYS
The STW 6500 is equipped with a new safe de-
stacking system which ensures a continuous The tray washer is equipped with a

and safe production even with very dirty trays. number of features ensuring a trouble-free

The stack of dirty trays is secured by eight claws, and safe operation.

while four claws force the bottom tray on to the High pressure water pump spraying 80
conveyor. Furthermore the discharge system is m3/h -350 GPM of pressurised
easily adjusted for different types of plastic trays. water (5 bar -70 psi) through 164 power
nozzles.
REDUCING OPERATION COSTS High-Speed spinner working at 840
The STW 6500 has been designed with the primary goal in mind – to reduce operating costs rpm equipped with safety switch and
by substantial cuts in the manpower needed. Including high capacity, top-class washing stability sensor.
performance and low energy costs - the pay-back time of the tray washer is short. Open design for easy access during
cleaning and maintenance.
WASHING WITH POWER NOZZLES
The trays are loaded / unloaded in
In the wash chamber power nozzles are placed closely above and underneath the trays. By
an ergonomically correct way for the
spraying large volume of pressurised water, the dirt on the trays is simply blasted off. No dirt
operator.
will remain on the trays after the power nozzles have done their work. The water is filtered and
recycled to minimise the use of fresh water. After washing, the trays can be disinfected by a Safety fences and doors are equipped
sanitiser spray bar. with safety switches for operator safety
The number of required operators
STACKING AND COUNTING AVOID EXTRA HANDLING are lowered to only one.
After the washing section each individually washed tray is automatically counted and stacked
according to a preset number of trays per stack.
Having the same number of washed trays in each stack avoids extra handling when unloading the
clean trays for recycling.

SAFETY AND SERVICE


DRY TRAYS IMPROVE HYGIENE
All SANOVO products and systems are
The spinner has a speed of 840 rpm leaving the trays absolutely dry and ready for use.
designed to meet the industry safety
standards.
THE PERFORMANCE IS MONITORED
The entire washing operation is easily controlled from a touch display. Parameters such as speed, A comprehensive service organisation
spinning time etc, may be changed simply by pressing one of the pictograms and entering the is always available to assist in the
desired value. During production the performance as well as speed, run time, down time, number selection of the right maintenance
of trays washed, spinning time, error codes etc. are continuously shown on the display. STW 6500 programme or individual spare part.
is equipped with two local operator panels on the washer and one local operator panel on the
spinner for start/stop, reset and emergency stop.

www.sanovogroup.com
OPTIONS:
Left, right or straight conveying
system for washed trays
Direct or in direct steam heating or
electrical heating of wash water
Sanitiser spraybar for sanitising of
washed trays
Automatic loading of trays
CIP-cleaning
Separate washer module for after
rinsing

www.sanovogroup.com

You might also like