Professional Documents
Culture Documents
Maz 10 Ym - MH - Ea 403 - 03 - RNCC
Maz 10 Ym - MH - Ea 403 - 03 - RNCC
Title:
Prepared: SCD
Jorge Jimenez
Mur
2020.09.25
14:10:55
+02'00'
Reviewed: JJM
(FOR) Jorge
FOR OWNER REVIEW
Jimenez Mur
2020.09.25
The document has been reviewed and is sent 14:11:14
for owner review Approved: JJM +02'00'
This status does not release the Supplier from its responsibilities
related to the contractual requirements.
This document contains proprietary information of Empresarios Agrupados Internacional, S.A. and is to be used solely for the Project and the purpose for which it is furnished.
It may not be disclosed to others for a different use without the written permission of Empresarios Agrupados Internacional,S.A.
CLASSIFICATION
Contains information for the design of structures, systems or components: Yes No
Design verification : Not applicable Head of OU/Supervisor Verifier Level 1 Level 2
CONTROL OF MODIFICATIONS
Issue Modifications
01 Not applicable to first issue
02 Sheets added: AB3r, AB3f, BB2s, BB3r, BB3f, DB1f, FC1r, XC5
Sheets updated: AA1, AA1f, BA1, BA2f, FA2r, BB1f, BB2r, EB2r, AC1, AC1r, AC2, BC1, DC1, AL1, AM1s,
AM2y, AM3, AM3x, AM3y, AM3z
Sheets deleted: AM2z
Modifications are marked with a vertical line at right margin.
03 Sheets added: DB2f, DB3f
Sheets updated: AA1, AA1f, BA1, GA2r, AB3f, BB1f, BB1s, BB3f, EB2r, AC1, AL1, AM2, AM3x
DISTRIBUTION
External Internal No. copies/Format
COBRA OMN, FBL, SLI, ALY, IPP, JVH, MMO, AAA, BPG, CPH, 1/ electronic file
JZH, JJM, ESO, MOR, SCD, AGD
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page i
CONTENTS
Page No.
1. PURPOSE................................................................................................................ 1-1
2. SCOPE .................................................................................................................... 2-1
3. CODES AND STANDARDS ..................................................................................... 3-1
4. PIPING DESIGNATION ........................................................................................... 4-1
4.1 GENERAL ............................................................................................................ 4-1
4.2 ADDITIONAL INFORMATION .............................................................................. 4-3
4.2.1 Corrosion Allowance Factors .............................................................. 4-3
4.2.2 Bolting Materials ................................................................................. 4-3
5. PIPING DATA SHEETS ........................................................................................... 5-1
5.1 PIPING DATA SHEETS TABLE............................................................................ 5-1
5.2 PIPING DATA SHEETS INFORMATION .............................................................. 5-2
5.3 BRANCH CONNECTIONS ................................................................................... 5-3
5.3.1 Branch Connections table (General Application) ................................ 5-3
5.3.2 Branch Connections table applicable only to sheet AL1
(Galvanized) ....................................................................................... 5-4
APPENDIX A PIPING DATA SHEETS
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 1-1
1. PURPOSE
The purpose of this document is to define the piping data sheets applicable to the Marlim Azul
Combined Cycle Power Plant (hereinafter Marlim Azul), in order to develop the design of the
different systems and the piping layout of the plant.
The information contained in this document has to be supplemented with the corresponding
technical specifications for the purpose of purchasing piping materials and all the accessories
(fittings, flanges, etc.).
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 2-1
2. SCOPE
The data sheets included apply to the design of piping, valves, flanges, fittings, specialities
and terminal points for the equipment and package plants of the Marlim Azul.
This document includes the collection of Piping Data Sheets that can be applied in the
development of the different systems of the Marlim Azul, according to the particular
characteristics of each system.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 3-1
ASME B16.20 Metallic Gaskets for Pipe Flanges. Ring-Joint, Spiral-Wound, and
Jacketed.
ASME B16.47 Large diameter steel flanges. NPS 26 through NPS 60.
DIN 8078 Polypropylene pipes PP-H, PP-B, PP-R, PP-RCT General quality
requirements and testing
DIN 16962 Pipe joints and elements for polypropilene (PP) pressure
pipelines.
DIN 16963 Pipe Joints & Elements for High Density Polyethylene Pressure
Pipelines
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 4-1
4. PIPING DESIGNATION
4.1 GENERAL
The lines included in P&IDs and in the piping isometric drawings are identified according to
Piping Class. The designation of each Piping Class in the piping data sheets is established
according to the following code:
Piping Class
( A A N (a optional)
Lower-case letter corresponding to specific
characteristics of the data sheet (see below)
Material type
A- Alphabetic character
N- Numerical character
Piping class designation is established by means of two capital letters, one number and one
lower-case letter:
The first capital letter, indicates the pressure class, according to Table 4-1 below:
Table 4-1
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 4-2
The second capital letter indicates the type of material, in accordance with Table 4-2:
Table 4-2
The third numerical character indicates the grade of the material within a specific
material, in accordance with Table 4-3:
Table 4-3
Grade / Non-metal
Type of Material Third character
type
A-106 Gr. B / A-672
1
Carbon steel Gr. B70 CL22
A-106 Gr. C 2
A-335 Gr. P91 1
Alloy steel A-335 Gr. P22 2
A-335 Gr. P11 3
A-312 Gr. TP304L 1
Stainless steel A-312 Gr. TP316L 2
A-312 Gr. TP316 3
Galvanized steel A-53 Gr. B 1
PE 100 1
PP-R 2
Non-metal (Plastic)
GRP-UP 3
PVC-U 4
Finally, the lower-case letter indicates specific characteristics of the data sheet, in
accordance with Table 4-4:
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 4-3
Table 4-4
The following corrosion allowance factors have been taken into account in the pipe wall
thickness calculation:
Bolts Grade B7 and B16 shall be hot dip galvanized or cadmium plating or equivalent
protection. Grade B8 and B8R shall not be plated or coated but must be passivated or
preoxidized.
Nuts Grade 2H and 7 shall be hot dip galvanized or cadmium plating or equivalent protection.
Grade 8 and 8R shall not be plated or coated but must be passivated or preoxidized.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 5-1
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 5-2
Each Carbon Steel, Alloy Steel and Stainless Steel Piping Class, consists on two different
sheets:
Sheet one (1) includes design information for straight pipes and components
- Threading
- Bends
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page 5-3
HEADER SIZE
40 38 36 34 32 30 28 26 24 20 18 16 14 12 10 8 6 4 3 2½ 2 1½ 1 ¾ ½
½ S S S S S S S S S S S S S S S S S S S S S SR SR SR ST
¾ S S S S S S S S S S S S S S S S S S S S SR SR SR ST
1 S S S S S S S S S S S S S S S S S S S S SR SR ST
1½ S S S S S S S S S S S S S S S S S S S S SR ST
2 S S S S S S S S S S S S S S S S S S S R ST
2½ W W W W W W W W W W W W W W W W R R R T
3 W W W W W W W W W W W W W W W W R R T
4 W W W W W W W W W W W W W W R R R T
6 W W W W W W W W W W W R R R R R T
8 W W W W W W W W W R R R R R R T
10 W W W W W R W W R R R R R R T
BRANCH SIZE
12 W W W W W R R R R R R R R T
14 W W W W R R R R R R R R T
16 W W R R R R R R R R R T KEY
18 R R R R R R R R R R T R - BUTT WELDING REDUCING TEE
20 R R R R R R R R R T S - SOCKOLET
30 R R R R R T W - WELDOLET
32 R R R R T
34 R R R T
36 R R T
38 R T
40 T
Notes:
a) The sockolets can be replaced with half coupling in Pressure Class 150, 300 and 600 piping. The
halfcoupling connections shall be made with full penetration welds.
HEADER SIZE
32 30 28 26 24 20 18 16 14 12 10 8 6 4 3 2½ 2 1½ 1 ¾ ½
½ TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TR TR TR TT
¾ TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TR TR TR TT
1 TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TR TR TT
1½ TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TR TT
2 TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TH TT
2½ W W W W W W W W W W W W R R R T
3 W W W W W W W W W W W W R R T
4 W W W W W W W W W W R R R T
BRANCH SIZE
6 W W W W W W W R R R R R T
8 W W W W W R R R R R R T
10 W R W W R R R R R R T
12 W R R R R R R R R T
14 R R R R R R R R T
16 R R R R R R R T KEY
18 R R R R R R T R - BUTT WELDING REDUCING TEE
20 R R R R R T TH - THREDOLET
26 R R R T TT - THREADED TEE
30 R T W - WELDOLET
32 T
Notes:
a) The thredolets can be replaced with threaded half coupling in Pressure Class 150 piping. The half
coupling connections shall be made with full penetration welds.
b) The pipe-to-pipe connections can be used in DN ³ 6” piping for Pressure Class 150 with or without
reinforcement (according to ASME B31.1).
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-1
APPENDIX A
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-2
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 19.7 17.9 15.9 13.8 11.7 9.7 8.6 7.6 6.6 vacuum
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-3
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 19,7 17,9 15,9 13,8 11,7 9,7 8,6 7,6 6,6 vacuum
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
NOTES (1) For natural gas pipes, flat teflon gaskets shall be used in the flanged connections (ASME B
16.21)
(2) Butterfly valves body shall be cast iron A-536 Gr. 60-40-18
(3) Butterfly valves smaller than 450mm (18") shall be wafer or wafer lug
(4) Butterfly valves larger or equal to 450mm (18") shall be flanged
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-4
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-5
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1) Butterfly valves body shall be cast iron A-536 Gr. 60-40-18.
NOTES
(2) Butterfly valves smaller than 450mm (18") shall be wafer or wafer lug.
(3) Butterfly valves larger or equal to 450mm (18") shall be flanged.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-6
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 752
CONDITIONS (2) Pressure (bar g) 51,0 46,9 45,2 43,8 41,7 39,3 37,9 36,5 34,7 vacuum
65mm (2 ½")
and A-216 Gr. WCB AB1CB AB1TB AB1RB AB1SB AB1AF
larger
See sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-7
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 752
CONDITIONS (2) Pressure (bar g) 51,0 46,9 45,2 43,8 41,7 39,3 37,9 36,5 34,7 vacuum
Notes
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1) WTH is the nominal wall thickness tn
(2) This piping data sheet has been also calculated for vacuum conditions
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-8
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
50mm (2") and
80 (XS)
smalller
65mm to 200mm
80 (XS)
(2 ½" to 8")
250mm (10") 40 (STD)
500mm to
600mm (20" to 20 (STD)
24")
50mm (2") and
Class 3000 SW A-105 ASME B16.11
smaller
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WPC ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-105 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
ALL - -
NUTS A-194 Gr. 2H ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
(2 ½")
A-216 Gr. WCC AB1CB AB1TB AB1KB AB1QB
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-9
15mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(½")
20mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(¾")
25mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1")
40mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1 ½")
50mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(2")
65mm
80 (XS) - - 40 (STD) 40 (STD)
(2 ½")
80mm
80 (XS) - - 40 (STD) 40 (STD)
(3")
100mm
80 (XS) - - 40 (STD) 40 (STD)
(4")
150mm
80 (XS) - - 40 (STD) 40 (STD)
(6")
200mm
80 (XS) - - 40 (STD) 40 (STD)
(8")
250mm
40 (STD) - - 40 (STD) 40 (STD)
(10")
300mm
STD - - STD STD
(12")
350mm
30 (STD) - - 30 (STD) 30 (STD)
(14")
400mm
30 (STD) - - 30 (STD) 30 (STD)
(16")
450mm
STD - - STD STD
(18")
500mm
20 (STD) - - 20 (STD) 20 (STD)
(20")
600mm
20 (STD) - - XS 20 (STD)
(24")
Design conditions for BA2f Piping Class correspond to lower values than Pressure-Temperature
Rating Class 600 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-10
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 102,0 93,8 90,3 87,2 83,1 78,3 75,8 73,1 70,0
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm (2 ½")
and A-216 Gr. WCB AD1CB AD1TB AD1QB AD1AF
larger AD1RB
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-11
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 102,0 93,8 90,3 87,2 83,1 78,3 75,8 73,1 70,0
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1) WTH is the nominal wall thickness tn
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-12
Temperature (º C) 404
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
50mm (2") and
80 (XS)
smalller
65mm to 250mm
40 (STD)
(2 ½" to 10")
300mm (12") STD
350mm (14") 40
PIPES PE A-106 Gr. C ASME B36.10M
400mm (16") 40 (XS)
450mm (18") XS
500mm to
600mm (20" to 40
24")
50mm (2") and
Class 3000 SW A-105 ASME B16.11
smaller
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WPC ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-105 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
65mm
(2 ½")
A-216 Gr. WCC AD1CB AD1TB AD1KB AD1QB
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-13
SYSTEMS: Steam
15mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(½")
20mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(¾")
25mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1")
40mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1 ½")
50mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(2")
65mm
40 (STD) - - 40 (STD) 40 (STD)
(2 ½")
80mm
40 (STD) - - 40 (STD) 40 (STD)
(3")
100mm
40 (STD) - - 40 (STD) 40 (STD)
(4")
150mm
40 (STD) - - 40 (STD) 80 (XS)
(6")
200mm
40 (STD) - - 40 (STD) 60
(8")
250mm
40 (STD) - - 40 (STD) 60 (XS)
(10")
300mm
STD - - 40 XS
(12")
350mm
40 - - 40 XS
(14")
400mm
40 (XS) - - 40 (XS) 60
(16")
450mm
XS - - 40 60
(18")
500mm
40 - - 40 60
(20")
600mm
40 - - 40 60
(24")
Design conditions for DA2r Piping Class correspond to lower values than Pressure-Temperature
Rating Class 600 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-14
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 153,1 140,3 135,5 131,0 124,8 117,6 113,8 109,6 104,8
Boiler Feed Water, Natural Gas and Data shown in Sheet 1 of 2 have been calculated for straight
SYSTEMS:
Instrument Piping buttwelded pipe. For other conditions see Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
25mm (1") and
80 (XS)
smaller
40mm to 50mm
160
(1 1/2" to 2")
65mm (2 1/2") 80 (XS)
PIPES 80mm (3") 160 PE A-106 Gr. B ASME B36.10M
100mm to 250mm
120
(4" to 10")
300mm (12") 120 (XXS)
350mm to 600mm
120
(14" to 24")
25mm (1") and
Class 3000 (SW)
smaller
SW/TH A-105 ASME B16.11
40mm to 50mm
FITTINGS Class 6000 (SW)
(1 1/2" to 2")
65mm to 600mm
Match to pipe BW A-234 Gr. WPB ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smalller
FLANGES Class 900 A-105 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with external
GASKETS ALL - - 304 SS centering ring according to ASME
B16.20
STUD BOLTS ALL - - A-193 Gr. B7 ASME B18.2.1
BRANCH
ALL - - See applicable section
CONNECTIONS
VALVES
65mm
(2 ½")
A-216 Gr. WCB AE1CB AE1TB AE1KB AE1QB AE1AF
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-15
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 153,1 140,3 135,5 131,0 124,8 117,6 113,8 109,6 104,8
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-16
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 256 234 226 219 208 196 189 184 175
Temperature (º C) -29 to 38 93 149 204 260 316 343 371 399
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
50mm (2") and
160
smalller
65mm to 100mm
160
(2 ½" to 4")
150mm (6") XXS
25,40mm
200mm (8")
(1.000") WTH (1)
30.18mm
250mm (10")
(1.188") WTH (1)
34.93mm
300mm (12")
PIPES (1.375") WTH (1) PE A-106 Gr. C ASME B36.10M
38.10mm
350mm (14")
(1.500") WTH (1)
42.86mm
400mm (16")
(1.688") WTH (1)
47.63mm
450mm (18")
(1.875") WTH (1)
52.39mm
500mm (20")
(2.063") WTH (1)
61,91mm
600mm (24")
(2.438") WTH (1)
50mm (2") and
Class 6000 SW A-105 ASME B16.11
smaller
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WPC ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 1500 A-105 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
ALL - -
NUTS A-194 Gr. 2H ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
(2 ½")
A-216 Gr. WCC AF1CB AF1TB AF1KB AF1QB
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-17
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 256 234 226 219 208 196 189 184 175
Temperature (º C) -29 to 38 93 149 204 260 316 343 371 399
SYSTEMS: Steam
15mm
80 (XS) Not allowed - 160 XXS
(½")
20mm
80 (XS) Not allowed - 160 160
(¾")
25mm
80 (XS) Not allowed - 160 160
(1")
40mm
80 (XS) Not allowed - 160 XXS
(1 ½")
50mm
80 (XS) Not allowed - 160 XXS
(2")
65mm
40 (STD) - - XXS XXS
(2 ½")
80mm
40 (STD) - - XXS XXS
(3")
100mm
40 (STD) - - XXS XXS
(4")
150mm
40 (STD) - - XXS 23,83mm (0.938") WTH
(6")
200mm 25.40mm
40 (STD) - - 30.18mm (1.188") WTH
(8") (1.000") WTH
250mm 31.75mm
40 (STD) - - 36.53mm (1.438") WTH
(10") (1.250") WTH
300mm 36.53mm
STD - - 42.86mm (1.688") WTH
(12") (1.438") WTH
350mm 41.28mm
40 - - 46.05mm (1.813") WTH
(14") (1.625") WTH
400mm 46.05mm
40 (XS) - - 52.39mm (2.063") WTH
(16") (1.813") WTH
450mm 50.80mm
XS - - 58.74mm (2.313") WTH
(18") (2.000") WTH
500mm 57.14mm
40 - - 65.09mm (2.563") WTH
(20") (2.250") WTH
600mm 68.26mm
40 - - 78.82mm (3.063") WTH
(24") (2.688") WTH
Design conditions for FA2 Piping Class correspond to values according to Pressure-Temperature
Rating Class 1500 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1)WTH is the nominal wall thickness tn
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-18
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
PIPES 80 (XS) PE A-106 Gr. C ASME B36.10M
150mm (6")
200mm (8") to
100
600mm (24")
15mm (½") to
Class 3000 SW A-105 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WPC ASME B16.9
600mm (24")
15mm (½") to
SW SW/RF
50mm (2")
FLANGES Class 1500 A-105 ASME B16.5
65mm (2 ½”) to
BW WN/RF
600mm (24")
Spiral wound gasket with external
GASKETS ALL - - 304 SS centering ring according to ASME
B16.20
ALL - -
STUD BOLTS A-193 Gr. B7 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 2H ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
(2 ½")
A-216 Gr. WCC AF1CB AF1TB AF1KB AF1QB
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-19
Temperature (º C) 263
15mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(½")
20mm
80 (XS) Not allowed - 80 (XS) 160
(¾")
25mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1")
40mm
80 (XS) Not allowed - 80 (XS) 80 (XS)
(1 ½")
50mm
80 (XS) Not allowed - 80 (XS) 160
(2")
65mm
80 (XS) - - 80 (XS) 160
(2 ½")
80mm
80 (XS) - - 80 (XS) 160
(3")
100mm
80 (XS) - - 80 (XS) 120
(4")
150mm
80 (XS) - - 120 120
(6")
200mm
100 - - 100 120
(8")
250mm
100 - - 100 120
(10")
300mm
100 - - 100 120 (XXS)
(12")
350mm
100 - - 100 120
(14")
400mm
100 - - 100 120
(16")
450mm
100 - - 100 120
(18")
500mm
100 - - 100 120
(20")
600mm
100 - - 100 120
(24")
Design conditions for FA2r Piping Class correspond to lower values than Pressure-Temperature
Rating Class 1500 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-20
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm to 25mm
160
(½" to 1")
40mm to 50mm
XXS
(1 ½" to 2")
65mm to 150mm
XXS
(2 ½" to 6")
28.58mm
200mm (8")
(1.125") WTH (1)
34.93mm
250mm (10")
(1.375") WTH (1)
41.28mm
PIPES 300mm (12") PE A-106 Gr. C ASME B36.10M
(1.625") WTH (1)
44.45mm
350mm (14")
(1.750") WTH (1)
50.80mm
400mm (16" )
(2.000") WTH (1)
57.14mm
450mm (18" )
(2.250") WTH (1)
61.91mm
500mm (20")
(2.438") WTH (1)
74.61mm
600mm (24")
(2.938") WTH (1)
50mm (2") and
Class 6000 SW A-105 ASME B16.11
smaller
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WPC ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 2500 A-105 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with external
GASKETS ALL - - 304 SS centering ring according to ASME
B16.20
ALL - -
STUD BOLTS A-193 Gr. B7 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 2H ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
(2 ½") AG1TB
A-216 Gr. WCC AG1CB AG1KB AG1QB
and AG1LB
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-21
SYSTEMS: Feedwater
15mm
160 Not allowed - 160 XXS
(½")
20mm
160 Not allowed - 160 XXS
(¾")
25mm
160 Not allowed - 160 XXS
(1")
40mm
XXS Not allowed - XXS XXS
(1 ½")
50mm 12.70mm (0.500")
XXS Not allowed - XXS
(2") WTH
65mm
XXS - - XXS XXS
(2 ½")
80mm 15.88mm (0.625")
XXS - - XXS
(3") WTH
100mm 20.62mm (0.813")
XXS - - XXS
(4") WTH
150mm 23.83mm (0.938") 28.58mm (1.125")
XXS - -
(6") WTH WTH
200mm 28.58mm 30.18mm (1.188") 34.93mm (1.375")
- -
(8") (1.125") WTH WTH WTH
250mm 34.93mm 38.10mm (1.500") 42.86mm (1.688")
- -
(10") (1.375") WTH WTH WTH
300mm 41.28mm 44.45mm (1.750") 50.80mm (2.000")
- -
(12") (1.625") WTH WTH WTH
350mm 44.45mm 47.63mm (1.875") 55.58mm (2.188")
- -
(14") (1.750") WTH WTH WTH
400mm 50.80mm 53.98mm (2.125") 63.50mm (2.500")
- -
(16") (2.000") WTH WTH WTH
450mm 55.58mm 60.33mm (2.375") 69.85mm (2.750")
- -
(18") (2.188") WTH WTH WTH
500mm 61.93mm 66.68mm (2.625") 77.80mm (3.063")
- -
(20") (2.438") WTH WTH WTH
600mm 74.63mm 80.98mm (3.188") 93.67mm (3.688")
- -
(24") (2.938") WTH WTH WTH
Design conditions for GA2r Piping Class correspond to lower values than Pressure-Temperature
values of Rating Class 2500 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1)WTH is the nominal wall thickness tn
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-22
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm to 25mm
160
(½" to 1")
40mm to 50mm
XXS
(1 ½" to 2")
65mm to 150mm
XXS
(2 1/2" to 4")
23.83mm
150mm (6")
(0.938") WTH (1)
28.68mm
200mm (8")
(1.250") WTH (1)
38.10mm
250mm (10")
(1.500") WTH (1)
PIPES PE A-106 Gr. C ASME B36.10M
44.45mm
300mm (12")
(1.750") WTH (1)
49.21mm
350mm (14")
(1.938") WTH (1)
55.56mm
400mm (16" )
(2.188") WTH (1)
61.91mm
450mm (18" )
(2.438") WTH (1)
57.77mm
500mm (20")
(2.750") WTH (1)
82.53mm
600mm (24")
(3.250") WTH (1)
15mm to 25mm
Class 6000
(½" to 1")
SW A-105 ASME B16.11
40mm to 50mm
FITTINGS Class 9000
(1 ½" to 2")
65mm to 600mm
Match to pipe BW A-234 Gr. WPC ASME B16.9
(2 ½" to 24")
GASKETS N/A - - - -
- -
STUD BOLTS N/A - -
- -
NUTS N/A - -
BRANCH - -
N/A - -
CONNECTIONS
VALVES
65mm
(2 ½")
A-216 Gr. WCC AH1CB AH1TB AH1KB AH1QB
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-23
SYSTEMS: Feedwater
15mm
160 Not allowed - XXS XXS
(½")
20mm
160 Not allowed - XXS XXS
(¾")
25mm
160 Not allowed - XXS XXS
(1")
40mm
XXS Not allowed - XXS XXS
(1 ½")
50mm
XXS Not allowed - XXS 12.70mm (0.500") WTH
(2")
65mm
XXS - - XXS 14.27mm (0.563") WTH
(2 ½")
80mm
XXS - - XXS 17.48mm (0.688") WTH
(3")
100mm
XXS - - 19.05mm (0.750") WTH 22.23mm (0.875") WTH
(4")
150mm 23,83mm (0.938")
- - 26.97mm (1.063") WTH 30.18mm (1.188") WTH
(6") WTH (1)
200mm 31.75mm
- - 7.92mm (1.313") WTH 39.67mm (1.563") WTH
(8") (1.250") WTH
250mm 38.10mm (1.500")
- - 41.28mm (1.625") WTH 47.63mm (1.875") WTH
(10") WTH
300mm 44.45mm (1.750")
- - 49.21mm (1.938") WTH 55.56mm (2.188") WTH
(12") WTH
350mm 49.21mm (1.938")
- - 52.39mm (2.063") WTH 61.91mm (2.438") WTH
(14") WTH
400mm 55.56mm (2.188")
- - 60.31mm (2.375") WTH 57.77mm (2.750") WTH
(16") WTH
450mm 52.39mm (2.438")
- - 68.28mm (2.688") WTH 77.79mm (3.063") WTH
(18") WTH
500mm 57.77mm (2.750")
- - 74.61mm (2.938") WTH 85.71mm (3.375") WTH
(20") WTH
600mm 82.53mm (3.250")
- - 88.88mm (3.500") WTH 103.18mm (4.063") WTH
(24") WTH
Design conditions for HA2r Piping Class correspond to lower values than Pressure-Temperature values of
Rating Class 4500 for group 1-1 materials, according to ASME B 16.34, Table 2-1.1
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1)WTH is the nominal wall thickness tn
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-24
BRANCH
ALL - - See applicable section
CONNECTIONS
VALVES
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6 AA2CB
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-25
SYSTEMS: Steam turbine drains dystem. Seal steam system. GT Auxiliaries (Flashing)
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-26
Temperature (º C) 425
Data shown in Sheet 1 of 2 have been calculated for
Steam turbine drains dystem. Seal steam
SYSTEMS: straight buttwelded pipe. For other conditions see Sheet
system.
2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
( ½" to 2")
65mm to 250mm
40 (STD)
(2 ½" to 10")
300 mm (12") STD
PIPES 350mm (14") 30 (STD) PE A-335 Gr. P11 ASME B36.10M
400mm (16") 30 (STD)
450mm (18") STD
500mm to
600mm 20 (STD)
(20" to 24")
BRANCH
ALL - - See applicable section
CONNECTIONS
VALVES
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6 AA2CB
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-27
Temperature (º C) 425
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-28
Temperature (º C) 594
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Hot Reheat Steam (Flashing) straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
80 (XS)
200mm (8")
250mm (10") 40 (STD)
PIPES 300mm (12") STD
350mm (14") to
30 (STD)
400mm (16") PE A-335 Gr. P91 ASME B36.10M
450mm (18") STD
500mm (20") to
20 (STD)
600mm (24")
650mm (26") to
20 (XS)
850mm (34")
900mm (36") 30
50mm (2") and
Class 3000 SW/TH A-182 Gr. F91 ASME B16.11
smaller
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP91 ASME B16.9
900mm (36")
50mm (2") and
SW SW/RF
smaller
A-182 Gr. F91 ASME B16.5
50mm (2") to
FLANGES Class 600 BW WN/RF
600mm (24")
650mm (26") to
WN/RF ASME B16.47 Series A
900mm (36")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
65mm
AB4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-29
Temperature (º C) 594
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-30
Temperature (º C) 579
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam. straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
40 (STD)
200mm (8")
250mm (10") 40 (STD)
PIPES 300mm (12") STD PE A-335 Gr. P91 ASME B36.10M
350mm (14") to
30 (STD)
400mm (16")
450mm (18") STD
500mm (20") to
20 (STD)
600mm (24")
50mm (2") and
Class 3000 SW/TH A-182 Gr. F91 ASME B16.11
smaller
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP91 ASME B16.9
900mm (36")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-182 Gr. F91 ASME B16.5
65mm (2") to
BW WN/RF
600mm (24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
65mm
AB4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-31
Temperature (º C) 579
SYSTEMS: Steam.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-32
Temperature (º C) 594
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Hot Reheat Steam (Flashing) straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
80 (XS)
200mm (8")
250mm (10") 40 (STD)
PIPES 300mm (12") STD
350mm (14") to PE A-335 Gr. P91 ASME B36.10M
30 (STD)
400mm (16")
450mm (18") STD
500mm (20") 20 (STD)
600mm (24") XS
15mm (½") to
Class 3000 SW/TH A-182 Gr. F91 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP91 ASME B16.9
600mm (24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 300 A-182 Gr. F91 ASME B16.5
50mm (2") to
BW WN/RF
600mm (24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
65mm
AB4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-33
Temperature (º C) 594
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-34
Temperature (º C) 510
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam (Flashing) straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½")
80 (XS)
to 200mm (8")
250mm (10") 40 (STD)
300mm (12") STD
PIPES PE A-335 Gr. P22 ASME B36.10M
350mm (14")
30 (STD)
to 400mm
450mm (18") STD
500mm (20")
to 600mm 20 (STD)
(24")
15mm (½”) to
Class 3000 SW / TH A-182 Gr. F22 CL3 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½")
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
to 600mm
15mm (½”) to
SW SW/RF
50mm (2")
FLANGES Class 300 A-182 Gr. F22 CL3 ASME B16.5
65mm (2 ½")
BW WN/RF
to 600mm
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F22
and
Cl.3
smaller
65mm (2 ½")
AB3LB
and A-217 Gr. WC9 AB3CB AB3KB AB3RB
AB3TB
larger
See sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-35
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-36
Temperature (º C) 534
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½")
to 250mm 40 (STD)
(10")
300mm (12") STD
PIPES PE A-335 Gr. P22 ASME B36.10M
350mm (14")
30 (STD)
to 400mm
450mm (18") STD
500mm (20")
to 600mm 20 (STD)
(24")
15mm (½”) to
Class 3000 SW / TH A-182 Gr. F22 CL3 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½")
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
to 600mm
15mm (½”) to
SW SW/RF
50mm (2")
FLANGES Class 300 A-182 Gr. F22 CL3 ASME B16.5
65mm (2 ½")
BW WN/RF
to 600mm
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F22
and AD3TS AD3PS AD3BS
Cl.3
smaller
65mm (2 ½")
AB3LB
and A-217 Gr. WC9 AB3CB AB3KB AB3RB
AB3TB
larger
See sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-37
Temperature (º C) 534
SYSTEMS: Steam
(1) This piping data sheet has been also calculated for vacuum conditions.
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-38
Temperature (º C) 520
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: GT Auxiliaries straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½")
to 250mm 40 (STD)
(10")
PIPES PE A-335 Gr. P22 ASME B36.10M
300mm (12") STD
350mm (14")
30 (STD)
to 400mm
450mm (18") STD
500mm (20") 30 (XS)
600mm (24") XS
15mm (½”) to
Class 3000 SW / TH A-182 Gr. F22 CL3 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½")
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
to 600mm
15mm (½”) to
SW SW/RF
50mm (2")
FLANGES Class 300 A-182 Gr. F22 CL3 ASME B16.5
65mm (2 ½")
BW WN/RF
to 600mm
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F22
and
Cl.3
smaller
65mm (2 ½")
AB3LB
and A-217 Gr. WC9 AB3CB AB3KB AB3RB
AB3TB
larger
See sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-39
Temperature (º C) 520
SYSTEMS: GT Auxiliaries
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-40
Temperature (º C) 425
Data shown in Sheet 1 of 2 have been calculated for
Steam turbine drains dystem. Seal steam
SYSTEMS: straight buttwelded pipe. For other conditions see Sheet
system, Auxiliary Steam (Flashing)
2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
( ½" to 2")
65mm to 200mm
80 (XS)
(2 ½" to 8")
300 mm (10") STD
300 mm (12") STD
PIPES PE A-335 Gr. P11 ASME B36.10M
350mm (14") 30 (STD)
400mm (16") 30 (STD)
450mm (18") STD
500mm to
600mm 20 (STD)
(20" to 24")
BRANCH
ALL - - See applicable section
CONNECTIONS
VALVES
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6 AB2CB
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-41
Temperature (º C) 425
SYSTEMS: Steam turbine drains dystem. Seal steam system, Auxiliary Steam (Flashing)
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-42
Temperature (º C) 425
Data shown in Sheet 1 of 2 have been calculated for
Steam turbine drains dystem. Seal steam
SYSTEMS: straight buttwelded pipe. For other conditions see Sheet
system.
2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
( ½" to 2")
65mm to 250mm
40 (STD)
(2 ½" to 10")
300 mm (12") STD
PIPES 350mm (14") 30 (STD) PE A-335 Gr. P11 ASME B36.10M
400mm (16") 30 (STD)
450mm (18") STD
500mm to
600mm 20 (STD)
(20" to 24")
15mm to 50mm Class 3000
SW/TH A-182 Gr. F11 CL2 ASME B16.11
( ½" to 2") (SW)
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP11 CL1 ASME B16.9
(2 ½" to 24")
15mm to 50mm
SW SW/RF
( ½" to 2")
FLANGES Class 300 A-182 Gr. F11 CL2 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6 AB2CB AB2TB
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-43
Temperature (º C) 425
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-44
Temperature (º C) 595
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam & drains (Flashing) straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
(½" to 2")
65mm to 200mm
80 (XS)
(2 ½” to 8")
PIPES 250mm (10") 60 (XS) PE A-335 Gr. P91 ASME B36.10M
300mm (12") XS
350mm to 600mm
60
(14" to 24")
50mm (2") and Class 3000
SW/TH A-182 Gr. F91 ASME B16.11
smaller (SW)
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP91 ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-182 Gr. F91 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
50mm (2")
and A-182 Gr. F91 AD4TS AD4PS AD4BS
smaller
65mm
(2 ½")
A-217 Gr. C12A AD4CB
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-45
Temperature (º C) 595
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-46
Temperature (º C) 594
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Hot Reheat Steam. straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
(½" to 2")
65mm to 150mm
40 (STD)
(2 ½” to 6")
200mm (8") 60
PIPES
250mm (10") 60 (XS)
PE A-335 Gr. P91 ASME B36.10M
300mm to 350mm
XS
(12" to 14")
400mm to 600mm
60
(16" to 24")
22.23mm
650mm (26")
(00.875") WTH
50mm (2") and Class 3000
SW/TH A-182 Gr. F91 ASME B16.11
smaller (SW)
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP91 ASME B16.9
(2 ½" to 24")
50mm (2") and
SW SW/RF
smaller
Class 600 A-182 Gr. F91 ASME B16.5
FLANGES 65mm to 600mm
BW WN/RF
(2 ½" to 24")
650mm (26") WN/RF ASME B16.47 Series A
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - - See applicable
CONNECTIONS section
VALVES
65mm
AD4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-47
Temperature (º C) 594
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-48
Temperature (º C) 591
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
40 (STD)
250mm (10")
PIPES PE A-335 Gr. P91 ASME B36.10M
300mm (12") to
XS
350mm (14")
400mm (16") to
60
600mm (24")
50mm (2") and
Class 3000 SW/TH A-182 Gr. F91 ASME B16.11
smaller
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP91 ASME B16.9
900mm (36")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-182 Gr. F91 ASME B16.5
65mm (2 ½”) to
BW WN/RF
600mm (24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - - See applicable
CONNECTIONS section
VALVES
65mm
AD4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-49
Temperature (º C) 591
SYSTEMS: Steam
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-50
Temperature (º C) 549
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam turbine drains (Flashing) straight buttwelded pipe. For other conditions see Sheet 2
of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
(½" to 2")
65mm to 200mm
80 (XS)
(2 ½” to 8")
250mm (10") 60 (XS)
PIPES 300mm (12") STD PE A-335 Gr. P22 ASME B36.10M
350mm (14") 30 (STD)
400mm (16") 40 (XS)
450mm (18") 30
500mm (20") 30 (XS)
600mm (24") 30
25mm to 50mm
Class 3000 SW/TH A-182 Gr. F22 CL3 ASME B16.11
(½" to 2")
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
(2 ½” to 24")
25mm to 50mm
SW SW/RF
(½" to 2")
FLANGES Class 600 A-182 Gr. F22 CL3 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm (2
AD3CB
½")
A-217 Gr. WC9
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-51
Temperature (º C) 549
15mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(½")
20mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(¾")
25mm (1") 80 (XS) 80 (XS) Class 3000 80 (XS) 80 (XS)
40mm
80 (XS) 80 (XS) Class 3000 80 (XS) 80 (XS)
(1 ½")
50mm (2") 80 (XS) 80 (XS) Class 3000 80 (XS) 80 (XS)
65mm
80 (XS) - - 80 (XS) 80 (XS)
(2 ½")
80mm (3") 80 (XS) - - 80 (XS) 80 (XS)
100mm
80 (XS) - - 80 (XS) 80 (XS)
(4")
150mm
80 (XS) - - 80 (XS) 80 (XS)
(6")
200mm
80 (XS) - - 80 (XS) 80 (XS)
(8")
250mm
60 (XS) - - 60 (XS) 60 (XS)
(10")
300mm
STD - - STD XS
(12")
350mm
30 (STD) - - 40 XS
(14")
400mm
40 (XS) - - 40 (XS) 40 (XS)
(16")
450mm
30 - - XS 40
(18")
500mm
30 (XS) - - 40 40
(20")
600mm
30 40 60
(24")
Design conditions for DB2f Piping Class correspond to of Pressure-Temperature values Rating Class 600
for group 1-10 materials, according to ASME B 16.34, Table 2-1.10)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-52
Temperature (º C) 510
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam straight buttwelded pipe. For other conditions see Sheet 2
of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
(½" to 2")
65mm to 150mm
40 (STD)
(2 ½” to 6")
200mm (8") 60
250mm (10") 60 (XS)
PIPES PE A-335 Gr. P22 ASME B36.10M
300mm to 350mm
XS
(12" to 14")
400mm to 600mm
60
(16" to 24")
22.23mm (0.875")
650mm (26")
WTH (1)
25mm to 50mm
Class 3000 SW/TH A-182 Gr. F22 CL3 ASME B16.11
(½" to 2")
FITTINGS
65mm to 650mm
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
(2 ½” to 26")
25mm to 50mm
SW SW/RF
(½" to 2")
ASME B16.5
FLANGES 65mm to 600mm Class 600 A-182 Gr. F22 CL3
WN/RF
(2 ½" to 24") BW
650mm (26") WN/RF ASME B16.47 Series
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm (2
AD3CB
½")
A-217 Gr. WC9
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-53
SYSTEMS: Steam
15mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(½")
20mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(¾")
25mm (1") 80 (XS) 160 Class 3000 80 (XS) 80 (XS)
40mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(1 ½")
50mm (2") 80 (XS) 160 Class 3000 80 (XS) 80 (XS)
65mm
40 (STD) - - 40 (STD) 40 (STD)
(2 ½")
80mm (3") 40 (STD) - - 40 (STD) 80 (XS)
100mm
40 (STD) - - 40 (STD) 80 (XS)
(4")
150mm
40 (STD) - - 80 (XS) 80 (XS)
(6")
200mm
60 - - 60 80 (XS)
(8")
250mm
60 (XS) - - 60 (XS) 60 (XS)
(10")
300mm
XS - - XS 80
(12")
350mm
XS - - 60 80
(14")
400mm
60 - - 60 80
(16")
450mm
60 - - 60 80
(18")
500mm
60 - - 60 80
(20")
600mm
60 60 80
(24")
650mm 22.23mm (0.875")
- - 23.83mm (0.938") WTH 26.97mm (1.063 WTH)
(26") WTH
Design conditions for DB2r Piping Class correspond to of Pressure-Temperature values Rating Class 900
for group 1-10 materials, according to ASME B 16.34, Table 2-1.10)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-54
Temperature (º C) 425
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: HRSG Drains and Vents (Flashing) straight buttwelded pipe. For other conditions see Sheet
2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
( ½" to 2")
65mm to 200mm
80 (XS)
(2 ½" to 8")
250mm (10") 40 (STD)
PIPES 300 mm (12") STD PE A-335 Gr. P11 ASME B36.10M
350mm (14") 40
400mm (16") 40 (XS)
450mm (18") XS
500mm to
600mm 40
(20" to 24")
15mm to 50mm Class 3000
SW/TH A-182 Gr. F11 CL2 ASME B16.11
( ½" to 2") (SW)
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP11 CL1 ASME B16.9
(2 ½" to 24")
15mm to 50mm
SW SW/RF
( ½" to 2")
FLANGES Class 600 A-182 Gr. F11 CL2 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-55
Temperature (º C) 425
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-56
Temperature (º C) 404
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Cold Reheat Steam. Auxiliary Steam. straight buttwelded pipe. For other conditions see Sheet
2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm to 50mm
80 (XS)
( ½" to 2")
65mm to 250mm
40 (STD)
(2 ½" to 10")
300 mm (12") STD
PIPES 350mm (14") 40 PE A-335 Gr. P11 ASME B36.10M
400mm (16") 40 (XS)
450mm (18") XS
500mm to
600mm 40
(20" to 24")
15mm to 50mm Class 3000
SW/TH A-182 Gr. F11 CL2 ASME B16.11
( ½" to 2") (SW)
FITTINGS
65mm to 600mm
Match to pipe BW A-234 Gr. WP11 CL1 ASME B16.9
(2 ½" to 24")
15mm to 50mm
SW SW/RF
( ½" to 2")
FLANGES Class 600 A-182 Gr. F11 CL2 ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
STUD BOLTS ALL - - A-193 Gr. B16 ASME B18.2.1
50mm (2")
A-182 Gr. F11
and AD2TS
CL2
smaller
65mm (2 ½")
and A-217 Gr. WC6
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-57
Temperature (º C) 404
NOTES NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-58
Temperature (º C) 558
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam & Drains. straight buttwelded pipe. For other conditions see Sheet 2
of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
PIPES 80 (XS) PE A-335 Gr. P22 ASME B36.10M
200mm (8")
250mm (10") to
100
600mm (24")
15mm (½") to
Class 3000 SW/TH A-182 Gr. F22 CL3 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
600mm (24")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 900 A-182 Gr. F22 CL3 ASME B16.5
65mm (2 ½”) to
BW WN/RF
600mm (24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
AE3CB
(2 ½")
A-217 Gr. WC9
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-59
Temperature (º C) 558
15mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(½")
20mm
80 (XS) 160 Class 3000 80 (XS) 160
(¾")
25mm (1") 80 (XS) 160 Class 3000 80 (XS) 80 (XS)
40mm
80 (XS) 160 Class 3000 80 (XS) 160
(1 ½")
50mm (2") 80 (XS) 160 Class 3000 80 (XS) 160
65mm
80 (XS) - - 80 (XS) 80 (XS)
(2 ½")
80mm (3") 80 (XS) - - 80 (XS) 160
100mm
80 (XS) - - 80 (XS) 120
(4")
150mm
80 (XS) - - 120 120
(6")
200mm
80 (XS) - - 100 120
(8")
250mm
100 - - 100 120
(10")
300mm
100 - - 100 120 (XXS)
(12")
350mm
100 - - 100 120
(14")
400mm
100 - - 100 120
(16")
450mm
100 - - 100 120
(18")
500mm
100 - - 100 120
(20")
600mm
100 - - 100 120
(24")
Design conditions for EB2f Piping Class correspond to lower values than Pressure-Temperature values Rating Class
900 for group 1-10 materials, according to ASME B 16.34, Table 2-1.10)
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") piping are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-60
Temperature (º C) 549
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Steam & Drains. straight buttwelded pipe. For other conditions see Sheet 2
of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½”) 40 (STD)
PIPES 80mm (3") to PE A-335 Gr. P22 ASME B36.10M
80 (XS)
200mm (8")
250mm (10") to
80
600mm (24")
15mm (½") to
Class 3000 SW/TH A-182 Gr. F22 CL3 ASME B16.11
50mm (2")
FITTINGS
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP22 CL1 ASME B16.9
600 (24")
15mm (½") to
SW SW/RF
50mm (2")
FLANGES Class 900 A-182 Gr. F22 CL3 ASME B16.5
65mm (2 ½”) to
BW WN/RF
600 (24")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B16 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
BRANCH ALL - -
See applicable section
CONNECTIONS
VALVES
65mm
AE3CB
(2 ½")
A-217 Gr. WC9
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-61
Temperature (º C) 549
15mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(½")
20mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(¾")
25mm (1") 80 (XS) 160 Class 3000 80 (XS) 80 (XS)
40mm
80 (XS) 160 Class 3000 80 (XS) 80 (XS)
(1 ½")
50mm (2") 80 (XS) 160 Class 3000 80 (XS) 160
65mm
40 (STD) - - 80 (XS) 80 (XS)
(2 ½")
80mm (3") 80 (XS) - - 80 (XS) 80 (XS)
100mm
80 (XS) - - 80 (XS) 120
(4")
150mm
80 (XS) - - 80 (XS) 120
(6")
200mm
80 (XS) - - 80 (XS) 100
(8")
250mm
80 - - 100 100
(10")
300mm
80 - - 100 100
(12")
350mm
80 - - 100 100
(14")
400mm
80 - - 100 100
(16")
450mm
80 - - 100 100
(18")
500mm
80 - - 100 100
(20")
600mm
80 - - 100 100
(24")
Design conditions for EB2r Piping Class correspond to lower values than Pressure-Temperature values Rating Class
900 for group 1-10 materials, according to ASME B 16.34, Table 2-1.10)
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") piping are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-62
Temperature (º C) 595
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Hot Reheat Steam (Flashing) straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½") to
80 (XS)
50mm (2")
65mm (2 ½") to
80 (XS)
200mm (8")
PIPES PE A-335 Gr. P91 ASME B36.10M
250mm (10") to
80
500mm (20")
ALL - -
NUTS A-194 Gr. 7 ASME B18.2.2
65mm
AF4CB
(2 ½")
A-217 Gr. C12A
and
larger
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-63
Temperature (º C) 595
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-64
Temperature (º C) 595
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm to 25mm
160
(½" to 1")
40mm to 50mm
XXS
(1 ½" to 2")
65mm to 150mm
(2 1/2" to 4")
XXS
65mm to 150mm
(2 1/2" to 4")
23.83mm (0.938")
150mm (6")
WTH
30.18mm (1.188")
200mm (8")
WTH
36.53mm (1.438")
PIPES 250mm (10") PE A-335 Gr. P91 ASME B36.10M
WTH
42.86mm (1.688")
300mm (12")
WTH
46.05mm (1.813")
350mm (14")
WTH
52.39mm (2.063")
400mm (16" )
WTH
58.74mm (2.313")
450mm (18" )
WTH
65.09mm (2.563")
500mm (20")
WTH
77.78mm (3.063")
600mm (24")
WTH
15mm to 25mm
Class 6000
(½" to 1")
SW A-182 Gr. F91 ASME B16.11
40mm to 50mm
FITTINGS Class 9000
(1 ½" to 2")
65mm to 600mm
Match to pipe BW A-234 Gr. WP91 ASME B16.9
(2 ½" to 24")
N/A
FLANGES N/A N/A - -
N/A
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-65
Temperature (º C) 595
SYSTEMS: HP Steam
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
(1) WTH is the nominal wall thickness tn.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-66
Temperature (º C) 593
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm (½") to
160
25mm (1")
40mm (1 ½") to
XXS
50mm (2")
65mm (2 ½”) to
XXS
100mm (4")
150 mm (6") XXS
28.58mm
200mm (8")
(1.125") WTH
34.93mm
250mm (10")
(1.375") WTH
PIPES 41.28mm PE A-335 Gr. P91 ASME B36.10M
300mm (12")
(1.625") WTH
44.45mm
350mm (14")
(1.750") WTH
52.39mm
400mm (16")
(2.000") WTH
55.58mm
450mm (18")
(2.188") WTH
61.93mm
500mm (20")
(2.438") WTH
74.63mm
600mm (24")
(2.938") WTH
15mm (½") to
Class 6000
25mm (1")
SW A-182 Gr. F91 ASME B16.11
40mm (1 ½") to
FITTINGS Class 9000
50mm (2")
65mm (2 ½”) to
Match to pipe BW A-234 Gr. WP91 ASME B16.9
600mm (24")
N/A
FLANGES N/A N/A - -
N/A
See Sheet 2 of 2
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-67
Temperature (º C) 593
SYSTEMS: HP Steam
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") piping are not included.
(1) WTH is the nominal wall thickness tn.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-68
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 15,9 13,4 12,1 11 10,3 9,65 8,618 7,58 6,55
65mm to
Match to pipe BW A-403 Gr.WP304L ASME B16.9
FITTINGS 600mm
50mm (2") and Manufacturer's
smaller standard
Roll Grooved A-403 Gr. WP304L Manufacturer's standard
65mm to 150mm Manufacturer's
(2 ½" to 6") standard
50mm (2") and
SW SW/RF
smalller
FLANGES Class 150 A-182 Gr. F304L ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-69
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 15,9 13,4 12,1 11,032 10,3 9,65 8,618 7,58 6,55
NPS ¼", 1 ¼", 3 ½", 5" and 22" are not included.
(1) Butterfly valves body shall be cast iron A-536 Gr. 60-40-18 with elastomeric liner
NOTES (2) Butterfly valves smaller than 18" shall be wafer or wafer lug
(3) Butterfly valves larger or equal to 18" shall be flanged.
(4) For natural gas pipes, spiral-wound gaskets shall be used in the flanged connections (ASME B
16.20-Table 9)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-70
Temperature (º C) 420
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Fuel gas system straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
50mm (2") and
10S
smaller A-312 Gr.TP304L
65mm to 200mm (seamless)
10S
PIPES (2 ½" to 8") PE ASME B36.19M
250mm to
A-312 Gr.TP304L
600mm 10S
(welded 100%RT)
(10" to 24")
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-71
Temperature (º C) 420
NPS ¼", 1 ¼", 3 ½", 5" and 22" are not included.
(1) Butterfly valves body shall be cast iron A-536 Gr. 60-40-18 with elastomeric liner
NOTES (2) Butterfly valves smaller than 18" shall be wafer or wafer lug
(3) Butterfly valves larger or equal to 18" shall be flanged.
(4) For natural gas pipes, spiral-wound gaskets shall be used in the flanged connections (ASME B
16.20-Table 9)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-72
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750 800 850
CONDITIONS Pressure (bar g) 15,9 13,4 12,1 11,0 10,3 9,7 8,6 7,6 7,6 5,5 4,5
Temperature (º C) -29 to 38 93 149 204 260 316 343 371 399 427 454
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: General Use straight welded pipe. For other conditions see Sheet 2
of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
50mm (2") and
10S
smaller A-312 Gr.TP316L
65mm to 200mm (seamless)
PIPES 10S PE ASME B36.19M
(2 ½" to 8")
250mm to 600mm A-312 Gr.TP316L
10S
(10" to 24") (welded 100%RT)
50mm (2") and
Class 3000 (SW) SW/TH A-182 Gr. F316L ASME B16.11
smalller
FITTINGS
65mm to 600mm
Match to pipe BW A-403 Gr.WP316L ASME B16.9
(2 ½" to 24")
500mm (2") and
SW SW/RF
smalller
FLANGES Class 150 A-182 Gr. F316L ASME B16.5
65mm to 600mm
BW WN/RF
(2 ½" to 24")
Non asbestos Flat ring gasket ASME
GASKETS ALL - -
compressed fiber B16.21, 1.6 mm thick (4)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-73
DESIGN Temperature (ºF) -20 to 100 200 300 400 500 600 650 700 750 800 850
CONDITIONS Pressure (bar g) 15,9 13,4 12,1 11,0 10,3 9,7 8,6 7,6 7,6 5,5 4,5
Temperature (ºC) -29 to 38 93 149 204 260 316 343 371 399 427 454
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
NOTES (1) Butterfly valves body shall be cast iron A-536 Gr. 60-40-18 with elastomeric liner
(2) Butterfly valves smaller than 450mm (18") shall be wafer or wafer lug
(3) Butterfly valves larger or equal to 450mm (18") shall be flanged.
(4) For natural gas pipes, spiral-wound gaskets shall be used in the flanged connections (ASME B 16.20-
Table 9)
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-74
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 41 35 31 29 27 26 25 25 24
BRANCH
ALL - - See applicable section
CONNECTIONS
VALVES
65mm
(2 ½") and A-351 Gr. CF8M
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-75
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 41 35 31 29 27 26 25 25 24
40mm
10S 40S Class 3000 10S 10S
(1 ½")
50mm (2") 10S 40S Class 3000 10S 10S
65mm
10S - - 10S 10S
(2 ½")
80mm (3") 10S - - 10S 10S
100mm
10S - - 10S 10S
(4")
150mm
40S - - 40S 40S
(6")
200mm
40S - - 40S 40S
(8")
250mm
40S - - 40S 40S
(10")
300mm
40S - - 40S 40S
(12")
350mm
40S - - 40S 40S
(14")
400mm
40S - - 40S 80S
(16")
450mm
40S - - 80S 80S
(18")
500mm
80S - - 80S 40
(20")
600mm
80S - - 30 40
(24")
Design conditions for BC1 Piping Class correspond to Pressure-Temperature Rating Class 300
for group 2-3 materials, according to ASME B 16.5, Table 2-2.3
NOTES
NPS ¼", 1 ¼", 3 ½", 5" and 22" are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-76
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 83 70 63 58 54 51 50 50 49
ALL - -
NUTS A-194 Gr. 8 ASME B18.2.2
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-77
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 650 700 750
CONDITIONS Pressure (bar g) 83 70 63 58 54 51 50 50 49
NOTES
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-78
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 700 800 900 1000 1100 1200
CONDITIONS Pressure (bar g) 99 86 77 71 66 62 60 58 57 50 42 26
Temperature (º C) -29 to 38 93 149 204 260 316 371 427 482 538 593 649
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: General use. straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL NOTES
RATING
15mm to 50mm
10S
(½" to 2")
65mm (2 ½") 10S A-312 Gr. TP316
80mm to 150mm (seamless) ASME B36.19M
PIPES 40S PE
(3" to 6")
200mm (8") 80S
A-312 Gr. TP316
250 mm (10") 80S
(welded 100% RT)
50mm (2") and Class 3000
SW/TH A-182 Gr. F316 ASME B16.11
smaller (SW)
FITTINGS
65mm to 200mm
Match to pipe BW A-403 Gr. WP316 ASME B16.9
(2 ½" to 8")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 600 A-182 Gr. F316 ASME B16.5
65mm to 200mm
BW WN/RF
(2 ½" to 8")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B8 CL2 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 8 ASME B18.2.2
BRANCH ALL - - See applicable
CONNECTIONS section
VALVES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-79
DESIGN Temperature (º F) -20 to 100 200 300 400 500 600 700 800 900 1000 1100 1200
CONDITIONS Pressure (bar g) 99 86 77 71 66 62 60 58 57 50 42 26
Temperature (º C) -29 to 38 93 149 204 260 316 371 427 482 538 593 649
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-80
Temperature (º C) 45
Data shown in Sheet 1 of 2 have been calculated for
SYSTEMS: Chemical dosing straight buttwelded pipe. For other conditions see
Sheet 2 of 2
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARD
RATING
15mm (½”) 10S
20mm to 25mm
40S
(3/4” to 1")
40mm to 50mm
80S
(1 1/2" to 2") A-312 Gr. TP304L ASME B36.19M /
PIPES PE
65mm (2 ½”) 80S (seamless) ASME B36.10M
80mm (3") 160
100mm (4") 120
150mm (6") 160
200mm (8") 140
15mm to 50mm
Class 3000 SW A-182 Gr. F304L ASME B16.11
(1 1/2" to 2")
FITTINGS
65mm to 200
Match to pipe BW A-403 Gr. WP304L ASME B16.9
mm (2 ½” to 8")
50mm (2") and
SW SW/RF
smaller
FLANGES Class 1500 A-182 Gr. F304L ASME B16.5
65mm to 200
BW WN/RF
mm (2 ½” to 8")
Spiral wound gasket with
GASKETS ALL - - 304 SS external centering ring
according to ASME B16.20
ALL - -
STUD BOLTS A-193 Gr. B8 CL2 ASME B18.2.1
ALL - -
NUTS A-194 Gr. 8 ASME B18.2.2
BRANCH ALL - - See applicable
CONNECTIONS section
VALVES
50mm (2")
and A-182 Gr. F316 AF5TS AF5PS AF5BF
smaller
65mm (2
½”)
-
and
larger
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-81
NPS 8mm (¼"), 32mm (1 ¼"), 90mm (3 ½"), 125mm (5") and 550mm (22") are not included.
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-82
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-83
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-84
SCHEDULE
ITEMS SIZE ENDS MATERIAL
RATING
10mm (3/8") OD
A-213 Gr. TP316
TUBES 15mm (1/2") OD 1.24mm (0.049") PE
(Seamless)
20mm (3/4") OD
10mm (3/8")
UNION Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2")
20mm (3/4")
10mm (3/8") x 8mm (1/4")
10mm (3/8") x 7.94mm (5/16")
REDUCING 15mm (1/2") x 8mm (1/4")
Ferrule mechanical grip ASTM A-182 Gr. F316
UNION 15mm (1/2") x 10mm (3/8")
20mm (3/4") x 10mm (3/8")
20mm (3/4") x 15mm (1/2")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
MALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
FEMALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 15mm (1/2")
REDUCERS 15mm (1/2") x NPT 10mm (3/8") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4") x NPT 15mm (1/2")
8mm (1/4")
CAPS 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4")
10mm (3/8") x NPS 15mm (1/2") - 300
FLANGES Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2") x NPS 15mm (1/2") - 150
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-85
VALVES
50mm (2")
and A-182 Gr. F316 AX5AF
smaller
65mm
(2 ½")
N/A
and
larger
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-86
Temperature (º C) 595
SCHEDULE
ITEMS SIZE ENDS MATERIAL
RATING
10mm (3/8") OD 1.65mm (0.065")
A-213 Gr. TP316
TUBES 15mm (1/2") OD 2.11mm (0.083") PE
(Seamless)
20mm (3/4") OD 2.77mm (0.109")
8mm (1/4")
10mm (3/8")
UNION Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2")
20mm (3/4")
10mm (3/8") x 8mm (1/4")
10mm (3/8") x 7.94mm (5/16")
REDUCING 15mm (1/2") x 8mm (1/4")
Ferrule mechanical grip ASTM A-182 Gr. F316
UNION 15mm (1/2") x 10mm (3/8")
20mm (3/4") x 10mm (3/8")
20mm (3/4") x 15mm (1/2")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
MALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
FEMALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 15mm (1/2")
REDUCERS 15mm (1/2") x NPT 10mm (3/8") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4") x NPT 15mm (1/2")
8mm (1/4")
CAPS 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4")
10mm (3/8") x NPS 15mm (1/2") - 300
FLANGES Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2") x NPS 15mm (1/2") - 150
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-87
VALVES
50mm (2")
and A-182 Gr. F316
smaller
65mm
(2 ½")
N/A
and
larger
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-88
Temperature (º C) 164
SCHEDULE
ITEMS SIZE ENDS MATERIAL
RATING
10mm (3/8") OD
1.65mm (0.065") A-213 Gr. TP316
TUBES 15mm (1/2") OD PE
(Seamless)
20mm (3/4") OD 2.77mm (0.109")
FITTINGS SIZE (OD) CONNECTION TYPE MATERIAL
10mm (3/8")
UNION Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2")
20mm (3/4")
10mm (3/8") x 8mm (1/4")
10mm (3/8") x 7.94mm (5/16")
REDUCING 15mm (1/2") x 8mm (1/4")
Ferrule mechanical grip ASTM A-182 Gr. F316
UNION 15mm (1/2") x 10mm (3/8")
20mm (3/4") x 10mm (3/8")
20mm (3/4") x 15mm (1/2")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
MALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
FEMALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 15mm (1/2")
REDUCERS 15mm (1/2") x NPT 10mm (3/8") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4") x NPT 15mm (1/2")
8mm (1/4")
CAPS 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4")
10mm (3/8") x NPS 15mm (1/2") - 300
FLANGES Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2") x NPS 15mm (1/2") - 150
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-89
VALVES
50mm (2")
and A-182 Gr. F316
smaller
65mm
(2 ½")
N/A
and
larger
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-90
Temperature (º C) 375
SCHEDULE
ITEMS SIZE ENDS MATERIAL
RATING
10mm (3/8") OD 1.65mm (0.065") A-213 Gr. TP316
TUBES PE
15mm (1/2") OD 2.11mm (0.083") (Seamless)
10mm (3/8")
UNION Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2")
20mm (3/4")
10mm (3/8") x 8mm (1/4")
10mm (3/8") x 7.94mm (5/16")
REDUCING 15mm (1/2") x 8mm (1/4")
Ferrule mechanical grip ASTM A-182 Gr. F316
UNION 15mm (1/2") x 10mm (3/8")
20mm (3/4") x 10mm (3/8")
20mm (3/4") x 15mm (1/2")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
MALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
FEMALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 15mm (1/2")
REDUCERS 15mm (1/2") x NPT 10mm (3/8") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4") x NPT 15mm (1/2")
8mm (1/4")
CAPS 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4")
10mm (3/8") x NPS 15mm (1/2") - 300
FLANGES Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2") x NPS 15mm (1/2") - 150
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-91
VALVES
50mm (2")
and A-182 Gr. F316
smaller
65mm
(2 ½")
N/A
and
larger
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-92
Temperature (º C) 365
SCHEDULE
ITEMS SIZE ENDS MATERIAL
RATING
10mm (3/8") OD
1.24mm (0.049") A-213 Gr. TP316
TUBES 15mm (1/2") OD PE
(Seamless)
20mm (3/4") OD 2.11mm (0.083")
FITTINGS SIZE (OD) CONNECTION TYPE MATERIAL
8mm (1/4")
10mm (3/8")
UNION Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2")
20mm (3/4")
10mm (3/8") x 8mm (1/4")
10mm (3/8") x 7.94mm (5/16")
REDUCING 15mm (1/2") x 8mm (1/4")
Ferrule mechanical grip ASTM A-182 Gr. F316
UNION 15mm (1/2") x 10mm (3/8")
20mm (3/4") x 10mm (3/8")
20mm (3/4") x 15mm (1/2")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
MALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 10mm (3/8")
10mm (3/8") x NPT 15mm (1/2")
15mm (1/2") x NPT 10mm (3/8")
FEMALE
15mm (1/2") x NPT 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
CONNECTORS
15mm (1/2") x NPT 20mm (3/4")
20mm (3/4") x NPT 15mm (1/2")
20mm (3/4") x NPT 20mm (3/4")
10mm (3/8") x NPT 15mm (1/2")
REDUCERS 15mm (1/2") x NPT 10mm (3/8") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4") x NPT 15mm (1/2")
8mm (1/4")
CAPS 15mm (1/2") Ferrule mechanical grip ASTM A-182 Gr. F316
20mm (3/4")
10mm (3/8") x NPS 15mm (1/2") - 300
FLANGES Ferrule mechanical grip ASTM A-182 Gr. F316
15mm (1/2") x NPS 15mm (1/2") - 150
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-93
VALVES
50mm (2")
and A-182 Gr. F316
smaller
65mm
(2 ½")
N/A
and
larger
NOTES
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-94
Temperature (º C) 20 30 40
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
RATING
15mm to 80mm
(½” to 3")
15mm to 80mm
SF
(½” to 3")
FITTINGS SDR 9 (4) PE-100 DIN 8075 / DIN 16963
100mm to 500mm
BF
(4" to 20")
15mm to 80mm PE-100
SF
(½” to 3") (Stub flange) (5) Dimensions shall match
FLANGES - ASME B16.5 Class 150,
100mm to 500mm ASTM A-105 RF
BF
(4" to 20") (Metallic backing ring)
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
50mm (2")
and ASTM A-105 AA1PF AA1BF
smaller
65mm to
AM6MW
400mm ASTM A-216
AA1CF AA1RF
(2½" Gr. WCB
(2)
to 16"
450mm AM6MF
ASTM A-216
(18") and AA1CF AA1RF
Gr. WCB (2)
higher
To protect against ultraviolet exposure damage, above ground plastic piping shall embody an
ultraviolet absorber.
The Supplier shall confirm the validity of the data of this sheet in the use of each specific pipe taking
account the location, the layout and requirements of the plastic piping specification.
(1) The stated data apply to water. Permissible component operating pressures shall be
determined by the Supplier.
NOTES (2) Butterfly valves are of cast iron body (A-536 Gr. 60-40-18) with elastomer liner
(3) Design conditions have been calculated using applicable total Security Factor (SF) of 1.6 (DIN
standard) and for a design life of 30 years
(4) For mitered fittings supplier shall define the appropiate SDR and/or reinforcement
(5) Stub flange thickness according to DIN 8074 (SDR 9)
(6) Flat gasket of 3 mm thickness 60-70 D Shore durometer
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-95
DESIGN Temperature (º F) 86
(1) (3)
CONDITIONS Pressure (bar g) 12
Temperature (º C) 30
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
RATING
½” to 3"
DIN 8074 / DIN 8075
PIPES SDR 9 PE PE 100
(7)
4" to 20"
½” to 3" SF
FITTINGS SDR 9 (4) PE-100 DIN 8075 / DIN 16963
4" to 20" BF
PE-100
½” to 3" SF
(Stub flange) (5) Dimensions shall match
FLANGES - ASME B16.5 Class 150,
ASTM A-105 RF
4" to 20" BF
(Metallic backing ring)
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
2"
and ASTM A-105 AA1PF AA1BF
smaller
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-96
Temperature (º C) 20 30 40 50 60 70 80
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
RATING
½” to 3"
4" to 20"
½” to 3" SF
FITTINGS SDR 7,4 PP-R DIN 8078 / DIN 16962
4" to 20" BF
PP-R
½” to 3" SF
(Stub flange) (4) Dimensions shall match
FLANGES - ASME B16.5 Class 150,
ASTM A-105 RF
4" to 20" BF
(Metallic backing ring)
Flat gasket to match
GASKETS (5) ALL - - EPDM ASME B16.5 Class 150
flange
STUD BOLTS ALL - - ASTM A-193 Gr. B7 ASME B18.2.1
Temperature (º C) 32 32 40 45 49 49 49
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
RATING
15mm to 80mm
(½” to 3")
PIPES SDR 11 PE PP-R DIN 8077 / DIN 8078
100mm to 800mm
(4" to 32")
15mm to 80mm
SF
(½” to 3")
FITTINGS SDR 11 (3) PP-R DIN 8078 / DIN 16962
100mm to 800mm
BF
(4" to 32")
15mm to 80mm
SF Dimensions shall match
(½” to 3") PP-R
ASME B16.5 Class 150,
100mm to 600mm (Stub flange) (4)
RF
FLANGES (4" to 24") -
BF A-182 Gr. F316 Dimensions shall match
650mm to 800mm
(Metallic backing ring) ASME B16.47 Class 150
(26" to 32")
Serie A, RF
25mm to 600mm Flat gasket to match
(1" to 24") ASME B16.5 Class 150
GASKETS (5) - - EPDM Flat gasket to match
650mm to 800mm
ASME B16.47 Class 150
(26" to 32")
Serie A
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
AM8BS
50mm (2") PP
AM8BF
and
smaller A-182 Gr. F316 AA5PF
65mm to
AM6MW
65mm
A-351 Gr.CF8M AA5RF
(2 ½" to
16") (6)
400mm AM6MF
(16") and A-351 Gr.CF8M AA5RF
higher (6)
To protect against ultraviolet exposure damage, above ground plastic piping shall embody an
ultraviolet absorber.
The Supplier shall confirm the validity of the data of this sheet in the use of each specific pipe taking
account the location, the layout and requirements of the plastic piping specification.
(1) The stated data apply to water. Permissible component operating pressures shall be
determined by the Supplier.
(2) Design conditions have been calculated using applicable total Security Factor (SF) of 1.5 (DIN
NOTES standard) and for a design life of 30 years
(3) For mitered fittings supplier shall define the appropiate SDR and/or reinforcement
(4) Stub flange thickness according to DIN 8077 (SDR 11)
(5) Flat gasket of 3 mm thickness 60-70 D Shore durometer
(6) Butterfly valves are of cast iron body (A-536 Gr. 60-40-18) with elastomer liner
(7) These pipes shall support vacuum conditions (-0,5 barg)
Temperature (º C) 10 20 30 40 50 65
QUALIFIED
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
PRESSURE (6)
Laminated
FITTINGS ¾" to 32" 29.5 GRP-UP ISO 14692
Union
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-99
QUALIFIED
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
PRESSURE (6)
25mm to
PIPES 1000mm 8.5 PE GRP-UP ISO 14692
(1" to 40")
25mm to
Laminated
FITTINGS 1000mm 8.5 GRP-UP ISO 14692
Union
(1" to 40")
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
50 mm (2")
ASTM A-182
and AA5PF AA5BF
Gr. F316
smaller
65mm to AL6MW
ASTM A-351
400mm (2 ½" AA5RF
Gr. CF8M `(4)
to 16"
450 mm (18") ASTM A-351 AL6MF
AA5RF
and higher Gr. CF8M `(4)
To protect against ultraviolet exposure damage, above ground plastic piping shall embody an
ultraviolet absorber.
The Supplier shall confirm the validity of the data of this sheet in the use of each specific pipe
taking account the location, the layout and requirements of the plastic piping specification.
(1) The stated data apply to water. Permissible component operating pressures shall be
determined by the Supplier.
(2) Stub flange thickness according to pipe thickness
(3) Flat gasket of 3 mm thickness 60-70 D Shore durometer
NOTES
(4) Butterfly valves are of cast iron body (A-536 Gr. 60-40-18) with elastomer liner
(5) These pipes shall support vacuum conditions (-0,5 barg). Supplier shall choose a correct piping
stiffness class
(6) Qualified pressure has been calculated using a design life of 30 years, f 3 =0,85 and
f2 =0,67.Qualified pressure, f2 and f3 values shall be confirmed by supplier.
(7) As reference, PN6 is applicable for this piping data sheet according to DIN 16867 / DIN 16964 / DIN
16965.
(8) Supplier of potable water piping shall provide NSF-61 certification.
DN (") 1 1 1/2 2 2 1/2 3 4 6 8 10 12 14 16 18 20 24 28 32 36 40
ID (mm) 25 40 50 65 80 100 150 200 250 300 350 400 450 500 600 700 800 900 1000
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-100
Temperature (º C) 49 32 40
QUALIFIED
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
PRESSURE (6)
25mm to 900mm
PIPES 13 PE GRP-UP ISO 14692
(1" to 36")
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
50mm (2")
ASTM A-182
and AA5PF AA5BF
Gr.F316
smaller
65mm to AL6MW
ASTM A-351 AA5RF
400mm (2 ½" AA5CF AA5TF AL6MF
Gr. CF8M
to 16" AA5HW `(4)
450 mm (18") ASTM A-351 AA5RF AL6MF
AA5CF
and higher Gr. CF8M AA5HW `(4)
To protect against ultraviolet exposure damage, above ground plastic piping shall embody an
ultraviolet absorber.
The Supplier shall confirm the validity of the data of this sheet in the use of each specific pipe
taking account the location, the layout and requirements of the plastic piping specification.
(1) The stated data apply to water. Permissible component operating pressures shall be
determined by the Supplier.
(2) Stub flange thickness according to pipe thickness
NOTES (3) Flat gasket of 3 mm thickness 60-70 D Shore durometer
(4) Butterfly valves are of cast iron body (A-536 Gr. 60-40-18) with elastomer liner
(5) These pipes shall support vacuum conditions (-0,5 barg). Supplier shall choose a correct piping
stiffness class
(6) Qualified pressure has been calculated using a design life of 30 years, f 3 =0,85 and
f2 =0,67.Qualified pressure, f2 and f3 values shall be confirmed by supplier.
(7) As reference, PN10 is applicable for this piping data sheet according to DIN 16867 / DIN 16964 /
DIN 16965.
Temperature (º C) 49 47 49
QUALIFIED
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
PRESSURE (6)
Laminated
FITTINGS ¾" to 32" 13 GRP-UP ISO 14692
Union
000220641.docx
This document contains proprietary information of Empresarios Agrupados internacional, S.A. and is subject to the restrictions set forth on the title page
Document No. MAZ-10-R-M-00403 Issue 3
Page A-102
Temperature (º C) 20 30 40 50
SCHEDULE
ITEMS SIZE ENDS MATERIAL DESIGN STANDARDS
RATING
40mm to 300mm
PIPES SDR 17 PE PVC-U DIN 8061 / DIN 8062
(½” to 12")
40mm to 300mm CJ
FITTINGS SDR 17 (3) PVC-U DIN 8063
(½” to 12") Solvent Cement
PVC-U
(Stub flange) (4) Dimensions shall match
40mm to 300mm CJ
FLANGES - ASME B16.5 Class 150,
(½” to 12") Solvent Cement
ASTM A-105 RF
(Metallic backing ring)
BRANCH
ALL - -
CONNECTIONS
VALVES
Type / Catalogue number
Size Material
Stop-
Gate Needle Globe Check Butterfly Ball Others
check
50mm (2")
and PVC
smaller
65mm PVC
(2 ½" to
A-216 Gr. WCB AA1BF
12")
To protect against ultraviolet exposure damage, above ground plastic piping shall embody an
ultraviolet absorber.
The Supplier shall confirm the validity of the data of this sheet in the use of each specific pipe
taking account the location, the layout and requirements of the plastic piping specification.
(1) The stated data apply to water. Permissible component operating pressures shall be
determined by the Supplier.
NOTES (2) Design conditions have been calculated using applicable total Security Factor (SF) of 2.5 (DIN
standard) and for a design life of 30 years
(3) For mitered fittings supplier shall define the appropiate SDR and/or reinforcement
(4) Stub flange thickness according to DIN 8061 (SDR 21)
(5) Flat gasket of 3 mm thickness 60-70 D Shore durometer