Cajero NT 7900

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 201

CONFIDENTIAL

AUTOMATIC PAYSTATION

NT-7900SERIES
Parameter Edition (Ver.4)
(MN-222717 -)
Important safety information
Precautions given in this manual are being categorized depending on the degree and content of
hazardousness. Do not fail to read these precautions carefully before using this product.

Warning : Warns possibilities of occurrences of fatal or serious physical injuries unless its content
is duly observed.

Caution : Cautions possibilities of occurrences of physical injuries or of material damages and


losses unless its content is duly observed.

· Serious physical injuries includes losing the eyesight, suffering a physical injury, suffering a burn
(high temperature or low temperature), receiving an electric shock, suffering a fracture and
poisoning, which are to leave after-effects or which require hospitalization or extensive
attendance to the hospital.
· Physical injuries include suffering a burn and receiving an electric shock although hospitalization
or extensive attendance to the hospital may not be necessary.
· Material damages and losses include damages and loses on houses, household belongings,
livestock and pets.

· Example of illustrative indications

Triangular framing stands for a warning or a caution.


Specific content is being illustratively represented inside the triangular frame.

Framing stands for a prohibition.


Specific content is being illustratively represented inside the circular frame.

The reversed circle framing stands for an indispensability.


Specific content is being illustratively represented inside the circular frame in reversed print.
Introduction
This Service Manual is for the technical staff of AMANO Corporation or technical staff who have equivalent
knowledge. This manual contains the information required to maintain AMANO equipment. Please ensure
you read this manual before repairing or inspecting the equipment.

Before performing maintenance on this equipment, please read and understand the following warnings and
cautions. Although there are no specific warnings and cautions for items described in this manual, the
following warnings and cautions written here relate to all aspects related to this equipment.

Warning
● Do not touch the power circuit breaker and switches of this equipment or of the power
source with wet hands.
Otherwise, you may receive an electric shock.

● Do not harm or damage the internal power cables.


Also, putting a heavy substance upon them, pulling them or bending them forcefully
damages the power cables possibly causing a fire accident or electrification.

● Do not use a fuse of excessive capacity than the specification, wire strips or aluminum
foils to replace an open fuse.
Always use a fuse of the specified capacity. Otherwise, fire accidents may occur.

● Do not disassemble other sections of the case or other covers of the equipment unless
what are instructed in the instruction manual.
The internal circuits include high potential sections and you may receive an electric shock.
Also, the internal structures include high temperature sections and you may suffer a burn.

● Do not remove the cover of terminal block.


High potential sections are covered underneath and you may get an electric shock if
removed.

● Do not modify this equipment.


Otherwise, fire accidents or electrification accidents may occur.

● When electric leakage occurs without grounding, fire accidents or electrification accidents
may occur. When grounding seems unworkable, contact the nearest AMANO dealer.

● If, by any chance, the equipment is hit by a vehicle or damaged by a mischievous deed,
turn off the power circuit breaker or power switch of this equipment or of the power
source before contacting your AMANO dealer.
Using the equipment as is may cause fire accidents or electrification accidents.

● When the equipment is found in an abnormal status such as smoke is coming out, it
smells queer or it is getting heated, turn off the power circuit breaker or power switch
of this equipment or of the power source, before contacting your AMANO dealer.
Using the equipment as is may cause fire accidents or electrification accidents.
Caution
● Do not touch the heater of this equipment.
Otherwise, you may suffer a burn.

● Be careful when working with the door open. The door may be closed suddenly due to
a gust of wind, and your hands may be caught in the door.

● Be careful when replacing paper, ribbon or stamp, or when removing clogging paper.
Your fingers, hair or scarf, etc. may be caught in the gear or belt of internal device such
as printer, resulting in injury.

● Do not insert your hand or fingers while the shutter is being activated.
Otherwise, you may get caught by your hand or fingers to suffer a physical injury.

● Do not touch the receipt cutter.


Otherwise injury may result.

● Do not use the service outlet with an excess power.


Otherwise fire may result.

● Always turn off the power circuit breaker before replacing a fuse.
Otherwise, you may receive an electric shock.

Attention
.

Cd Pb

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your AMANO product is designed and manufactured with high quality materials and components which can be
recycled and/or reused.

This symbol means that batteries and accumulators, at their end-of-life, should be disposed of separately from your
household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or
accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Cd: cadmium (0.002%), Pb: lead (0.004%)

In the European Union there are separate collection systems for used batteries and accumulators.

Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!


NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Table of Contents
1. Specific Parameter........................................................................................................1

1-1. Terminal Specific Parameter .............................................................................................................. 1


1-2. Equipment Adjustment Data .............................................................................................................. 1
1-3. User Parameter.................................................................................................................................. 2
1-4. Data Sequential Number.................................................................................................................... 2
1-5. Function Count................................................................................................................................... 2
1-6. Credit Card Host Setting .................................................................................................................... 2
1-7. Receipt Logo Data ............................................................................................................................. 2
1-8. Receipt Header / Footer .................................................................................................................... 3
1-9. Invalid Ticket Table............................................................................................................................. 3
1-10. Re-issued Ticket Table....................................................................................................................... 3
1-11. Pass Card Table (Anti Pass Back, Invalid Card) ............................................................................... 3
1-12. Ticket Number Setting (Valid in case of Master Terminal) (Unused) ................................................. 3
1-13. Ticket Issue Request Table (Valid in case of Master Terminal) (Unused) ......................................... 4
1-14. Cancelled Pass Card Payment Table (20 data)................................................................................. 4
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2. Common Parameter .....................................................................................................5

2-1. Terminal Specific Parameter .............................................................................................................. 5


2-2. Special Day Setting............................................................................................................................ 6
2-3. Number of Vehicles Setting ............................................................................................................... 7
2-4. Communication Setting...................................................................................................................... 7
2-5. Rate Setting ....................................................................................................................................... 8
2-6. Parking Ticket Setting ...................................................................................................................... 12
2-7. Pass Card Setting ............................................................................................................................ 13
2-8. JIS Pass Card Setting (Not Available) ............................................................................................. 28
2-9. Discount Setting............................................................................................................................... 28
2-10. Service Ticket Setting ...................................................................................................................... 29
2-11. Store Discount Setting ..................................................................................................................... 30
2-12. Multi-store Discount Setting............................................................................................................. 35
2-13. Discount Ticket Setting (Not Available)............................................................................................ 36
2-14. Point Card (Not Available)................................................................................................................ 36
2-15. Prepaid Card.................................................................................................................................... 36
2-16. Coupon Ticket .................................................................................................................................. 36
2-17. Unused............................................................................................................................................. 36
2-18. Total Setting ..................................................................................................................................... 37
2-19. Total Print Setting............................................................................................................................. 39
2-20. Category Totals Setting (Important: Take Total Print before Change the Setting) ........................... 41
2-21. Receipt Print Setting ........................................................................................................................ 43
2-22. Printing Related Settings ................................................................................................................. 46
2-23. Paystation Specific Settings............................................................................................................. 47
2-24. Denomination Settings..................................................................................................................... 49
2-25. Money Management Settings .......................................................................................................... 50
2-26. Output Signal Setting ....................................................................................................................... 52
2-27. Input Signal Setting.......................................................................................................................... 53
2-28. Management Screen Setting ........................................................................................................... 54
2-29. Paystation Display Settings ............................................................................................................. 58
2-30. Paystation Voice Announcement Setting ......................................................................................... 61
2-31. Information Record Settings ............................................................................................................ 75
2-32. Password Settings ........................................................................................................................... 76
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3. Fee Setting .................................................................................................................81

3-1. Fee Calculation Basic Setting.......................................................................................................... 81


3-2. Day Night Zone Fee Calculation Setting.......................................................................................... 83
3-2-1. Day Night Zone 1st Rate System ................................................................................................ 83
3-2-2. Day Night Zone 2nd Rate System............................................................................................... 88
3-2-3. Day Night Zone 3rd Rate System................................................................................................ 93
3-2-4. Day night Zone Pass Card 9-15 Start Time / End Time .............................................................. 98
3-3. Regressive Zone Fee Calculation Setting ....................................................................................... 99
3-3-1. Regressive Zone 1st Rate System.............................................................................................. 99
3-3-2. Regressive zone 2nd rate system ............................................................................................. 104
3-3-3. Regressive Zone 3rd Rate System ........................................................................................... 109
3-3-4. Regressive Zone Pass Card 9-15 Start Time / End Time...........................................................114

4. Other Extended Function Setting.............................................................................. 115

4-1. Denomination Setting (2) ................................................................................................................115


4-2. Credit Card Setting .........................................................................................................................116
4-3. Mifare Setting..................................................................................................................................117
4-4. NT7900 Specific Parameter............................................................................................................118
4-5. Custom Setting for Specific Country (Standard) ............................................................................ 124
4-5-1. AKC ........................................................................................................................................... 124
4-5-2. AE .............................................................................................................................................. 126
4-5-3. Taiwan ....................................................................................................................................... 129
4-6. Online Server Connectivity Setting ................................................................................................ 130
4-7. Invalid Management Card Registration ......................................................................................... 132
4-8. Custom Setting for Specific Country (Custom-order) .................................................................... 133
4-9. Passcard Renewal Period Selection.............................................................................................. 143
4-10. Nesting Setting............................................................................................................................... 147
4-10-1. Nesting Basic Setting ............................................................................................................. 147
4-10-2. Nesting Area Pattern Setting .................................................................................................. 159
4-11. Currency Setting (related to 41-0002) ........................................................................................... 162
4-12. Banknote Type Table (related to 41-0014 - 41-0017) .................................................................... 164
4-13. Coin Point Table (related to 24-0001 - 24-0026) ........................................................................... 165
4-14. Voice Announcement Logic for the Fee (related to 41-0003) ........................................................ 166
4-15. Parameter List that Reboot or Initialize 2 is required..................................................................... 167

5. Parameter Explanation .............................................................................................170

5-1. Specific Parameter......................................................................................................................... 170


5-2. Common Parameter....................................................................................................................... 171
5-3. Fee Setting..................................................................................................................................... 184
5-4. Other Extended Function Setting................................................................................................... 191
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

1. Specific Parameter
[ Note 1 ]
The column “77” in the table shows the difference with NT7700 (Japanese domestic model).
[ X ]: Eliminated or reduced the function on NT7900.
[ add ]: Added the function on NT7900.
[ Note 2 ]
The column “79” in the table shows the alternative parameter address in TF7900 (standard version).

1-1. Terminal Specific Parameter


Address Item Setting Range Default 77 79
01-0001 Terminal no. (valid in case of slave 1-50= terminal No. 1-50 / 0= Not used (certainly necessary in case of 0
terminal) slave terminal)
01-0002 Machine no. 0= Not print / 1-98= machine no. 0 3
01-0003 Model 30= slave terminal 30 11
40= master terminal
01-0004 CPS / EPS 0= CPS / 1= EPS (ticket swallow) 0/1
01-0005 Loop control 0= No loop / 1= Start signal / 2= Double loop control 0/2
01-0006 Right/Left exclusive control 0= No / 1= Exclusive control (invalid when 01-0005=0) 0
01-0007 Flat Rate function 0= Not use / 1= Payment at Entry / 2= Payment at Exit 0
01-0008 0
01-0009 0
01-0010 0
01-0011 0
01-0012 Unused 0 fixed 0

1-2. Equipment Adjustment Data


Address Item Setting Range Default 77 79
02-0001 Unused 0 fixed 0
02-0002 Maintenance panel contrast (not used) 52
02-0003 Panel backlight adjustment 40-160 120
02-0004 Voice announcement volume 1 0-8 2
02-0005 Voice announcement volume 2 0-8 2
02-0006 Door alarm volume 0-8 7
02-0007 Receipt printer darkness 0-255 127
02-0008 Journal printer darkness 0-255 127
02-0009 0
02-0010 0
02-0011 Feed cut location 0-255 98
02-0012 Reserve 0
02-0013 Left Drive Sensor Level 0-7 0
02-0014 Stop Sensor Level 0-7 0
02-0015 Front/Back Sensor Level 0-7 0
02-0016 No Ticket Sensor Gain 0-3 3
02-0017 No Ticket Sensor Level 0-7 7
02-0018 Front/Back Read Gain 0-3 3
02-0019 Front/Back Read Level 0-7 1
02-0020 Right Drive Sensor Level 0-7 0
02-0021 Stop Sensor Level 0-7 0
02-0022 Front/Back Sensor Level 0-7 0
02-0023 No Ticket Sensor Gain 0-3 3
02-0024 No Ticket Sensor Level 0-7 7
02-0025 Front/Back Read Gain 0-3 3
02-0026 Front/Back Read Level 0-7 1
02-0027 Senser Level Status Bit setting. 0
b0 : LM (Left Move Sensor) Dark Level Error
b1 : RM (Right Move Sensor) Dark Level Error
b2 : LS (Left Stop Sensor) Dark Level Error
b3 : RS (Right Stop Sensor) Dark Level Error
b4 : LC (Left Front/Back Sensor) Dark Level Error
b5 : RC (Right Front/Back Sensor) Dark Level Error
b6 : LC (Left Front/Back Sensor) Light Level Error
b7 : RC (Right Front/Back Sensor) Light Level Error
02-0028 Ticket Feeding 0= Start feeding from left (front) slot 0
1= Start feeding from right (back) slot
02-0029 Ticket b0 : 0= No ticket on left (front) slot / 1= Ticket on right (front) slot 0
b0 : 1= No ticket on right (front) slot / 1= Ticket on left (front) slot
02-0030 Reserve 0

-1-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

1-3. User Parameter


Address Item Setting Range Default 77 79
1 Shutter mode 0= Automatic / 1= Keep opening 0
2 In operation / out of service 0= Automatic / 1= Forced out of service / 2= Forced in operation 0
3 Forced space control mode 1 0= Automatic / 1= Forced lot full / 2= Forced lot available 0
4 Forced space control mode 2 0= Automatic / 1= Forced lot full / 2= Forced lot available 0
5 Number of vehicles 1 0-9999 0
6 Number of vehicles 2 0-9999 0
7 Lot full amount 1 0-9999 100
8 Lot full release number of vehicles 1 0-9999 98
9 Lot full amount 2 0-9999 100
10 Lot full release number of vehicles 2 0-9999 98
11 Gate release mode (last operation is 0: Gate open 2: Gate close 0
kept) 1: Release by gate release button (close by gate close)
12 Payment mode 0= Automatic / 1= Semi-automatic / 2= Manual / 3= No payment 0
13 Forced anti pass back mode 0= Automatic / 1= Forced anti pass back OFF 0
14 Image (reserved) 0
15 Reserved 0

91 Reserved 0
92 Taiwan Uniform Invoice Receipt 0-99999999 0
number (upper)
93 Taiwan Uniform Invoice Receipt 0-99999999 0
number (lower)
94 Taiwan Uniform Invoice Receipt 0-2525 0
character (upper)
95 Taiwan Uniform Invoice Receipt 0-2525 0
character (lower)
96 Previous total date Year month date 1
97 Unused 0 fixed 0
98 Transportation card slip number / 1-99999 1
Proton payment number
99 Credit card slip number 1-99999 1

1-4. Data Sequential Number


Address Item Setting Range Default 77 79
1 Total sequential number 1-999999 1
2 Payment sequential number 1
3 Cancelled payment sequential number 1
4 Claim check sequential number 1
5 T total sequential number 1
6 GT total sequential number 1
7 Multiple T total sequential number 1
8 Hopper total sequential number 1
9 Banknote dispenser sequential number 1
10 Coin safe total sequential number 1
11 Note safe total sequential number 1
12 Lost ticket issue sequential number 1-99999 0
13
14
15
16

1-5. Function Count


Address Item Setting Range Default 77 79

1-6. Credit Card Host Setting


Address Item Setting Range Default 77 79
1 Credit card server name (IP address or
server name)
2 Connection port no.

1-7. Receipt Logo Data


Address Item Setting Range Default 77 79
1 Receipt logo bitmap data

-2-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

1-8. Receipt Header / Footer


Address Item Setting Range Default 77 79
1 Header 1st line text data
2 Header 2nd line text data
3 Header 3rd line text data
4 Header 4th line text data
5 Footer 1st line text data
6 Footer 2nd line text data
7 Footer 3rd line text data
8 Footer 4th line text data

1-9. Invalid Ticket Table


Address Item Setting Range Default 77 79
1 Invalid ticket data 1 Machine no., Ticket no., Entry date and time
2 Invalid ticket data 2

30 Invalid ticket data 30

1-10. Re-issued Ticket Table


Address Item Setting Range Default 77 79
1 Re-issued ticket data 1 Re-issue no., Machine no., Fee rate, Ticket no., Entry date and time,
2 Re-issued ticket data 2 Store no.

20 Re-issued ticket data 20

1-11. Pass Card Table (Anti Pass Back, Invalid Card)


Address Item Setting Range Default 77 79
1 Basic pass card 1 0= initial state (possible to enter/exit) 0
2 Basic pass card 2 1= exited (possible to enter) 0
2= entered (possible to exit)
4000 Basic pass card 4000 3= invalid (impossible to enter/exit) 0
4001 Extended pass card 1 0
4002 Extended pass card 2 0

8000 Extended pass card 4000 0


Note : If extended 1 pass card or extended 2 pass card is used, this table is referred in both case. So same pass card number is not allowed
on extended 1 pass card and extended 2 pass card.

1-12. Ticket Number Setting (Valid in case of Master Terminal)


(Unused)
Address Item Setting Range Default 77 79
1 The latest ticket no. for machine no.1 1-99999 0
ticket dispenser
2 The latest ticket no. for machine no.2 0
ticket dispenser

20 The latest ticket no. for machine no.20 0


ticket dispenser

-3-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

1-13. Ticket Issue Request Table (Valid in case of Master


Terminal) (Unused)
Address Item Setting Range Default 77 79
1 No. of ticket dispenser which allowed to 0-20
issue ticket
2 Machine no. of ticket issue request 1 1-20= machine no. / 0= no 0
send
3 Machine no. of ticket issue request 2 0
send

21 Machine no. of ticket issue request 20 0


send

1-14. Cancelled Pass Card Payment Table (20 data)


Address Item Setting Range Default 77 79
1 Cancelled pass card payment data 1 Pass card lot no. pass card classification, pass card no. entry date and
time, discount information
2 Cancelled pass card payment data 2
3 Cancelled pass card payment data 3

20 Cancelled pass card payment data 20

-4-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2. Common Parameter
2-1. Terminal Specific Parameter
Address Item Setting Range Default 77 79
01-0001 Parking lot No. 1-99 20 X 1
01-0002 Extension ID (extended parking lot No.) 1-99 / 0= unused (Parking Ticket and Lost Ticket are not 0 X 2
supported.)
01-0003 Extended 2 ID (extended 2 parking lot No.) 1-99 / 0= unused (Parking Ticket and Lost Ticket are not 0 X
supported)
01-0004 System configuration 0 fixed 0 X
01-0005 Discount data which is not transferred to 0= Accept 0 X
the host PC
01-0006 Conditions for accepting the rate change 0= Not accept after time discount or % discount 0
discount 1= In case of the re-payment, the rate change will not be accepted if
the time discount or % discount was applied when the payment
was cancelled.
2= Always accept. (discount will be applied.)
01-0007 ID card reading 0= Money management card and sub total card only 2
1= Money management card, sub total card, and inventory card
only
2= All cards
01-0008 Extension Card accepting <1st digit> Pass Card renewal 0
<2nd digit> Debit Card sale/recharge
0=No / 1=Yes
01-0009 Extended Parking Lot No. 1-99 / 0= unused (Parking Ticket and Lost Ticket are supported.) 0
for Parking Ticket * It is handled as basic lot number ticket in Receipt, T Total,
01-0010 Extended 2 Parking Lot No. Communication Data, etc. 0
for Parking Ticket
01-0011 Sequential number 0= Individual sequential number 1 9
1= Consecutive sequential number
2= No sequential number
01-0012 Machine No. of the slave terminal 1 1 - 99= Slave terminal machine No. 1 12
01-0013 Machine No. of the slave terminal 2 0= Not connected 0 12
01-0014 Machine No. of the slave terminal 3 (Valid only for master terminal) 0 13
01-0015 Machine No. of the slave terminal 4 0 13
01-0016 Machine No. of the slave terminal 5 0 14
01-0017 Machine No. of the slave terminal 6 0 14
01-0018 Machine No. of the slave terminal 7 0 15
01-0019 Handling of transaction data 0= Stops during communication data buffer FULL. 2 16
(Valid only for slave terminal. In case of 1= Not stop when communication data buffer FULL (new data is
the master terminal, this parameter has to omitted).
be 2 fixed.) 2= Not stop when communication data buffer FULL (old data is
omitted).
01-0020 Clock synchronization process (valid only 0= No 0 22
for master terminal) 1= Yes (at 1:05 AM)
01-0021 Clock data receiving by APS 0= Yes 0
communication 1= No
01-0022 Communication data (payment data/total <1st digit> 0=DB / 1=SRAM / 2= SRAM + text 0
data) save (valid only for slave terminal) <2nd digit> No. of text data
(Remark)
“2nd digit” setting is available when “1st digit” is 2
0-9=1000-10000 record (payment data)
60-600 record (total data)
(Setting Example)
02: to send 1000 record (payment data)
60 record (total data)
92: to send 10000 record (payment data)
600 record (total data)
01-0023 Communication check wait timer (valid 7 fixed 7 X
only for slave terminal)

-5-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-2. Special Day Setting


Address Item Setting Range Default 77 79
02-0001 Special period 1start month [Month] 1 - 12= January to December 0
02-0002 Date [Date] 1 - 31= 1st to 31st 0
02-0003 End month 0
02-0004 Date (Special period has a higher priority than special day.) 0
02-0005 Special period 2 Start month 0
02-0006 Date 0
02-0007 End month 0
02-0008 Date 0
02-0009 Special period 3 start month 0
02-0010 Date 0
02-0011 End month 0
02-0012 Date 0
02-0013 Special day 1 month [Month] 1 - 12= - January to December 0
02-0014 Date [Date] 1 - 31= 1st to 31st 0
02-0015 Special day 2 month 0
02-0016 Date 0
02-0017 Special day 3 month 0
02-0018 Date 0
02-0019 Special day 4 month 0
02-0020 Date 0
02-0021 Special day 5 month 0
02-0022 Date 0
02-0023 Special day 6 month 0
02-0024 Date 0
02-0025 Special day 7 month 0
02-0026 Date 0
02-0027 Special day 8 month 0
02-0028 Date 0
02-0029 Special day 9 month 0
02-0030 Date 0
02-0031 Special day 10 month 0
02-0032 Date 0
02-0033 Special day 11 month 0
02-0034 Date 0
02-0035 Special day 12 month 0
02-0036 Date 0
02-0037 Special day 13 month 0
02-0038 Date 0
02-0039 Special day 14 month 0
02-0040 Date 0
02-0041 Special day 15 month 0
02-0042 Date 0
02-0043 Special day 16 month 0
02-0044 Date 0
02-0045 Special day 17 month 0
02-0046 Date 0
02-0047 Special day 18 month 0
02-0048 Date 0
02-0049 Special day 19 month 0
02-0050 Date 0
02-0051 Special day 20 month 0
02-0052 Date 0
02-0053 Special day 21 month 0
02-0054 Date 0
02-0055 Special day 22 month 0
02-0056 Date 0
02-0057 Special day 23 month 0
02-0058 Date 0
02-0059 Special day 24 month 0
02-0060 Date 0
02-0061 Special day 25 month 0
02-0062 Date 0

02-0071 Special day 30 month 0


02-0072 Date 0
02-0073 Special day 31 month 0
02-0074 Date 0

-6-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-3. Number of Vehicles Setting


Address Item Setting Range Default 77 79
03-0001 Unused 0
03-0002 Lot full amount change method 0= No space control 0
1= change the lot full amount and release amount on day of week
basis
2= change the lot full amount and release amount on time zone
basis
3= change the current amount on the rate basis
(For method 0, 1, 2, lot full signal is generated on output signal 1.)
(In case of method 3, parking lot is controlled by IN/OUT signal.)
03-0003 In case of method 1, Monday 0= Apply lot full amount 1 and lot full release amount 1. 0
03-0004 Tuesday 1= Apply lot full amount 2 and lot full release amount 2. 0
03-0005 Wednesday 0
03-0006 Thursday (Valid when 03-0002=1.) 0
03-0007 Friday 0
03-0008 Saturday 0
03-0009 Sunday 0
03-0010 Special day 0
03-0011 Special period 1 0
03-0012 Special period 2 0
03-0013 Special period 1 0
03-0014 In case of method 2, 0000-2359 = 0:00 to 23:59 0
number of vehicles 1start time. (Valid when 03-0002= 2.)
03-0015 number of vehicles 1 end time 0

2-4. Communication Setting


Address Item Setting Range Default 77 79
04-0001 Baud rate 0= 1200bps / 1= 2400bps / 2= 4800bps / 3= 9600bps / 3
4= 19200bps / 5= 38400bps
04-0002 Bit length 0=7bit / 1=8bit 0
04-0003 Vertical parity 0= None / 1= Odd / 2= Even 2
04-0004 Wait timer before transmission 0= Automatic 1-255= 1-255ms 20
04-0005 Simulation mode (for communication 0-255 0
module diagnostics)
04-0006 Restart timer after receiving program data 0= 30 sec / 1-99= 1-99 sec 0

-7-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-5. Rate Setting


Address Item Setting Range Default 77 79
05-0001 A rate usage 0= No / 1= Yes 1 80
05-0002 Discount time 0 - 9959= discount time 0:00-99:59 0 80
05-0003 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0004 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 1
current no. of vehicle 2
05-0005 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 92
05-0006 Rate system on Tuesday 0 92
05-0007 Rate system on Wednesday 0 92
05-0008 Rate system on Thursday 0 92
05-0009 Rate system on Friday 0 93
05-0010 Rate system on Saturday 0 93
05-0011 Rate system on Sunday 0 93
05-0012 Rate system of Special date 0 93
05-0013 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0014 Rate system of Special period 2 0
05-0015 Rate system of Special period 3 0
05-0016 B rate usage 0= No / 1= Yes 0 81
05-0017 Discount time 0 - 9959= discount time 0:00-99:59 0 81
05-0018 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0019 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0020 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 94
05-0021 Rate system on Tuesday 0 94
05-0022 Rate system on Wednesday 0 94
05-0023 Rate system on Thursday 0 94
05-0024 Rate system on Friday 0 95
05-0025 Rate system on Saturday 0 95
05-0026 Rate system on Sunday 0 95
05-0027 Rate system of Special date 0 95
05-0028 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0029 Rate system of Special period 2 0
05-0030 Rate system of Special period 3 0
05-0031 C rate usage 0= No / 1= Yes 0 82
05-0032 Discount time 0 - 9959= discount time 0:00-99:59 0 82
05-0033 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0034 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0035 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 96
05-0036 Rate system on Tuesday 0 96
05-0037 Rate system on Wednesday 0 96
05-0038 Rate system on Thursday 0 96
05-0039 Rate system on Friday 0 97
05-0040 Rate system on Saturday 0 97
05-0041 Rate system on Sunday 0 97
05-0042 Rate system of Special date 0 97
05-0043 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0044 Rate system of Special period 2 0
05-0045 Rate system of Special period 3 0

-8-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


05-0046 D rate usage 0= No / 1= Yes 0 83
05-0047 Discount time 0 - 9959= discount time 0:00-99:59 0 83
05-0048 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0049 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0050 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 98
05-0051 Rate system on Tuesday 0 98
05-0052 Rate system on Wednesday 0 98
05-0053 Rate system on Thursday 0 98
05-0054 Rate system on Friday 0 99
05-0055 Rate system on Saturday 0 99
05-0056 Rate system on Sunday 0 99
05-0057 Rate system of Special date 0 99
05-0058 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0059 Rate system of Special period 2 0
05-0060 Rate system of Special period 3 0
05-0061 E rate usage 0= No / 1= Yes 0 84
05-0062 Discount time 0 - 9959= discount time 0:00-99:59 0 84
05-0063 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0064 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0065 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 100
05-0066 Rate system on Tuesday 0 100
05-0067 Rate system on Wednesday 0 100
05-0068 Rate system on Thursday 0 100
05-0069 Rate system on Friday 0 101
05-0070 Rate system on Saturday 0 101
05-0071 Rate system on Sunday 0 101
05-0072 Rate system of Special date 0 101
05-0073 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0074 Rate system of Special period 2 0
05-0075 Rate system of Special period 3 0
05-0076 F rate usage 0= No / 1= Yes 0 85
05-0077 Discount time 0 - 9959= discount time 0:00-99:59 0 85
05-0078 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0079 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0080 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 102
05-0081 Rate system on Tuesday 0 102
05-0082 Rate system on Wednesday 0 102
05-0083 Rate system on Thursday 0 102
05-0084 Rate system on Friday 0 103
05-0085 Rate system on Saturday 0 103
05-0086 Rate system on Sunday 0 103
05-0087 Rate system of Special date 0 103
05-0088 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0089 Rate system of Special period 2 0
05-0090 Rate system of Special period 3 0

-9-
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


05-0091 G rate usage 0= No / 1= Yes 0 86
05-0092 Discount time 0 - 9959= discount time 0:00-99:59 0 86
05-0093 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0094 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0095 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 104
05-0096 Rate system on Tuesday 0 104
05-0097 Rate system on Wednesday 0 104
05-0098 Rate system on Thursday 0 104
05-0099 Rate system on Friday 0 105
05-0100 Rate system on Saturday 0 105
05-0101 Rate system on Sunday 0 105
05-0102 Rate system of Special date 0 105
05-0103 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0104 Rate system of Special period 2 0
05-0105 Rate system of Special period 3 0
05-0106 H rate usage 0= No / 1= Yes 0 87
05-0107 Discount time 0 - 9959= discount time 0:00-99:59 0 87
05-0108 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0109 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0110 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 106
05-0111 Rate system on Tuesday 0 106
05-0112 Rate system on Wednesday 0 106
05-0113 Rate system on Thursday 0 106
05-0114 Rate system on Friday 0 107
05-0115 Rate system on Saturday 0 107
05-0116 Rate system on Sunday 0 107
05-0117 Rate system of Special date 0 107
05-0118 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0119 Rate system of Special period 2 0
05-0120 Rate system of Special period 3 0
05-0121 I rate usage 0= No / 1= Yes 0 88
05-0122 Discount time 0 - 9959= discount time 0:00-99:59 0 88
05-0123 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0124 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0125 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 108
05-0126 Rate system on Tuesday 0 108
05-0127 Rate system on Wednesday 0 108
05-0128 Rate system on Thursday 0 108
05-0129 Rate system on Friday 0 109
05-0130 Rate system on Saturday 0 109
05-0131 Rate system on Sunday 0 109
05-0132 Rate system of Special date 0 109
05-0133 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0134 Rate system of Special period 2 0
05-0135 Rate system of Special period 3 0

- 10 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 79


05-0136 J rate usage 0= No / 1= Yes 0 89
05-0137 Discount time 0 - 9959= discount time 0:00-99:59 0 89
05-0138 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0139 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0140 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 110
05-0141 Rate system on Tuesday 0 110
05-0142 Rate system on Wednesday 0 110
05-0143 Rate system on Thursday 0 110
05-0144 Rate system on Friday 0 111
05-0145 Rate system on Saturday 0 111
05-0146 Rate system on Sunday 0 111
05-0147 Rate system of Special date 0 111
05-0148 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0149 Rate system of Special period 2 0
05-0150 Rate system of Special period 3 0
05-0151 K rate usage 0= No / 1= Yes 0 90
05-0152 Discount time 0 - 9959= discount time 0:00-99:59 0 90
05-0153 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0154 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0155 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 112
05-0156 Rate system on Tuesday 0 112
05-0157 Rate system on Wednesday 0 112
05-0158 Rate system on Thursday 0 112
05-0159 Rate system on Friday 0 113
05-0160 Rate system on Saturday 0 113
05-0161 Rate system on Sunday 0 113
05-0162 Rate system of Special date 0 113
05-0163 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0164 Rate system of Special period 2 0
05-0165 Rate system of Special period 3 0
05-0166 L rate usage 0= No / 1= Yes 0 91
05-0167 Discount time 0 - 9959= discount time 0:00-99:59 0 91
05-0168 Payment (Exit) completed signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
output completed signal 2 / 2= signal 1 and 2 both / 3= Not output
05-0169 Current number of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
05-0170 Rate system on Monday 1 - 3= 1st - 3rd rate system / 0= 1st rate system 0 114
05-0171 Rate system on Tuesday 0 114
05-0172 Rate system on Wednesday 0 114
05-0173 Rate system on Thursday 0 114
05-0174 Rate system on Friday 0 115
05-0175 Rate system on Saturday 0 115
05-0176 Rate system on Sunday 0 115
05-0177 Rate system of Special date 0 115
05-0178 Rate system of Special period 1 (Special period has a higher priority than special date.) 0
05-0179 Rate system of Special period 2 0
05-0180 Rate system of Special period 3 0

- 11 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-6. Parking Ticket Setting


Address Item Setting Range Default 77 79
06-0001 Paid ticket print 0= No 1
1= Yes (machine # + fee rate + amount + paid time)
2= Yes (machine # + fee rate + amount + paid time + time exit by)
06-0002 Invalid parking ticket check 0= No / 1= Yes 1 7
06-0003 “n” min. check (not available) 0= No 0 X
06-0004 Encoded ticket verification 0= No / 1= Yes 0 10
06-0005 Payment cancelled ticket format 0=Old magnetic system compatible format 0 X
1= All discount supported ticket

- 12 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-7. Pass Card Setting


Address Item Setting Range Default 77 79
07-0001 First time pass card reading 0= No / 1= Yes 1 151
07-0002 Pass card “n” min. check 0= Not check / 1- 99= 1-99 min. 3
07-0003 Encoded pass card verification 0= No / 1= Yes 0 10
07-0004 Pass card renewal possible period 1 0-31 = Renewal is possible if it is 0-31 days before the expiration date 0
(before the expiration date)
07-0005 Pass card renewal possible period 2 (after 0-31 = Renewal is possible if it is 0-31 days after the expiration date 0
the expiration date)
07-0006 Pass card renewal calculation method 0= Expiration date + 1day + (number of month - 1day) 0
(pass card start date is not changed.) 1= Expiration date + number of month
07-0007 Communication check method 0= Check by communication table 0 X
07-0008 Valid period start date for the expired pass 0= Renewed date 0
card renewal 1= Expiration date
07-0009 Unused 0
07-0010 Pass card 1 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 1 120
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0011 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0012 Read/write mode 0= Read/write / 1= Read only 0
07-0013 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0014 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 145
card was not combined used
with parking ticket.
07-0015 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0016 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0017 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0018 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0019 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0020 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0021 Unused 0 X
07-0022 Unused 0 X
07-0023 Expired pass card accepting 0= No / 1= Yes 1
07-0024 Support hotel pass card 0= No 0
(not available)
07-0025 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0026 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 128
07-0027 Invalid day (Tuesday) 0 128
07-0028 Invalid day (Wednesday) 0 128
07-0029 Invalid day (Thursday) 0 128
07-0030 Invalid day (Friday) 0 129
07-0031 Invalid day (Saturday) 0 129
07-0032 Invalid day (Sunday) 0 129
07-0033 Invalid day (Special date) 0 129
07-0034 Invalid day (Special period 1) 0
07-0035 Invalid day (Special period 2) 0
07-0036 Invalid day (Special period 3) 0
07-0037 Unused 0
07-0038 Unused 0
07-0039 Unused 0

- 13 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0040 Pass card 2 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 121
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0041 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0042 Read/write mode 0= Read/write / 1= Read only 0
07-0043 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0044 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 145
card was not combined used
with parking ticket.
07-0045 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0046 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0047 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0048 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0049 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0050 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0051 Unused 0 X
07-0052 Unused 0 X
07-0053 Expired pass card accepting 0= No / 1= Yes 1
07-0054 Support hotel pass card 0= No 0
(not available)
07-0055 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0056 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 130
07-0057 Invalid day (Tuesday) 0 130
07-0058 Invalid day (Wednesday) 0 130
07-0059 Invalid day (Thursday) 0 130
07-0060 Invalid day (Friday) 0 131
07-0061 Invalid day (Saturday) 0 131
07-0062 Invalid day (Sunday) 0 131
07-0063 Invalid day (Special date) 0 131
07-0064 Invalid day (Special period 1) 0
07-0065 Invalid day (Special period 2) 0
07-0066 Invalid day (Special period 3) 0
07-0067 Unused 0
07-0068 Unused 0
07-0069 Unused 0

- 14 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0070 Pass card 3 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 122
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0071 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0072 Read/write mode 0= Read/write / 1= Read only 0
07-0073 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0074 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 146
card was not combined used
with parking ticket.
07-0075 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0076 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0077 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0078 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0079 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0080 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0081 Unused 0 X
07-0082 Unused 0 X
07-0083 Expired pass card accepting 0= No / 1= Yes 1
07-0084 Support hotel pass card 0= No 0
(not available)
07-0085 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0086 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 132
07-0087 Invalid day (Tuesday) 0 132
07-0088 Invalid day (Wednesday) 0 132
07-0089 Invalid day (Thursday) 0 132
07-0090 Invalid day (Friday) 0 133
07-0091 Invalid day (Saturday) 0 133
07-0092 Invalid day (Sunday) 0 133
07-0093 Invalid day (Special date) 0 133
07-0094 Invalid day (Special period 1) 0
07-0095 Invalid day (Special period 2) 0
07-0096 Invalid day (Special period 3) 0
07-0097 Unused 0
07-0098 Unused 0
07-0099 Unused 0

- 15 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0100 Pass card 4 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 123
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0101 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0102 Read/write mode 0= Read/write / 1= Read only 0
07-0103 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0104 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 146
card was not combined used
with parking ticket.
07-0105 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0106 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0107 Pass card renewal function 00= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0108 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0109 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0110 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0111 Unused 0 X
07-0112 Unused 0 X
07-0113 Expired pass card accepting 0= No / 1= Yes 1
07-0114 Support hotel pass card 0= No 0
(not available)
07-0115 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0116 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 134
07-0117 Invalid day (Tuesday) 0 134
07-0118 Invalid day (Wednesday) 0 134
07-0119 Invalid day (Thursday) 0 134
07-0120 Invalid day (Friday) 0 135
07-0121 Invalid day (Saturday) 0 135
07-0122 Invalid day (Sunday) 0 135
07-0123 Invalid day (Special date) 0 135
07-0124 Invalid day (Special period 1) 0
07-0125 Invalid day (Special period 2) 0
07-0126 Invalid day (Special period 3) 0
07-0127 Unused 0
07-0128 Unused 0
07-0129 Unused 0

- 16 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0130 Pass card 5 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 124
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0131 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0132 Read/write mode 0= Read/write / 1= Read only 0
07-0133 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0134 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 147
card was not combined used
with parking ticket.
07-0135 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0136 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0137 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0138 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0139 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0140 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0141 Unused 0 X
07-0142 Unused 0 X
07-0143 Expired pass card accepting 0= No / 1= Yes 1
07-0144 Support hotel pass card 0= No 0
(not available)
07-0145 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0146 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 136
07-0147 Invalid day (Tuesday) 0 136
07-0148 Invalid day (Wednesday) 0 136
07-0149 Invalid day (Thursday) 0 136
07-0150 Invalid day (Friday) 0 137
07-0151 Invalid day (Saturday) 0 137
07-0152 Invalid day (Sunday) 0 137
07-0153 Invalid day (Special date) 0 137
07-0154 Invalid day (Special period 1) 0
07-0155 Invalid day (Special period 2) 0
07-0156 Invalid day (Special period 3) 0
07-0157 Unused 0
07-0158 Unused 0
07-0159 Unused 0

- 17 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0160 Pass card 6 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 125
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0161 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0162 Read/write mode 0= Read/write / 1= Read only 0
07-0163 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0164 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 147
card was not combined used
with parking ticket.
07-0165 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0166 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0167 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0168 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0169 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0170 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0171 Unused 0 X
07-0172 Unused 0 X
07-0173 Expired pass card accepting 0= No / 1= Yes 1
07-0174 Support hotel pass card 0= No 0
(not available)
07-0175 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0176 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 138
07-0177 Invalid day (Tuesday) 0 138
07-0178 Invalid day (Wednesday) 0 138
07-0179 Invalid day (Thursday) 0 138
07-0180 Invalid day (Friday) 0 139
07-0181 Invalid day (Saturday) 0 139
07-0182 Invalid day (Sunday) 0 139
07-0183 Invalid day (Special date) 0 139
07-0184 Invalid day (Special period 1) 0
07-0185 Invalid day (Special period 2) 0
07-0186 Invalid day (Special period 3) 0
07-0187 Unused 0
07-0188 Unused 0
07-0189 Unused 0

- 18 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0190 Pass card 7 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 126
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0191 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0192 Read/write mode 0= Read/write / 1= Read only 0
07-0193 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0194 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 148
card was not combined used
with parking ticket.
07-0195 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0196 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0197 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0198 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0199 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0200 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0201 Unused 0 X
07-0202 Unused 0 X
07-0203 Expired pass card accepting 0= No / 1= Yes 1
07-0204 Support hotel pass card 0= No 0
(not available)
07-0205 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0206 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 140
07-0207 Invalid day (Tuesday) 0 140
07-0208 Invalid day (Wednesday) 0 140
07-0209 Invalid day (Thursday) 0 140
07-0210 Invalid day (Friday) 0 141
07-0211 Invalid day (Saturday) 0 141
07-0212 Invalid day (Sunday) 0 141
07-0213 Invalid day (Special date) 0 141
07-0214 Invalid day (Special period 1) 0
07-0215 Invalid day (Special period 2) 0
07-0216 Invalid day (Special period 3) 0
07-0217 Unused 0
07-0218 Unused 0
07-0219 Unused 0

- 19 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0220 Pass card 8 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0 127
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0221 In/out check 0= Not check 2 151
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0222 Read/write mode 0= Read/write / 1= Read only 0
07-0223 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0 144
07-0224 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1 148
card was not combined used
with parking ticket.
07-0225 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0226 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0227 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0228 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0229 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0230 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0231 Unused 0 X
07-0232 Unused 0 X
07-0233 Expired pass card accepting 0= No / 1= Yes 1
07-0234 Support hotel pass card 0= No 0
(not available)
07-0235 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0236 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0 142
07-0237 Invalid day (Tuesday) 0 142
07-0238 Invalid day (Wednesday) 0 142
07-0239 Invalid day (Thursday) 0 142
07-0240 Invalid day (Friday) 0 143
07-0241 Invalid day (Saturday) 0 143
07-0242 Invalid day (Sunday) 0 143
07-0243 Invalid day (Special date) 0 143
07-0244 Invalid day (Special period 1) 0
07-0245 Invalid day (Special period 2) 0
07-0246 Invalid day (Special period 3) 0
07-0247 Unused 0
07-0248 Unused 0
07-0249 Unused 0

- 20 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0250 Pass card 9 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0251 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0252 Read/write mode 0= Read/write / 1= Read only 0
07-0253 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0254 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0255 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0256 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0257 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0258 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0259 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0260 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0261 Unused 0 X
07-0262 Unused 0 X
07-0263 Expired pass card accepting 0= No / 1= Yes 1
07-0264 Support hotel pass card 0= No 0
(not available)
07-0265 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0266 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0267 Invalid day (Tuesday) 0
07-0268 Invalid day (Wednesday) 0
07-0269 Invalid day (Thursday) 0
07-0270 Invalid day (Friday) 0
07-0271 Invalid day (Saturday) 0
07-0272 Invalid day (Sunday) 0
07-0273 Invalid day (Special date) 0
07-0274 Invalid day (Special period 1) 0
07-0275 Invalid day (Special period 2) 0
07-0276 Invalid day (Special period 3) 0
07-0277 Unused 0
07-0278 Unused 0
07-0279 Unused 0

- 21 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0280 Pass card 10 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0281 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0282 Read/write mode 0= Read/write / 1= Read only 0
07-0283 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0284 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0285 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0286 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0287 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-030= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0288 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0289 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0290 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0291 Unused 0 X
07-0292 Unused 0 X
07-0293 Expired pass card accepting 0= No / 1= Yes 1
07-0294 Support hotel pass card 0= No 0
(not available)
07-0295 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0296 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0297 Invalid day (Tuesday) 0
07-0298 Invalid day (Wednesday) 0
07-0299 Invalid day (Thursday) 0
07-0300 Invalid day (Friday) 0
07-0301 Invalid day (Saturday) 0
07-0302 Invalid day (Sunday) 0
07-0303 Invalid day (Special date) 0
07-0304 Invalid day (Special period 1) 0
07-0305 Invalid day (Special period 2) 0
07-0306 Invalid day (Special period 3) 0
07-0307 Unused 0
07-0308 Unused 0
07-0309 Unused 0

- 22 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0310 Pass card 11 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0311 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0312 Read/write mode 0= Read/write / 1= Read only 0
07-0313 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0314 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0315 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0316 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0317 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-033= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0318 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0319 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0320 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0321 Unused 0 X
07-0322 Unused 0 X
07-0323 Expired pass card accepting 0= No / 1= Yes 1
07-0324 Support hotel pass card 0= No 0
(not available)
07-0325 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0326 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0327 Invalid day (Tuesday) 0
07-0328 Invalid day (Wednesday) 0
07-0329 Invalid day (Thursday) 0
07-0330 Invalid day (Friday) 0
07-0331 Invalid day (Saturday) 0
07-0332 Invalid day (Sunday) 0
07-0333 Invalid day (Special date) 0
07-0334 Invalid day (Special period 1) 0
07-0335 Invalid day (Special period 2) 0
07-0336 Invalid day (Special period 3) 0
07-0337 Unused 0
07-0338 Unused 0
07-0339 Unused 0

- 23 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0340 Pass card 12 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0341 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0342 Read/write mode 0= Read/write / 1= Read only 0
07-0343 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0344 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0345 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0346 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0347 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0348 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0349 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0350 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0351 Unused 0 X
07-0352 Unused 0 X
07-0353 Expired pass card accepting 0= No / 1= Yes 1
07-0354 Support hotel pass card 0= No 0
(not available)
07-0355 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0356 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0357 Invalid day (Tuesday) 0
07-0358 Invalid day (Wednesday) 0
07-0359 Invalid day (Thursday) 0
07-0360 Invalid day (Friday) 0
07-0361 Invalid day (Saturday) 0
07-0362 Invalid day (Sunday) 0
07-0363 Invalid day (Special date) 0
07-0364 Invalid day (Special period 1) 0
07-0365 Invalid day (Special period 2) 0
07-0366 Invalid day (Special period 3) 0
07-0367 Unused 0
07-0368 Unused 0
07-0369 Unused 0

- 24 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0370 Pass card 13 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0371 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0372 Read/write mode 0= Read/write / 1= Read only 0
07-0373 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0374 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0375 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0376 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0377 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0378 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0379 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0380 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0381 Unused 0 X
07-0382 Unused 0 X
07-0383 Expired pass card accepting 0= No / 1= Yes 1
07-0384 Support hotel pass card 0= No 0
(not available)
07-0385 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0386 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0387 Invalid day (Tuesday) 0
07-0388 Invalid day (Wednesday) 0
07-0389 Invalid day (Thursday) 0
07-0390 Invalid day (Friday) 0
07-0391 Invalid day (Saturday) 0
07-0392 Invalid day (Sunday) 0
07-0393 Invalid day (Special date) 0
07-0394 Invalid day (Special period 1) 0
07-0395 Invalid day (Special period 2) 0
07-0396 Invalid day (Special period 3) 0
07-0397 Unused 0
07-0398 Unused 0
07-0399 Unused 0

- 25 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0400 Pass card 14 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0401 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0402 Read/write mode 0= Read/write / 1= Read only 0
07-0403 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0404 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0405 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0406 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0407 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0408 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0409 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0410 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0411 Unused 0 X
07-0412 Unused 0 X
07-0413 Expired pass card accepting 0= No / 1= Yes 1
07-0414 Support hotel pass card 0= No 0
(not available)
07-0415 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0416 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0417 Invalid day (Tuesday) 0
07-0418 Invalid day (Wednesday) 0
07-0419 Invalid day (Thursday) 0
07-0420 Invalid day (Friday) 0
07-0421 Invalid day (Saturday) 0
07-0422 Invalid day (Sunday) 0
07-0423 Invalid day (Special date) 0
07-0424 Invalid day (Special period 1) 0
07-0425 Invalid day (Special period 2) 0
07-0426 Invalid day (Special period 3) 0
07-0427 Unused 0
07-0428 Unused 0
07-0429 Unused 0

- 26 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


07-0430 Pass card 15 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
07-0431 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
07-0432 Read/write mode 0= Read/write / 1= Read only 0
07-0433 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
07-0434 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
07-0435 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
07-0436 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
07-0437 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
07-0438 Charge for renewed pass 0-999999= 0-999999 yen 0
card
07-0439 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
07-0440 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1 X
07-0441 Unused 0 X
07-0442 Unused 0 X
07-0443 Expired pass card accepting 0= No / 1= Yes 1
07-0444 Support hotel pass card 0= No 0
(not available)
07-0445 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
07-0446 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
07-0447 Invalid day (Tuesday) 0
07-0448 Invalid day (Wednesday) 0
07-0449 Invalid day (Thursday) 0
07-0450 Invalid day (Friday) 0
07-0451 Invalid day (Saturday) 0
07-0452 Invalid day (Sunday) 0
07-0453 Invalid day (Special date) 0
07-0454 Invalid day (Special period 1) 0
07-0455 Invalid day (Special period 2) 0
07-0456 Invalid day (Special period 3) 0
07-0457 Unused 0
07-0458 Unused 0
07-0459 Unused 0
07-0460 Unused
07-0461 Unused
07-0462 Maximum pass card number 0= 4000 / 1= 10000 / 2= 20000 / 3= 30000 0
07-0463 Pass card renewal announcement before 0-31= 0-31 day(s) 0
pass card expiry date
07-0464 Display of expiry notice 0= Expiry date / 1= Remaining days 0
07-0465 Display of pass card renewal period 0= Not display / 1= Display 0

- 27 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-8. JIS Pass Card Setting (Not Available)


Address Item Setting Range Default 77 79
08-0001 Unused 0 X

08-0009 Unused 0 X

2-9. Discount Setting


Address Item Setting Range Default 77 79
09-0001 Total Limit for No. of Service Ticket and 0=No Limit / 1 - 99=1-99 Service Tickets 40 163
Store Ticket
09-0002 Used mark printing on the used service 0= No used mark print 1
ticket 1= Print used mark
2= Entry time / paid time / discount amount is printed.
09-0003 High speed service ticket processing (not 0= No 0 X
available)
09-0004 Service ticket usage for debit card 0=Yes / 1=No 1
payment
(Including Store discount ticket / Discount
ticket / Coupon ticket / Prepaid card / Debit
card)
09-0005 Service ticket usage for pass card 0=Yes / 1=No 1
payment
(Including Store discount ticket / Discount
ticket / Coupon ticket / Prepaid card / Debit
card)
09-0006 Store discount ticket validity period 0=Unlimited 0
1=Apply Ticket validity period
09-0007 Limit for No. of Service Ticket A Usage 0=No Limit by Ticket Type / 1 - 99=1-99 Service Tickets A 0
09-0008 Limit for No. of Service Ticket B Usage 0=No Limit by Ticket Type / 1 - 99=1-99 Service Tickets B 0
09-0009 Limit for No. of Service Ticket C Usage 0=No Limit by Ticket Type / 1 - 99=1-99 Service Tickets C 0
09-0010 Limit for No. of Store Ticket Usage 0=No Limit by Ticket Type / 1 - 99=1-99 Store Tickets 0
09-0011 Service Ticket 15 Types Usage 0= No / 1= Yes 0
09-0012 Transaction Data for Service Ticket 15 0= Data for service ticket D-O is combined into service ticket C 0
Types 1= Data for service ticket D-O separately handled
09-0013 Limit for number of service ticket D usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0014 Limit for number of service ticket E usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0015 Limit for number of service ticket F usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0016 Limit for number of service ticket G usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0017 Limit for number of service ticket H usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0018 Limit for number of service ticket I usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0019 Limit for number of service ticket J usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0020 Limit for number of service ticket K usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0021 Limit for number of service ticket L usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0022 Limit for number of service ticket M usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0023 Limit for number of service ticket N usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0024 Limit for number of service ticket O usage 0= Not Limited / 1-99= 1-99 tickets 0
09-0025 Service ticket expiration date 0= No expiration date / 1= Expiration date on the ticket is available 0
09-0026 Unused 0

09-0094 Unused 0

- 28 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-10. Service Ticket Setting


Address Item Setting Range Default 77 79
10-0001 Service Ticket A Function [Function] (% Discount is not available.) 0
10-0002 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
10-0003 Rate Change / 4= Total Amount Discount 0
10-0004 Service Ticket B Function [Data] 0
10-0005 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
10-0006 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
10-0007 Service Ticket C Function < Function= 4 > 0 0
10-0008 Data [Rate change] 0
10-0009 Rate Change 0= No rate change / 1-12= Change to A - L Rate 0
10-0010 Service Ticket D Function 0
10-0011 Data 0
10-0012 Rate Change 0
10-0013 Service Ticket E Function 0
10-0014 Data 0
10-0015 Rate Change 0
10-0016 Service Ticket F Function 0
10-0017 Data 0
10-0018 Rate Change 0
10-0019 Service Ticket G Function 0
10-0020 Data 0
10-0021 Rate Change 0
10-0022 Service Ticket H Function 0
10-0023 Data 0
10-0024 Rate Change 0
10-0025 Service Ticket I Function 0
10-0026 Data 0
10-0027 Rate Change 0
10-0028 Service Ticket J Function 0
10-0029 Data 0
10-0030 Rate Change 0
10-0031 Service Ticket K Function 0
10-0032 Data 0
10-0033 Rate Change 0
10-0034 Service Ticket L Function 0
10-0035 Data 0
10-0036 Rate Change 0
10-0037 Service Ticket M Function 0
10-0038 Data 0
10-0039 Rate Change 0
10-0040 Service Ticket N Function 0
10-0041 Data 0
10-0042 Rate Change 0
10-0043 Service Ticket O Function 0
10-0044 Data 0
10-0045 Rate Change 0

- 29 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-11. Store Discount Setting


Address Item Setting Range Default 77 79
11-0001 Store No.1 Discount Function [Function] (% Discount is not available.) 0
11-0002 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
11-0003 Rate Change / 4= Total Amount Discount / 9=Add Extra Charge (Surcharge) 0
11-0004 Store No.2 Discount Function [Data] 0
11-0005 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
11-0006 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
11-0007 Store No.3 Discount Function < Function= 4 > 0 0
11-0008 Data < Function= 9 > 0-999999= 0-999999 yen add 0
11-0009 Rate Change [Rate change] 0
11-0010 Store No.4 Discount Function 0= No rate change / 1-12= Change to A - L Rate 0
11-0011 Data 0
11-0012 Rate Change 0
11-0013 Store No.5 Discount Function 0
11-0014 Data 0
11-0015 Rate Change 0
11-0016 Store No.6 Discount Function 0
11-0017 Data 0
11-0018 Rate Change 0
11-0019 Store No.7 Discount Function 0
11-0020 Data 0
11-0021 Rate Change 0
11-0022 Store No.8 Discount Function 0
11-0023 Data 0
11-0024 Rate Change 0
11-0025 Store No.9 Discount Function 0
11-0026 Data 0
11-0027 Rate Change 0
11-0028 Store No.10 Discount Function 0
11-0029 Data 0
11-0030 Rate Change 0
11-0031 Store No.11 Discount Function 0
11-0032 Data 0
11-0033 Rate Change 0
11-0034 Store No.12 Discount Function 0
11-0035 Data 0
11-0036 Rate Change 0
11-0037 Store No.13 Discount Function 0
11-0038 Data 0
11-0039 Rate Change 0
11-0040 Store No.14 Discount Function 0
11-0041 Data 0
11-0042 Rate Change 0
11-0043 Store No.15 Discount Function 0
11-0044 Data 0
11-0045 Rate Change 0
11-0046 Store No.16 Discount Function 0
11-0047 Data 0
11-0048 Rate Change 0
11-0049 Store No.17 Discount Function 0
11-0050 Data 0
11-0051 Rate Change 0
11-0052 Store No.18 Discount Function 0
11-0053 Data 0
11-0054 Rate Change 0
11-0055 Store No.19 Discount Function 0
11-0056 Data 0
11-0057 Rate Change 0
11-0058 Store No.20 Discount Function 0
11-0059 Data 0
11-0060 Rate Change 0

- 30 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


11-0061 Store No.21 Discount Function [Function] (% Discount is not available.) 0
11-0062 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
11-0063 Rate Change / 4= Total Amount Discount / 9=Add Extra Charge (Surcharge) 0
11-0064 Store No.22 Discount Function [Data] 0
11-0065 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
11-0066 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
11-0067 Store No.23 Discount Function < Function= 4 > 0 0
11-0068 Data < Function= 9 > 0-999999= 0-999999 yen add 0
11-0069 Rate Change [Rate change] 0
11-0070 Store No.24 Discount Function 0= No rate change / 1-12= Change to A - L Rate 0
11-0071 Data 0
11-0072 Rate Change 0
11-0073 Store No.25 Discount Function 0
11-0074 Data 0
11-0075 Rate Change 0
11-0076 Store No.26 Discount Function 0
11-0077 Data 0
11-0078 Rate Change 0
11-0079 Store No.27 Discount Function 0
11-0080 Data 0
11-0081 Rate Change 0
11-0082 Store No.28 Discount Function 0
11-0083 Data 0
11-0084 Rate Change 0
11-0085 Store No.29 Discount Function 0
11-0086 Data 0
11-0087 Rate Change 0
11-0088 Store No.30 Discount Function 0
11-0089 Data 0
11-0090 Rate Change 0
11-0091 Store No.31 Discount Function 0
11-0092 Data 0
11-0093 Rate Change 0
11-0094 Store No.32 Discount Function 0
11-0095 Data 0
11-0096 Rate Change 0
11-0097 Store No.33 Discount Function 0
11-0098 Data 0
11-0099 Rate Change 0
11-0100 Store No.34 Discount Function 0
11-0101 Data 0
11-0102 Rate Change 0
11-0103 Store No.35 Discount Function 0
11-0104 Data 0
11-0105 Rate Change 0
11-0106 Store No.36 Discount Function 0
11-0107 Data 0
11-0108 Rate Change 0
11-0109 Store No.37 Discount Function 0
11-0110 Data 0
11-0111 Rate Change 0
11-0112 Store No.38 Discount Function 0
11-0113 Data 0
11-0114 Rate Change 0
11-0115 Store No.39 Discount Function 0
11-0116 Data 0
11-0117 Rate Change 0
11-0118 Store No.40 Discount Function 0
11-0119 Data 0
11-0120 Rate Change 0

- 31 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


11-0121 Store No.41 Discount Function [Function] (% Discount is not available.) 0
11-0122 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
11-0123 Rate Change / 4= Total Amount Discount / 9=Add Extra Charge (Surcharge) 0
11-0124 Store No.42 Discount Function [Data] 0
11-0125 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
11-0126 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
11-0127 Store No.43 Discount Function < Function= 4 > 0 0
11-0128 Data < Function= 9 > 0-999999= 0-999999 yen add 0
11-0129 Rate Change [Rate change] 0
11-0130 Store No.44 Discount Function 0= No rate change / 1-12= Change to A - L Rate 0
11-0131 Data 0
11-0132 Rate Change 0
11-0133 Store No.45 Discount Function 0
11-0134 Data 0
11-0135 Rate Change 0
11-0136 Store No.46 Discount Function 0
11-0137 Data 0
11-0138 Rate Change 0
11-0139 Store No.47 Discount Function 0
11-0140 Data 0
11-0141 Rate Change 0
11-0142 Store No.48 Discount Function 0
11-0143 Data 0
11-0144 Rate Change 0
11-0145 Store No.49 Discount Function 0
11-0146 Data 0
11-0147 Rate Change 0
11-0148 Store No.50 Discount Function 0
11-0149 Data 0
11-0150 Rate Change 0
11-0151 Store No.51 Discount Function 0
11-0152 Data 0
11-0153 Rate Change 0
11-0154 Store No.52 Discount Function 0
11-0155 Data 0
11-0156 Rate Change 0
11-0157 Store No.53 Discount Function 0
11-0158 Data 0
11-0159 Rate Change 0
11-0160 Store No.54 Discount Function 0
11-0161 Data 0
11-0162 Rate Change 0
11-0163 Store No.55 Discount Function 0
11-0164 Data 0
11-0165 Rate Change 0
11-0166 Store No.56 Discount Function 0
11-0167 Data 0
11-0168 Rate Change 0
11-0169 Store No.57 Discount Function 0
11-0170 Data 0
11-0171 Rate Change 0
11-0172 Store No.58 Discount Function 0
11-0173 Data 0
11-0174 Rate Change 0
11-0175 Store No.59 Discount Function 0
11-0176 Data 0
11-0177 Rate Change 0
11-0178 Store No.60 Discount Function 0
11-0179 Data 0
11-0180 Rate Change 0

- 32 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


11-0181 Store No.61 Discount Function [Function] (% Discount is not available.) 0
11-0182 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
11-0183 Rate Change / 4= Total Amount Discount / 9=Add Extra Charge (Surcharge) 0
11-0184 Store No.62 Discount Function [Data] 0
11-0185 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
11-0186 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
11-0187 Store No.63 Discount Function < Function= 4 > 0 0
11-0188 Data < Function= 9 > 0-999999= 0-999999 yen add 0
11-0189 Rate Change [Rate change] 0
11-0190 Store No.64 Discount Function 0= No rate change / 1-12= Change to A - L Rate 0
11-0191 Data 0
11-0192 Rate Change 0
11-0193 Store No.65 Discount Function 0
11-0194 Data 0
11-0195 Rate Change 0
11-0196 Store No.66 Discount Function 0
11-0197 Data 0
11-0198 Rate Change 0
11-0199 Store No.67 Discount Function 0
11-0200 Data 0
11-0201 Rate Change 0
11-0202 Store No.68 Discount Function 0
11-0203 Data 0
11-0204 Rate Change 0
11-0205 Store No.69 Discount Function 0
11-0206 Data 0
11-0207 Rate Change 0
11-0208 Store No.70 Discount Function 0
11-0209 Data 0
11-0210 Rate Change 0
11-0211 Store No.71 Discount Function 0
11-0212 Data 0
11-0213 Rate Change 0
11-0214 Store No.72 Discount Function 0
11-0215 Data 0
11-0216 Rate Change 0
11-0217 Store No.73 Discount Function 0
11-0218 Data 0
11-0219 Rate Change 0
11-0220 Store No.74 Discount Function 0
11-0221 Data 0
11-0222 Rate Change 0
11-0223 Store No.75 Discount Function 0
11-0224 Data 0
11-0225 Rate Change 0
11-0226 Store No.76 Discount Function 0
11-0227 Data 0
11-0228 Rate Change 0
11-0229 Store No.77 Discount Function 0
11-0230 Data 0
11-0231 Rate Change 0
11-0232 Store No.78 Discount Function 0
11-0233 Data 0
11-0234 Rate Change 0
11-0235 Store No.79 Discount Function 0
11-0236 Data 0
11-0237 Rate Change 0
11-0238 Store No.80 Discount Function 0
11-0239 Data 0
11-0240 Rate Change 0

- 33 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


11-0241 Store No.81 Discount Function [Function] (% Discount is not available.) 0
11-0242 Data 0= Not Used / 1= Time Discount / 2= Fee Discount 0
11-0243 Rate Change / 4= Total Amount Discount / 9=Add Extra Charge (Surcharge) 0
11-0244 Store No.82 Discount Function [Data] 0
11-0245 Data < Function= 1 > 0-9959= 0:00-99:59 discount 0
11-0246 Rate Change < Function= 2 > 0-999999= 0-999999 yen discount 0
11-0247 Store No.83 Discount Function < Function= 4 > 0 0
11-0248 Data < Function= 9 > 0-999999= 0-999999 yen add 0
11-0249 Rate Change [Rate change] 0
11-0250 Store No.84 Discount Function 0= No rate change / 1-12= Change to A - L Rate 0
11-0251 Data 0
11-0252 Rate Change 0
11-0253 Store No.85 Discount Function 0
11-0254 Data 0
11-0255 Rate Change 0
11-0256 Store No.86 Discount Function 0
11-0257 Data 0
11-0258 Rate Change 0
11-0259 Store No.87 Discount Function 0
11-0260 Data 0
11-0261 Rate Change 0
11-0262 Store No.88 Discount Function 0
11-0263 Data 0
11-0264 Rate Change 0
11-0265 Store No.89 Discount Function 0
11-0266 Data 0
11-0267 Rate Change 0
11-0268 Store No.90 Discount Function 0
11-0269 Data 0
11-0270 Rate Change 0
11-0271 Store No.91 Discount Function 0
11-0272 Data 0
11-0273 Rate Change 0
11-0274 Store No.92 Discount Function 0
11-0275 Data 0
11-0276 Rate Change 0
11-0277 Store No.93 Discount Function 0
11-0278 Data 0
11-0279 Rate Change 0
11-0280 Store No.94 Discount Function 0
11-0281 Data 0
11-0282 Rate Change 0
11-0283 Store No.95 Discount Function 0
11-0284 Data 0
11-0285 Rate Change 0
11-0286 Store No.96 Discount Function 0
11-0287 Data 0
11-0288 Rate Change 0
11-0289 Store No.97 Discount Function 0
11-0290 Data 0
11-0291 Rate Change 0
11-0292 Store No.98 Discount Function 0
11-0293 Data 0
11-0294 Rate Change 0
11-0295 Store No.99 Discount Function 0
11-0296 Data 0
11-0297 Rate Change 0
11-0298 Store No.100 Discount Function 0
11-0299 Data 0
11-0300 Rate Change 0

- 34 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-12. Multi-store Discount Setting


Address Item Setting Range Default 77 79
12-0001 Multi-store Discount Setting 0= No (Store No. 1 - 100) 0 X
1= Yes (Store No. 1 1 999)
12-0002 Store Discount Type 0= Store Discount Type on Parameter setting 0 X
1= Store Discount Type on Magstripe data
12-0003 Unused 0 X

12-0010 Unused 0 X
12-0011 Store Discount Type No. 1 [Function] 0 X
Discount Function 0= Not in Use
12-0012 Data 1= Time Discount 0 X
12-0013 Rate Switch 2= Fee Discount 0 X
12-0014 Store Discount Type No. 2 3= % Discount 0 X
Discount Function 4= All Amount Discount
12-0015 Data 9= Surcharge 0 X
12-0016 Rate Switch 0 X
12-0017 Store Discount Type No. 3 [Data] 0 X
Discount Function <Function= 1 case> 0-9959= 0:00-99:59 Discount
12-0018 Data <Function= 2 case> 0-999999= 0-999999 Discount 0 X
12-0019 Rate Switch <Function= 3 case> 0-100= 0-100% Discount 0 X
<Function= 4 case> 0 0 X
12-0305 Store Discount Type No. 99 <Function= 9 case> 0-999999= 0-999999 Add 0 X
Discount Function
12-0306 Data [Rate Switch] 0 X
0= No Rate Switch
12-0307 Rate Switch 1-12= Switch Fee Rate to A-L 0 X
12-0308 Store Discount Type No. 100 0 X
Discount Function
12-0309 Data 0 X
12-0310 Rate Switch 0 X
12-0311 Store No.1store Discount Type Select 0= No / 1-100= Store No.1 - 100 0 X
12-0312 Store No.2 Store Discount Type Select 0 X
0 X
12-1308 Store No.998 Store Discount Type Select 0 X
12-1309 Store No.999 Store Discount Type Select 0 X
12-1310 Unused 0 X

- 35 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-13. Discount Ticket Setting (Not Available)


Address Item Setting Range Default 77 79
13-0001 Unused 0 X

13-0301 Unused 0 X

2-14. Point Card (Not Available)


Address Item Setting Range Default 77 79
14-0001 Unused 0 X

14-0016 Unused 0 X

2-15. Prepaid Card


Address Item Setting Range Default 77 79
15-0001 Prepaid card usage 0= No / 1= Yes (combined usage with a coupon ticket or debit card is 0
not possible)
15-0002 Prepaid card mark (printing) amount 1 1-999999=1-999999 yen / 0= not used 500 380
15-0003 Prepaid card mark (printing) amount 2 The amount has to be 1 < 2 < 3 < 4 < 5 < 6 < 7. 1000 381
15-0004 Prepaid card mark (printing) amount 3 2000 382
15-0005 Prepaid card mark (printing) amount 4 3000 383
15-0006 Prepaid card mark (printing) amount 5 5000 384
15-0007 Prepaid card mark (printing) amount 6 If amount 1 is not 0, prepaid card is usable. 7000 385
15-0008 Prepaid card mark (printing) amount 7 10000 386
15-0009 Used mark print at the first time 0= No / 1= Yes 1 387
15-0010 Zero balance prepaid card swallowing 0= No / 1= Yes 0
15-0011 Prepaid card encoding verification 0= No / 1= Yes / 2= Yes if the balance is not 0 0

2-16. Coupon Ticket


Address Item Setting Range Default 77 79
16-0001 Coupon ticket usage 0= No / 1= Yes (as coupon ticket) / 2= Yes (as courtesy card) 0 add 388
(combined usage with a prepaid card or debit card is not possible)
16-0002 Coupon ticket mark (Print) Amount1 1-100= 1-100 times / 0= Not used 1
16-0003 Coupon ticket mark (Print) Amount2 The amount has to be 1 < 2 < 3 < 4 < 5 < 6 < 7 < 8 < 9 < 10 < 11. 2
16-0004 Coupon ticket mark (Print) Amount3 3
16-0005 Coupon ticket mark (Print) Amount4 4
16-0006 Coupon ticket mark (Print) Amount5 5
16-0007 Coupon ticket mark (Print) Amount6 6
16-0008 Coupon ticket mark (Print) Amount7 7
16-0009 Coupon ticket mark (Print) Amount8 8
16-0010 Coupon ticket mark (Print) Amount9 9
16-0011 Coupon ticket mark (Print) Amount10 10
16-0012 Coupon ticket mark (Print) Amount11 11
16-0013 Zero balance prepaid card swallowing 0= No / 1= Yes 0
16-0014 Prepaid card encoding verification 0= No / 1= Yes / 2= Yes if the balance is not 0 0

2-17. Unused
Address Item Setting Range Default 77 79
17-0001 Unused 0

17-0006 Unused 0

- 36 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-18. Total Setting


Address Item Setting Range Default 77 79
18-0001 Available total 0= T, GT total / 1= T, GT, MT total 0
18-0002 Multiple totals system 0= multiple T total / 1= multiple T+GT total 0
18-0003 Discount amount 0= Not total as actual discount amount 1 530
1= Total as actual discount amount
Example: In case the fee is 100 yen, and the discount amount is 300
yen:
In case of 0, the discount amount is totaled as 300 yen.
In case of 1, the discount amount is totaled as 100 yen
18-0004 Change is dispensed even for the 0= No / 1= Yes (applied for all discounted amount) 0 531
discounted amount
18-0005 Include the discounted amount by the 0= No / 1= Yes 0 532
service ticket in the total sales amount
18-0006 Include the discounted amount by the 0= No / 1= Yes 1 533
service ticket in the total discount amount
18-0007 Include the store discount amount in the 0= No / 1= Yes 0 534
total sales amount
18-0008 Include the store discount amount in the 0= No / 1= Yes 0 535
total discount amount
18-0009 Include the coupon ticket receipt amount 0= No / 1= Yes 0 536
in the total sales amount
18-0010 Include the coupon ticket receipt amount 0= No / 1= Yes 0 537
in the total discount amount
18-0011 Include the discount time (for each rate) 0= No / 1= Yes 0 538
receipt amount in the total sales amount
18-0012 Include the discount time (for each rate) 0= No / 1= Yes 0 539
receipt amount in the total discount
amount
18-0013 Include the paid amount by credit card in 0= No / 1= Yes 0
the total sales amount
18-0014 Include the paid amount by credit card in 0= No / 1= Yes 0
the total discount amount
18-0015 Include the paid amount by prepaid card in 0= No / 1= Yes 0
the total sales amount
18-0016 Include the paid amount by prepaid card in 0= No / 1= Yes 0
the total sales amount
18-0017 Include the discounted amount by the 0= No 0 X
point card in the total sales amount (not
available)
18-0018 Include the discounted amount by the 0= No 0 X
point card in the total discount amount (not
available)
18-0019 Include the discounted amount by the 0= No 0 X
discount ticket in the total sales amount
(not available)
18-0020 Include the discounted amount by the 0= No 0 X
discount ticket in the total discount amount
(not available)
18-0021 Include the internal tax amount in the total 0= No / 1= Yes 0
tax amount
18-0022 Automatic total 0= No / 1= Only for journal / 2= Journal and receipt both 0 542
18-0023 Automatic total time 0-2359= 0:00-23:59 0 543
18-0024 Print when data is 0 0= No / 1= Yes 1 518
18-0025 Total the discounted amount by the 0= No 0 519
discount time (for each rate) (not
available)
18-0026 Fee type when each fee rate is totaled 0= Parking fee / 1= Discounted fee (including the fee by prepaid card) 2 520
/ 2= Discounted fee (not including the fee by prepaid card)
18-0027 The total tax amount is included in the 0= No / 1= Yes 1
total cash sales amount, or not
18-0028 Print entry1 and entry2 on total print 0= No / 1= Yes 0 521
18-0029 Print exit1 and exit2 on total print 0= No / 1= Yes 0
18-0030 Print the current number of vehicles 1 and 0= No / 1= Yes 0
2 on total print
18-0031 Print the number of swallowed pass card 0= No / 1= Yes 0
on total print
18-0032 Print the number of swallowed store 0= No / 1= Yes 0 X
discount ticket on total print
18-0033 Print the number of used service ticket on 0= No / 1= Yes 0
total print
18-0034 Print the number of swallowed prepaid 0= No 0
card on total print (not available)

- 37 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


18-0035 Print the number of swallowed coupon 0= No 0
ticket on total print (not available)
18-0036 Store discount print format 0= Print store number-wise 0 X
1= Print total of store 1-100
3= Print total of all stores
4= Print total of store 1-100, and store number-wise
6= Print total of all stores, and store number-wise
18-0037 Discount ticket print format (not 0= Print discount type-wise 0 X
available)
18-0038 Total print 0= Not print / 1= Only for journal / 2= Only for receipt 3
3= Journal and receipt both
18-0039 Point reduction for Points card (not 0= No 0 X
available)

- 38 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-19. Total Print Setting


Address Item Setting Range Default 77 79
19-0001 1st item of total print [The printing contents] 2 add 493
19-0002 2nd item of total print < common use for paystation and fee computer > 98 493
19-0003 3rd item of total print 00= Not used 3 494
19-0004 4th item of total print 01= Logo 4 494
19-0005 5th item of total print 02= Header (Receipt printing only) 5 495
19-0006 6th item of total print 03= Title (machine no, total title, sequential no, issued date, operator 6 495
19-0007 7th item of total print no.) 7 496
19-0008 8th item of total print 04= Total cash sale amount 8 496
19-0009 9th item of total print 05= Total discount amount 9 497
06= Total sales amount
19-0010 10th item of total print 102 497
07= Total tax amount
19-0011 11th item of total print 104 498
08= Total no. of payments
19-0012 12th item of total print 09= Total Entered/exited no. of vehicles. 103 498
19-0013 13th item of total print 10= No. of lost ticket payments / cash sale amount 105 499
19-0014 14th item of total print 11= No. of payment for each rate / cash amount (2) 106 499
19-0015 15th item of total print 12= No. of discount for each discount key type / amount, or No. of 120 500
19-0016 16th item of total print time discount for each rate / amount (2) 108 500
19-0017 17th item of total print 13= No. of credit card payment / amount 11 501
19-0018 18th item of total print 14= No. of basic prepaid card used / amount (2) 12 501
15= No. of extended1 prepaid card used / amount (2) (3)
19-0019 19th item of total print 16= No. of extended2 prepaid card used / amount (2) (3) 20 502
19-0020 20th item of total print 17= No. of basic coupon ticket or courtesy card used / amount(2) 23 502
19-0021 21st item of total print 18= No. of extended1 coupon ticket or courtesy card used / 0 503
19-0022 22nd item of total print amount(2)(3) 0 503
19-0023 23rd item of total print 19= No. of extended2 coupon ticket or courtesy card used / 0 504
19-0024 24th item of total print amount(2)(3) 0 504
20= No. of each basic service ticket used / amount (2)
19-0025 25th item of total print 21= No. of each extended1 service ticket used / amount (2) (3) 17 505
19-0026 26th item of total print 22= No. of each extended2 service ticket used/ amount (2) (3) 32 505
19-0027 27th item of total print 23= No. of each store discount / amount (2) 119 506
19-0028 28th item of total print 32= No. of each basic pass card used 101 506
19-0029 29th item of total print 33= No. of each extende1 pass card used (3) 110 507
19-0030 30th item of total print 34= No. of each extende2 pass card used (3) 10 507
35= No. of each basic pass card renewed / amount (2)
19-0031 31st item of total print 36= No. of each extended1 pass card renewed / amount (2) (3) 111 508
19-0032 32nd item of total print 37= No. of each extended2 pass card renewed / amount (2) (3) 46 508
19-0033 33rd item of total print 38= No. of credit card surcharge / amount 0 509
19-0034 34th item of total print 40= Category totals (3) 0 509
19-0035 35th item of total print 41= entry time / exit time wise category totals (3) 0 510
42= No. of receipt issued
19-0036 36th item of total print 43 510
43= No. of payments within service time (3)
19-0037 37th item of total print 44= No. of payments within lag time (3) 44 511
19-0038 38th item of total print 45= No. of payments with forced antipass OFF (3) 45 511
19-0039 39th item of total print 46= No. of manual key input payments (3) 0 512
19-0040 40th item of total print 47= Sequential no. information (3) 0 512
19-0041 41st item of total print 60= total amount of Surcharge (3) 42 513
61= No. of each basic event card (one time pass card) used (2)
19-0042 42nd item of total print 122 513
62= No. of each extended1 event card (one time pass card) used (2)
19-0043 43rd item of total print (3) 47 514
19-0044 44th item of total print 63= No. of each extended2 event card (one time pass card) used (2) 0 514
19-0045 45th item of total print (3) 116 515
19-0046 46th item of total print 64= Transportation Card (Korea) No. of payment and amount 117 515
19-0047 47th item of total print 65= Proton Card (Belgium) No. of payment and amount 114 516
66= Period Card (Korea) No. of payment and amount
19-0048 48th item of total print 67= - Total number of unauthorized transaction and amount for 115 516
19-0049 49th item of total print parking area 112 517
19-0050 50th item of total print - Total number of forced exit transaction and amount for 113 517
parking area
- Sales data for each parking spot
- Number of transaction for each parking spot
- Number of unauthorized transaction and amount for
each parking spot
- Number of forced exit transaction and amount for each parking
spot
(These items are applied for NT7600F only)
68= Total number and amount of Switch Card payment
69= Multiple tax amount
70= Online discount amount
71= POS discount amount

- 39 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


19-0051 51st item of total print 107
19-0052 52nd item of total print 73= ISO card discount amount 0
19-0053 53rd item of total print 74= Number input discount amount (AKC) 40
19-0054 54th item of total print 75= Complimentary ticket (basic) usage (2) 98
19-0055 55th item of total print 76= Complimentary ticket (extended 1) usage (2)(3) 0
19-0056 56th item of total print 77= Complimentary ticket (extended 2) usage (2)(3) 0
19-0057 57th item of total print 78= Periodic card (extended 1) usage (2)(3) 0
19-0058 58th item of total print 79= Periodic card (extended 2) usage (2)(3) 0
19-0059 59th item of total print 80= No. of barcode discount / amount 0
81= Total number of paid ticket issue and canceled lost ticket issue
19-0060 60th item of total print 0
(3)
19-0061 61st item of total print 0
98= partition line
19-0062 62nd item of total print 99= Space 99
19-0063 63rd item of total print 201
19-0064 64th item of total print < For paystation > 202
19-0065 65th item of total print 101= No. of short change / amount 203
19-0066 66th item of total print 102= Total amount in safe 204
19-0067 67th item of total print 103= Amount in note safe / no. of each notes 1-4 in note safe 205
19-0068 68th item of total print 104= Amount in coin safe / no. of each coins in note safe 206
19-0069 69th item of total print 105= Total received / ejected amount of the coin hopper 207
19-0070 70th item of total print 106= Received / ejected amount of each coin hopper 209
19-0071 71st item of total print 107= Current amount / number of coins in coin hoppers (3) 210
19-0072 72nd item of total print 108= Amount / numbers of dispensed note 99
19-0073 73rd item of total print 109= Current amount / number of notes in note dispenser 251
19-0074 74th item of total print 110= No. of cancelled payment / cash sales amount 0
19-0075 75th item of total print 111= No. of semi automatic payment / amount 0
19-0076 76th item of total print 112= Filled change amount (3) 0
19-0077 77th item of total print 113= Coin hopper inventory amount (3) 0
114= No. of hopper total (3)
19-0078 78th item of total print 0
115= No. of note dispenser total (3)
19-0079 79th item of total print 0
116= No. of coin safe total (3)
19-0080 80th item of total print 0
117= No. of note safe total (3)
19-0081 81st item of total print 118= No. of operator operation (3) 0
19-0082 82nd item of total print 119= Amount of the given change (3) 0
19-0083 83rd item of total print 120= Amount of the received note / no. of each received notes 1-4 0
19-0084 84th item of total print (3) 0
19-0085 85th item of total print 121= No. of swallowed receipt (in case of receipt issued with the 0
19-0086 86th item of total print ticket) (3) 0
19-0087 87th item of total print 122= No. of issued claim check (3) 0
19-0088 88th item of total print 123= No. of forced exit vehicles (3) 0
19-0089 89th item of total print 124= No. of exited vehicles when the gate keep opened (3) 0
19-0090 90th item of total print 125= No. of exited vehicles when no payment mode (3) 0
19-0091 91st item of total print 0
19-0092 92nd item of total print <TF-7900/TF-5620 multiple totals printing> 0
19-0093 93rd item of total print 201= Total received amount 0
19-0094 94th item of total print 202= Total dispensed amount 0
19-0095 95th item of total print 203= No. of deposit received and refunded / amount 0
19-0096 96th item of total print 204= No. of misc. key used / amount (2) 0
19-0097 97th item of total print 205= refunded amount 0
19-0098 98th item of total print 206= No. of void key used 0
207= No. of insufficient payment / credit amount
19-0099 99th item of total print 0
209= No. of manual pass card used.
19-0100 100th item of total print 0
210= No. of manual payment
221= No. of complimentary ticket payment
251= amount dispensed from the reserve part

(1): When the value is 0, not printed, irrespective of the settings.


(2): In case [Print when data is 0] is set [Not print], and in case the
value is 0, then not print.
(3): Not print in case of the multiple total

- 40 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-20. Category Totals Setting (Important: Take Total Print before


Change the Setting)
Address Item Setting Range Default 77 79
20-0001 Type of category totals 0= No category totals. 0 400
1= No. of vehicles total according to parked time duration
2= No. of vehicles total and fee total according to parked time
duration
3= No. of vehicles total according to the fee
4= No. of vehicles total and fee total according to the fee
5= No. of payment total according to the entry time
6= No. of payment total according to the paid time.
7= No. of payment total according to the entry time and paid time
8= No. of payment total according to the exit time.
9= No. of payment total according to the entry time and exit time
20-0002 No. of the category 1-48= 1-48 categories 0 400
20-0003 1st category [In case of type of category totals= 1, 2] 0 401
20-0004 2nd category 0= No category 0 402
20-0005 3rd category 1-9999= 10-99990 minutes 0 403
20-0006 4th category [In case of type of category totals= 3, 4] 0 404
20-0007 5th category 0= No category. 0 405
20-0008 6th category 1-99999=10-999990 yen 0 406
20-0009 7th category [In case of type of category totals= 5, 6, 7, 8, 9] 0 407
20-0010 8th category 0-2359=0:00-23:59 0 408
20-0011 9th category 0 409
[Notes]
20-0012 10th category 0 410
* In case of type of category totals= 1-4
20-0013 11th category 0 411
If you set
20-0014 12th category The 1st category= 0010 and 0 412
20-0015 13th category The 2nd category= 0020, 0 413
20-0016 14th category 1st category will be 0-100 (yen , minute) and 0 414
20-0017 15th category 2nd category will be 101-200 (yen , minute). 0 415
20-0018 16th category 0 416
20-0019 17th category * In case of type of category totals= 5-9 0 417
20-0020 18th category If you set No. of the category= 2, 0 418
20-0021 19th category The 1st category= 0000 and 0 419
20-0022 20th category The 2nd category= 0100, 0 420
20-0023 21st category 1st category will be 1:01-0:00 and 0 421
20-0024 22nd category 2nd category will be 0:01-1:00. 0 422
20-0025 23rd category 0 423
20-0026 24th category 0 424
20-0027 25th category 0
20-0028 26th category 0
20-0029 27th category 0
20-0030 28th category 0
20-0031 29th category 0
20-0032 30th category 0
20-0033 31st category 0
20-0034 32nd category 0
20-0035 33rd category 0
20-0036 34th category 0
20-0037 35th category 0
20-0038 36th category 0
20-0039 37th category 0
20-0040 38th category 0
20-0041 39th category 0
20-0042 40th category 0
20-0043 41st category 0
20-0044 42nd category 0
20-0045 43rd category 0
20-0046 44th category 0
20-0047 45th category 0
20-0048 46th category 0
20-0049 47th category 0
20-0050 48th category 0

- 41 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 T79


20-0051 Category totals according to the time 0= No category totals. (Settable only 0, 5-9) 0
(1hour each, and 24 categories fixed.) 5= No. of payment total according to the entry time
6= No. of payment total according to the paid time.
7= No. of payment total according to the entry time and paid time
8= No. of payment total according to the exit time.
9= No. of payment total according to the entry time and exit time
20-0052 Adding to the category totals (payment 0=No / 1= Yes 1
with A rate)
20-0053 Adding to the category totals (payment 0=No / 1= Yes 1
with B rate)
20-0054 Adding to the category totals (payment 0=No / 1= Yes 1
with C rate)
20-0055 Adding to the category totals (payment 0=No / 1= Yes 1
with D rate)
20-0056 Adding to the category totals (payment 0=No / 1= Yes 1
with E rate)
20-0057 Adding to the category totals (payment 0=No / 1= Yes 1
with F rate)
20-0058 Adding to the category totals (payment 0=No / 1= Yes 1
with G rate)
20-0059 Adding to the category totals (payment 0=No / 1= Yes 1
with H rate)
20-0060 Adding to the category totals (payment 0=No / 1= Yes 1
with I rate)
20-0061 Adding to the category totals (payment 0=No / 1= Yes 1
with J rate)
20-0062 Adding to the category totals (payment 0=No / 1= Yes 1
with K rate)
20-0063 Adding to the category totals (payment 0=No / 1= Yes 1
with L rate)
20-0064 Adding to the category totals (payment 0=No / 1= Yes 1
with the parking ticket)
20-0065 Adding to the category totals (payment 0=No / 1= Yes 1
with the lost ticket)
20-0066 Adding to the category totals (payment 0=No / 1= Yes 1
with the pass card)
20-0067 Adding to the category totals when the 0=No / 1= Yes 1
gate was opened by external signal
(forced open, keep open, gate open)
20-0068 Adding to the category totals at the time of 0=No / 1= Yes 1
no payment mode
20-0069 Total is calculated with the service time 0= No 0
deduction (not available)
20-0070 Total is calculated with the grace time 0= No 0
deduction (not available)
20-0071 Printing for the category unknown items 0= No / 1= Yes 0
20-0072 Entry time judgment criteria of parking in 0= Request from the entry data received through communication 1
time wise classification. 1= request from the payment data
(0: available when all rate is counted)

- 42 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-21. Receipt Print Setting


Address Item Setting Range AE AKC Default 77 79
(ATAS)
21-0001 Receipt printing on Journal, Receipt 0= Journal records even if fee is 0, receipt is issued even if fee is 0. 0 63
1= Journal records even if fee is 0, receipt is issued when fee isn’t 0.
2= Journal records even if fee is 0, receipt is issued when the
received cash amount is not 0.
3= Journal records when fee isn’t 0, receipt is issued even fee is 0.
4= Journal records when fee is not 0, receipt is issued when fee is
not 0.
5= Journal records when fee is not 0, receipt is issued when the
received cash amount is not 0.
6= Journal records when the received cash amount is not 0, receipt
is issued even if fee is 0.
7= Journal records when the received cash amount is not 0, receipt
is issued when fee is not 0.
8= Journal records when the received cash amount is not 0, receipt
is issued when the received cash amount is not 0.
9= Journal records even if fee is 0, receipt is issued when the
received cash amount is not 0 or credit card payment amount is
not 0. (AKC)
10= Journal records when fee isn’t 0,receipt is issued when the
received cash amount is not 0 or credit card payment amount is
not 0. (AKC)
11= Journal records when the received cash amount is not 0, receipt
is issued when the received cash amount is not 0 or credit card
payment amount is not 0. (AKC)
21-0002 Title of the receipt 0= Issue all with " Receipt ". 1
1= In case of the credit card payment, issue with "Full Statement“.
2= In case of the credit card payment without any cash, issue with
"Full Statement“.
21-0003 Pass card validity period printing on the 0= No / 1= Yes 1
receipt
21-0004 1st item of receipt [Record or print object] 1 1 1
21-0005 (record or print object for receipt) 0= not record or print 0
21-0006 (record or print object for claim check) 1= only for journal 0
21-0007 2nd item of receipt 2= only for receipt 2 2 2 431
21-0008 (record or print object for receipt) 3= both 2 2 2 431
21-0009 (record or print object for claim check) [The printing contents] 2 2 2 431
21-0010 3rd item of receipt 0= not used 3 3 3 432
21-0011 (record or print object for receipt) 2= Header (Receipt printing only) 3 3 3 432
3= title
21-0012 (record or print object for claim check) 3 3 3 432
4= payment information
21-0013 4th item of receipt 99 99 99 433
5= ticket information
21-0014 (record or print object for receipt) 2 2 2 433
6= operator / administrator No.
21-0015 (record or print object for claim check) 7= entry time 2 2 2 433
21-0016 5th item of receipt 8= exit (or payment) time 4 4 4 434
21-0017 (record or print object for receipt) 9= parked time 3 3 3 434
21-0018 (record or print object for claim check) 10= parking fee 3 3 3 434
21-0029 6th item of receipt 11= pass card classification, contract No 5
21-0040 (record or print object for receipt) 12= service ticket 3
21-0021 (record or print object for claim check) 13= store discount 3 3 3 435
21-0022 7th item of receipt 15= prepaid card 6 6 6 436
21-0023 (record or print object for receipt) 16= coupon ticket / courtesy ticket 3 3 3 436
21-0024 (record or print object for claim check) 18=previous time discount (re-payment after 0 0 0 436
21-0025 8th item of receipt payment cancelled) 7 7 7 437
21-0026 (record or print object for receipt) 19=previous fee discount (re-payment after 3 3 3 437
21-0027 (record or print object for claim check) payment cancelled) 0 0 0 437
21-0028 9th item of receipt 20=previous % discount (re-payment after 8 8 8 438
21-0029 (record or print object for receipt) payment cancelled) 3 3 3 438
21-0030 (record or print object for claim check) 21= taxable amount 3 3 3 438
22= tax
21-0031 10th item of receipt 9 9 9 439
23= credit card
21-0032 (record or print object for receipt) 2 2 2 439
24= total amount
21-0033 (record or print object for claim check) 25= paid amount 0 0 0 439
21-0034 11th item of receipt 26= change amount 10 10 10 440
21-0035 (record or print object for receipt) 27= out of change information 3 3 3 440
21-0036 (record or print object for claim check) 28= footer 0 0 0 440
21-0037 12th item of receipt 30= credit card surcharge amount 11 11 11 441
21-0038 (record or print object for receipt) 31= event card (one time pass card) class, 3 3 3 441
21-0039 (record or print object for claim check) contract No. 0 0 0 441
21-0040 13th item of receipt 32= previous paid amount in case of re-payment 31 31 31 442
21-0041 (record or print object for receipt) 33= license plate information 3 3 3 442
21-0042 (record or print object for claim check) 36= credit card company 0 0 0 442

- 43 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC Default 77 79


(ATAS)
21-0043 14th item of receipt 12 320 12 443
21-0044 (record or print object for receipt) 37= credit card number 3 3 3 443
21-0045 (record or print object for claim check) 38= credit card slip number 0 0 0 443
21-0046 15th item of receipt 39= credit card authorization number 13 12 13 444
21-0047 (record or print object for receipt) 41= penalty payment 3 3 3 444
21-0048 (record or print object for claim check) 89= period guidance message when pass card 0 0 0 444
21-0049 16th item of receipt is renewed 15 13 15 445
21-0050 (record or print object for receipt) 90-93= fixed messages 1-4 in case of out of 3 3 3 445
21-0051 (record or print object for claim check) change 0 0 0 445
94-97= fixed messages 1-4 98= partition line
21-0052 17th item of receipt 16 15 16 446
99= space
21-0053 (record or print object for receipt) 3 3 3 446
300= Transportation Card amount
21-0054 (record or print object for claim check) 301= Transportation Card company name 0 0 0 446
21-0055 18th item of receipt 302= Transportation Card number 32 16 32 447
21-0056 (record or print object for receipt) 303= Slip number 3 3 3 447
21-0057 (record or print object for claim check) 304= Authorization number 0 0 0 447
21-0058 19th item of receipt 305= T-Money card amount 18 32 18 448
21-0059 (record or print object for receipt) 306= T-Money card 3 3 3 448
21-0060 (record or print object for claim check) 310= Paid amount by Proton 0 0 0 448
21-0061 20th item of receipt 311= Title (“PROTON”) 19 18 19 449
21-0062 (record or print object for receipt) 312= Proton Card No. 3 3 3 449
21-0063 (record or print object for claim check) 313= Proton payment No. 0 0 0 449
21-0064 21st item of receipt 314= Chip & PIN payment (AE) 20 19 20 450
21-0065 (record or print object for receipt) 320= Period Card class, card No. 3 3 3 450
21-0066 (record or print object for claim check) 330 = Pay-in-Advance Intended Exit Time 0 0 0 450
21-0067 22nd item of receipt (AE only) 99 20 99 451
21-0068 (record or print object for receipt) 340 = Parking spot number (AKC: NT7600F only) 2 3 2 451
21-0069 (record or print object for claim check) 350 = Credit card authorization number 0 0 0 451
(“AuthCode”)
21-0070 23rd item of receipt 21 99 21 452
351= Complimentary ticket
21-0071 (record or print object for receipt) 3 2 3 452
360 = Switch Card (Title) (AE only)
21-0072 (record or print object for claim check) 361 = Switch card Issue Number (AE only) 0 0 0 452
21-0073 24th item of receipt 362 = Paid Amount with Switch card (AE only) 22 21 22 453
21-0074 (record or print object for receipt) 370= Online discount amount 3 3 3 453
21-0075 (record or print object for claim check) 371= POS discount amount 0 0 0 453
21-0076 25th item of receipt 372= Credit card discount amount 36 22 36 454
21-0077 (record or print object for receipt) 373= ISO card discount 3 3 3 454
21-0078 (record or print object for claim check) 374= Number input discount (AKC) 0 0 0 454
21-0079 26th item of receipt 375= Barcode discount (AKC) 37 36 37 455
21-0080 (record or print object for receipt) 3 3 3 455
21-0081 (record or print object for claim check) (AIT only) 0 0 0 455
21-0082 27th item of receipt 380= TAIWAN unified receipt 38 37 38 456
21-0083 (record or print object for receipt) 381= Taxpayer number 3 3 3 456
21-0084 (record or print object for claim check) 0 0 0 456
21-0085 28th item of receipt 350 38 39 457
21-0086 (record or print object for receipt) 3 3 3 457
21-0087 (record or print object for claim check) 0 0 0 457
21-0088 29th item of receipt 23 39 23 458
21-0089 (record or print object for receipt) 3 3 3 458
21-0090 (record or print object for claim check) 0 0 0 458
21-0091 30th item of receipt 98 23 98 459
21-0092 (record or print object for receipt) 3 3 3 459
21-0093 (record or print object for claim check) 0 0 0 459
21-0094 31st item of receipt 24 98 24
21-0095 (record or print object for receipt) 3 3 3
21-0096 (record or print object for claim check) 3 0 3
21-0097 32nd item of receipt 25 24 25
21-0098 (record or print object for receipt) 3 3 3
21-0099 (record or print object for claim check) 3 3 3
21-0100 33rd item of receipt 26 25 26
21-0101 (record or print object for receipt) 3 3 3
21-0102 (record or print object for claim check) 3 3 3
21-0103 34th item of receipt 94 26 94
21-0104 (record or print object for receipt) 2 3 2
21-0105 (record or print object for claim check) 0 3 0
21-0106 35th item of receipt 98 94 98
21-0107 (record or print object for receipt) 2 2 2
21-0108 (record or print object for claim check) 0 0 0
21-0109 36th item of receipt 27 98 27
21-0110 (record or print object for receipt) 3 2 3
21-0111 (record or print object for claim check) 3 0 3

- 44 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC Default 77 79


(ATAS)
21-0112 37th item of receipt 90 27 90
21-0113 (record or print object for receipt) 0 3 0
21-0114 (record or print object for claim check) 2 3 2
21-0115 38th item of receipt 28 90 28
21-0116 (record or print object for receipt) 0 0 0
21-0117 (record or print object for claim check) 0 2 0
21-0118 39th item of receipt 89 28 89
21-0119 (record or print object for receipt) 2 0 2
21-0120 (record or print object for claim check) 0 0 0
21-0121 40th item of receipt 0 89 0
21-0122 (record or print object for receipt) 0 2 0
21-0123 (record or print object for claim check) 0 0 0
21-0124 41st item of receipt 0 0 0
21-0125 (record or print object for receipt) 0 0 0
21-0126 (record or print object for claim check) 0 0 0
21-0127 42nd item of receipt 0 0 0
21-0128 (record or print object for receipt) 0 0 0
21-0129 (record or print object for claim check) 0 0 0
21-0130 43rd item of receipt 0 0 0
21-0131 (record or print object for receipt) 0 0 0
21-0132 (record or print object for claim check) 0 0 0
21-0133 44th item of receipt 0 0 0
21-0134 (record or print object for receipt) 0 0 0
21-0135 (record or print object for claim check) 0 0 0
21-0136 45th item of receipt 0 0 0
21-0137 (record or print object for receipt) 0 0 0
21-0138 (record or print object for claim check) 0 0 0
21-0139 46th item of receipt 0 0 0
21-0140 (record or print object for receipt) 0 0 0
21-0141 (record or print object for claim check) 0 0 0
21-0142 47th item of receipt 0 0 0
21-0143 (record or print object for receipt) 0 0 0
21-0144 (record or print object for claim check) 0 0 0
21-0145 48th item of receipt 0 0 0
21-0146 (record or print object for receipt) 0 0 0
21-0147 (record or print object for claim check) 0 0 0
21-0148 49th item of receipt 0 0 0
21-0149 (record or print object for receipt) 0 0 0
21-0150 (record or print object for claim check) 0 0 0
21-0151 50th item of receipt 0 0 0
21-0152 (record or print object for receipt) 0 0 0
21-0153 (record or print object for claim check) 0 0 0

- 45 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-22. Printing Related Settings


Address Item Setting Range Default 77 79
22-0001 Width between lines 0-24= 0-24 Pitch 4
22-0002 Print when the receipt is cut 0= None / 1= Print Logo / 2= Print Header / 3= Cut and print Logo 1
22-0003 No. of header lines 0-4= 0-4 lines 4
22-0004 No. of footer lines 0
22-0005 Letter size of the header 1st line 0= standard / 1= horizontally double / 2= vertically double / 3= 0
22-0006 2nd line horizontally and vertically double 0
22-0007 3rd line 0
22-0008 4th line 0
22-0009 Letter size of the footer 1st line 0
22-0010 2nd line 0
22-0011 3rd line 0
22-0012 4th line 0
22-0013 Journal recording for the sub total operation 0= No / 1= Yes 0
22-0014 Journal recording of the total operation 0
22-0015 Journal recording of the operator or 0
management operation
22-0016 Journal recording of shut down and restart 1
22-0017 Journal recording of Door open or closed  If 22-0021= 1, 22-0017 has to be 0. 1
22-0018 Unused 0
22-0019 Journal recording of the operation monitor 0
record
22-0020 Journal recording of the monitor record 0
22-0021 Journal recording of the alarm 0
22-0022 Journal recording of the error (trouble) 1
22-0023 Journal recording of the cancelled payment 1
22-0024 Receipt Printer (except AKC) 0= Standard Printer (current) / 1= New Printer (LTPF247F) 0
22-0025 Unused 0
22-0026 Unused 0
22-0027 Unused 0
22-0028 Unused 0
22-0029 Unused 0
22-0030 Re-printing of the previous total 0= No / 1= Yes 1

- 46 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-23. Paystation Specific Settings


Address Item Setting Range Default 77 79
23-0001 Gate control error process 0= No / 1= Yes 0
23-0002 Door vibration sensor 0= Not used / 1= used 0
23-0003 Forced exit mode (1st digit)  0= Always possible / 1= possible when LC1 is ON 1
Forced exit when out of operation (2nd  0= not possible / 1= possible
digit) (valid only for EPS)
23-0004 Exit count signal for forced exit 0= No signal output 0
1-12= follow the signal output setting for A-L rate setting
23-0005 Vehicle waiting time in case of forced 0-300 : 0-300sec. 30
exiting process is done when LC1 is OFF
23-0006 Gate control after forced exiting (available 0= Gate close when LC2 become OFF. 0
when 01-0005 is not 0) 1= Gate does not close (Gate keep open. To close, gate close
button or signal)
23-0007 Non payment mode 0= No / 1= Yes 0
23-0008 Exit count signal for non payment mode 0= No signal output 0
1-12= follow the signal output setting for A-L rate setting
23-0009 The standby mode when no loop 0= always shutter opened 0
1= Shutter opened when payment start signal is ON.
23-0010 Gate close mode when LC1=ON (1st digit)  0= Gate close if the gate is opened when LC1 is ON / 1=Not close 11 X
Payment when LC2=ON (2nd digit)  0= Payment is not possible when LC2=ON (idle screen)
1= Payment is possible when LC2=ON (ticket insertion screen)
23-0011 Gate open timing 0= Open when payment completed 0 X
1= Open when pass card is pulled out
23-0012 Rate change signal 0= Rate is changed by rate change signal when the fee is displayed 0 X
1= Rate is changed by rate change signal when LC1 is ON
(Only EPS)
23-0013 Rate change when signal1=ON, 2=OFF 0= No change / 1-12= A-L rate 0 X
23-0014 Rate change when signal1=OFF, 2=ON 0= No change / 1-12= A-L rate 0 X
23-0015 Rate change when signal1=ON, 2=ON 0= No change / 1-12= A-L rate 0 X
23-0016 Exit warning timer 0-99= 0-99 sec. 30 X
23-0017 Idle screen re-display timer 1-99= 1-99 seconds 10
23-0018 The payment completion guidance timer 1-99= 1-99 seconds (including semi-automatic mode and shutter 30
(effective only in case of no loop) keep opening mode)
23-0019 Unused 0
23-0020 Semi automatic payment mode 0= No / 1= Yes 1
23-0021 Manual payment mode 0= No / 1= Yes 1
23-0022 Paid ticket handling (EPS, No Loop) (not 0= Swallow 0 X
available)
23-0023 In operation / Out of operation selection 0= Remain In operation / 1= Switch out of operation 0 23
when no coin change is available
23-0024 Claim check or receipt issuing in case of 0= Automatically issue the claim check. 0 23
the out of change 1= Automatically issue the receipt with short change amount printed.
2= Not automatically issue.
23-0025 In / Out of operation when no banknote 0= Remain In operation / 1= Switch out of operation 0
change is available
23-0026 The maximum refund amount for inserted 0= unlimited 0 19
banknotes in case of the cancelled 1-999999=1-999999 yen
payment
23-0027 The maximum coin change amount for 0- 999999 yen 1999 60
inserted banknotes in case of normal
payment
23-0028 Acceptance when the banknotes was 0= No / 1= Yes 0
inserted while the change is insufficient for
the inserted banknote.
23-0029 Handling the inserted banknotes in case of 0= Return with coins. 1
the cancelled payment 1= Return with banknotes
2= Return with coins and banknotes
3= If same note is there in the dispenser, return in that note.
Otherwise don’t return.
4= Don’t return
23-0030 In/Out of operation during note safe full 0= Remain In operation (don’t accept notes) 0
1= Switch out of operation
23-0031 Receipt (valid only for EPS) 0 fixed 0
23-0032 Inventory mode 0= Manual selection change slot or safe / 1= Dispense to change slot 0
/ 2= Store in safe.
23-0033 Printing of operator number 0= No / 1= Yes 1
23-0034 Time specified switching In / out of 0= No / 1= Yes 0
operation
23-0035 Operation start time 0-2359= 0:00-23:59 0
23-0036 Operation end time 0-2359= 0:00-23:59 0
23-0037 Time specified voice announcement 0= No / 1= Yes 0
volume switching
23-0038 Volume 1start time 0-2359= 0:00-23:59 0

- 47 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


23-0039 Volume 1 end time 0-2359= 0:00-23:59 0
23-0040 Coin collector block (not available) 0=No 0 X
23-0041 Bank note dispenser mount 0= No / 1= Yes 0 65
23-0042 Coin change conveyance motor control 0 = 10 sec operation simultaneously with the Dispensing 2 X
(valid only for the terminal with coin 1 = 10 sec operation after completion of the Dispensing
change conveyer) 2 = 3 sec operation ➝ 2 sec stop ➝ 5 sec operation after
completion of the Dispensing
23-0043 Exit count in case of the gate keep opened 0= Not count 0
1-12= follow the signal output setting for A-L rate setting (current no.
of vehicle, exit count only)
23-0044 Automatic Issue of Receipt during 0= No / 1= Yes 0
Payment
23-0045 The maximum banknote change amount 0= Unsed / 1- 999999 yen 1999
for inserted banknotes in case of normal
payment
23-0046 Ticket feeder unit install (for lost ticket 0= No / 1= Yes 0
issue)
23-0047 Out of ticket (left): signal output or alarm 0= No / 1= Yes 0
sending to host
23-0048 Out of ticket (right): signal output or alarm 0= No / 1= Yes 0
sending to host
23-0049 Ticket void motor 0= Not use / 1= Use 0
23-0050 Payment Cancel Timer for Lost 0= No Timer 30
Transaction 1-180= 1-180 sec
23-0051 Money management data send timing 0= Do not send 0
(APS) 1= Send after payment complete or cancel
23-0052 Money management data send timing 2= Send after total complete 3
(Online) 3= Send after payment complete or cancel, or total complete
23-0053 Passcard APS-NET format 0= 8 types passcard / 1= 15 types passcard 0
23-0054 Fee charge when entry and exit time is 0= No / 1= Yes 0
same
23-0055 Print setting when parking time is 0 min 0= Yes / 1= No 0
ute
23-0056 0
23-0057 0
23-0058 0
23-0059 0
23-0060 0
23-0061 Cancel payment automatically 0= No / 1= Yes 0
when LC1 is OFF (EPS)
23-0062 Cancel payment automatically 0= No / 1= Yes 0
when motion sensor is OFF (CPS)
23-0063 Automatic cancel timer 1-1800= 0.1-180.0 sec / 0=No timer 0
23-0064 Return ticket when payment is canceled 0= Yes / 1= No (retrieve) 0
automatically
23-0065 Refund when payment is canceled 0= Yes / 1= No 2
automatically
23-0066 Automatic cancel target 0= All tupes of ticket / 1= Magstripe ticket / 2= LPR payment (Online) 0
23-0067 0
23-0068 0
23-0069 0
23-0070 0

- 48 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-24. Denomination Settings


Address Item Setting Range AE AKC Default 77 79
(ATAS)
24-0001 Hopper 1 denomination 0= Not used 10 10 10 24
24-0002 Hopper 2 denomination 1-999999= 1-999999 yen 20 50 20 25
24-0003 Hopper 3 denomination 50 100 50 26
24-0004 Hopper 4 denomination Same denomination for 2 hoppers is possible. 100 500 100 27
24-0005 Unused 0 0 0 X 28
24-0006 Unused 0 0 0 X 29
24-0007 The read coin 1 denomination 0= Not used 10 10 10 36
(see below table for 6 coin reading function) 1-999999= 1-999999 yen
24-0008 The read coin 2 denomination 20 50 20 37
24-0009 The read coin 3 denomination 50 100 50 38
24-0010 The read coin 4 denomination 100 500 100 39
24-0011 The read coin 5 denomination 0 0 0 40
(go to coin safe directly)
24-0012 The read coin 6 denomination 0 0 0 41
(go to coin safe directly)
24-0013 The read note 1 denomination 0= Not used 500 1000 100 42
24-0014 The read note 2 denomination 1-999999= 1-999999 yen 1000 5000 200 43
24-0015 The read note 3 denomination 2000 10000 500 44
24-0016 The read note 4 denomination 5000 0 1000 45
24-0017 Banknote dispenser Note 1 denomination 0= Not used 500 1000 100 65
24-0018 Banknote dispenser Note 2 denomination 1-999999= 1-999999 yen 0 0 0 add 66
24-0019 Banknote dispenser Note 3 denomination 0 0 0 add
(for future use) Same denomination for note 1 and note 2 is possible.
24-0020 Hopper1 Function Recycle/Spare 0 = Recycle / 1 = Spare 0 0 0 add
(Example) 0001 means as below.
Hopper1: Spare
Hopper2: Recycle
Hopper3: Recycle
Hopper4: Recycle
24-0021 The read coin 1 denomination coin point 0-99= 0-99 point 12 13 9 0032
24-0022 The read coin 2 denomination coin point (Refer coin point table) 17 12 16 0032
24-0023 The read coin 3 denomination coin point 22 15 25 0033
24-0024 The read coin 4 denomination coin point 20 22 25 0033
24-0025 The read coin 5 denomination coin point 23 22 25 X
24-0026 The read coin 6 denomination coin point 23 22 25
24-0027 The number of points at coin safe nearly full 0-99999= 0-99999 point 22400 22400 22400 0031
warning.
24-0028 The number of points at coin safe full 28000 28000 28000
24-0029 The number of banknotes for note safe 0-999= 0-999 notes 500 500 500 0051
nearly full warning.

[ 8 coin reading ]
Read coin Hopper 1 function
Nr. of read coin denomination
denomination Spare / Recycle
Hopper 1
(24-0011)
Function denomination
(24-0012) Recy- Disp-
(24-0001) (24-0020) Func. Read Spare
(37-0001) cle ence
(37-0002)
Recy-
Standard (4 Coins) = 0 > 0 0 4 4 - 4
cle
8 Coins / 3 recycle
hoppers / 1 spare > 0 > 0 1 Spare 8 3 1 4
hopper
8 Coins / 4 recycle Recy-
> 0 > 0 0 8 4 - 4
hoppers cle
24-0011, 24-0012, 37-0001 and 37-0002 denomination goes to the coin safe directly.

- 49 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-25. Money Management Settings


Address Item Setting Range Default 77 79
25-0001 Money management 0= No / 1= Yes 1
25-0002 Coin count automatic addition during 0= No 0
cassette supplement (not available)
25-0003 Hopper 1 default number of coin 0-999 200
25-0004 Number of coin for the nearly out 30
of change warning
25-0005 Number of coin full 550
25-0006 cassette supplement no. 0
(not available)
25-0007 in case it becomes below no. for 0= handle as still change is available 1
nearly out of change warning 1= handle as nearly out of change
25-0008 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0009 Hopper 2 default number of coin 0-999 200
25-0010 Number of coin for the nearly out 30
of change warning
25-0011 Number of coin full 650
25-0012 cassette supplement no. 0
(not available)
25-0013 in case it becomes below no. for 0= handle as still change is available 1
nearly out of change warning 1= handle as nearly out of change
25-0014 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0015 Hopper 3 default number of coin 0-999 200
25-0016 Number of coin for the nearly out 30
of change warning
25-0017 Number of coin full 600
25-0018 cassette supplement no. 0
(not available)
25-0019 in case it becomes below no. for 0= handle as still change is available 1
nearly out of change warning 1= handle as nearly out of change
25-0020 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0021 Hopper 4 default number of coin 0-999 200
25-0022 Number of coin for the nearly out 30
of change warning
25-0023 Number of coin full 350
25-0024 cassette supplement no. 0
(not available)
25-0025 in case it becomes below no. for 0= handle as still change is available 1
nearly out of change warning 1= handle as nearly out of change
25-0026 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0027 Unused 0 X
25-0028 Unused 0 X
25-0029 Unused 0 X
25-0030 Unused 0 X
25-0031 Unused 0 X
25-0032 Unused 0 X
25-0033 Hopper 1 coins conveyance into the coin 0= once / 1= twice / 2= 3 times 0
safe when the hopper is full (15 coins are conveyed into the coin safe at once.)
25-0034 Hopper 2 coins conveyance into the coin 0
safe when the hopper is full Note)
25-0035 Hopper 3 coins conveyance into the coin Only 1 denomination is conveyed once into the coin safe at 1 0
safe when the hopper is full payment. 2nd or 3rd conveyance is done at next payment.
25-0036 Hopper 4 coins conveyance into the coin 0
safe when the hopper is full
25-0037 Unused 0
25-0038 Automatic inventory 0= No / 1= conveyed to change slot / 2= conveyed to coin safe 0

- 50 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


25-0039 Note dispenser 1 default number of note 0-999 200 68
25-0040 Number of note for the nearly 40
out of change warning
25-0041 in case it becomes below no. for 0= handle as still change is available 1
nearly out of change warning 1= handle as nearly out of change
25-0042 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0043 Note dispenser 2 default number of note 0-999 0 69
25-0044 Number of note for the nearly 0
out of change warning
25-0045 in case it becomes below no. for 0= handle as still change is available 0
nearly out of change warning 1= handle as nearly out of change
25-0046 when out of change sensor is 0= sensor is not used when nearly out of change 0
activated 1= sensor is used
25-0047 Unused 0
25-0048 Unused 0
25-0049 Unused 0
25-0050 Unused 0
25-0051 Unused 0
25-0052 Unused 0
25-0053 Unused 0
25-0054 Unused 0
25-0055 Condition for out of change 0= Even if only 1 denomination was out, handle as out of change. 0
1= If all denomination was out, handle as out of change.
25-0056 Hopper 1 is an object for out of change 0= No / 1= yes 1 56
25-0057 Hopper 2 is an object for out of change 1 56
25-0058 Hopper 3 is an object for out of change 1 56
25-0059 Hopper 4 is an object for out of change 1 56
25-0060 Unused 0 X 57
25-0061 Unused 0 57
25-0062 Note dispenser 1 is an object for out of 1 57
change
25-0063 Note dispenser 2 is an object for out of 0 57
change
25-0064 Unused 0
25-0065 Unused 0
25-0066 Condition for nearly out of change warning 0= Even if only 1 denomination was out, handle as nearly out of 0
change.
1= If all denomination was out, handle as nearly out of change.
25-0067 Hopper 1 is an object for nearly out of 0= No / 1= yes 1
change warning
25-0068 Hopper 2 is an object for nearly out of 1
change warning
25-0069 Hopper 3 is an object for nearly out of 1
change warning
25-0070 Hopper 4 is an object for nearly out of 1
change warning
25-0071 Unused 0 X
25-0072 Unused 0
25-0073 Note dispenser 1 is an object for nearly 1
out of change warning
25-0074 Note dispenser 2 is an object for nearly 0
out of change warning
25-0075 Unused 0
25-0076 Unused 0

- 51 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-26. Output Signal Setting


Address Item Setting Range Default 77 79
26-0001 Output signal 1 function [Signal type] 49
26-0002 Output signal 1 output time 0= normally OFF state / 1= normally ON state 0
26-0003 Output signal 1 signal type [Output time] (1) Item’s output time (not valid for items without (1)) 0
26-0004 Output signal 2 function 0-65535= 0-65535ms outpu 50
26-0005 Output signal 2 output time [Function] 0
26-0006 Output signal 2 signal type 00= Not used 0
26-0007 Output signal 3 function 01= Payment completed (or exit)1 (1) 15
26-0008 Output signal 3 output time 02= Payment completed (or exit)2 (1) 0
26-0009 Output signal 3 signal type 03= Gate open (1) 0
26-0010 Output signal 4 function 04= Gate closed (1) 28
26-0011 Output signal 4 output time 10= Out of journal paper 0
26-0012 Output signal 4 signal type 11= Nearly out of journal paper warning 0
26-0013 Output signal 5 function 12= Out of receipt paper 0
26-0014 Output signal 5 output time 13= Nearly out of receipt paper warning 0
26-0015 Output signal 5 signal type 14= Out of journal or receipt paper 0
26-0016 Output signal 6 function 15= Nearly out of journal or receipt paper warning 16
26-0017 Output signal 6 output time 16= Trouble 0
26-0018 Output signal 6 signal type 17= In the process of payment (For Left-right control) 0
26-0019 Output signal 7 function 18= Lot full 1 0
26-0020 Output signal 7 output time 19= Lot full 2 0
26-0021 Output signal 7 signal type 22= Exit warning 0
26-0022 Output signal 8 function 23= In operation 0
26-0023 Output signal 8 output time 24= Out of operation 0
26-0024 Output signal 8 signal type 25= Door alarm 0
26-0025 Output signal 9 function 26= Coin safe nearly full warning 0
26-0026 Output signal 9 output time 27= Note safe nearly full warning 0
26-0027 Output signal 9 signal type 28= Coin safe or Note safe nearly full warning 0
26-0028 Output signal 10 function 29= Coin hopper 1 out of change 0
26-0029 Output signal 10 output time 30= Coin hopper 1 nearly out of change warning 0
26-0030 Output signal 10 signal type 31= Coin hopper 2 out of change 0
26-0031 Output signal 11 function 32= Coin hopper 2 nearly out of change warning 0
26-0032 Output signal 11 output time 33= Coin hopper 3 out of change 0
26-0033 Output signal 11 signal type 34= Coin hopper 3 nearly out of change warning 0
26-0034 Output signal 12 function 35= Coin hopper 4 out of change 0
26-0035 Output signal 12 output time 36= Coin hopper 4 nearly out of change warning 0
26-0036 Output signal 12 signal type 37= Reserve hopper 1 out of change 0
26-0037 Unused 38= Reserve hopper 1 nearly out of change warning 0
26-0038 Unused 39= Reserve hopper 2 out of change 0
26-0039 Unused 40= Reserve hopper 2 nearly out of change warning 0
26-0040 Unused 41= Note 1 out of change 0
26-0041 Unused 42= Note 1 nearly out of change warning 0
26-0042 Unused 43= Note 2 out of change 0
26-0043 Unused 44= Note 2 nearly out of change warning 0
26-0044 Unused 45= Note 3 out of change 0
26-0045 Unused 46= Note 3 nearly out of change warning 0
26-0046 Unused 47= Note 4 out of change 0
26-0047 Unused 48= Note 4 nearly out of change warning 0
26-0048 Unused 49= Out of change 0
50= Nearly out of change warning
51= Out of ticket (Left)
52= Out of ticket (Right)
60= Signal accept possible signal when forced exit

- 52 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-27. Input Signal Setting


Address Item Setting Range Default 77 79
27-0001 Input signal 1 function 00= not used 16
27-0002 Input signal 2 function 01= gate closed state 0
27-0003 Input signal 3 function 02= entry signal 1 0
27-0004 Input signal 4 function 03= entry signal 2 0
27-0005 Input signal 5 function 04= exit signal 1 0
27-0006 Input signal 6 function 05= exit signal 2 0
27-0007 Input signal 7 function 06= forced In operation 0
27-0008 Unused 07= forced out of operation 0
08= rate change signal 1
09= rate change signal 2
10= Forced exiting signal
11= gate keep open signal
12= gate open signal
13= gate close signal
14= payment possible signal ( In case of 1 lane - 2 directions )
15= payment in process signal ( for right-and-left control)
16= payment start signal (For starting when no Loop )

- 53 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-28. Management Screen Setting


Address Item Setting Range Default 77 79
28-0001 A1 button item [Level] 1
28-0002 Level 0-4= Access levels 0-4 1
28-0003 A2 button item [Item] 2
28-0004 Level 00= Not used 0
28-0005 A3 button item 01= Parking lot status 3
28-0006 Level 02= Error / warning 0
28-0007 A4 button item 03= Cash check 4
28-0008 Level 04= Clock adjustment 1
28-0009 A5 button item 05= Ticket information 5
28-0010 Level 06= Parking lot space control 0
28-0011 A6 button item 07= In operation / out of service 6
28-0012 Level 08= Status check 0
28-0013 A7 button item 09= Shutter control 7
28-0014 Level 10= Opening hours start / end 0
28-0015 A8 button item 11= Clear password 9
28-0016 Level 12= T Total (T sub total, T total, previous T total) 0
28-0017 A9 button item 13= Gate open / close 10
28-0018 Level 14= Safe check 0
28-0019 A10 button item 15= Payment mode 11
28-0020 Level 16= Pass card in / out 0
28-0021 A11 button item 17= Pass card valid / invalid 0
28-0022 Level 18= Sub total (GT, MT, Multiple T, Multiple GT) 0
28-0023 A12 button item 19= Display adjustment 96
28-0024 Level 20= Voice announcement 0
28-0025 A13 button item 21= Change filling 95
28-0026 Level 22= Antipass 0
28-0027 A14 button item 23= Service time 98
28-0028 Level 24= Return money (payment cancel) 0
28-0029 A15 button item 25= Inventory 99
28-0030 Level 26= Exit alarm output 0
28-0031 A16 button item 28= Pass card invalid day 0
28-0032 Level 29= Special day / period 0
28-0033 A17 button item 30= Rate setting 0
28-0034 Level 31= Pass card valid / invalid 0
28-0035 A18 button item 32= Pass card in / out 0
28-0036 Level 33= Invalid parking ticket 0
28-0037 A19 button item 34= Total (GT, MT, Multiple T, Multiple GT) 0
28-0038 Level 35= Password control 0
28-0039 A20 button item 36= Card issue (Engineer screen only) 0
28-0040 Level 38= Receipt re-print 0
28-0041 A21 button item 39= Online data display 0
28-0042 Level 41= Lost Ticket Issue 0
28-0043 A22 button item 49= Invalid management card setting 0
28-0044 Level 50= DST 0
28-0045 A23 button item 94= (Reserved for ACI) 0
28-0046 Level 95= To Idle screen 0
28-0047 A24 button item 96= To Engineer operation 0
28-0048 Level 97= To First time operation 0
28-0049 A25 button item 98= To Operator operation 0
28-0050 Level 99= To Management operation 0
* Refer to the end of Chapter 28 regarding button numbers.

- 54 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


28-0051 B1 button item [Level] 12
28-0052 Level 0-4= Access levels 0-4 0
28-0053 B2 button item [Item] 15
28-0054 Level 00= Not used 0
28-0055 B3 button item 01= Parking lot status 18
28-0056 Level 02= Error / warning 0
28-0057 B4 button item 03= Cash check 14
28-0058 Level 04= Clock adjustment 0
28-0059 B5 button item 05= Ticket information 17
28-0060 Level 06= Parking lot space control 0
28-0061 B6 button item 07= In operation / out of service 16
28-0062 Level 08= Status check 0
28-0063 B7 button item 09= Shutter control 20
28-0064 Level 10= Opening hours start / end 0
28-0065 B8 button item 11= Clear password 19
28-0066 Level 12= T Total (T sub total, T total, previous T total) 0
28-0067 B9 button item 13= Gate open / close 38
28-0068 Level 14= Safe check 0
28-0069 B10 button item 15= Payment mode 50
28-0070 Level 16= Pass card in / out 0
28-0071 B11 button item 17= Pass card valid / invalid 0
28-0072 Level 18= Sub total (GT, MT, Multiple T, Multiple GT) 0
28-0073 B12 button item 19= Display adjustment 0
28-0074 Level 20= Voice announcement 0
28-0075 B13 button item 21= Change filling 0
28-0076 Level 22= Antipass 0
28-0077 B14 button item 23= Service time 0
28-0078 Level 24= Return money (payment cancel) 0
28-0079 B15 button item 25= Inventory 0
28-0080 Level 26= Exit alarm output 0
28-0081 B16 button item 28= Pass card invalid day 0
28-0082 Level 29= Special day / period 0
28-0083 B17 button item 30= Rate setting 96
28-0084 Level 31= Pass card valid / invalid 0
28-0085 B18 button item 32= Pass card in / out 95
28-0086 Level 33= Invalid parking ticket 0
28-0087 B19 button item 34= Total (GT, MT, Multiple T, Multiple GT) 97
28-0088 Level 35= Password control 0
28-0089 B20 button item 36= Card issue (Engineer screen only) 99
28-0090 Level 38= Receipt re-print 0
28-0091 B21 button item 39= Online data display 0
28-0092 Level 40= Barcode reader 0
28-0093 B22 button item 41= Lost Ticket Issue 0
28-0094 Level 49= Invalid management card setting 0
28-0095 B23 button item 50= DST 0
28-0096 Level 94= (Reserved for ACI) 0
28-0097 B24 button item 95= To Idle screen 0
28-0098 Level 96= To Engineer operation 0
28-0099 B25 button item 97= To First time operation 0
28-0100 Level 98= To Operator operation 0
28-0101 B26 button item 99= To Management operation 0
28-0102 Level * Refer to the end of Chapter 28 regarding button numbers. 0
28-0103 B27 button item 0
28-0104 Level 0
28-0105 B28 button item 0
28-0106 Level 0
28-0107 B29 button item 0
28-0108 Level 0
28-0109 B30 button item 0
28-0110 Level 0

- 55 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


28-0111 C1 button item [Level] 21
28-0112 Level 0-4= Access levels 0-4 0
28-0113 C2 button item [Item] 34
28-0114 Level 00= Not used 0
28-0115 C3 button item 01= Parking lot status 25
28-0116 Level 02= Error / warning 0
28-0117 C4 button item 03= Cash check 23
28-0118 Level 04= Clock adjustment 0
28-0119 C5 button item 05= Ticket information 22
28-0120 Level 06= Parking lot space control 0
28-0121 C6 button item 07= In operation / out of service 29
28-0122 Level 08= Status check 0
28-0123 C7 button item 09= Shutter control 33
28-0124 Level 10= Opening hours start / end 0
28-0125 C8 button item 11= Clear password 49
28-0126 Level 12= T Total (T sub total, T total, previous T total) 0
28-0127 C9 button item 13= Gate open / close 31
28-0128 Level 14= Safe check 0
28-0129 C10 button item 15= Payment mode 32
28-0130 Level 16= Pass card in / out 0
28-0131 C11 button item 17= Pass card valid / invalid 30
28-0132 Level 18= Sub total (GT, MT, Multiple T, Multiple GT) 0
28-0133 C12 button item 19= Display adjustment 28
28-0134 Level 20= Voice announcement 0
28-0135 C13 button item 21= Change filling 35
28-0136 Level 22= Antipass 0
28-0137 C14 button item 23= Service time 24
28-0138 Level 24= Return money (payment cancel) 0
28-0139 C15 button item 25= Inventory 0
28-0140 Level 26= Exit alarm output 0
28-0141 C16 button item 28= Pass card invalid day 0
28-0142 Level 29= Special day / period 0
28-0143 C17 button item 30= Rate setting 96
28-0144 Level 31= Pass card valid / invalid 0
28-0145 C18 button item 32= Pass card in / out 95
28-0146 Level 33= Invalid parking ticket 0
28-0147 C19 button item 34= Total (GT, MT, Multiple T, Multiple GT) 97
28-0148 Level 35= Password control 0
28-0149 C20 button item 36= Card issue (Engineer screen only) 98
28-0150 Level 38= Receipt re-print 0
28-0151 C21 button item 39= Online data display 0
28-0152 Level 41= Lost Ticket Issue 0
28-0153 C22 button item 49= Invalid management card setting 0
28-0154 Level 50= DST 0
28-0155 C23 button item 94= (Reserved for ACI) 0
28-0156 Level 95= To Idle screen 0
28-0157 C24 button item 96= To Engineer operation 0
28-0158 Level 97= To First time operation 0
28-0159 C25 button item 98= To Operator operation 0
28-0160 Level 99= To Management operation 0
28-0161 C26 button item 200= PROTON Card 0
28-0162 Level 201= Chip & PIN 0
28-0163 C27 button item * Refer to the end of Chapter 28 regarding button numbers. 0
28-0164 Level 0
28-0165 C28 button item 0
28-0166 Level 0
28-0167 C29 button item 0
28-0168 Level 0
28-0169 C30 button item 0
28-0170 Level 0

- 56 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

[ Position of each button ]

First time screen


2000Yr 11Mth 20th (Tues) 18:00 Initial screen operations (2/3) ? Initial screen operations (3/3) ?

A6 A7 A16 A17

A8 A9 A18 A19

A10 A11 A20 A21


A1 A2
A12 A13 A22 A23

A3 A4
A14 A15 A24 A25

A5 To Next
To back To next To Back To Next

Operator Operation screen

Attendant Operation (1/3) ? Attendant Operation (2/3) ? Attendant Operation (3/3) ?

B1 B2 B11 B12 B21 B22

B3 B4 B13 B14 B23 B24

B5 B6 B15 B16 B25 B26

B7 B8 B17 B18 B27 B28

B9 B10 B19 B20 B29 B30

To Back To Next To back To next To Back To Next

Management Operation screen

Administrator Operation (1/3) ? Administrator Operation (2/3) ? Administrator Operation (3/3) ?

C1 C2 C11 C12 C21 C22

C3 C4 C13 C14 C23 C24

C5 C6 C15 C16 C25 C26

C7 C8 C17 C18 C27 C28

C9 C10 C19 C20 C29 C30

To Back To Next To Back To Next To Back To Next

- 57 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-29. Paystation Display Settings


Address Item Setting Range Default 77
29-0001 Pass card renewal button 0= Disabled (Not display) / 1= Enabled (Display) 0
29-0002 Ticket name when error was happened 0= Ticket / 1= Card 0
29-0003 ticket name 1 When CPS &EPS 0= Parking ticket (Ticket name 2) 0
(The ticket type 1= Pass card (Ticket name 3)
which is asked 2= Parking ticket (Ticket name 2) or Pass card (Ticket name 3)
29-0004 for insertion in No used 0 X
the ticket insert
message)
29-0005 Ticket name 2 0= Parking ticket. 0 X
29-0006 Ticket name 3 0= Pass card 0 X
29-0007 Ticket name 4 Service ticket 0= No / 1=Yes 1
29-0008 (This ticket is Discount ticket 0
29-0009 displayed in the Coupon ticket 0
2nd line of fee
indication :
“ Please insert
the xxx first ”)
29-0010 Ticket name5 Service ticket 1
29-0011 (This ticket is Discount ticket 0
29-0012 displayed in the Coupon ticket 0
29-0013 2nd line of fee Prepaid card 0
29-0014 indication : Credit card 0
“ Please insert
the Point card
after using xxx”)
29-0015 Ticket name 6 Service ticket 1
29-0016 (This ticket is Unused 0 X
29-0017 displayed in the Coupon ticket 0
29-0018 middle of fee Prepaid card 0
29-0019 indication : Credit card 0
29-0020 “ Please pay Point card 0
29-0021 using xxx”) Cash 0= Not include 3
1= Display “coin” / 2= Display “Bank note”
3= Display “Coin”, “Bank Note” / 4= Display “cash”
9= Display “Coin (available coin only)”, “Bank Note(available Note
only)”
29-0022 Ticket name 7 Credit card 0= Not include / 1= Include 0
29-0023 (This ticket is Cash 0= Not include 3
displayed in the 1= Display “coin” / 2= Display “Bank note”
middle of fee for 3= Display “Coin”, “Bank Note” / 4= Display “cash”
pass card 9= Display “Coin (available coin only)”, “Bank Note(available Note
renewal only)”
“ Please pay
using xxx”)
29-0024 The guidance message in case of an error 0= Please make the payment at the Exit paystation 0
when payment couldn’t be done with a pass 1= Please go to the reception
card because the paystation was a CPS 2= Please go to the control room
3= Please Contact using the interphone
4= Please contact the attendant
5= Please press the attendant call button
29-0025 Error guidance message in case of out of 1= Please go to the reception 7
change 2= Please go to the control room
3= Please Contact using the interphone
4= Please contact the attendant
5= Please press the attendant call button
6= Please take the credit note and go to the reception
7= Please take the credit note and go to the control room

- 58 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


29-0026 Image 1 display switching time 0= Not switch (always 1st screen) / 1-999= 0.1-99.9 sec. 5
29-0027 Idle screen sentence (CPS : 1st digit) 12 add
0= Please pay here, Before you exit
1= Paystation, Please pay parking fee here
2= Touch the display anywhere, To change the payment screen
9= (No message)
Idle screen

(EPS : 2nd digit)


0= Paystation1= Please drive up, to pay the parking fee
9= (No message)

Ex. Value= 12
In case of CPS, “Touch the display anywhere, To change the payment
screen”. In case of EPS, “Please drive up, to pay the parking fee”
29-0028 Type of screen (CPS) 0= No display / 1-2= idle screen pattern 1
29-0029 Type of screen (EPS) 0= No display / 1-6= idle screen pattern 1
29-0030 Image 1 display switching time 0= Not switch (always 1st screen) / 1-999= 0.1-99.9 sec. 5
29-0031 Unused 0 X
29-0032 1st line strings at the payment 0= Please insert the (Ticket name1) 0
1= Please insert the (Ticket name1) in 1
2= Please insert the (Ticket name1) in the direction of the arrow
3= Please push the Start Payment button.
29-0033 2nd line strings at the payment (CPS) 0= No display 0
1= If you have a (Ticket name3) please insert it.
2= Please push the (Ticket name3) renew button to renew the (Ticket
Ticket insert message

name3)
3= If you have a (Ticket name 3) and pay by a credit card, please push
the Credit card payment button.
4= If you have a (Ticket name 3), please present it.
5= If you lost a (Ticket name 3), please press the lost ticket button.
29-0034 2nd line strings at the payment (EPS) 0= No display 0 X
1= Customers having (Ticket name3) please insert (Ticket name3)
2= Customers who have lost the (Ticket name2) please press the lost
ticket button
3= If you have a (Ticket name 3) and pay by a credit card, please push
the Credit card payment button.
4= If you have a (Ticket name 3), please present it.
29-0035 Display of the 2nd line at the time pass 0= Please insert the (Ticket name3) 0
card renewal 1= Please insert the (Ticket name3) in 1
2= (Unused)
3= If you have a (Ticket name 3), please present it.
29-0036 Image 1 display switching time 0= Not switch (always 1st screen) / 1-999= 0.1-99.9 sec. 5
Fee message

29-0037 Unused 0
29-0038 2nd line strings 0= No display 1
1= Please insert the (Ticket name 4) first
2= Please insert the Point Card before putting in the cash
3= Please insert the Point card after using (ticket name 5)
29-0039 Image 1display switching time Not switch (always 1st screen) / 1-999= 0.1-99.9 sec. 0
Money insert guide

29-0040 Unused 0

29-0041 Image 1 display switching time 0= Not switch / 1-999 = 0.1-99.9 seconds 5
29-0042 2nd line message (EPS) 0= No message 3
1= Thank you.
2= Drive carefully.
Payment complete

3= Gate will open. Please proceed forward.


29-0043 1st line strings at the payment 0= No display 1
1= Thank you
2= Drive carefully
3= Gate will open. Please proceed forward
29-0044 Display of the 1st line at time of pass 0= No display 1
card renewal 1= Thank You
29-0045 Display of the 2nd line(CPS) 0= No display 1
1= The returned (xxx) will be required at the exit
(xxx):(Ticket name 3) in case payment has been completed by
pass card only, in other cases display (Ticket name2)

- 59 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC Default 77 79


(ATAS)
29-0046 String 0= No display 4
Display when out of operation

1= Please use another paystation


2= Please use the ticket to exit
3= Please come to the information desk
4= Please come to the control room
5= Please use the intercom button to contact the operator
6= Please contact the operator
7= Please push the operator call button
8= The operator will be with you soon. Please wait

29-0047 Unused X 0 X
29-0048 Unused X 0 X
29-0049 Unused X 0 X
29-0050 Unused X 0 X
29-0051 Payment screen control display1 (AKC) 0= No X 1 X
29-0052 Payment screen control display2 (AKC) 1= Display entry date/time and parking location X 2 X
29-0053 Payment screen control display3 (AKC) information X 3 X
29-0054 Payment screen control display4 (AKC) 2= Display cash receipt button with personal ID X 4 X
29-0055 Payment screen control display5 (AKC) 3= Display T-money/transportation card payment X 5 X
29-0056 Payment screen control display6 (AKC) button X 6 X
29-0057 Payment screen control display7 (AKC) 4= Display number entering discount button X 0 X
29-0058 Payment screen control display8 (AKC) 5= Display credit card discount or remoto discount X 0 X
6= Display out of change
29-0059 Payment screen control display9 (AKC) X 0 X
29-0060 Payment screen control display10 (AKC) X 0 X

- 60 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-30. Paystation Voice Announcement Setting


Address Item Setting Range Default 77 79
30-0001 Registration No.1 No. of repetition [ No. of repetition ] 2
30-0002 Discontinue / continue 0= Not broadcast / 1-9= 1-9 times 1
30-0003 Phrase 1 / 99= Repeat until next announcement comes 1
30-0004 Phrase 2 [ Discontinue / continue ]
30-0005 Phrase 3 0= Stop the current announcement immediately, and
30-0006 Phrase 4 do next announcement.
30-0007 Phrase 5 1= Wait until current announcement is finished, and
30-0008 Phrase 6 do next announcement.
30-0009 Phrase 7 [Phrases 1-12]
30-0010 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0011 Phrase 9 reading the charges
30-0012 Phrase 10
30-0013 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0014 Phrase 12 (reserve) end of Chapter 30.
30-0015 (Reserve)
30-0016 Registration No.2 No. of repetition 2
30-0017 Discontinue / continue 1
30-0018 Phrase 1 1
30-0019 Phrase 2
30-0020 Phrase 3
30-0021 Phrase 4
30-0022 Phrase 5
30-0023 Phrase 6
30-0024 Phrase 7
30-0025 Phrase 8
30-0026 Phrase 9
30-0027 Phrase 10
30-0028 Phrase 11 (reserve)
30-0029 Phrase 12 (reserve)
30-0030 (Reserve)
30-0031 Registration No.3 No. of repetition 2
30-0032 Discontinue / continue 1
30-0033 Phrase 1 7
30-0034 Phrase 2
30-0035 Phrase 3
30-0036 Phrase 4
30-0037 Phrase 5
30-0038 Phrase 6
30-0039 Phrase 7
30-0040 Phrase 8
30-0041 Phrase 9
30-0042 Phrase 10
30-0043 Phrase 11 (reserve)
30-0044 Phrase 12 (reserve)
30-0045 (Reserve)
30-0046 Registration No.4 No. of repetition 1
30-0047 Discontinuation/continuation 0
30-0048 Phrase 1 192
30-0049 Phrase 2 999
30-0050 Phrase 3
30-0051 Phrase 4
30-0052 Phrase 5
30-0053 Phrase 6
30-0054 Phrase 7
30-0055 Phrase 8
30-0056 Phrase 9
30-0057 Phrase 10
30-0058 Phrase 11 (reserve)
30-0059 Phrase 12 (reserve)
30-0060 (Reserve)

- 61 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0121 Registration No.9 No. of repetition [ No. of repetition ] 1
30-0122 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 1
30-0123 Phrase 1 / 99= Repeat until next announcement comes 25
30-0124 Phrase 2 [ Discontinue / continue ]
30-0125 Phrase 3 0= Stop the current announcement immediately, and
30-0126 Phrase 4 do next announcement.
30-0127 Phrase 5 1= Wait until current announcement is finished, and
30-0128 Phrase 6 do next announcement.
30-0129 Phrase 7 [Phrases 1-12]
30-0130 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0131 Phrase 9 reading the charges
30-0132 Phrase 10
30-0133 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0134 Phrase 12 (reserve) end of Chapter 30.
30-0135 (Reserve)
30-0136 Registration No.10 No. of repetition 1
30-0137 Discontinuation/continuation 1
30-0138 Phrase 1 50
30-0139 Phrase 2
30-0140 Phrase 3
30-0141 Phrase 4
30-0142 Phrase 5
30-0143 Phrase 6
30-0144 Phrase 7
30-0145 Phrase 8
30-0146 Phrase 9
30-0147 Phrase 10
30-0148 Phrase 11 (reserve)
30-0149 Phrase 12 (reserve)
30-0150 (Reserve)
30-0151 Registration No.11 No. of repetition 1
30-0132 Discontinuation/continuation 1
30-0153 Phrase 1 55
30-0154 Phrase 2
30-0155 Phrase 3
30-0156 Phrase 4
30-0157 Phrase 5
30-0158 Phrase 6
30-0159 Phrase 7
30-0160 Phrase 8
30-0161 Phrase 9
30-0162 Phrase 10
30-0163 Phrase 11 (reserve)
30-0164 Phrase 12 (reserve)
30-0165 (Reserve)
30-0166 Registration No.12 No. of repetition 1
30-0167 Discontinuation/continuation 1
30-0168 Phrase 1 30
30-0169 Phrase 2
30-0170 Phrase 3
30-0171 Phrase 4
30-0172 Phrase 5
30-0173 Phrase 6
30-0174 Phrase 7
30-0175 Phrase 8
30-0176 Phrase 9
30-0177 Phrase 10
30-0178 Phrase 11 (reserve)
30-0179 Phrase 12 (reserve)
30-0180 (Reserve)

- 62 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0181 Registration No.13 No. of repetition [ No. of repetition ] 1
30-0182 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 1
30-0183 Phrase 1 / 99= Repeat until next announcement comes 49
30-0184 Phrase 2 [ Discontinue / continue ]
30-0185 Phrase 3 0= Stop the current announcement immediately, and
30-0186 Phrase 4 do next announcement.
30-0187 Phrase 5 1= Wait until current announcement is finished, and
30-0188 Phrase 6 do next announcement.
30-0189 Phrase 7 [Phrases 1-12]
30-0190 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0191 Phrase 9 reading the charges
30-0192 Phrase 10
30-0193 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0194 Phrase 12 (reserve) end of Chapter 30.
30-0195 (Reserve)
30-0196 Registration No.14 No. of repetition 1
30-0197 Discontinuation/continuation 1
30-0198 Phrase 1 58
30-0199 Phrase 2
30-0200 Phrase 3
30-0201 Phrase 4
30-0202 Phrase 5
30-0203 Phrase 6
30-0204 Phrase 7
30-0205 Phrase 8
30-0206 Phrase 9
30-0207 Phrase 10
30-0208 Phrase 11 (reserve)
30-0209 Phrase 12 (reserve)
30-0210 (Reserve)
30-0211 Registration No.15 No. of repetition
30-0212 Discontinuation/continuation
30-0213 Phrase 1
30-0214 Phrase 2
30-0215 Phrase 3
30-0216 Phrase 4
30-0217 Phrase 5
30-0218 Phrase 6
30-0219 Phrase 7
30-0220 Phrase 8
30-0221 Phrase 9
30-0222 Phrase 10
30-0223 Phrase 11 (reserve)
30-0224 Phrase 12 (reserve)
30-0225 (Reserve)
30-0226 Registration No.16 No. of repetition 2
30-0227 Discontinuation/continuation 0
30-0228 Phrase 1 60
30-0229 Phrase 2 107
30-0230 Phrase 3
30-0231 Phrase 4
30-0232 Phrase 5
30-0233 Phrase 6
30-0234 Phrase 7
30-0235 Phrase 8
30-0236 Phrase 9
30-0237 Phrase 10
30-0238 Phrase 11 (reserve)
30-0239 Phrase 12 (reserve)
30-0240 (Reserve)

- 63 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0241 Registration No.17 No. of repetition [ No. of repetition ] 1
30-0242 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0243 Phrase 1 / 99= Repeat until next announcement comes 109
30-0244 Phrase 2 [ Discontinue / continue ]
30-0245 Phrase 3 0= Stop the current announcement immediately, and
30-0246 Phrase 4 do next announcement.
30-0247 Phrase 5 1= Wait until current announcement is finished, and
30-0248 Phrase 6 do next announcement.
30-0249 Phrase 7 [Phrases 1-12]
30-0250 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0251 Phrase 9 reading the charges
30-0252 Phrase 10
30-0253 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0254 Phrase 12 (reserve) end of Chapter 30.
30-0255 (Reserve)
30-0256 Registration No.18 No. of repetition 1
30-0257 Discontinuation/continuation 0
30-0258 Phrase 1 107
30-0259 Phrase 2
30-0260 Phrase 3
30-0261 Phrase 4
30-0262 Phrase 5
30-0263 Phrase 6
30-0264 Phrase 7
30-0265 Phrase 8
30-0266 Phrase 9
30-0267 Phrase 10
30-0268 Phrase 11 (reserve)
30-0269 Phrase 12 (reserve)
30-0270 (Reserve)
30-0271 Registration No.19 No. of repetition 1
30-0272 Discontinuation/continuation 0
30-0273 Phrase 1 20
30-0274 Phrase 2
30-0275 Phrase 3
30-0276 Phrase 4
30-0277 Phrase 5
30-0278 Phrase 6
30-0279 Phrase 7
30-0280 Phrase 8
30-0281 Phrase 9
30-0282 Phrase 10
30-0283 Phrase 11 (reserve)
30-0284 Phrase 12 (reserve)
30-0285 (Reserve)
30-0286 Registration No.20 No. of repetition 1
30-0287 Discontinuation/continuation 0
30-0288 Phrase 1 21
30-0289 Phrase 2
30-0290 Phrase 3
30-0291 Phrase 4
30-0292 Phrase 5
30-0293 Phrase 6
30-0294 Phrase 7
30-0295 Phrase 8
30-0296 Phrase 9
30-0297 Phrase 10
30-0298 Phrase 11 (reserve)
30-0299 Phrase 12 (reserve)
30-0300 (Reserve)

- 64 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0301 Registration No.21 No. of repetition [ No. of repetition ] 1
30-0302 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0303 Phrase 1 / 99= Repeat until next announcement comes 78
30-0304 Phrase 2 [ Discontinue / continue ]
30-0305 Phrase 3 0= Stop the current announcement immediately, and
30-0306 Phrase 4 do next announcement.
30-0307 Phrase 5 1= Wait until current announcement is finished, and
30-0308 Phrase 6 do next announcement.
30-0309 Phrase 7 [Phrases 1-12]
30-0310 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0311 Phrase 9 reading the charges
30-0312 Phrase 10
30-0313 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0314 Phrase 12 (reserve) end of Chapter 30.
30-0315 (Reserve)
30-0316 Registration No.22 No. of repetition 1
30-0317 Discontinuation/continuation 0
30-0318 Phrase 1 78
30-0319 Phrase 2
30-0320 Phrase 3
30-0321 Phrase 4
30-0322 Phrase 5
30-0323 Phrase 6
30-0324 Phrase 7
30-0325 Phrase 8
30-0326 Phrase 9
30-0327 Phrase 10
30-0328 Phrase 11 (reserve)
30-0329 Phrase 12 (reserve)
30-0330 (Reserve)
30-0331 Registration No.23 No. of repetition 1
30-0332 Discontinuation/continuation 0
30-0333 Phrase 1 146
30-0334 Phrase 2
30-0335 Phrase 3
30-0336 Phrase 4
30-0337 Phrase 5
30-0338 Phrase 6
30-0339 Phrase 7
30-0340 Phrase 8
30-0341 Phrase 9
30-0342 Phrase 10
30-0343 Phrase 11 (reserve)
30-0344 Phrase 12 (reserve)
30-0345 (Reserve)
30-0346 Registration No.24 No. of repetition 1
30-0347 Discontinuation/continuation 0
30-0348 Phrase 1 88
30-0349 Phrase 2
30-0350 Phrase 3
30-0351 Phrase 4
30-0352 Phrase 5
30-0353 Phrase 6
30-0354 Phrase 7
30-0355 Phrase 8
30-0356 Phrase 9
30-0357 Phrase 10
30-0358 Phrase 11 (reserve)
30-0359 Phrase 12 (reserve)
30-0360 (Reserve)

- 65 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0361 Registration No.25 No. of repetition [ No. of repetition ] 1
30-0362 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0363 Phrase 1 / 99= Repeat until next announcement comes 89
30-0364 Phrase 2 [ Discontinue / continue ]
30-0365 Phrase 3 0= Stop the current announcement immediately, and
30-0366 Phrase 4 do next announcement.
30-0367 Phrase 5 1= Wait until current announcement is finished, and
30-0368 Phrase 6 do next announcement.
30-0369 Phrase 7 [Phrases 1-12]
30-0370 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0371 Phrase 9 reading the charges
30-0372 Phrase 10
30-0373 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0374 Phrase 12 (reserve) end of Chapter 30.
30-0375 (Reserve)
30-0376 Registration No.26 No. of repetition 1
30-0377 Discontinuation/continuation 0
30-0378 Phrase 1 144
30-0379 Phrase 2
30-0380 Phrase 3
30-0381 Phrase 4
30-0382 Phrase 5
30-0383 Phrase 6
30-0384 Phrase 7
30-0385 Phrase 8
30-0386 Phrase 9
30-0387 Phrase 10
30-0388 Phrase 11 (reserve)
30-0389 Phrase 12 (reserve)
30-0390 (Reserve)
30-0391 Registration No.27 No. of repetition 1
30-0392 Discontinuation/continuation 0
30-0393 Phrase 1 95
30-0394 Phrase 2
30-0395 Phrase 3
30-0396 Phrase 4
30-0397 Phrase 5
30-0398 Phrase 6
30-0399 Phrase 7
30-0400 Phrase 8
30-0401 Phrase 9
30-0402 Phrase 10
30-0403 Phrase 11 (reserve)
30-0404 Phrase 12 (reserve)
30-0405 (Reserve)
30-0406 Registration No.28 No. of repetition 1
30-0407 Discontinuation/continuation 0
30-0408 Phrase 1 90
30-0409 Phrase 2
30-0410 Phrase 3
30-0411 Phrase 4
30-0412 Phrase 5
30-0413 Phrase 6
30-0414 Phrase 7
30-0415 Phrase 8
30-0416 Phrase 9
30-0417 Phrase 10
30-0418 Phrase 11 (reserve)
30-0419 Phrase 12 (reserve)
30-0420 (Reserve)

- 66 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0421 Registration No.29 No. of repetition [ No. of repetition ] 1
30-0422 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0423 Phrase 1 / 99= Repeat until next announcement comes 118
30-0424 Phrase 2 [ Discontinue / continue ]
30-0425 Phrase 3 0= Stop the current announcement immediately, and
30-0426 Phrase 4 do next announcement.
30-0427 Phrase 5 1= Wait until current announcement is finished, and
30-0428 Phrase 6 do next announcement.
30-0429 Phrase 7 [Phrases 1-12]
30-0430 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0431 Phrase 9 reading the charges
30-0432 Phrase 10
30-0433 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0434 Phrase 12 (reserve) end of Chapter 30.
30-0435 (Reserve)
30-0436 Registration No.30 No. of repetition 1
30-0437 Discontinuation/continuation 0
30-0438 Phrase 1 86
30-0439 Phrase 2
30-0440 Phrase 3
30-0441 Phrase 4
30-0442 Phrase 5
30-0443 Phrase 6
30-0444 Phrase 7
30-0445 Phrase 8
30-0446 Phrase 9
30-0447 Phrase 10
30-0448 Phrase 11 (reserve)
30-0449 Phrase 12 (reserve)
30-0450 (Reserve)
30-0451 Registration No.31 No. of repetition 1
30-0432 Discontinuation/continuation 0
30-0453 Phrase 1 87
30-0454 Phrase 2
30-0455 Phrase 3
30-0456 Phrase 4
30-0457 Phrase 5
30-0458 Phrase 6
30-0459 Phrase 7
30-0460 Phrase 8
30-0461 Phrase 9
30-0462 Phrase 10
30-0463 Phrase 11 (reserve)
30-0464 Phrase 12 (reserve)
30-0465 (Reserve)
30-0466 Registration No.32 No. of repetition 1
30-0467 Discontinuation/continuation 1
30-0468 Phrase 1 59
30-0469 Phrase 2
30-0470 Phrase 3
30-0471 Phrase 4
30-0472 Phrase 5
30-0473 Phrase 6
30-0474 Phrase 7
30-0475 Phrase 8
30-0476 Phrase 9
30-0477 Phrase 10
30-0478 Phrase 11 (reserve)
30-0479 Phrase 12 (reserve)
30-0480 (Reserve)

- 67 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0481 Registration No.33 No. of repetition [ No. of repetition ] 1
30-0482 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0483 Phrase 1 / 99= Repeat until next announcement comes 145
30-0484 Phrase 2 [ Discontinue / continue ]
30-0485 Phrase 3 0= Stop the current announcement immediately, and
30-0486 Phrase 4 do next announcement.
30-0487 Phrase 5 1= Wait until current announcement is finished, and
30-0488 Phrase 6 do next announcement.
30-0489 Phrase 7 [Phrases 1-12]
30-0490 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0491 Phrase 9 reading the charges
30-0492 Phrase 10
30-0493 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0494 Phrase 12 (reserve) end of Chapter 30.
30-0495 (Reserve)
30-0496 Registration No.34 No. of repetition 1
30-0497 Discontinuation/continuation 1
30-0498 Phrase 1 147
30-0499 Phrase 2
30-0500 Phrase 3
30-0501 Phrase 4
30-0502 Phrase 5
30-0503 Phrase 6
30-0504 Phrase 7
30-0505 Phrase 8
30-0506 Phrase 9
30-0507 Phrase 10
30-0508 Phrase 11 (reserve)
30-0509 Phrase 12 (reserve)
30-0510 (Reserve)
30-0511 Registration No.35 No. of repetition 1
30-0512 Discontinuation/continuation 1
30-0513 Phrase 1 124
30-0514 Phrase 2
30-0515 Phrase 3
30-0516 Phrase 4
30-0517 Phrase 5
30-0518 Phrase 6
30-0519 Phrase 7
30-0520 Phrase 8
30-0521 Phrase 9
30-0522 Phrase 10
30-0523 Phrase 11 (reserve)
30-0524 Phrase 12 (reserve)
30-0525 (Reserve)
30-0526 Registration No.36 No. of repetition 1
30-0527 Discontinuation/continuation 1
30-0528 Phrase 1 104
30-0529 Phrase 2
30-0530 Phrase 3
30-0531 Phrase 4
30-0532 Phrase 5
30-0533 Phrase 6
30-0534 Phrase 7
30-0535 Phrase 8
30-0536 Phrase 9
30-0537 Phrase 10
30-0538 Phrase 11 (reserve)
30-0539 Phrase 12 (reserve)
30-0540 (Reserve)

- 68 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0541 Registration No.37 No. of repetition [ No. of repetition ] 1
30-0542 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0543 Phrase 1 / 99= Repeat until next announcement comes 121
30-0544 Phrase 2 [ Discontinue / continue ]
30-0545 Phrase 3 0= Stop the current announcement immediately, and
30-0546 Phrase 4 do next announcement.
30-0547 Phrase 5 1= Wait until current announcement is finished, and
30-0548 Phrase 6 do next announcement.
30-0549 Phrase 7 [Phrases 1-12]
30-0550 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0551 Phrase 9 reading the charges
30-0552 Phrase 10
30-0553 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0554 Phrase 12 (reserve) end of Chapter 30.
30-0555 (Reserve)
30-0556 Registration No.38 No. of repetition 1
30-0557 Discontinuation/continuation 1
30-0558 Phrase 1 120
30-0559 Phrase 2 121
30-0560 Phrase 3
30-0561 Phrase 4
30-0562 Phrase 5
30-0563 Phrase 6
30-0564 Phrase 7
30-0565 Phrase 8
30-0566 Phrase 9
30-0567 Phrase 10
30-0568 Phrase 11 (reserve)
30-0569 Phrase 12 (reserve)
30-0570 (Reserve)
30-0571 Registration No.39 No. of repetition
30-0572 Discontinuation/continuation
30-0573 Phrase 1
30-0574 Phrase 2
30-0575 Phrase 3
30-0576 Phrase 4
30-0577 Phrase 5
30-0578 Phrase 6
30-0579 Phrase 7
30-0580 Phrase 8
30-0581 Phrase 9
30-0582 Phrase 10
30-0583 Phrase 11 (reserve)
30-0584 Phrase 12 (reserve)
30-0585 (Reserve)
30-0586 Registration No.40 No. of repetition 1
30-0587 Discontinuation/continuation 0
30-0588 Phrase 1 89
30-0589 Phrase 2
30-0590 Phrase 3
30-0591 Phrase 4
30-0592 Phrase 5
30-0593 Phrase 6
30-0594 Phrase 7
30-0595 Phrase 8
30-0596 Phrase 9
30-0597 Phrase 10
30-0598 Phrase 11 (reserve)
30-0599 Phrase 12 (reserve)
30-0600 (Reserve)

- 69 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


30-0601 Registration No.41 No. of repetition [ No. of repetition ] 1
30-0602 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0
30-0603 Phrase 1 / 99= Repeat until next announcement comes 89
30-0604 Phrase 2 [ Discontinue / continue ]
30-0605 Phrase 3 0= Stop the current announcement immediately, and
30-0606 Phrase 4 do next announcement.
30-0607 Phrase 5 1= Wait until current announcement is finished, and
30-0608 Phrase 6 do next announcement.
30-0609 Phrase 7 [Phrases 1-12]
30-0610 Phrase 8 0= None / 1-240= Phrase No. / 999=numerical value for
30-0611 Phrase 9 reading the charges
30-0612 Phrase 10
30-0613 Phrase 11 (reserve) * For the broadcast situation of each registration No., refer to the
30-0614 Phrase 12 (reserve) end of Chapter 30.
30-0615 (Reserve)
30-0616 Registration No.42 No. of repetition 1
30-0617 Discontinuation/continuation 0
30-0618 Phrase 1 77
30-0619 Phrase 2
30-0620 Phrase 3
30-0621 Phrase 4
30-0622 Phrase 5
30-0623 Phrase 6
30-0624 Phrase 7
30-0625 Phrase 8
30-0626 Phrase 9
30-0627 Phrase 10
30-0628 Phrase 11 (reserve)
30-0629 Phrase 12 (reserve)
30-0630 (Reserve)
30-0631 Registration No.43 No. of repetition 1
30-0632 Discontinuation/continuation 0
30-0633 Phrase 1 90
30-0634 Phrase 2
30-0635 Phrase 3
30-0636 Phrase 4
30-0637 Phrase 5
30-0638 Phrase 6
30-0639 Phrase 7
30-0640 Phrase 8
30-0641 Phrase 9
30-0642 Phrase 10
30-0643 Phrase 11 (reserve)
30-0644 Phrase 12 (reserve)
30-0645 (Reserve)
30-0646 Registration No.44 No. of repetition 1
30-0647 Discontinuation/continuation 0
30-0648 Phrase 1 57
30-0649 Phrase 2
30-0650 Phrase 3
30-0651 Phrase 4
30-0652 Phrase 5
30-0653 Phrase 6
30-0654 Phrase 7
30-0655 Phrase 8
30-0656 Phrase 9
30-0657 Phrase 10
30-0658 Phrase 11 (reserve)
30-0659 Phrase 12 (reserve)
30-0660 (Reserve)

- 70 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC ATAS 77 79


(Default)
30-0661 Registration No.45 No. of repetition [ No. of repetition ] 1 1 1
30-0662 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0 0 0
30-0663 Phrase 1 / 99= Repeat until next announcement 77 77 77
30-0664 Phrase 2 comes
30-0665 Phrase 3 [ Discontinue / continue ]
30-0666 Phrase 4 0= Stop the current announcement
30-0667 Phrase 5 immediately, and do next
30-0668 Phrase 6 announcement.
30-0669 Phrase 7 1= Wait until current announcement is
30-0670 Phrase 8 finished, and do next announcement.
30-0671 Phrase 9 [Phrases 1-12]
30-0672 Phrase 10 0= None / 1-240= Phrase No. /
30-0673 Phrase 11 (reserve) 999=numerical value for reading the
30-0674 Phrase 12 (reserve) charges
30-0675 (Reserve)
30-0676 Registration No.46 No. of repetition * For the broadcast situation of each registration 1 1
30-0677 Discontinuation/continuation No., refer to the end of Chapter 30. 0 0
30-0678 Phrase 1 129 132
30-0679 Phrase 2
30-0680 Phrase 3
30-0681 Phrase 4
30-0682 Phrase 5
30-0683 Phrase 6
30-0684 Phrase 7
30-0685 Phrase 8
30-0686 Phrase 9
30-0687 Phrase 10
30-0688 Phrase 11 (reserve)
30-0689 Phrase 12 (reserve)
30-0690 (Reserve)
30-0691 Registration No.47 No. of repetition 1 1
30-0692 Discontinuation/continuation 0 0
30-0693 Phrase 1 90 133
30-0694 Phrase 2
30-0695 Phrase 3
30-0696 Phrase 4
30-0697 Phrase 5
30-0698 Phrase 6
30-0699 Phrase 7
30-0700 Phrase 8
30-0701 Phrase 9
30-0702 Phrase 10
30-0703 Phrase 11 (reserve)
30-0704 Phrase 12 (reserve)
30-0705 (Reserve)
30-0706 Registration No.48 No. of repetition 1 1
30-0707 Discontinuation/continuation 0 0
30-0708 Phrase 1 130 134
30-0709 Phrase 2
30-0710 Phrase 3
30-0711 Phrase 4
30-0712 Phrase 5
30-0713 Phrase 6
30-0714 Phrase 7
30-0715 Phrase 8
30-0716 Phrase 9
30-0717 Phrase 10
30-0718 Phrase 11 (reserve)
30-0719 Phrase 12 (reserve)
30-0720 (Reserve)

- 71 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC ATAS 77 79


(Default)
30-0721 Registration No.49 No. of repetition [ No. of repetition ] 1 1
30-0722 Discontinuation/continuation 0= Not broadcast / 1-9= 1-9 times 0 0
30-0723 Phrase 1 / 99= Repeat until next announcement 131 137
30-0724 Phrase 2 comes
30-0725 Phrase 3 [ Discontinue / continue ]
30-0726 Phrase 4 0= Stop the current announcement
30-0727 Phrase 5 immediately, and do next
30-0728 Phrase 6 announcement.
30-0729 Phrase 7 1= Wait until current announcement is
30-0730 Phrase 8 finished, and do next announcement.
30-0731 Phrase 9 [Phrases 1-12]
30-0732 Phrase 10 0= None / 1-240= Phrase No. /
30-0733 Phrase 11 (reserve) 999=numerical value for reading the
30-0734 Phrase 12 (reserve) charges
30-0735 (Reserve)
30-0736 Registration No.50 No. of repetition * For the broadcast situation of each registration 1 1
30-0737 Discontinuation/continuation No., refer to the end of Chapter 30. 1 0
30-0738 Phrase 1 135 90
30-0739 Phrase 2
30-0740 Phrase 3
30-0741 Phrase 4
30-0742 Phrase 5
30-0743 Phrase 6
30-0744 Phrase 7
30-0745 Phrase 8
30-0746 Phrase 9
30-0747 Phrase 10
30-0748 Phrase 11 (reserve)
30-0749 Phrase 12 (reserve)
30-0750 (Reserve)
30-0751 Registration No.51 No. of repetition 1
30-0752 Discontinuation/continuation 1
30-0753 Phrase 1 87
30-0754 Phrase 2 85
30-0755 Phrase 3 0
30-0756 Phrase 4 0
30-0757 Phrase 5 0
30-0758 Phrase 6 0
30-0759 Phrase 7 0
30-0760 Phrase 8 0
30-0761 Phrase 9 0
30-0762 Phrase 10 0
30-0763 Phrase 11 (reserve) 0
30-0764 Phrase 12 (reserve) 0
30-0765 (Reserve) 0
30-0766 Registration No.52 No. of repetition 1
30-0767 Discontinuation/continuation 1
30-0768 Phrase 1 86
30-0769 Phrase 2 85
30-0770 Phrase 3 0
30-0771 Phrase 4 0
30-0772 Phrase 5 0
30-0773 Phrase 6 0
30-0774 Phrase 7 0
30-0775 Phrase 8 0
30-0776 Phrase 9 0
30-0777 Phrase 10 0
30-0778 Phrase 11 (reserve) 0
30-0779 Phrase 12 (reserve) 0
30-0780 (Reserve) 0

- 72 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

The announcement of which registration No. is to be performed, is shown


Reg. No. Phenomenon Setting address
1 During parking ticket insertion (in case of CPS) 30-0001 - 30-0015
2 (in case of EPS) 30-0016 - 30-0030
3 (pass card renewal) 30-0031 - 30-0045
4 Reading out the fee during the fee is displayed 30-0046 - 30-0060
5 During the fee is displayed < continued after reading out the fee > 30-0061 - 30-0075
(In case out of change occurs)
6 (In case of banknote is usable in lost ticket payment) 30-0076 - 30-0090
7 (In case of banknote is unusable in lost ticket payment) 30-0091 - 30-0105
8 (In case of re-payment because of the lagtime over) 30-0106 - 30-0120
9 (In case of banknote is usable in not lagtime over nor lost ticket payment) 30-0121 - 30-0135
10 (In case of banknote is unusable in not lagtime over nor lost ticket payment) 30-0136 - 30-0150
11 During the fee for pass card renewal is displayed < continued after reading out the fee > 30-0151 - 30-0165
(In case out of change occurs)
12 (In case of banknote is usable) 30-0166 - 30-0180
13 (In case of banknote is unusable) 30-0181 - 30-0195
14 Immediately after the first coin or note was inserted (when a receipt is issueable) 30-0196 - 30-0210
15 (when a receipt is not issueable) 30-0211 - 30-0225
16 Payment completed (in case of CPS) 30-0226 - 30-0240
17 (in case of EPS) 30-0241 - 30-0255
18 (pass card renewal) 30-0256 - 30-0270
19 Payment cancelled (in case of waiting for parking ticket extraction) 30-0271 - 30-0285
20 (in case of waiting for pass card extraction) 30-0286 - 30-0300
21 At inserting discount ticket etc. before fee is displayed (in case of CPS) 30-0301 - 30-0315
22 (in case of EPS) 30-0316 - 30-0330
23 When the ticket insertion direction is not correct 30-0331 - 30-0345
24 When the ticket which cannot be used is inserted (undefined ticket) 30-0346 - 30-0360
25 When the ticket which cannot be read is inserted (magnetic data spoilt) 30-0361 - 30-0375
26 When the paid ticket was inserted within repay time 30-0376 - 30-0390
27 When the credit card was read but the fee is over the credit card payment limit amount 30-0391 - 30-0405
28 When the credit card which cannot be used is inserted 30-0406 - 30-0420
29 When a credit card is inserted during some trouble is happened on the credit server 30-0421 - 30-0435
30 When the expired card is inserted 30-0436 - 30-0450
31 When a nearly expired card is inserted 30-0451 - 30-0465
32 When issue of a receipt is completed 30-0466 - 30-0480
33 When issue of a claim check is completed 30-0481 - 30-0495
34 When inserted coin is returned to the change slot because unreadable 30-0496 - 30-0510
35 When change money could not be dispensed 30-0511 - 30-0525
36 Guidance to the user in case of trouble 30-0526 - 30-0540
37 30-0541 - 30-0555
38 During credit card data inquiry 30-0556 - 30-0570
39 In case the balance is remained because the balance on the prepaid card was not enough. 30-0571 - 30-0585
40 When a no balance prepaid card is inserted 30-0586 - 30-0600
41 When a no balance coupon ticket is inserted 30-0601 - 30-0615
42 When a pass card could not be used due to the settings of CPS. 30-0616 - 30-0630
43 In case pass card is inserted to renew, but out of renewal validity period. 30-0631 - 30-0645
44 30-0646 - 30-0660
45 Unexpired event card (one-time pass card) is inserted 30-0661 - 30-0675
46 AKC: Waiting the period ticket pulled out 30-0676 - 30-0690
AE: The fee is exceeded the payable amount by proton, and proton card is inserted
47 AKC: The fee is exceeded the payable amount by transportation card, and transportation 30-0691 - 30-0705
card is presented on the reader
AE: Proton balance is not enough
48 AKC: Transportation card reader or server is in trouble, and transportation card is 30-0706 - 30-0720
presented on the reader
AE: Proton card re-insertion guide
49 AKC: transportation card data is being confirmed 30-0721 - 30-0735
AE: Proton card is inserted when the proton reader is in trouble
50 AKC: Not possible to write the data in T-Money card 30-0736 - 30-0750
AE: Possible to select the Pay in advance process

- 73 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

The contents which are broadcast irrespective of the settings


No. Situation Registratio Announcement
n number
1 When the door is closed without shutting the hopper door 167 Please shut the inside door.
2 When the door is closed without shutting the note dispenser 161 Please shut the note dispenser unit.
door
3 When the door is closed without setting the hopper 168 Please check the coin hopper.
4 When the door is closed without setting the coin/note safe 161 Please check the safe.
5 Unused 161 Please check the coin hopper.
6 When the door is closed without setting the coin/note safe 171 Please check the safe.
7 Unused 182 CF is not set.
8 When the door is closed when receipt printer has something 174 Please check the printer.
wrong
9 The door is closed when banknote reader has something 154 Sound effect
wrong (not available)
10 The door is closed when magnetic reader has something 154 Sound effect
wrong (not available)
11 The door is closed when coin acceptor has something wrong 154 Sound effect
(not available)
12 The door is closed when coin collector block has something 154 Sound effect
wrong (not available)
13 Illegal door open (not available) 151 Buzzer
14 (Future use)

No. Situation Registratio Announcement


n number
101 AKC Flap: Car space number input screen 301 Please press the parking spot number.
102 AKC Flap: Car space number input screen 302 Please press the parking spot number. If it is ok,
please press “OK” button. If it is not ok, please
press “Correct” button.
103 AKC Flap: Fee display 303 Please check the spot number, and pay the parking
fee. If spot number is not correct, please press the
cancel button.
104 AKC Flap: Payment completed 304 Please make sure the flap plate is down, and exit the
parking spot.
105 AKC Flap: Payment completed 305 Please make sure the lock plate is down, and exit the
parking spot.
106 AKC Flap: Car space number input screen 306 Please press the parking spot number.
107 AKC Flap: When error car space is selected 307 Flap plate is broken. Please call the operator.
108 AIT Taiwan: Fee display when taxpayer ID number is 308 If you need the taxpayer ID number on the receipt,
acceptable please press [Taxpayer ID No.] button.
109 AIT Taiwan: Taxpayer number input screen 309 Please press the taxpayer ID number.
110 310
111 AKC: After remote discounted 311 Discounted.
112 Std: Online Credit card IN/OUT ticket is inserted 312 If you entered by credit card, please insert the credit
card.
113 Std: In case the credit card payment button is displayed 313 If you want to pay by credit card, please press the
credit card payment button.
114 AKC: Online T-Money IN/OUT ticket is inserted 314 If you entered by T-Money, please present T-Money
on the reader.
115 AKC: In case T-Money payment button is displayed 315 If you want to pay by T-Money, please press
T-Money payment button.
116 When undiscountable card by Online is read. 316 This card is not discountable.
117 When online discounted card (but not settled yet) is read. 317 This card is already discounted.
118 When fixed rate transaction is started. 318 Please push “payment start” button to start payment.
119 Std: Debit card sales/recharge button pressed 319 Please insert debit card
120 Std: Insufficient debit card balance 320 The card balance is not enough. Please make the
payment after recharge.
121 AKC: Input ID is not available for online discount 321 Discount is not applied.
122 AKC: Input ID is already discounted 322 Discount was already applied.
123 Std: Online ID number discount guidance 323 Please insert the card to discount.
124 AKC: Online ID number discount guidance 324 Please push the button to discount.
125 AKC: ID number input screen is displayed 325 Please input your number.
126 AKC: Input ID number is incorrect 326 Please try again.
127 Std: Credit card input guidance for pass card payment 327 Please insert your credit card, if you wish to pay by
credit card.
128 When PIN input is required. (AE) 328 Please enter your PIN code.
129 When Chip & PIN card cannot be read. (AE) 329 Please insert your credit card again.
130 When a card (except ticket or pass card) is not taken out 330 Please take your card.
from ticket mouth.
131 Std:(IC Card etc.) In case that the card writing is not 331 Card cannot be written.
available.
132 Std:(IC card etc.) In case of rewriting the card 332 Please present the card.

- 74 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-31. Information Record Settings


Address Item Setting Range Default 77 79
31-0001 Automatic setting download from compact 0= No 0
flash (not available)
31-0002 Switching date (not available) 0 0
31-0003 Switching time (not available) 0 0
31-0004 Payment data 100
Maintenance DB write-in record

31-0005 Money management data The value is fixed from Ver.02. 2


31-0006 T Total 6
31-0007 Multiple T Total (Remark) 4
31-0008 GT Totals Record setting of payment data and total data are set by 01-0022 4
31-0009 Multiple GT Total 2
31-0010 MT Total 2
31-0011 Hopper Totals 6
31-0012 Note dispenser Total 6
31-0013 Coin Safe Total Automatic adjustment is not available from Ver.02. 6
31-0014 Note Safe Total 6
31-0015 Operation records 200
31-0016 Reserve 0
31-0017 Payment data contents at the time of 0= Communication data level / 1= details 0
information record (If 31-0017=1, the inserted or dispensed money detail is recorded for
the each payment.)

- 75 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

2-32. Password Settings


Address Item Setting Range Default 77 79
32-0001 Operator No.1 Valid / Invalid [ Valid / Invalid ] 0
32-0002 Password 0= Valid / 1= Invalid 9999
32-0003 Function [ Password ] 2
32-0004 Level 0= Not used / 1-9999 4
32-0005 Unissueable card [ function ] 65535
32-0006 Operator No.2 Valid/ Invalid 0-3 (3:only for engineer) 1
32-0007 Password [ Level ] 0
32-0008 Function 0-4 0
32-0009 Level [ Unissueable card ] 0
0-65535 (Settings of the unissueable card when issuing the
32-0010 Unissueable card 0
card from the setting operation)
32-0011 Operator No.3 Valid/ Invalid 1
32-0012 Password BIT Card to be issued possible/not 0
32-0013 Function possible 0
32-0014 Level D0 Parking ticket 0=possible 0
32-0015 Unissueable card D1 Pass card 1=impossible 0
32-0016 Operator No.4 Valid/ Invalid D2 Service ticket 1
32-0017 Password D3 Store discount ticket 0
32-0018 Function D4 Discount ticket 0
D5 Coupon ticket
32-0019 Level 0
D6 Prepaid card
32-0020 Unissueable card 0
32-0021 Operator No.5 Valid/ Invalid D7 Points card 1
32-0022 Password D8 Reserve 0
32-0023 Function D9 Reserve 0
32-0024 Level D10 Reserve 0
32-0025 Unissueable card 0
D11 Reserve
32-0026 Operator No.6 Valid/ Invalid 1
32-0027 Password D12 Reserve 0
32-0028 Function D13 Reserve 0
32-0029 Level D14 Reserve 0
D15 Reserve
32-0030 Unissueable card 0
32-0031 Operator No.7 Valid/ Invalid D15 D0 1
32-0032 Password 0
32-0033 Function 0
32-0034 Level 0
32-0035 Unissueable card 0
32-0036 Operator No.8 Valid/ Invalid +1 (Parking tkt) 1
32-0037 Password 0
+2 (pass card)
32-0038 Function 0
32-0039 Level +4 (Service tkt) 0
32-0040 Unissueable card 0
32-0041 Operator No.9 Valid/ Invalid +8 (store discount) 1
32-0042 Password 0
+16 (Discount tkt)
32-0043 Function 0
32-0044 Level +32 (Coupon tkt) 0
32-0045 Unissueable card 0
32-0046 Operator No.10 Valid/ Invalid +64 (Prepaid) 1
32-0047 Password +128 (Point card)
0
32-0048 Function 0
32-0049 Level +256 (Reserve) 0
32-0050 Unissueable card 0
32-0051 Operator No.11 Valid/ Invalid 1
32-0052 Password +32768 0
32-0053 Function 0
32-0054 Level 0
32-0055 Unissueable card 0
Setting example: When the parking ticket, coupon ticket,
32-0056 Operator No.12 Valid/ Invalid and prepaid card are not allowed to issue, set 97 because 1
32-0057 Password 1+32+64= 97 0
32-0058 Function 0
32-0059 Level 0
32-0060 Unissueable card 0

- 76 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


32-0061 Operator No.13 Valid/ Invalid [ Valid / Invalid ] 1
32-0062 Password 0= Valid / 1= Invalid 0
32-0063 Function [ Password ] 0
32-0064 Level 0= Not used / 1-9999 0
32-0065 Unissueable card [ function ] 0
32-0066 Operator No.14 Valid/ Invalid 0-3 (3:only for engineer) 1
32-0067 Password [ Level ] 0
32-0068 Function 0-4 0
32-0069 Level [ Unissueable card ] 0
0-65535 (Settings of the unissueable card when issuing the
32-0070 Unissueable card 0
card from the setting operation)
32-0071 Operator No.15 Valid/ Invalid 1
32-0072 Password BIT Card to be issued possible/not 0
32-0073 Function possible 0
32-0074 Level D0 Parking ticket 0=possible 0
32-0075 Unissueable card D1 Pass card 1=impossible 0
32-0076 Operator No.16 Valid/ Invalid D2 Service ticket 1
32-0077 Password D3 Store discount ticket 0
32-0078 Function D4 Discount ticket 0
32-0079 Level D5 Coupon ticket 0
D6 Prepaid card
32-0080 Unissueable card 0
32-0081 Operator No.17 Valid/ Invalid D7 Points card 1
32-0082 Password D8 Reserve 0
32-0083 Function D9 Reserve 0
32-0084 Level D10 Reserve 0
32-0085 Unissueable card 0
D11 Reserve
32-0086 Operator No.18 Valid/ Invalid 1
32-0087 Password D12 Reserve 0
32-0088 Function D13 Reserve 0
32-0089 Level D14 Reserve 0
D15 Reserve
32-0090 Unissueable card 0
32-0091 Operator No.19 Valid/ Invalid D15 D0 1
32-0092 Password 0
32-0093 Function 0
32-0094 Level 0
32-0095 Unissueable card 0
32-0096 Operator No.20 Valid/ Invalid +1 (Parking tkt) 1
32-0097 Password 0
+2 (pass card)
32-0098 Function 0
32-0099 Level +4 (Service tkt) 0
32-0100 Unissueable card 0
32-0101 Operator No.21 Valid/ Invalid +8 (store discount) 1
32-0102 Password 0
+16 (Discount tkt)
32-0103 Function 0
32-0104 Level +32 (Coupon tkt) 0
32-0105 Unissueable card 0
32-0106 Operator No.22 Valid/ Invalid +64 (Prepaid) 1
32-0107 Password +128 (Point card)
0
32-0108 Function 0
32-0109 Level +256 (Reserve) 0
32-0110 Unissueable card 0
32-0111 Operator No.23 Valid/ Invalid 1
32-0112 Password +32768 0
32-0113 Function 0
32-0114 Level 0
32-0115 Unissueable card 0
Setting example: When the parking ticket, coupon ticket,
32-0116 Operator No.24 Valid/ Invalid and prepaid card are not allowed to issue, set 97 because 1
32-0117 Password 1+32+64= 97 0
32-0118 Function 0
32-0119 Level 0
32-0120 Unissueable card 0

- 77 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


32-0121 Operator No.25 Valid/ Invalid [ Valid / Invalid ] 1
32-0122 Password 0= Valid / 1= Invalid 0
32-0123 Function [ Password ] 0
32-0124 Level 0= Not used / 1-9999 0
32-0125 Unissueable card [ function ] 0
32-0126 Operator No.26 Valid/ Invalid 0-3 (3:only for engineer) 1
32-0127 Password [ Level ] 0
32-0128 Function 0-4 0
32-0129 Level [ Unissueable card ] 0
0-65535 (Settings of the unissueable card when issuing the
32-0130 Unissueable card 0
card from the setting operation)
32-0131 Operator No.27 Valid/ Invalid 1
32-0132 Password BIT Card to be issued possible/not 0
32-0133 Function possible 0
32-0134 Level D0 Parking ticket 0=possible 0
32-0135 Unissueable card D1 Pass card 1=impossible 0
32-0136 Operator No.28 Valid/ Invalid D2 Service ticket 1
32-0137 Password D3 Store discount ticket 0
32-0138 Function D4 Discount ticket 0
32-0139 Level D5 Coupon ticket 0
D6 Prepaid card
32-0140 Unissueable card 0
32-0141 Operator No.29 Valid/ Invalid D7 Points card 1
32-0142 Password D8 Reserve 0
32-0143 Function D9 Reserve 0
32-0144 Level D10 Reserve 0
32-0145 Unissueable card 0
D11 Reserve
32-0146 Operator No.30 Valid/ Invalid 1
32-0147 Password D12 Reserve 0
32-0148 Function D13 Reserve 0
32-0149 Level D14 Reserve 0
D15 Reserve
32-0150 Unissueable card 0
32-0151 Operator No.31 Valid/ Invalid D15 D0 1
32-0152 Password 0
32-0153 Function 0
32-0154 Level 0
32-0155 Unissueable card 0
32-0156 Operator No.32 Valid/ Invalid +1 (Parking tkt) 1
32-0157 Password 0
+2 (pass card)
32-0158 Function 0
32-0159 Level +4 (Service tkt) 0
32-0160 Unissueable card 0
32-0161 Operator No.33 Valid/ Invalid +8 (store discount) 1
32-0162 Password 0
+16 (Discount tkt)
32-0163 Function 0
32-0164 Level +32 (Coupon tkt) 0
32-0165 Unissueable card 0
32-0166 Operator No.34 Valid/ Invalid +64 (Prepaid) 1
32-0167 Password +128 (Point card)
0
32-0168 Function 0
32-0169 Level +256 (Reserve) 0
32-0170 Unissueable card 0
32-0171 Operator No.35 Valid/ Invalid 1
32-0172 Password +32768 0
32-0173 Function 0
32-0174 Level 0
32-0175 Unissueable card 0
Setting example: When the parking ticket, coupon ticket,
32-0176 Operator No.36 Valid/ Invalid and prepaid card are not allowed to issue, set 97 because 1
32-0177 Password 1+32+64= 97 0
32-0178 Function 0
32-0179 Level 0
32-0180 Unissueable card 0

- 78 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


32-0181 Operator No.37 Valid/ Invalid [ Valid / Invalid ] 1
32-0182 Password 0= Valid / 1= Invalid 0
32-0183 Function [ Password ] 0
32-0184 Level 0= Not used / 1-9999 0
32-0185 Unissueable card [ function ] 0
32-0186 Operator No.38 Valid/ Invalid 0-3 (3:only for engineer) 1
32-0187 Password [ Level ] 0
32-0188 Function 0-4 0
32-0189 Level [ Unissueable card ] 0
0-65535 (Settings of the unissueable card when issuing the
32-0190 Unissueable card 0
card from the setting operation)
32-0191 Operator No.39 Valid/ Invalid 1
32-0192 Password BIT Card to be issued possible/not 0
32-0193 Function possible 0
32-0194 Level D0 Parking ticket 0=possible 0
32-0195 Unissueable card D1 Pass card 1=impossible 0
32-0196 Operator No.40 Valid/ Invalid D2 Service ticket 1
32-0197 Password D3 Store discount ticket 0
32-0198 Function D4 Discount ticket 0
32-0199 Level D5 Coupon ticket 0
D6 Prepaid card
32-0200 Unissueable card 0
32-0201 Operator No.41 Valid/ Invalid D7 Points card 1
32-0202 Password D8 Reserve 0
32-0203 Function D9 Reserve 0
32-0204 Level D10 Reserve 0
32-0205 Unissueable card 0
D11 Reserve
32-0206 Operator No.42 Valid/ Invalid 1
32-0207 Password D12 Reserve 0
32-0208 Function D13 Reserve 0
32-0209 Level D14 Reserve 0
D15 Reserve
32-0210 Unissueable card 0
32-0211 Operator No.43 Valid/ Invalid D15 D0 1
32-0212 Password 0
32-0213 Function 0
32-0214 Level 0
32-0215 Unissueable card 0
32-0216 Operator No.44 Valid/ Invalid +1 (Parking tkt) 1
32-0217 Password 0
+2 (pass card)
32-0218 Function 0
32-0219 Level +4 (Service tkt) 0
32-0220 Unissueable card 0
32-0221 Operator No.45 Valid/ Invalid +8 (store discount) 1
32-0222 Password 0
+16 (Discount tkt)
32-0223 Function 0
32-0224 Level +32 (Coupon tkt) 0
32-0225 Unissueable card 0
32-0226 Operator No.46 Valid/ Invalid +64 (Prepaid) 1
32-0227 Password +128 (Point card)
0
32-0228 Function 0
32-0229 Level +256 (Reserve) 0
32-0230 Unissueable card 0
32-0231 Operator No.47 Valid/ Invalid 1
32-0232 Password +32768 0
32-0233 Function 0
32-0234 Level 0
32-0235 Unissueable card 0
Setting example: When the parking ticket, coupon ticket,
32-0236 Operator No.48 Valid/ Invalid and prepaid card are not allowed to issue, set 97 because 1
32-0237 Password 1+32+64= 97 0
32-0238 Function 0
32-0239 Level 0
32-0240 Unissueable card 0

- 79 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


32-0241 Operator No.49 Valid/ Invalid [ Valid / Invalid ] 1
32-0242 Password 0= Valid / 1= Invalid 0
32-0243 Function [ Password ] 0
32-0244 Level 0= Not used / 1-9999 0
32-0245 Unissueable card [ function ] 0
32-0246 Operator No.50 Valid/ Invalid 0-3 (3:only for engineer) 1
32-0247 Password [ Level ] 0
32-0248 Function 0-4 0
32-0249 Level [ Unissueable card ] 0
0-65535 (Settings of the unissueable card when issuing the
32-0250 Unissueable card 0
card from the setting operation)

BIT Card to be issued possible/not


possible
D0 Parking ticket 0=possible
D1 Pass card 1=impossible
D2 Service ticket
D3 Store discount ticket
D4 Discount ticket
D5 Coupon ticket
D6 Prepaid card
D7 Points card
D8 Reserve
D9 Reserve
D10 Reserve
D11 Reserve
D12 Reserve
D13 Reserve
D14 Reserve
D15 Reserve
D15 D0

+1 (Parking tkt)

+2 (pass card)

+4 (Service tkt)

+8 (store discount)

+16 (Discount tkt)

+32 (Coupon tkt)

+64 (Prepaid)

+128 (Point card)

+256 (Reserve)

+32768

Setting example: When the parking ticket, coupon ticket,


and prepaid card are not allowed to issue, set 97 because
1+32+64= 97

- 80 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3. Fee Setting
3-1. Fee Calculation Basic Setting
Address Item Setting Range Default 77 79
33-0001 Fee calculation method 0= Day-night zone / 1= Regressive zone 0 550
33-0002 Daily maximum fee type 0= No daily maximum fee 0 551
1= 24 hours maximum fee
2= Time specified daily maximum fee
3= 2 types of time specified daily maximum fee (cannot apply for
regressive zone method)
33-0003 Lost ticket fee calculation [ fee calculation ] 0 552
33-0004 Lost ticket fee rate 0= fixed fee / 1= calculate fee from a specified time / 99= not use 1 552
33-0005 Lost ticket fee data 998= calculated by remote lost ticket data (AKC) 10000 553
33-0006 Fee calculation when rate change signal [ fee rate ] 99
1=ON, 2=OFF 1-12= A-L rate
33-0007 Fee rate when rate change signal 1=ON, [ fee date ] 0
2=OFF In case of fixed fee : 0-999999= 0-999999 yen
33-0008 Data when rate change signal 1=ON, In case of specified time : 0-2359= 0:00-23:59 00
2=OFF
33-0009 Fee calculation when rate change signal 99
1=OFF, 2=ON
33-0010 Fee rate when rate change signal 1=OFF, 0
2=ON
33-0011 Data when rate change signal 1=OFF, 0
2=ON
33-0012 Fee calculation when rate change signal 99
1=ON, 2=ON
33-0013 Fee rate when rate change signal 1=ON, 0
2=ON
33-0014 Fee rate when rate change signal 1=ON, 0
2=ON
33-0015 Handling of unit time surplus 0= Continue / 1= Cut off / 2= Cut off (even though fee rate zone is 0 556
changed, only Block Pattern setting)
33-0016 Handling of unit time surplus when fixed 0= Not add to zone end time. 1 557
fee time zone or pass card time zone 1= Add to zone end time.
started.
33-0017 How to take the fee after time discount or 1 558
1 2 3 4
pass card time zone
How to take the fee after the midnight zone 1: Unused
2: 0=None / 1= follow 3, 4 for the fee after midnight zone
3, 4: How to take fee after time discount or pass card time zone
Day-night zone Regressive zone
0= from basic rate 0, 1= from 1st pattern
1= from additional rate 2-12= from 2-12 pattern
33-0018 How to take the fee for additional payment Day-night zone 1 559
(Include the additional payment cancelled 0= from basic rate
ticket) 1= from additional rate
Regressive zone
0, 1= from 1st pattern.
2-12= from 2-12 pattern.
33-0019 Tax rates 1-9999= 0.01% - 99.99% / 0= No tax. 0 560
33-0020 Tax print 1 2 3 4 1, 2: Unused 0 561
3: Tax rates print on the receipt
0= Print / 1= not print
4: Tax calculation
0= Tax included, Print tax
1= Tax included, Not print tax
2= Tax excluded, Print tax
3= Tax excluded, Not print tax
33-0021 Handling of the fractions of % discount 00= last digit of the discount amount is cut off. 0 562
01= last 2 digits of the discount amount is cut off.
10= last digit of the discounted fee is cut off.
11= last 2 digits of the discounted fee is cut off.
02= below least significant valid digit (1st)
of the discount amount is cut off.
03= less than 5 least significant valid digit (1st)
of the discount amount is cut off.
04= less than 5 for 2nd valid digit of the discount amount is cut off.
12= below least significant valid digit (1st)
of the discounted fee is cut off.
13= less than 5 least significant valid digit (1st)
of the discounted fee is cut off.
14= less than 5 for 2nd valid digit of the discounted fee is cut off.

- 81 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


33-0022 Handling below least significant valid digit 0= Not use / 1-99=1-99 (input the value below which will be cut-off) / 0 563
(1st) for rate over 100= cut off the value
33-0023 Handling of less than 5 least significant 0= Not use / 1-4=1-4 (input the value below which will be cut-off) / 0 564
valid digit (1st) for rate over 5= cut off the value
33-0024 Handling of less than 2nd valid digit for 0= Not use / 1-9=1-9 (input the value below which will be cut-off) / 5 565
rate over 10= cut off the value
33-0025 Handling of less than 5 for 2nd valid digit 0= Not use / 1-4=1-4 (input the value below which will be cut-off) / 0 566
for rate over 5= cut off the value
33-0026 Handling of less than 3rd valid digit for rate 0= Not use / 1-9=1-9 (input the value below which will be cut-off) / 0 567
over 10= cut off the value
33-0027 Tax calculation for the discount amount 0= (fee - discount amount) x (1 + tax rates) 0 568
1= (fee x (1 + tax rates)) - discount amount
33-0028 Prepaid card payment amount 0= tax included (Prepaid card balance - tax included fee) 1 569
1= taxable amount (Prepaid card balance - taxable amount)
If fee= 0, then tax= 0.
33-0029 The fee that will become an object of % 0= Do % discount for the displayed amount 0 570
discount (not available)
33-0030 Duplication of pass card time zone and 0= The duplicated time discount is invalid. 1 571
time discount 1= After the pass card time zone finished, discount the duplicated time
discount.
33-0031 Service time 0-2400= 0 hour 00 minutes - 24 hours 00 minutes 0
33-0032 Grace time 0
33-0033 Lagtime (EPS only) 0
33-0034 Repay time (CPS only)  The paid ticket does not accept within this time. 0
33-0035 Credit card surcharge function (normal [Surcharge function] 0
payment) 0= Not in Use
33-0036 Surcharge data (normal payment) 1= Fee Surcharge 0
33-0037 Credit card surcharge function (pass card 2= % Surcharge 0
renewal)
33-0038 Surcharge data (pass card renewal) [Data] 0
33-0039 Credit card surcharge function (debit card <Function= 1 case> 0-999999= $0-999999 Surcharge 0
sale/recharge) <Function= 2 case> 0-100= 0-100% Surcharge
33-0040 Surcharge data (debit card sale/recharge) 0
33-0041 Handling of the fractions of % surcharge 0= Not use / 1-9=1-9 (input the value below which will be cut-off) / 0
(1st digit) over 10= cut off the value
33-0042 Handling of the fractions of % surcharge 0
(2nd digit)
33-0043
33-0044
33-0045 Time discount limitation 0= Not use / 1-9959= 1-99 hour 59 min 0
33-0046 Discount more than time discount 0= Not use / 1= Use 0
limitation (AKC only)

- 82 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-2. Day Night Zone Fee Calculation Setting


3-2-1. Day Night Zone 1st Rate System
Address Item Setting Range Default 77 79
34-0000 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 600
34-0001 Time discount valid end time 0 601
34-0002 1st rate system usage 0= Not used / I-6= Use from 1st rate zone to 6th rate zone 1 602
34-0003 1st rate zone start time - 1st - 6th rate zone start time 0 603
34-0004 1st rate zone overlapping method and 0-2359=0:00-23:59 0 604
overlapping time Note : 1st rate zone start time is defined as the day
34-0005 1st rate zone basic time change time. 100 605
34-0006 1st rate zone additional time And also it is defined as the specified time for 30 606
34-0007 2nd rate zone start time “time specified daily maximum” 0 607
34-0008 2nd rate zone overlapping method and 0 608
overlapping time - Overlapping method and overlapping time
34-0009 2nd rate zone basic time (1) (2) (3) (4) 0 609
34-0010 2nd rate zone additional time 0 610
34-0011 3rd rate zone start time 0 611
(1) Overlapping method
34-0012 3rd rate zone overlapping method and 0 612
overlapping time Overlapping
zone
34-0013 3rd rate zone basic time B rate Zone 0 613
34-0014 3rd rate zone additional time A rate zone 0 614
34-0015 4th rate zone start time 0 615
34-0016 4th rate zone overlapping method and A B 0 616
overlapping time A
34-0017 4th rate zone basic time B 0 617
34-0018 4th rate zone additional time (X) 0 618
(Y)
34-0019 5th rate zone start time 0 619
34-0020 5th rate zone overlapping method and 0 620
overlapping time
34-0021 5th rate zone basic time In case of (1)= 0, (X) is rate A / (Y) is rate B. 0 621
34-0022 5th rate zone additional time = 1, (X) is rate B / (Y) is rate A. 0 622
34-0023 6th rate zone start time 0 623
34-0024 6th rate zone overlapping method and (2), (3), (4): Overlapping time =0-959 : 0:00-9:59 0 624
overlapping time
34-0025 6th rate zone basic time - Basic time, additional time 0 625
34-0026 6th rate zone additional time 1-959= 0:01-9:59 / 0= Calculate as fixed fee zone 0 626

34-0027 0 627
34-0028 0 628
34-0029 0 629
34-0030 0 630
34-0031 0 631
34-0032 0 632
34-0033 0 633
34-0034 0 634
34-0035 0 635
34-0036 0 636
34-0037 0 637
34-0038 0 638
34-0039 0 639
34-0040 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 640
34-0041 Pass card 1 end time 0-2359= 0:00-23:59 0 641
34-0042 Pass card 2 start time (discount time) 0 642
34-0043 Pass card 2 end time In case of start time = end time, normal pass card 0 643
34-0044 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 644
34-0045 Pass card 3 end time 0 645
34-0046 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 646
34-0047 Pass card 4 end time 0-959= 0:00-9:59 0 647
34-0048 Pass card 5 start time (discount time) 0 648
34-0049 Pass card 5 end time 0 649
34-0050 Pass card 6 start time (discount time) 0 650
34-0051 Pass card 6 end time 0 651
34-0052 Pass card 7 start time (discount time) 0 652
34-0053 Pass card 7 end time 0 653
34-0054 Pass card 8 start time (discount time) 0 654
34-0055 Pass card 8 end time 0 655
34-0056 0 656
34-0057 0 657
34-0058 0 658
34-0059 0 659

- 83 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 1st Rate System)


Address Item Setting Range Default 77 79
34-0060 A rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 999900 660
34-0061 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 661
34-0062 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 662
34-0063 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 200 663
34-0064 1st rate zone additional rate 100 664
34-0065 2nd rate zone basic rate 0 665
34-0066 2nd rate zone additional rate 0 666
34-0067 3rd rate zone basic rate 0 667
34-0068 3rd rate zone additional rate 0 668
34-0069 4th rate zone basic rate 0 669
34-0070 4th rate zone additional rate 0 670
34-0071 5th rate zone basic rate 0 671
34-0072 5th rate zone additional rate 0 672
34-0073 6th rate zone basic rate 0 673
34-0074 6th rate zone additional rate 0 674
34-0075 0 675
34-0076 0 676
34-0077 0 677
34-0078 0 678
34-0079 0 679
34-0080 B rate absolute maximum fee. 0 680
34-0081 Daily maximum fee (1st) 0 681
34-0082 Daily maximum fee (2nd) 0 682
34-0083 1st rate zone basic rate 0 683
34-0084 1st rate zone additional rate 0 684
34-0085 2nd rate zone basic rate 0 685
34-0086 2nd rate zone additional rate 0 686
34-0087 3rd rate zone basic rate 0 687
34-0088 3rd rate zone additional rate 0 688
34-0089 4th rate zone basic rate 0 689
34-0090 4th rate zone additional rate 0 690
34-0091 5th rate zone basic rate 0 691
34-0092 5th rate zone additional rate 0 692
34-0093 6th rate zone basic rate 0 693
34-0094 6th rate zone additional rate 0 694
34-0095 0 695
34-0096 0 696
34-0097 0 697
34-0098 0 698
34-0099 0 699
34-0100 C rate absolute maximum fee. 0 700
34-0101 Daily maximum fee (1st) 0 701
34-0102 Daily maximum fee (2nd) 0 702
34-0103 1st rate zone basic rate 0 703
34-0104 1st rate zone additional rate 0 704
34-0105 2nd rate zone basic rate 0 705
34-0106 2nd rate zone additional rate 0 706
34-0107 3rd rate zone basic rate 0 707
34-0108 3rd rate zone additional rate 0 708
34-0109 4th rate zone basic rate 0 709
34-0110 4th rate zone additional rate 0 710
34-0111 5th rate zone basic rate 0 711
34-0112 5th rate zone additional rate 0 712
34-0113 6th rate zone basic rate 0 713
34-0114 6th rate zone additional rate 0 714
34-0115 0 715
34-0116 0 716
34-0117 0 717
34-0118 0 718
34-0119 0 719

- 84 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 1st Rate System)


Address Item Setting Range Default 77 79
34-0120 D rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 720
34-0121 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 721
34-0122 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 722
34-0123 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 723
34-0124 1st rate zone additional rate 0 724
34-0125 2nd rate zone basic rate 0 725
34-0126 2nd rate zone additional rate 0 726
34-0127 3rd rate zone basic rate 0 727
34-0128 3rd rate zone additional rate 0 728
34-0129 4th rate zone basic rate 0 729
34-0130 4th rate zone additional rate 0 730
34-0131 5th rate zone basic rate 0 731
34-0132 5th rate zone additional rate 0 732
34-0133 6th rate zone basic rate 0 733
34-0134 6th rate zone additional rate 0 734
34-0135 0 735
34-0136 0 736
34-0137 0 737
34-0138 0 738
34-0139 0 739
34-0140 E rate absolute maximum fee. 0 740
34-0141 Daily maximum fee (1st) 0 741
34-0142 Daily maximum fee (2nd) 0 742
34-0143 1st rate zone basic rate 0 743
34-0144 1st rate zone additional rate 0 744
34-0145 2nd rate zone basic rate 0 745
34-0146 2nd rate zone additional rate 0 746
34-0147 3rd rate zone basic rate 0 747
34-0148 3rd rate zone additional rate 0 748
34-0149 4th rate zone basic rate 0 749
34-0150 4th rate zone additional rate 0 750
34-0151 5th rate zone basic rate 0 751
34-0152 5th rate zone additional rate 0 752
34-0153 6th rate zone basic rate 0 753
34-0154 6th rate zone additional rate 0 754
34-0155 0 755
34-0156 0 756
34-0157 0 757
34-0158 0 758
34-0159 0 759
34-0160 F rate absolute maximum fee. 0 760
34-0161 Daily maximum fee (1st) 0 761
34-0162 Daily maximum fee (2nd) 0 762
34-0163 1st rate zone basic rate 0 763
34-0164 1st rate zone additional rate 0 764
34-0165 2nd rate zone basic rate 0 765
34-0166 2nd rate zone additional rate 0 766
34-0167 3rd rate zone basic rate 0 767
34-0168 3rd rate zone additional rate 0 768
34-0169 4th rate zone basic rate 0 769
34-0170 4th rate zone additional rate 0 770
34-0171 5th rate zone basic rate 0 771
34-0172 5th rate zone additional rate 0 772
34-0173 6th rate zone basic rate 0 773
34-0174 6th rate zone additional rate 0 774
34-0175 0 775
34-0176 0 776
34-0177 0 777
34-0178 0 778
34-0179 0 779

- 85 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 1st Rate System)


Address Item Setting Range Default 79
34-0180 G rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 780
34-0181 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 781
34-0182 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 782
34-0183 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 783
34-0184 1st rate zone additional rate 0 784
34-0185 2nd rate zone basic rate 0 785
34-0186 2nd rate zone additional rate 0 786
34-0187 3rd rate zone basic rate 0 787
34-0188 3rd rate zone additional rate 0 788
34-0189 4th rate zone basic rate 0 789
34-0190 4th rate zone additional rate 0 790
34-0191 5th rate zone basic rate 0 791
34-0192 5th rate zone additional rate 0 792
34-0193 6th rate zone basic rate 0 793
34-0194 6th rate zone additional rate 0 794
34-0195 0 795
34-0196 0 796
34-0197 0 797
34-0198 0 798
34-0199 0 799
34-0200 H rate absolute maximum fee. 0 800
34-0201 Daily maximum fee (1st) 0 801
34-0202 Daily maximum fee (2nd) 0 802
34-0203 1st rate zone basic rate 0 803
34-0204 1st rate zone additional rate 0 804
34-0205 2nd rate zone basic rate 0 805
34-0206 2nd rate zone additional rate 0 806
34-0207 3rd rate zone basic rate 0 807
34-0208 3rd rate zone additional rate 0 808
34-0209 4th rate zone basic rate 0 809
34-0210 4th rate zone additional rate 0 810
34-0211 5th rate zone basic rate 0 811
34-0212 5th rate zone additional rate 0 812
34-0213 6th rate zone basic rate 0 813
34-0214 6th rate zone additional rate 0 814
34-0215 0 815
34-0216 0 816
34-0217 0 817
34-0218 0 818
34-0219 0 819
34-0220 I rate absolute maximum fee. 0 820
34-0221 Daily maximum fee (1st) 0 821
34-0222 Daily maximum fee (2nd) 0 822
34-0223 1st rate zone basic rate 0 823
34-0224 1st rate zone additional rate 0 824
34-0225 2nd rate zone basic rate 0 825
34-0226 2nd rate zone additional rate 0 826
34-0227 3rd rate zone basic rate 0 827
34-0228 3rd rate zone additional rate 0 828
34-0229 4th rate zone basic rate 0 829
34-0230 4th rate zone additional rate 0 830
34-0231 5th rate zone basic rate 0 831
34-0232 5th rate zone additional rate 0 832
34-0233 6th rate zone basic rate 0 833
34-0234 6th rate zone additional rate 0 834
34-0235 0 835
34-0236 0 836
34-0237 0 837
34-0238 0 838
34-0239 0 839

- 86 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 1st Rate System)


Address Item Setting Range Default 77 79
34-0240 J rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 840
34-0241 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 841
34-0242 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 842
34-0243 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 843
34-0244 1st rate zone additional rate 0 844
34-0245 2nd rate zone basic rate 0 845
34-0246 2nd rate zone additional rate 0 846
34-0247 3rd rate zone basic rate 0 847
34-0248 3rd rate zone additional rate 0 848
34-0249 4th rate zone basic rate 0 849
34-0250 4th rate zone additional rate 0 850
34-0251 5th rate zone basic rate 0 851
34-0252 5th rate zone additional rate 0 852
34-0253 6th rate zone basic rate 0 853
34-0254 6th rate zone additional rate 0 854
34-0255 0 855
34-0256 0 856
34-0257 0 857
34-0258 0 858
34-0259 0 859
34-0260 K rate absolute maximum fee. 0 860
34-0261 Daily maximum fee (1st) 0 861
34-0262 Daily maximum fee (2nd) 0 862
34-0263 1st rate zone basic rate 0 863
34-0264 1st rate zone additional rate 0 864
34-0265 2nd rate zone basic rate 0 865
34-0266 2nd rate zone additional rate 0 866
34-0267 3rd rate zone basic rate 0 867
34-0268 3rd rate zone additional rate 0 868
34-0269 4th rate zone basic rate 0 869
34-0270 4th rate zone additional rate 0 870
34-0271 5th rate zone basic rate 0 871
34-0272 5th rate zone additional rate 0 872
34-0273 6th rate zone basic rate 0 873
34-0274 6th rate zone additional rate 0 874
34-0275 0 875
34-0276 0 876
34-0277 0 877
34-0278 0 878
34-0279 0 879
34-0280 L rate absolute maximum fee. 0 880
34-0281 Daily maximum fee (1st) 0 881
34-0282 Daily maximum fee (2nd) 0 882
34-0283 1st rate zone basic rate 0 883
34-0284 1st rate zone additional rate 0 884
34-0285 2nd rate zone basic rate 0 885
34-0286 2nd rate zone additional rate 0 886
34-0287 3rd rate zone basic rate 0 887
34-0288 3rd rate zone additional rate 0 888
34-0289 4th rate zone basic rate 0 889
34-0290 4th rate zone additional rate 0 890
34-0291 5th rate zone basic rate 0 891
34-0292 5th rate zone additional rate 0 892
34-0293 6th rate zone basic rate 0 893
34-0294 6th rate zone additional rate 0 894
34-0295 0 895
34-0296 0 896
34-0297 0 897
34-0298 0 898
34-0299 0 899

- 87 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-2-2. Day Night Zone 2nd Rate System


Address Item Setting Range Default 77 79
34-0300 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 600
34-0301 Time discount valid end time 0 601
34-0302 2nd rate system usage 0= Not used / I-6= Use from 1st rate zone to 6th rate zone 0 602
34-0303 1st rate zone start time - 1st - 6th rate zone start time 0 603
34-0304 1st rate zone overlapping method and 0-2359=0:00-23:59 0 604
overlapping time Note : 1st rate zone start time is defined as the day
34-0305 1st rate zone basic time change time. 0 605
34-0306 1st rate zone additional time And also it is defined as the specified time for 0 606
34-0307 2nd rate zone start time “time specified daily maximum” 0 607
34-0308 2nd rate zone overlapping method and 0 608
overlapping time - Overlapping method and overlapping time
34-0309 2nd rate zone basic time (1) (2) (3) (4) 0 609
34-0310 2nd rate zone additional time 0 610
34-0311 3rd rate zone start time 0 611
(1) Overlapping method
34-0312 3rd rate zone overlapping method and 0 612
overlapping time Overlapping
zone
34-0313 3rd rate zone basic time B rate Zone 0 613
34-0314 3rd rate zone additional time A rate zone 0 614
34-0315 4th rate zone start time 0 615
34-0316 4th rate zone overlapping method and A B 0 616
overlapping time A
34-0317 4th rate zone basic time B 0 617
34-0318 4th rate zone additional time (X) 0 618
(Y)
34-0319 5th rate zone start time 0 619
34-0320 5th rate zone overlapping method and 0 620
overlapping time
34-0321 5th rate zone basic time In case of (1)= 0, (X) is rate A / (Y) is rate B. 0 621
34-0322 5th rate zone additional time = 1, (X) is rate B / (Y) is rate A. 0 622
34-0323 6th rate zone start time 0 623
34-0324 6th rate zone overlapping method and (2), (3), (4): Overlapping time =0-959 : 0:00-9:59 0 624
overlapping time
34-0325 6th rate zone basic time - Basic time, additional time 0 625
34-0326 6th rate zone additional time 1-959= 0:01-9:59 / 0= Calculate as fixed fee zone 0 626

34-0327 0 627
34-0328 0 628
34-0329 0 629
34-0330 0 630
34-0331 0 631
34-0332 0 632
34-0333 0 633
34-0334 0 634
34-0335 0 635
34-0336 0 636
34-0337 0 637
34-0338 0 638
34-0339 0 639
34-0340 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 640
34-0341 Pass card 1 end time 0-2359= 0:00-23:59 0 641
34-0342 Pass card 2 start time (discount time) 0 642
34-0343 Pass card 2 end time In case of start time = end time, normal pass card 0 643
34-0344 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 644
34-0345 Pass card 3 end time 0 645
34-0346 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 646
34-0347 Pass card 4 end time 0-959= 0:00-9:59 0 647
34-0348 Pass card 5 start time (discount time) 0 648
34-0349 Pass card 5 end time 0 649
34-0350 Pass card 6 start time (discount time) 0 650
34-0351 Pass card 6 end time 0 651
34-0352 Pass card 7 start time (discount time) 0 652
34-0353 Pass card 7 end time 0 653
34-0354 Pass card 8 start time (discount time) 0 654
34-0355 Pass card 8 end time 0 655
34-0356 0 656
34-0357 0 657
34-0358 0 658
34-0359 0 659

- 88 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 2nd Rate System)


Address Item Setting Range Default 77 79
34-0360 A rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 960
34-0361 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 961
34-0362 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 962
34-0363 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 963
34-0364 1st rate zone additional rate 0 964
34-0365 2nd rate zone basic rate 0 965
34-0366 2nd rate zone additional rate 0 966
34-0367 3rd rate zone basic rate 0 967
34-0368 3rd rate zone additional rate 0 968
34-0369 4th rate zone basic rate 0 969
34-0370 4th rate zone additional rate 0 970
34-0371 5th rate zone basic rate 0 971
34-0372 5th rate zone additional rate 0 972
34-0373 6th rate zone basic rate 0 973
34-0374 6th rate zone additional rate 0 974
34-0375 0 975
34-0376 0 976
34-0377 0 977
34-0378 0 978
34-0379 0 979
34-0380 B rate absolute maximum fee. 0 980
34-0381 Daily maximum fee (1st) 0 981
34-0382 Daily maximum fee (2nd) 0 982
34-0383 1st rate zone basic rate 0 983
34-0384 1st rate zone additional rate 0 984
34-0385 2nd rate zone basic rate 0 985
34-0386 2nd rate zone additional rate 0 986
34-0387 3rd rate zone basic rate 0 987
34-0388 3rd rate zone additional rate 0 988
34-0389 4th rate zone basic rate 0 989
34-0390 4th rate zone additional rate 0 990
34-0391 5th rate zone basic rate 0 991
34-0392 5th rate zone additional rate 0 992
34-0393 6th rate zone basic rate 0 993
34-0394 6th rate zone additional rate 0 994
34-0395 0 995
34-0396 0 996
34-0397 0 997
34-0398 0 998
34-0399 0 999
34-0400 C rate absolute maximum fee. 0 00
34-0401 Daily maximum fee (1st) 0 01
34-0402 Daily maximum fee (2nd) 0 02
34-0403 1st rate zone basic rate 0 03
34-0404 1st rate zone additional rate 0 1004
34-0405 2nd rate zone basic rate 0 1005
34-0406 2nd rate zone additional rate 0 1006
34-0407 3rd rate zone basic rate 0 1007
34-0408 3rd rate zone additional rate 0 1008
34-0409 4th rate zone basic rate 0 1009
34-0410 4th rate zone additional rate 0 1010
34-0411 5th rate zone basic rate 0 1011
34-0412 5th rate zone additional rate 0 1012
34-0413 6th rate zone basic rate 0 1013
34-0414 6th rate zone additional rate 0 1014
34-0415 0 1015
34-0416 0 1016
34-0417 0 1017
34-0418 0 1018
34-0419 0 1019

- 89 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 2nd Rate System)


Address Item Setting Range Default 77 79
34-0420 D rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1020
34-0421 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1021
34-0422 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1022
34-0423 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1023
34-0424 1st rate zone additional rate 0 1024
34-0425 2nd rate zone basic rate 0 1025
34-0426 2nd rate zone additional rate 0 1026
34-0427 3rd rate zone basic rate 0 1027
34-0428 3rd rate zone additional rate 0 1028
34-0429 4th rate zone basic rate 0 1029
34-0430 4th rate zone additional rate 0 1030
34-0431 5th rate zone basic rate 0 1031
34-0432 5th rate zone additional rate 0 1032
34-0433 6th rate zone basic rate 0 1033
34-0434 6th rate zone additional rate 0 1034
34-0435 0 1035
34-0436 0 1036
34-0437 0 1037
34-0438 0 1038
34-0439 0 1039
34-0440 E rate absolute maximum fee. 0 1040
34-0441 Daily maximum fee (1st) 0 1041
34-0442 Daily maximum fee (2nd) 0 1042
34-0443 1st rate zone basic rate 0 1043
34-0444 1st rate zone additional rate 0 1044
34-0445 2nd rate zone basic rate 0 1045
34-0446 2nd rate zone additional rate 0 1046
34-0447 3rd rate zone basic rate 0 1047
34-0448 3rd rate zone additional rate 0 1048
34-0449 4th rate zone basic rate 0 1049
34-0450 4th rate zone additional rate 0 1050
34-0451 5th rate zone basic rate 0 1051
34-0452 5th rate zone additional rate 0 1052
34-0453 6th rate zone basic rate 0 1053
34-0454 6th rate zone additional rate 0 1054
34-0455 0 1055
34-0456 0 1056
34-0457 0 1057
34-0458 0 1058
34-0459 0 1059
34-0460 F rate absolute maximum fee. 0 1060
34-0461 Daily maximum fee (1st) 0 1061
34-0462 Daily maximum fee (2nd) 0 1062
34-0463 1st rate zone basic rate 0 1063
34-0464 1st rate zone additional rate 0 1064
34-0465 2nd rate zone basic rate 0 1065
34-0466 2nd rate zone additional rate 0 1066
34-0467 3rd rate zone basic rate 0 1067
34-0468 3rd rate zone additional rate 0 1068
34-0469 4th rate zone basic rate 0 1069
34-0470 4th rate zone additional rate 0 1070
34-0471 5th rate zone basic rate 0 1071
34-0472 5th rate zone additional rate 0 1072
34-0473 6th rate zone basic rate 0 1073
34-0474 6th rate zone additional rate 0 1074
34-0475 0 1075
34-0476 0 1076
34-0477 0 1077
34-0478 0 1078
34-0479 0 1079

- 90 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 2nd Rate System)


Address Item Setting Range Default 77 79
34-0480 G rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1080
34-0481 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1081
34-0482 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1082
34-0483 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1083
34-0484 1st rate zone additional rate 0 1084
34-0485 2nd rate zone basic rate 0 1085
34-0486 2nd rate zone additional rate 0 1086
34-0487 3rd rate zone basic rate 0 1087
34-0488 3rd rate zone additional rate 0 1088
34-0489 4th rate zone basic rate 0 1089
34-0490 4th rate zone additional rate 0 1090
34-0491 5th rate zone basic rate 0 1091
34-0492 5th rate zone additional rate 0 1092
34-0493 6th rate zone basic rate 0 1093
34-0494 6th rate zone additional rate 0 1094
34-0495 0 1095
34-0496 0 1096
34-0497 0 1097
34-0498 0 1098
34-0499 0 1099
34-0500 H rate absolute maximum fee. 0 1100
34-0501 Daily maximum fee (1st) 0 1101
34-0502 Daily maximum fee (2nd) 0 1102
34-0503 1st rate zone basic rate 0 1103
34-0504 1st rate zone additional rate 0 1104
34-0505 2nd rate zone basic rate 0 1105
34-0506 2nd rate zone additional rate 0 1106
34-0507 3rd rate zone basic rate 0 1107
34-0508 3rd rate zone additional rate 0 1108
34-0509 4th rate zone basic rate 0 1109
34-0510 4th rate zone additional rate 0 1110
34-0511 5th rate zone basic rate 0 1111
34-0512 5th rate zone additional rate 0 1112
34-0513 6th rate zone basic rate 0 1113
34-0514 6th rate zone additional rate 0 1114
34-0515 0 1115
34-0516 0 1116
34-0517 0 1117
34-0518 0 1118
34-0519 0 1119
34-0520 I rate absolute maximum fee. 0 1120
34-0521 Daily maximum fee (1st) 0 1121
34-0522 Daily maximum fee (2nd) 0 1122
34-0523 1st rate zone basic rate 0 1123
34-0524 1st rate zone additional rate 0 1124
34-0525 2nd rate zone basic rate 0 1125
34-0526 2nd rate zone additional rate 0 1126
34-0527 3rd rate zone basic rate 0 1127
34-0528 3rd rate zone additional rate 0 1128
34-0529 4th rate zone basic rate 0 1129
34-0530 4th rate zone additional rate 0 1130
34-0531 5th rate zone basic rate 0 1131
34-0532 5th rate zone additional rate 0 1132
34-0533 6th rate zone basic rate 0 1133
34-0534 6th rate zone additional rate 0 1134
34-0535 0 1135
34-0536 0 1136
34-0537 0 1137
34-0538 0 1138
34-0539 0 1139

- 91 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 2nd Rate System)


Address Item Setting Range Default 77 79
34-0540 J rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1140
34-0541 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1141
34-0542 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1142
34-0543 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1143
34-0544 1st rate zone additional rate 0 1144
34-0545 2nd rate zone basic rate 0 1145
34-0546 2nd rate zone additional rate 0 1146
34-0547 3rd rate zone basic rate 0 1147
34-0548 3rd rate zone additional rate 0 1148
34-0549 4th rate zone basic rate 0 1149
34-0550 4th rate zone additional rate 0 1150
34-0551 5th rate zone basic rate 0 1151
34-0552 5th rate zone additional rate 0 1152
34-0553 6th rate zone basic rate 0 1153
34-0554 6th rate zone additional rate 0 1154
34-0555 0 1155
34-0556 0 1156
34-0557 0 1157
34-0558 0 1158
34-0559 0 1159
34-0560 K rate absolute maximum fee. 0 1160
34-0561 Daily maximum fee (1st) 0 1161
34-0562 Daily maximum fee (2nd) 0 1162
34-0563 1st rate zone basic rate 0 1163
34-0564 1st rate zone additional rate 0 1164
34-0565 2nd rate zone basic rate 0 1165
34-0566 2nd rate zone additional rate 0 1166
34-0567 3rd rate zone basic rate 0 1167
34-0568 3rd rate zone additional rate 0 1168
34-0569 4th rate zone basic rate 0 1169
34-0570 4th rate zone additional rate 0 1170
34-0571 5th rate zone basic rate 0 1171
34-0572 5th rate zone additional rate 0 1172
34-0573 6th rate zone basic rate 0 1173
34-0574 6th rate zone additional rate 0 1174
34-0575 0 1175
34-0576 0 1176
34-0577 0 1177
34-0578 0 1178
34-0579 0 1179
34-0580 L rate absolute maximum fee. 0 1180
34-0581 Daily maximum fee (1st) 0 1181
34-0582 Daily maximum fee (2nd) 0 1182
34-0583 1st rate zone basic rate 0 1183
34-0584 1st rate zone additional rate 0 1184
34-0585 2nd rate zone basic rate 0 1185
34-0586 2nd rate zone additional rate 0 1186
34-0587 3rd rate zone basic rate 0 1187
34-0588 3rd rate zone additional rate 0 1188
34-0589 4th rate zone basic rate 0 1189
34-0590 4th rate zone additional rate 0 1190
34-0591 5th rate zone basic rate 0 1191
34-0592 5th rate zone additional rate 0 1192
34-0593 6th rate zone basic rate 0 1193
34-0594 6th rate zone additional rate 0 1194
34-0595 0 1195
34-0596 0 1196
34-0597 0 1197
34-0598 0 1198
34-0599 0 1199

- 92 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-2-3. Day Night Zone 3rd Rate System


Address Item Setting Range Default 77 79
34-0600 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 1200
34-0601 Time discount valid end time 0 1201
34-0602 3rd rate system usage 0= Not used / I-6= Use from 1st rate zone to 6th rate zone 0 1202
34-0603 1st rate zone start time - 1st - 6th rate zone start time 0 1203
34-0604 1st rate zone overlapping method and 0-2359=0:00-23:59 0 1204
overlapping time Note : 1st rate zone start time is defined as the day
34-0605 1st rate zone basic time change time. 0 1205
34-0606 1st rate zone additional time And also it is defined as the specified time for 0 1206
34-0607 2nd rate zone start time “time specified daily maximum” 0 1207
34-0608 2nd rate zone overlapping method and 0 1208
overlapping time - Overlapping method and overlapping time
34-0609 2nd rate zone basic time (1) (2) (3) (4) 0 1209
34-0610 2nd rate zone additional time 0 1210
34-0611 3rd rate zone start time 0 1211
(1) Overlapping method
34-0612 3rd rate zone overlapping method and 0 1212
overlapping time Overlapping
zone
34-0613 3rd rate zone basic time B rate Zone 0 1213
34-0614 3rd rate zone additional time A rate zone 0 1214
34-0615 4th rate zone start time 0 1215
34-0616 4th rate zone overlapping method and A B 0 1216
overlapping time A
34-0617 4th rate zone basic time B 0 1217
34-0618 4th rate zone additional time (X) 0 1218
(Y)
34-0619 5th rate zone start time 0 1219
34-0620 5th rate zone overlapping method and 0 1220
overlapping time
34-0621 5th rate zone basic time In case of (1)= 0, (X) is rate A / (Y) is rate B. 0 1221
34-0622 5th rate zone additional time = 1, (X) is rate B / (Y) is rate A. 0 1222
34-0623 6th rate zone start time 0 1223
34-0624 6th rate zone overlapping method and (2), (3), (4): Overlapping time =0-959 : 0:00-9:59 0 1224
overlapping time
34-0625 6th rate zone basic time - Basic time, additional time 0 1225
34-0626 6th rate zone additional time 1-959= 0:01-9:59 / 0= Calculate as fixed fee zone 0 1226

34-0627 0 1227
34-0628 0 1228
34-0629 0 1229
34-0630 0 1230
34-0631 0 1231
34-0632 0 1232
34-0633 0 1233
34-0634 0 1234
34-0635 0 1235
34-0636 0 1236
34-0637 0 1237
34-0638 0 1238
34-0639 0 1239
34-0640 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 1240
34-0641 Pass card 1 end time 0-2359= 0:00-23:59 0 1241
34-0642 Pass card 2 start time (discount time) 0 1242
34-0643 Pass card 2 end time In case of start time = end time, normal pass card 0 1243
34-0644 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 1244
34-0645 Pass card 3 end time 0 1245
34-0646 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 1246
34-0647 Pass card 4 end time 0-959= 0:00-9:59 0 1247
34-0648 Pass card 5 start time (discount time) 0 1248
34-0649 Pass card 5 end time 0 1249
34-0650 Pass card 6 start time (discount time) 0 1250
34-0651 Pass card 6 end time 0 1251
34-0652 Pass card 7 start time (discount time) 0 1252
34-0653 Pass card 7 end time 0 1253
34-0654 Pass card 8 start time (discount time) 0 1254
34-0655 Pass card 8 end time 0 1255
34-0656 0 1256
34-0657 0 1257
34-0658 0 1258
34-0659 0 1259

- 93 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 3rd Rate System)


Address Item Setting Range Default 77 79
34-0660 A rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1260
34-0661 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1261
34-0662 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1262
34-0663 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1263
34-0664 1st rate zone additional rate 0 1264
34-0665 2nd rate zone basic rate 0 1265
34-0666 2nd rate zone additional rate 0 1266
34-0667 3rd rate zone basic rate 0 1267
34-0668 3rd rate zone additional rate 0 1268
34-0669 4th rate zone basic rate 0 1269
34-0670 4th rate zone additional rate 0 1270
34-0671 5th rate zone basic rate 0 1271
34-0672 5th rate zone additional rate 0 1272
34-0673 6th rate zone basic rate 0 1273
34-0674 6th rate zone additional rate 0 1274
34-0675 0 1275
34-0676 0 1276
34-0677 0 1277
34-0678 0 1278
34-0679 0 1279
34-0680 B rate absolute maximum fee. 0 1280
34-0681 Daily maximum fee (1st) 0 1281
34-0682 Daily maximum fee (2nd) 0 1282
34-0683 1st rate zone basic rate 0 1283
34-0684 1st rate zone additional rate 0 1284
34-0685 2nd rate zone basic rate 0 1285
34-0686 2nd rate zone additional rate 0 1286
34-0687 3rd rate zone basic rate 0 1287
34-0688 3rd rate zone additional rate 0 1288
34-0689 4th rate zone basic rate 0 1289
34-0690 4th rate zone additional rate 0 1290
34-0691 5th rate zone basic rate 0 1291
34-0692 5th rate zone additional rate 0 1292
34-0693 6th rate zone basic rate 0 1293
34-0694 6th rate zone additional rate 0 1294
34-0695 0 1295
34-0696 0 1296
34-0697 0 1297
34-0698 0 1298
34-0699 0 1299
34-0700 C rate absolute maximum fee. 0 1300
34-0701 Daily maximum fee (1st) 0 1301
34-0702 Daily maximum fee (2nd) 0 1302
34-0703 1st rate zone basic rate 0 1303
34-0704 1st rate zone additional rate 0 1304
34-0705 2nd rate zone basic rate 0 1305
34-0706 2nd rate zone additional rate 0 1306
34-0707 3rd rate zone basic rate 0 1307
34-0708 3rd rate zone additional rate 0 1308
34-0709 4th rate zone basic rate 0 1309
34-0710 4th rate zone additional rate 0 1310
34-0711 5th rate zone basic rate 0 1311
34-0712 5th rate zone additional rate 0 1312
34-0713 6th rate zone basic rate 0 1313
34-0714 6th rate zone additional rate 0 1314
34-0715 0 1315
34-0716 0 1316
34-0717 0 1317
34-0718 0 1318
34-0719 0 1319

- 94 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 3rd Rate System)


Address Item Setting Range Default 77 79
34-0720 D rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1320
34-0721 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1321
34-0722 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1322
34-0723 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1323
34-0724 1st rate zone additional rate 0 1324
34-0725 2nd rate zone basic rate 0 1325
34-0726 2nd rate zone additional rate 0 1326
34-0727 3rd rate zone basic rate 0 1327
34-0728 3rd rate zone additional rate 0 1328
34-0729 4th rate zone basic rate 0 1329
34-0730 4th rate zone additional rate 0 1330
34-0731 5th rate zone basic rate 0 1331
34-0732 5th rate zone additional rate 0 1332
34-0733 6th rate zone basic rate 0 1333
34-0734 6th rate zone additional rate 0 1334
34-0735 0 1335
34-0736 0 1336
34-0737 0 1337
34-0738 0 1338
34-0739 0 1339
34-0740 E rate absolute maximum fee. 0 1340
34-0741 Daily maximum fee (1st) 0 1341
34-0742 Daily maximum fee (2nd) 0 1342
34-0743 1st rate zone basic rate 0 1343
34-0744 1st rate zone additional rate 0 1344
34-0745 2nd rate zone basic rate 0 1345
34-0746 2nd rate zone additional rate 0 1346
34-0747 3rd rate zone basic rate 0 1347
34-0748 3rd rate zone additional rate 0 1348
34-0749 4th rate zone basic rate 0 1349
34-0750 4th rate zone additional rate 0 1350
34-0751 5th rate zone basic rate 0 1351
34-0752 5th rate zone additional rate 0 1352
34-0753 6th rate zone basic rate 0 1353
34-0754 6th rate zone additional rate 0 1354
34-0755 0 1355
34-0756 0 1356
34-0757 0 1357
34-0758 0 1358
34-0759 0 1359
34-0760 F rate absolute maximum fee. 0 1360
34-0761 Daily maximum fee (1st) 0 1361
34-0762 Daily maximum fee (2nd) 0 1362
34-0763 1st rate zone basic rate 0 1363
34-0764 1st rate zone additional rate 0 1364
34-0765 2nd rate zone basic rate 0 1365
34-0766 2nd rate zone additional rate 0 1366
34-0767 3rd rate zone basic rate 0 1367
34-0768 3rd rate zone additional rate 0 1368
34-0769 4th rate zone basic rate 0 1369
34-0770 4th rate zone additional rate 0 1370
34-0771 5th rate zone basic rate 0 1371
34-0772 5th rate zone additional rate 0 1372
34-0773 6th rate zone basic rate 0 1373
34-0774 6th rate zone additional rate 0 1374
34-0775 0 1375
34-0776 0 1376
34-0777 0 1377
34-0778 0 1378
34-0779 0 1379

- 95 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 3rd Rate System)


Address Item Setting Range Default 77 79
34-0780 G rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1380
34-0781 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1381
34-0782 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1382
34-0783 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1383
34-0784 1st rate zone additional rate 0 1384
34-0785 2nd rate zone basic rate 0 1385
34-0786 2nd rate zone additional rate 0 1386
34-0787 3rd rate zone basic rate 0 1387
34-0788 3rd rate zone additional rate 0 1388
34-0789 4th rate zone basic rate 0 1389
34-0790 4th rate zone additional rate 0 1390
34-0791 5th rate zone basic rate 0 1391
34-0792 5th rate zone additional rate 0 1392
34-0793 6th rate zone basic rate 0 1393
34-0794 6th rate zone additional rate 0 1394
34-0795 0 1395
34-0796 0 1396
34-0797 0 1397
34-0798 0 1398
34-0799 0 1399
34-0800 H rate absolute maximum fee. 0 1400
34-0801 Daily maximum fee (1st) 0 1401
34-0802 Daily maximum fee (2nd) 0 1402
34-0803 1st rate zone basic rate 0 1403
34-0804 1st rate zone additional rate 0 1404
34-0805 2nd rate zone basic rate 0 1405
34-0806 2nd rate zone additional rate 0 1406
34-0807 3rd rate zone basic rate 0 1407
34-0808 3rd rate zone additional rate 0 1408
34-0809 4th rate zone basic rate 0 1409
34-0810 4th rate zone additional rate 0 1410
34-0811 5th rate zone basic rate 0 1411
34-0812 5th rate zone additional rate 0 1412
34-0813 6th rate zone basic rate 0 1413
34-0814 6th rate zone additional rate 0 1414
34-0815 0 1415
34-0816 0 1416
34-0817 0 1417
34-0818 0 1418
34-0819 0 1419
34-0820 I rate absolute maximum fee. 0 1420
34-0821 Daily maximum fee (1st) 0 1421
34-0822 Daily maximum fee (2nd) 0 1422
34-0823 1st rate zone basic rate 0 1423
34-0824 1st rate zone additional rate 0 1424
34-0825 2nd rate zone basic rate 0 1425
34-0826 2nd rate zone additional rate 0 1426
34-0827 3rd rate zone basic rate 0 1427
34-0828 3rd rate zone additional rate 0 1428
34-0829 4th rate zone basic rate 0 1429
34-0830 4th rate zone additional rate 0 1430
34-0831 5th rate zone basic rate 0 1431
34-0832 5th rate zone additional rate 0 1432
34-0833 6th rate zone basic rate 0 1433
34-0834 6th rate zone additional rate 0 1434
34-0835 0 1435
34-0836 0 1436
34-0837 0 1437
34-0838 0 1438
34-0839 0 1439

- 96 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Day Night Zone 3rd Rate System)


Address Item Setting Range Default 77 79
34-0840 J rate absolute maximum fee. Absolute maximum fee: 0-999999= 0-999999 yen 0 1440
34-0841 Daily maximum fee (1st) Daily maximum fee: 0-999999= 0-999999 yen 0 1441
34-0842 Daily maximum fee (2nd) 1st - 6th rate zone basic rate: 0-999999= 0-999999 yen 0 1442
34-0843 1st rate zone basic rate 1st - 6th rate zone additional rate: 0-999999= 0-999999 yen 0 1443
34-0844 1st rate zone additional rate 0 1444
34-0845 2nd rate zone basic rate 0 1445
34-0846 2nd rate zone additional rate 0 1446
34-0847 3rd rate zone basic rate 0 1447
34-0848 3rd rate zone additional rate 0 1448
34-0849 4th rate zone basic rate 0 1449
34-0850 4th rate zone additional rate 0 1450
34-0851 5th rate zone basic rate 0 1451
34-0852 5th rate zone additional rate 0 1452
34-0853 6th rate zone basic rate 0 1453
34-0854 6th rate zone additional rate 0 1454
34-0855 0 1455
34-0856 0 1456
34-0857 0 1457
34-0858 0 1458
34-0859 0 1459
34-0860 K rate absolute maximum fee. 0 1460
34-0861 Daily maximum fee (1st) 0 1461
34-0862 Daily maximum fee (2nd) 0 1462
34-0863 1st rate zone basic rate 0 1463
34-0864 1st rate zone additional rate 0 1464
34-0865 2nd rate zone basic rate 0 1465
34-0866 2nd rate zone additional rate 0 1466
34-0867 3rd rate zone basic rate 0 1467
34-0868 3rd rate zone additional rate 0 1468
34-0869 4th rate zone basic rate 0 1469
34-0870 4th rate zone additional rate 0 1470
34-0871 5th rate zone basic rate 0 1471
34-0872 5th rate zone additional rate 0 1472
34-0873 6th rate zone basic rate 0 1473
34-0874 6th rate zone additional rate 0 1474
34-0875 0 1475
34-0876 0 1476
34-0877 0 1477
34-0878 0 1478
34-0879 0 1479
34-0880 L rate absolute maximum fee. 0 1480
34-0881 Daily maximum fee (1st) 0 1481
34-0882 Daily maximum fee (2nd) 0 1482
34-0883 1st rate zone basic rate 0 1483
34-0884 1st rate zone additional rate 0 1484
34-0885 2nd rate zone basic rate 0 1485
34-0886 2nd rate zone additional rate 0 1486
34-0887 3rd rate zone basic rate 0 1487
34-0888 3rd rate zone additional rate 0 1488
34-0889 4th rate zone basic rate 0 1489
34-0890 4th rate zone additional rate 0 1490
34-0891 5th rate zone basic rate 0 1491
34-0892 5th rate zone additional rate 0 1492
34-0893 6th rate zone basic rate 0 1493
34-0894 6th rate zone additional rate 0 1494
34-0895 0 1495
34-0896 0 1496
34-0897 0 1497
34-0898 0 1498
34-0899 0 1499

- 97 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-2-4. Day night Zone Pass Card 9-15 Start Time / End Time
Address Item Setting Range Default 77 79
34-0900 Pass card 9 start time (discount time) (Day night zone 1st rate system) 0
34-0901 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
34-0902 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
34-0903 Pass card 10 end time 0
34-0904 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
34-0905 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
34-0906 Pass card 12 start time (discount time) 0
34-0907 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
34-0909 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
34-0909 Pass card 13 end time 0
34-0910 Pass card 14 start time (discount time) 0
34-0911 Pass card 14 end time 0
34-0912 Pass card 15 start time (discount time) 0
34-0913 Pass card 15 end time 0
34-0914 0
34-0915 0
34-0916 0
34-0917 0
34-0918 0
34-0919 0
34-0920 Pass card 9 start time (discount time) (Day night zone 2nd rate system) 0
34-0921 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
34-0922 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
34-0923 Pass card 10 end time 0
34-0924 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
34-0925 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
34-0926 Pass card 12 start time (discount time) 0
34-0927 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
34-0928 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
34-0929 Pass card 13 end time 0
34-0930 Pass card 14 start time (discount time) 0
34-0931 Pass card 14 end time 0
34-0932 Pass card 15 start time (discount time) 0
34-0933 Pass card 15 end time 0
34-0934 0
34-0935 0
34-0936 0
34-0937 0
34-0938 0
34-0939 0
34-0940 Pass card 9 start time (discount time) (Day night zone 3rd rate system) 0
34-0941 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
34-0942 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
34-0943 Pass card 10 end time 0
34-0944 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
34-0945 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
34-0946 Pass card 12 start time (discount time) 0
34-0947 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
34-0948 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
34-0949 Pass card 13 end time 0
34-0950 Pass card 14 start time (discount time) 0
34-0951 Pass card 14 end time 0
34-0952 Pass card 15 start time (discount time) 0
34-0953 Pass card 15 end time 0
34-0954 0
34-0955 0
34-0956 0
34-0957 0
34-0958 0
34-0959 0

- 98 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-3. Regressive Zone Fee Calculation Setting


3-3-1. Regressive Zone 1st Rate System
Address Item Setting Range Default 77 79
35-0000 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 600
35-0001 Time discount valid end time 0 601
35-0002 1st rate system usage 0= No / I= Yes (regressive zone only) / 2= Yes (regressive zone and 1 602
midnight zone both)
35-0003 Regressive zone start time - Regressive zone / midnight zone start time: 0-2359= 0:00-23:59 0 603
35-0004 Regressive zone overlapping time - Regressive zone / midnight zone overlapping time: 0 604
35-0005 Midnight zone start time 1-959= 0:01-9:59 / 0= no overlapping 0 605
(A) (B)
35-0006 Midnight zone overlapping time 0 606
Midnight zone

Regressive Regressive
zone 1 2 zone
3 4
6
5

1-4 is regressive zone fee calculation.


5 is midnight zone fee calculation.
6 is combination. Between (A) and (B) is midnight zone, the other
period is regressive zone fee calculation.
35-0007 Repetition start pattern 1-11 0 607
35-0008 Repetition end pattern 0 608
35-0009 No. of repetition 1-99 / 0= Repeat infinitive. 0 609
35-0010 1st pattern unit time [Unit time] 30 610
35-0011 1st pattern unit factor 1-9959= 1-99 hour 59 min. 0 611
35-0012 2nd pattern unit time [Unit factor] 0 612
35-0013 2nd pattern unit factor 0= Repeat infinitive / 1-9999= 1-9999 times. 0 613
35-0014 3rd pattern unit time 0 614
35-0015 3rd pattern unit factor 0 615
35-0016 4th pattern unit time 0 616
35-0017 4th pattern unit factor 0 617
35-0018 5th pattern unit time 0 618
35-0019 5th pattern unit factor 0 619
35-0020 6th pattern unit time 0 620
35-0021 6th pattern unit factor 0 621
35-0022 7th pattern unit time 0 622
35-0023 7th pattern unit factor 0 623
35-0024 8th pattern unit time 0 624
35-0025 8th pattern unit factor 0 625
35-0026 9th pattern unit time 0 626
35-0027 9th pattern unit factor 0 627
35-0028 10th pattern unit time 0 628
35-0029 10th pattern unit factor 0 629
35-0030 11th pattern unit time 0 630
35-0031 11th pattern unit factor 0 631
35-0032 12th pattern unit time 0 632
35-0033 12th pattern unit factor 0 633
35-0034 0 634

35-0039 0 639
35-0040 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 640
35-0041 Pass card 1 end time 0-2359= 0:00-23:59 0 641
35-0042 Pass card 2 start time (discount time) 0 642
35-0043 Pass card 2 end time In case of start time = end time, normal pass card 0 643
35-0044 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 644
35-0045 Pass card 3 end time 0 645
35-0046 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 646
35-0047 Pass card 4 end time 0-959= 0:00-9:59 0 647
35-0048 Pass card 5 start time (discount time) 0 648
35-0049 Pass card 5 end time 0 649
35-0050 Pass card 6 start time (discount time) 0 650
35-0051 Pass card 6 end time 0 651
35-0052 Pass card 7 start time (discount time) 0 652
35-0053 Pass card 7 end time 0 653
35-0054 Pass card 8 start time (discount time) 0 654
35-0055 Pass card 8 end time 0 655
35-0056 0 656

35-0059 0 659

- 99 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 1st Rate System)


Address Item Setting Range Default 77 79
35-0060 A rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 999900 660
35-0061 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 661
35-0062 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 662
35-0063 1st pattern unit rate 100 663
35-0064 2nd pattern unit rate 0 664
35-0065 3rd pattern unit rate 0 665
35-0066 4th pattern unit rate 0 666
35-0067 5th pattern unit rate 0 667
35-0068 6th pattern unit rate 0 668
35-0069 7th pattern unit rate 0 669
35-0070 8th pattern unit rate 0 670
35-0071 9th pattern unit rate 0 671
35-0072 10th pattern unit rate 0 672
35-0073 11th pattern unit rate 0 673
35-0074 12th pattern unit rate 0 674
35-0075 0 675
35-0076 0 676
35-0077 0 677
35-0078 0 678
35-0079 0 679
35-0080 B rate absolute maximum fee. 0 680
35-0081 Daily maximum fee 0 681
35-0082 Midnight fee 0 682
35-0083 1st pattern unit rate 0 683
35-0084 2nd pattern unit rate 0 684
35-0085 3rd pattern unit rate 0 685
35-0086 4th pattern unit rate 0 686
35-0087 5th pattern unit rate 0 687
35-0088 6th pattern unit rate 0 688
35-0089 7th pattern unit rate 0 689
35-0090 8th pattern unit rate 0 690
35-0091 9th pattern unit rate 0 691
35-0092 10th pattern unit rate 0 692
35-0093 11th pattern unit rate 0 693
35-0094 12th pattern unit rate 0 694
35-0095 0 695
35-0096 0 696
35-0097 0 697
35-0098 0 698
35-0099 0 699
35-0100 C rate absolute maximum fee. 0 700
35-0101 Daily maximum fee 0 701
35-0102 Midnight fee 0 702
35-0103 1st pattern unit rate 0 703
35-0104 2nd pattern unit rate 0 704
35-0105 3rd pattern unit rate 0 705
35-0106 4th pattern unit rate 0 706
35-0107 5th pattern unit rate 0 707
35-0108 6th pattern unit rate 0 708
35-0109 7th pattern unit rate 0 709
35-0110 8th pattern unit rate 0 710
35-0111 9th pattern unit rate 0 711
35-0112 10th pattern unit rate 0 712
35-0113 11th pattern unit rate 0 713
35-0114 12th pattern unit rate 0 714
35-0115 0 715
35-0116 0 716
35-0117 0 717
35-0118 0 718
35-0119 0 719

- 100 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 1st Rate System)


Address Item Setting Range Default 77 79
35-0120 D rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 720
35-0121 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 721
35-0122 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 722
35-0123 1st pattern unit rate 0 723
35-0124 2nd pattern unit rate 0 724
35-0125 3rd pattern unit rate 0 725
35-0126 4th pattern unit rate 0 726
35-0127 5th pattern unit rate 0 727
35-0128 6th pattern unit rate 0 728
35-0129 7th pattern unit rate 0 729
35-0130 8th pattern unit rate 0 730
35-0131 9th pattern unit rate 0 731
35-0132 10th pattern unit rate 0 732
35-0133 11th pattern unit rate 0 733
35-0134 12th pattern unit rate 0 734
35-0135 0 735
35-0136 0 736
35-0137 0 737
35-0138 0 738
35-0139 0 739
35-0140 E rate absolute maximum fee. 0 740
35-0141 Daily maximum fee 0 741
35-0142 Midnight fee 0 742
35-0143 1st pattern unit rate 0 743
35-0144 2nd pattern unit rate 0 744
35-0145 3rd pattern unit rate 0 745
35-0146 4th pattern unit rate 0 746
35-0147 5th pattern unit rate 0 747
35-0148 6th pattern unit rate 0 748
35-0149 7th pattern unit rate 0 749
35-0150 8th pattern unit rate 0 750
35-0151 9th pattern unit rate 0 751
35-0152 10th pattern unit rate 0 752
35-0153 11th pattern unit rate 0 753
35-0154 12th pattern unit rate 0 754
35-0155 0 755
35-0156 0 756
35-0157 0 757
35-0158 0 758
35-0159 0 759
35-0160 F rate absolute maximum fee. 0 760
35-0161 Daily maximum fee 0 761
35-0162 Midnight fee 0 762
35-0163 1st pattern unit rate 0 763
35-0164 2nd pattern unit rate 0 764
35-0165 3rd pattern unit rate 0 765
35-0166 4th pattern unit rate 0 766
35-0167 5th pattern unit rate 0 767
35-0168 6th pattern unit rate 0 768
35-0169 7th pattern unit rate 0 769
35-0170 8th pattern unit rate 0 770
35-0171 9th pattern unit rate 0 771
35-0172 10th pattern unit rate 0 772
35-0173 11th pattern unit rate 0 773
35-0174 12th pattern unit rate 0 774
35-0175 0 775
35-0176 0 776
35-0177 0 777
35-0178 0 778
35-0179 0 779

- 101 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 1st Rate System)


Address Item Setting Range Default 79
35-0180 G rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 780
35-0181 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 781
35-0182 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 782
35-0183 1st pattern unit rate 0 783
35-0184 2nd pattern unit rate 0 784
35-0185 3rd pattern unit rate 0 785
35-0186 4th pattern unit rate 0 786
35-0187 5th pattern unit rate 0 787
35-0188 6th pattern unit rate 0 788
35-0189 7th pattern unit rate 0 789
35-0190 8th pattern unit rate 0 790
35-0191 9th pattern unit rate 0 791
35-0192 10th pattern unit rate 0 792
35-0193 11th pattern unit rate 0 793
35-0194 12th pattern unit rate 0 794
35-0195 0 795
35-0196 0 796
35-0197 0 797
35-0198 0 798
35-0199 0 799
35-0200 H rate absolute maximum fee. 0 800
35-0201 Daily maximum fee 0 801
35-0202 Midnight fee 0 802
35-0203 1st pattern unit rate 0 803
35-0204 2nd pattern unit rate 0 804
35-0205 3rd pattern unit rate 0 805
35-0206 4th pattern unit rate 0 806
35-0207 5th pattern unit rate 0 807
35-0208 6th pattern unit rate 0 808
35-0209 7th pattern unit rate 0 809
35-0210 8th pattern unit rate 0 810
35-0211 9th pattern unit rate 0 811
35-0212 10th pattern unit rate 0 812
35-0213 11th pattern unit rate 0 813
35-0214 12th pattern unit rate 0 814
35-0215 0 815
35-0216 0 816
35-0217 0 817
35-0218 0 818
35-0219 0 819
35-0220 I rate absolute maximum fee. 0 820
35-0221 Daily maximum fee 0 821
35-0222 Midnight fee 0 822
35-0223 1st pattern unit rate 0 823
35-0224 2nd pattern unit rate 0 824
35-0225 3rd pattern unit rate 0 825
35-0226 4th pattern unit rate 0 826
35-0227 5th pattern unit rate 0 827
35-0228 6th pattern unit rate 0 828
35-0229 7th pattern unit rate 0 829
35-0230 8th pattern unit rate 0 830
35-0231 9th pattern unit rate 0 831
35-0232 10th pattern unit rate 0 832
35-0233 11th pattern unit rate 0 833
35-0234 12th pattern unit rate 0 834
35-0235 0 835
35-0236 0 836
35-0237 0 837
35-0238 0 838
35-0239 0 839

- 102 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 1st Rate System)


Address Item Setting Range Default 77 79
35-0240 J rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 840
35-0241 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 841
35-0242 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 842
35-0243 1st pattern unit rate 0 843
35-0244 2nd pattern unit rate 0 844
35-0245 3rd pattern unit rate 0 845
35-0246 4th pattern unit rate 0 846
35-0247 5th pattern unit rate 0 847
35-0248 6th pattern unit rate 0 848
35-0249 7th pattern unit rate 0 849
35-0250 8th pattern unit rate 0 850
35-0251 9th pattern unit rate 0 851
35-0252 10th pattern unit rate 0 852
35-0253 11th pattern unit rate 0 853
35-0254 12th pattern unit rate 0 854
35-0255 0 855
35-0256 0 856
35-0257 0 857
35-0258 0 858
35-0259 0 859
35-0260 K rate absolute maximum fee. 0 860
35-0261 Daily maximum fee 0 861
35-0262 Midnight fee 0 862
35-0263 1st pattern unit rate 0 863
35-0264 2nd pattern unit rate 0 864
35-0265 3rd pattern unit rate 0 865
35-0266 4th pattern unit rate 0 866
35-0267 5th pattern unit rate 0 867
35-0268 6th pattern unit rate 0 868
35-0269 7th pattern unit rate 0 869
35-0270 8th pattern unit rate 0 870
35-0271 9th pattern unit rate 0 871
35-0272 10th pattern unit rate 0 872
35-0273 11th pattern unit rate 0 873
35-0274 12th pattern unit rate 0 874
35-0275 0 875
35-0276 0 876
35-0277 0 877
35-0278 0 878
35-0279 0 879
35-0280 L rate absolute maximum fee. 0 880
35-0281 Daily maximum fee 0 881
35-0282 Midnight fee 0 882
35-0283 1st pattern unit rate 0 883
35-0284 2nd pattern unit rate 0 884
35-0285 3rd pattern unit rate 0 885
35-0286 4th pattern unit rate 0 886
35-0287 5th pattern unit rate 0 887
35-0288 6th pattern unit rate 0 888
35-0289 7th pattern unit rate 0 889
35-0290 8th pattern unit rate 0 890
35-0291 9th pattern unit rate 0 891
35-0292 10th pattern unit rate 0 892
35-0293 11th pattern unit rate 0 893
35-0294 12th pattern unit rate 0 894
35-0295 0 895
35-0296 0 896
35-0297 0 897
35-0298 0 898
35-0299 0 899

- 103 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-3-2. Regressive zone 2nd rate system


Address Item Setting Range Default 77 79
35-0300 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 900
35-0301 Time discount valid end time 0 901
35-0302 2nd rate system usage 0= No / I= Yes (regressive zone only) / 2= Yes (regressive zone and 0 902
midnight zone both)
35-0303 Regressive zone start time - Regressive zone / midnight zone start time: 0-2359= 0:00-23:59 0 903
35-0304 Regressive zone overlapping time - Regressive zone / midnight zone overlapping time: 0 904
35-0305 Midnight zone start time 1-959= 0:01-9:59 / 0= no overlapping 0 905
(A) (B)
35-0306 Midnight zone overlapping time 0 906
Midnight zone

Regressive Regressive
zone 1 2 zone
3 4
6
5

1-4 is regressive zone fee calculation.


5 is midnight zone fee calculation.
6 is combination. Between (A) and (B) is midnight zone, the other
period is regressive zone fee calculation.
35-0307 Repetition start pattern 1-11 0 907
35-0308 Repetition end pattern 0 908
35-0309 No. of repetition 1-99 / 0= Repeat infinitive. 0 909
35-0310 1st pattern unit time [Unit time] 0 910
35-0311 1st pattern unit factor 1-9959= 1-99 hour 59 min. 0 911
35-0312 2nd pattern unit time [Unit factor] 0 912
35-0313 2nd pattern unit factor 0= Repeat infinitive / 1-9999= 1-9999 times. 0 913
35-0314 3rd pattern unit time 0 914
35-0315 3rd pattern unit factor 0 915
35-0316 4th pattern unit time 0 916
35-0317 4th pattern unit factor 0 917
35-0318 5th pattern unit time 0 918
35-0319 5th pattern unit factor 0 919
35-0320 6th pattern unit time 0 920
35-0321 6th pattern unit factor 0 921
35-0322 7th pattern unit time 0 922
35-0323 7th pattern unit factor 0 923
35-0324 8th pattern unit time 0 924
35-0325 8th pattern unit factor 0 925
35-0326 9th pattern unit time 0 926
35-0327 9th pattern unit factor 0 927
35-0328 10th pattern unit time 0 928
35-0329 10th pattern unit factor 0 929
35-0330 11th pattern unit time 0 930
35-0331 11th pattern unit factor 0 931
35-0332 12th pattern unit time 0 932
35-0333 12th pattern unit factor 0 933
35-0334 0 934

35-0339 0 939
35-0340 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 940
35-0341 Pass card 1 end time 0-2359= 0:00-23:59 0 941
35-0342 Pass card 2 start time (discount time) 0 942
35-0343 Pass card 2 end time In case of start time = end time, normal pass card 0 943
35-0344 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 944
35-0345 Pass card 3 end time 0 945
35-0346 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 946
35-0347 Pass card 4 end time 0-959= 0:00-9:59 0 947
35-0348 Pass card 5 start time (discount time) 0 948
35-0349 Pass card 5 end time 0 949
35-0350 Pass card 6 start time (discount time) 0 950
35-0351 Pass card 6 end time 0 951
35-0352 Pass card 7 start time (discount time) 0 952
35-0353 Pass card 7 end time 0 953
35-0354 Pass card 8 start time (discount time) 0 954
35-0355 Pass card 8 end time 0 955
35-0356 0 956

35-0359 0 959

- 104 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 2nd Rate System)


Address Item Setting Range Default 77 79
35-0360 A rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 960
35-0361 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 961
35-0362 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 962
35-0363 1st pattern unit rate 0 963
35-0364 2nd pattern unit rate 0 964
35-0365 3rd pattern unit rate 0 965
35-0366 4th pattern unit rate 0 966
35-0367 5th pattern unit rate 0 967
35-0368 6th pattern unit rate 0 968
35-0369 7th pattern unit rate 0 969
35-0370 8th pattern unit rate 0 970
35-0371 9th pattern unit rate 0 971
35-0372 10th pattern unit rate 0 972
35-0373 11th pattern unit rate 0 973
35-0374 12th pattern unit rate 0 974
35-0375 0 975
35-0376 0 976
35-0377 0 977
35-0378 0 978
35-0379 0 979
35-0380 B rate absolute maximum fee. 0 980
35-0381 Daily maximum fee 0 981
35-0382 Midnight fee 0 982
35-0383 1st pattern unit rate 0 983
35-0384 2nd pattern unit rate 0 984
35-0385 3rd pattern unit rate 0 985
35-0386 4th pattern unit rate 0 986
35-0387 5th pattern unit rate 0 987
35-0388 6th pattern unit rate 0 988
35-0389 7th pattern unit rate 0 989
35-0390 8th pattern unit rate 0 990
35-0391 9th pattern unit rate 0 991
35-0392 10th pattern unit rate 0 992
35-0393 11th pattern unit rate 0 993
35-0394 12th pattern unit rate 0 994
35-0395 0 995
35-0396 0 996
35-0397 0 997
35-0398 0 998
35-0399 0 999
35-0400 C rate absolute maximum fee. 0 1000
35-0401 Daily maximum fee 0 1001
35-0402 Midnight fee 0 1002
35-0403 1st pattern unit rate 0 1003
35-0404 2nd pattern unit rate 0 1004
35-0405 3rd pattern unit rate 0 1005
35-0406 4th pattern unit rate 0 1006
35-0407 5th pattern unit rate 0 1007
35-0408 6th pattern unit rate 0 1008
35-0409 7th pattern unit rate 0 1009
35-0410 8th pattern unit rate 0 1010
35-0411 9th pattern unit rate 0 1011
35-0412 10th pattern unit rate 0 1012
35-0413 11th pattern unit rate 0 1013
35-0414 12th pattern unit rate 0 1014
35-0415 0 1015
35-0416 0 1016
35-0417 0 1017
35-0418 0 1018
35-0419 0 1019

- 105 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 2nd Rate System)


Address Item Setting Range Default 77 79
35-0420 D rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1020
35-0421 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1021
35-0422 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1022
35-0423 1st pattern unit rate 0 1023
35-0424 2nd pattern unit rate 0 1024
35-0425 3rd pattern unit rate 0 1025
35-0426 4th pattern unit rate 0 1026
35-0427 5th pattern unit rate 0 1027
35-0428 6th pattern unit rate 0 1028
35-0429 7th pattern unit rate 0 1029
35-0430 8th pattern unit rate 0 1030
35-0431 9th pattern unit rate 0 1031
35-0432 10th pattern unit rate 0 1032
35-0433 11th pattern unit rate 0 1033
35-0434 12th pattern unit rate 0 1034
35-0435 0 1035
35-0436 0 1036
35-0437 0 1037
35-0438 0 1038
35-0439 0 1039
35-0440 E rate absolute maximum fee. 0 1040
35-0441 Daily maximum fee 0 1041
35-0442 Midnight fee 0 1042
35-0443 1st pattern unit rate 0 1043
35-0444 2nd pattern unit rate 0 1044
35-0445 3rd pattern unit rate 0 1045
35-0446 4th pattern unit rate 0 1046
35-0447 5th pattern unit rate 0 1047
35-0448 6th pattern unit rate 0 1048
35-0449 7th pattern unit rate 0 1049
35-0450 8th pattern unit rate 0 1050
35-0451 9th pattern unit rate 0 1051
35-0452 10th pattern unit rate 0 1052
35-0453 11th pattern unit rate 0 1053
35-0454 12th pattern unit rate 0 1054
35-0455 0 1055
35-0456 0 1056
35-0457 0 1057
35-0458 0 1058
35-0459 0 1059
35-0460 F rate absolute maximum fee. 0 1060
35-0461 Daily maximum fee 0 1061
35-0462 Midnight fee 0 1062
35-0463 1st pattern unit rate 0 1063
35-0464 2nd pattern unit rate 0 1064
35-0465 3rd pattern unit rate 0 1065
35-0466 4th pattern unit rate 0 1066
35-0467 5th pattern unit rate 0 1067
35-0468 6th pattern unit rate 0 1068
35-0469 7th pattern unit rate 0 1069
35-0470 8th pattern unit rate 0 1070
35-0471 9th pattern unit rate 0 1071
35-0472 10th pattern unit rate 0 1072
35-0473 11th pattern unit rate 0 1073
35-0474 12th pattern unit rate 0 1074
35-0475 0 1075
35-0476 0 1076
35-0477 0 1077
35-0478 0 1078
35-0479 0 1079

- 106 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 2nd Rate System)


Address Item Setting Range Default 77 79
35-0480 G rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1080
35-0481 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1081
35-0482 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1082
35-0483 1st pattern unit rate 0 1083
35-0484 2nd pattern unit rate 0 1084
35-0485 3rd pattern unit rate 0 1085
35-0486 4th pattern unit rate 0 1086
35-0487 5th pattern unit rate 0 1087
35-0488 6th pattern unit rate 0 1088
35-0489 7th pattern unit rate 0 1089
35-0490 8th pattern unit rate 0 1090
35-0491 9th pattern unit rate 0 1091
35-0492 10th pattern unit rate 0 1092
35-0493 11th pattern unit rate 0 1093
35-0494 12th pattern unit rate 0 1094
35-0495 0 1095
35-0496 0 1096
35-0497 0 1097
35-0498 0 1098
35-0499 0 1099
35-0500 H rate absolute maximum fee. 0 1100
35-0501 Daily maximum fee 0 1101
35-0502 Midnight fee 0 1102
35-0503 1st pattern unit rate 0 1103
35-0504 2nd pattern unit rate 0 1104
35-0505 3rd pattern unit rate 0 1105
35-0506 4th pattern unit rate 0 1106
35-0507 5th pattern unit rate 0 1107
35-0508 6th pattern unit rate 0 1108
35-0509 7th pattern unit rate 0 1109
35-0510 8th pattern unit rate 0 1110
35-0511 9th pattern unit rate 0 1111
35-0512 10th pattern unit rate 0 1112
35-0513 11th pattern unit rate 0 1113
35-0514 12th pattern unit rate 0 1114
35-0515 0 1115
35-0516 0 1116
35-0517 0 1117
35-0518 0 1118
35-0519 0 1119
35-0520 I rate absolute maximum fee. 0 1120
35-0521 Daily maximum fee 0 1121
35-0522 Midnight fee 0 1122
35-0523 1st pattern unit rate 0 1123
35-0524 2nd pattern unit rate 0 1124
35-0525 3rd pattern unit rate 0 1125
35-0526 4th pattern unit rate 0 1126
35-0527 5th pattern unit rate 0 1127
35-0528 6th pattern unit rate 0 1128
35-0529 7th pattern unit rate 0 1129
35-0530 8th pattern unit rate 0 1130
35-0531 9th pattern unit rate 0 1131
35-0532 10th pattern unit rate 0 1132
35-0533 11th pattern unit rate 0 1133
35-0534 12th pattern unit rate 0 1134
35-0535 0 1135
35-0536 0 1136
35-0537 0 1137
35-0538 0 1138
35-0539 0 1139

- 107 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 2nd Rate System)


Address Item Setting Range Default 77 79
35-0540 J rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1140
35-0541 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1141
35-0542 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1142
35-0543 1st pattern unit rate 0 1143
35-0544 2nd pattern unit rate 0 1144
35-0545 3rd pattern unit rate 0 1145
35-0546 4th pattern unit rate 0 1146
35-0547 5th pattern unit rate 0 1147
35-0548 6th pattern unit rate 0 1148
35-0549 7th pattern unit rate 0 1149
35-0550 8th pattern unit rate 0 1150
35-0551 9th pattern unit rate 0 1151
35-0552 10th pattern unit rate 0 1152
35-0553 11th pattern unit rate 0 1153
35-0554 12th pattern unit rate 0 1154
35-0555 0 1155
35-0556 0 1156
35-0557 0 1157
35-0558 0 1158
35-0559 0 1159
35-0560 K rate absolute maximum fee. 0 1160
35-0561 Daily maximum fee 0 1161
35-0562 Midnight fee 0 1162
35-0563 1st pattern unit rate 0 1163
35-0564 2nd pattern unit rate 0 1164
35-0565 3rd pattern unit rate 0 1165
35-0566 4th pattern unit rate 0 1166
35-0567 5th pattern unit rate 0 1167
35-0568 6th pattern unit rate 0 1168
35-0569 7th pattern unit rate 0 1169
35-0570 8th pattern unit rate 0 1170
35-0571 9th pattern unit rate 0 1171
35-0572 10th pattern unit rate 0 1172
35-0573 11th pattern unit rate 0 1173
35-0574 12th pattern unit rate 0 1174
35-0575 0 1175
35-0576 0 1176
35-0577 0 1177
35-0578 0 1178
35-0579 0 1179
35-0580 L rate absolute maximum fee. 0 1180
35-0581 Daily maximum fee 0 1181
35-0582 Midnight fee 0 1182
35-0583 1st pattern unit rate 0 1183
35-0584 2nd pattern unit rate 0 1184
35-0585 3rd pattern unit rate 0 1185
35-0586 4th pattern unit rate 0 1186
35-0587 5th pattern unit rate 0 1187
35-0588 6th pattern unit rate 0 1188
35-0589 7th pattern unit rate 0 1189
35-0590 8th pattern unit rate 0 1190
35-0591 9th pattern unit rate 0 1191
35-0592 10th pattern unit rate 0 1192
35-0593 11th pattern unit rate 0 1193
35-0594 12th pattern unit rate 0 1194
35-0595 0 1195
35-0596 0 1196
35-0597 0 1197
35-0598 0 1198
35-0599 0 1199

- 108 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-3-3. Regressive Zone 3rd Rate System


Address Item Setting Range Default 77 79
35-0600 Time discount valid start time 0-2359= 0:00-23:59 (valid for discount time for each rate) 0 1200
35-0601 Time discount valid end time 0 1201
35-0602 3rd rate system usage 0= No / I= Yes (regressive zone only) / 2= Yes (regressive zone and 0 1202
midnight zone both)
35-0603 Regressive zone start time - Regressive zone / midnight zone start time: 0-2359= 0:00-23:59 0 1203
35-0604 Regressive zone overlapping time - Regressive zone / midnight zone overlapping time: 0 1204
35-0605 Midnight zone start time 1-959= 0:01-9:59 / 0= no overlapping 0 1205
(A) (B)
35-0606 Midnight zone overlapping time 0 1206
Midnight zone

Regressive Regressive
zone 1 2 zone
3 4
6
5

1-4 is regressive zone fee calculation.


5 is midnight zone fee calculation.
6 is combination. Between (A) and (B) is midnight zone, the other
period is regressive zone fee calculation.
35-0607 Repetition start pattern 1-11 0 1207
35-0608 Repetition end pattern 0 1208
35-0609 No. of repetition 1-99 / 0= Repeat infinitive. 0 1209
35-0610 1st pattern unit time [Unit time] 0 1210
35-0611 1st pattern unit factor 1-9959= 1-99 hour 59 min. 0 1211
35-0612 2nd pattern unit time [Unit factor] 0 1212
35-0613 2nd pattern unit factor 0= Repeat infinitive / 1-9999= 1-9999 times. 0 1213
35-0614 3rd pattern unit time 0 1214
35-0615 3rd pattern unit factor 0 1215
35-0616 4th pattern unit time 0 1216
35-0617 4th pattern unit factor 0 1217
35-0618 5th pattern unit time 0 1218
35-0619 5th pattern unit factor 0 1219
35-0620 6th pattern unit time 0 1220
35-0621 6th pattern unit factor 0 1221
35-0622 7th pattern unit time 0 1222
35-0623 7th pattern unit factor 0 1223
35-0624 8th pattern unit time 0 1224
35-0625 8th pattern unit factor 0 1225
35-0626 9th pattern unit time 0 1226
35-0627 9th pattern unit factor 0 1227
35-0628 10th pattern unit time 0 1228
35-0629 10th pattern unit factor 0 1229
35-0630 11th pattern unit time 0 1230
35-0631 11th pattern unit factor 0 1231
35-0632 12th pattern unit time 0 1232
35-0633 12th pattern unit factor 0 1233
35-0634 0 1234

35-0639 0 1239
35-0640 Pass card 1start time (discount time) In case of the time zone pass card, set the start / end time 0 1240
35-0641 Pass card 1 end time 0-2359= 0:00-23:59 0 1241
35-0642 Pass card 2 start time (discount time) 0 1242
35-0643 Pass card 2 end time In case of start time = end time, normal pass card 0 1243
35-0644 Pass card 3 start time (discount time) End time is handled as the day change time for valid or invalid day. 0 1244
35-0645 Pass card 3 end time 0 1245
35-0646 Pass card 4 start time (discount time) In case of the time discount pass card, set the discount time. 0 1246
35-0647 Pass card 4 end time 0-959= 0:00-9:59 0 1247
35-0648 Pass card 5 start time (discount time) 0 1248
35-0649 Pass card 5 end time 0 1249
35-0650 Pass card 6 start time (discount time) 0 1250
35-0651 Pass card 6 end time 0 1251
35-0652 Pass card 7 start time (discount time) 0 1252
35-0653 Pass card 7 end time 0 1253
35-0654 Pass card 8 start time (discount time) 0 1254
35-0655 Pass card 8 end time 0 1255
35-0656 0 1256

35-0659 0 1259

- 109 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 3rd Rate System)


Address Item Setting Range Default 77 79
35-0660 A rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1260
35-0661 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1261
35-0662 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1262
35-0663 1st pattern unit rate 0 1263
35-0664 2nd pattern unit rate 0 1264
35-0665 3rd pattern unit rate 0 1265
35-0666 4th pattern unit rate 0 1266
35-0667 5th pattern unit rate 0 1267
35-0668 6th pattern unit rate 0 1268
35-0669 7th pattern unit rate 0 1269
35-0670 8th pattern unit rate 0 1270
35-0671 9th pattern unit rate 0 1271
35-0672 10th pattern unit rate 0 1272
35-0673 11th pattern unit rate 0 1273
35-0674 12th pattern unit rate 0 1274
35-0675 0 1275
35-0676 0 1276
35-0677 0 1277
35-0678 0 1278
35-0679 0 1279
35-0680 B rate absolute maximum fee. 0 1280
35-0681 Daily maximum fee 0 1281
35-0682 Midnight fee 0 1282
35-0683 1st pattern unit rate 0 1283
35-0684 2nd pattern unit rate 0 1284
35-0685 3rd pattern unit rate 0 1285
35-0686 4th pattern unit rate 0 1286
35-0687 5th pattern unit rate 0 1287
35-0688 6th pattern unit rate 0 1288
35-0689 7th pattern unit rate 0 1289
35-0690 8th pattern unit rate 0 1290
35-0691 9th pattern unit rate 0 1291
35-0692 10th pattern unit rate 0 1292
35-0693 11th pattern unit rate 0 1293
35-0694 12th pattern unit rate 0 1294
35-0695 0 1295
35-0696 0 1296
35-0697 0 1297
35-0698 0 1298
35-0699 0 1299
35-0700 C rate absolute maximum fee. 0 1300
35-0701 Daily maximum fee 0 1301
35-0702 Midnight fee 0 1302
35-0703 1st pattern unit rate 0 1303
35-0704 2nd pattern unit rate 0 1304
35-0705 3rd pattern unit rate 0 1305
35-0706 4th pattern unit rate 0 1306
35-0707 5th pattern unit rate 0 1307
35-0708 6th pattern unit rate 0 1308
35-0709 7th pattern unit rate 0 1309
35-0710 8th pattern unit rate 0 1310
35-0711 9th pattern unit rate 0 1311
35-0712 10th pattern unit rate 0 1312
35-0713 11th pattern unit rate 0 1313
35-0714 12th pattern unit rate 0 1314
35-0715 0 1315
35-0716 0 1316
35-0717 0 1317
35-0718 0 1318
35-0719 0 1319

- 110 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 3rd Rate System)


Address Item Setting Range Default 77 79
35-0720 D rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1320
35-0721 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1321
35-0722 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1322
35-0723 1st pattern unit rate 0 1323
35-0724 2nd pattern unit rate 0 1324
35-0725 3rd pattern unit rate 0 1325
35-0726 4th pattern unit rate 0 1326
35-0727 5th pattern unit rate 0 1327
35-0728 6th pattern unit rate 0 1328
35-0729 7th pattern unit rate 0 1329
35-0730 8th pattern unit rate 0 1330
35-0731 9th pattern unit rate 0 1331
35-0732 10th pattern unit rate 0 1332
35-0733 11th pattern unit rate 0 1333
35-0734 12th pattern unit rate 0 1334
35-0735 0 1335
35-0736 0 1336
35-0737 0 1337
35-0738 0 1338
35-0739 0 1339
35-0740 E rate absolute maximum fee. 0 1340
35-0741 Daily maximum fee 0 1341
35-0742 Midnight fee 0 1342
35-0743 1st pattern unit rate 0 1343
35-0744 2nd pattern unit rate 0 1344
35-0745 3rd pattern unit rate 0 1345
35-0746 4th pattern unit rate 0 1346
35-0747 5th pattern unit rate 0 1347
35-0748 6th pattern unit rate 0 1348
35-0749 7th pattern unit rate 0 1349
35-0750 8th pattern unit rate 0 1350
35-0751 9th pattern unit rate 0 1351
35-0752 10th pattern unit rate 0 1352
35-0753 11th pattern unit rate 0 1353
35-0754 12th pattern unit rate 0 1354
35-0755 0 1355
35-0756 0 1356
35-0757 0 1357
35-0758 0 1358
35-0759 0 1359
35-0760 F rate absolute maximum fee. 0 1360
35-0761 Daily maximum fee 0 1361
35-0762 Midnight fee 0 1362
35-0763 1st pattern unit rate 0 1363
35-0764 2nd pattern unit rate 0 1364
35-0765 3rd pattern unit rate 0 1365
35-0766 4th pattern unit rate 0 1366
35-0767 5th pattern unit rate 0 1367
35-0768 6th pattern unit rate 0 1368
35-0769 7th pattern unit rate 0 1369
35-0770 8th pattern unit rate 0 1370
35-0771 9th pattern unit rate 0 1371
35-0772 10th pattern unit rate 0 1372
35-0773 11th pattern unit rate 0 1373
35-0774 12th pattern unit rate 0 1374
35-0775 0 1375
35-0776 0 1376
35-0777 0 1377
35-0778 0 1378
35-0779 0 1379

- 111 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 3rd Rate System)


Address Item Setting Range Default 77 79
35-0780 G rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1380
35-0781 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1381
35-0782 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1382
35-0783 1st pattern unit rate 0 1383
35-0784 2nd pattern unit rate 0 1384
35-0785 3rd pattern unit rate 0 1385
35-0786 4th pattern unit rate 0 1386
35-0787 5th pattern unit rate 0 1387
35-0788 6th pattern unit rate 0 1388
35-0789 7th pattern unit rate 0 1389
35-0790 8th pattern unit rate 0 1390
35-0791 9th pattern unit rate 0 1391
35-0792 10th pattern unit rate 0 1392
35-0793 11th pattern unit rate 0 1393
35-0794 12th pattern unit rate 0 1394
35-0795 0 1395
35-0796 0 1396
35-0797 0 1397
35-0798 0 1398
35-0799 0 1399
35-0800 H rate absolute maximum fee. 0 1400
35-0801 Daily maximum fee 0 1401
35-0802 Midnight fee 0 1402
35-0803 1st pattern unit rate 0 1403
35-0804 2nd pattern unit rate 0 1404
35-0805 3rd pattern unit rate 0 1405
35-0806 4th pattern unit rate 0 1406
35-0807 5th pattern unit rate 0 1407
35-0808 6th pattern unit rate 0 1408
35-0809 7th pattern unit rate 0 1409
35-0810 8th pattern unit rate 0 1410
35-0811 9th pattern unit rate 0 1411
35-0812 10th pattern unit rate 0 1412
35-0813 11th pattern unit rate 0 1413
35-0814 12th pattern unit rate 0 1414
35-0815 0 1415
35-0816 0 1416
35-0817 0 1417
35-0818 0 1418
35-0819 0 1419
35-0820 I rate absolute maximum fee. 0 1420
35-0821 Daily maximum fee 0 1421
35-0822 Midnight fee 0 1422
35-0823 1st pattern unit rate 0 1423
35-0824 2nd pattern unit rate 0 1424
35-0825 3rd pattern unit rate 0 1425
35-0826 4th pattern unit rate 0 1426
35-0827 5th pattern unit rate 0 1427
35-0828 6th pattern unit rate 0 1428
35-0829 7th pattern unit rate 0 1429
35-0830 8th pattern unit rate 0 1430
35-0831 9th pattern unit rate 0 1431
35-0832 10th pattern unit rate 0 1432
35-0833 11th pattern unit rate 0 1433
35-0834 12th pattern unit rate 0 1434
35-0835 0 1435
35-0836 0 1436
35-0837 0 1437
35-0838 0 1438
35-0839 0 1439

- 112 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive Zone 3rd Rate System)


Address Item Setting Range Default 77 79
35-0840 J rate absolute maximum fee. Absolute maximum fee : 0-999999= 0-999999 yen. 0 1440
35-0841 Daily maximum fee Daily maximum fee : 0-999999= 0-999999 yen 0 1441
35-0842 Midnight fee Midnight fee and each pattern unit rate : 0-999999= 0-999999 yen 0 1442
35-0843 1st pattern unit rate 0 1443
35-0844 2nd pattern unit rate 0 1444
35-0845 3rd pattern unit rate 0 1445
35-0846 4th pattern unit rate 0 1446
35-0847 5th pattern unit rate 0 1447
35-0848 6th pattern unit rate 0 1448
35-0849 7th pattern unit rate 0 1449
35-0850 8th pattern unit rate 0 1450
35-0851 9th pattern unit rate 0 1451
35-0852 10th pattern unit rate 0 1452
35-0853 11th pattern unit rate 0 1453
35-0854 12th pattern unit rate 0 1454
35-0855 0 1455
35-0856 0 1456
35-0857 0 1457
35-0858 0 1458
35-0859 0 1459
35-0860 K rate absolute maximum fee. 0 1460
35-0861 Daily maximum fee 0 1461
35-0862 Midnight fee 0 1462
35-0863 1st pattern unit rate 0 1463
35-0864 2nd pattern unit rate 0 1464
35-0865 3rd pattern unit rate 0 1465
35-0866 4th pattern unit rate 0 1466
35-0867 5th pattern unit rate 0 1467
35-0868 6th pattern unit rate 0 1468
35-0869 7th pattern unit rate 0 1469
35-0870 8th pattern unit rate 0 1470
35-0871 9th pattern unit rate 0 1471
35-0872 10th pattern unit rate 0 1472
35-0873 11th pattern unit rate 0 1473
35-0874 12th pattern unit rate 0 1474
35-0875 0 1475
35-0876 0 1476
35-0877 0 1477
35-0878 0 1478
35-0879 0 1479
35-0880 L rate absolute maximum fee. 0 1480
35-0881 Daily maximum fee 0 1481
35-0882 Midnight fee 0 1482
35-0883 1st pattern unit rate 0 1483
35-0884 2nd pattern unit rate 0 1484
35-0885 3rd pattern unit rate 0 1485
35-0886 4th pattern unit rate 0 1486
35-0887 5th pattern unit rate 0 1487
35-0888 6th pattern unit rate 0 1488
35-0889 7th pattern unit rate 0 1489
35-0890 8th pattern unit rate 0 1490
35-0891 9th pattern unit rate 0 1491
35-0892 10th pattern unit rate 0 1492
35-0893 11th pattern unit rate 0 1493
35-0894 12th pattern unit rate 0 1494
35-0895 0 1495
35-0896 0 1496
35-0897 0 1497
35-0898 0 1498
35-0899 0 1499

- 113 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

3-3-4. Regressive Zone Pass Card 9-15 Start Time / End Time
Address Item Setting Range Default 77 79
35-0900 Pass card 9 start time (discount time) (Regressive zone 1st rate system) 0
35-0901 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
35-0902 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
35-0903 Pass card 10 end time 0
35-0904 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
35-0905 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
35-0906 Pass card 12 start time (discount time) 0
35-0907 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
35-0909 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
35-0909 Pass card 13 end time 0
35-0910 Pass card 14 start time (discount time) 0
35-0911 Pass card 14 end time 0
35-0912 Pass card 15 start time (discount time) 0
35-0913 Pass card 15 end time 0
35-0914 0
35-0915 0
35-0916 0
35-0917 0
35-0918 0
35-0919 0
35-0920 Pass card 9 start time (discount time) (Regressive zone 2nd rate system) 0
35-0921 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
35-0922 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
35-0923 Pass card 10 end time 0
35-0924 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
35-0925 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
35-0926 Pass card 12 start time (discount time) 0
35-0927 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
35-0928 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
35-0929 Pass card 13 end time 0
35-0930 Pass card 14 start time (discount time) 0
35-0931 Pass card 14 end time 0
35-0932 Pass card 15 start time (discount time) 0
35-0933 Pass card 15 end time 0
35-0934 0
35-0935 0
35-0936 0
35-0937 0
35-0938 0
35-0939 0
35-0940 Pass card 9 start time (discount time) (Regressive zone 3rd rate system) 0
35-0941 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
35-0942 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
35-0943 Pass card 10 end time 0
35-0944 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
35-0945 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
35-0946 Pass card 12 start time (discount time) 0
35-0947 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
35-0948 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
35-0949 Pass card 13 end time 0
35-0950 Pass card 14 start time (discount time) 0
35-0951 Pass card 14 end time 0
35-0952 Pass card 15 start time (discount time) 0
35-0953 Pass card 15 end time 0
35-0954 0
35-0955 0
35-0956 0
35-0957 0
35-0958 0
35-0959 0

- 114 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4. Other Extended Function Setting


4-1. Denomination Setting (2)
Address Item Setting Range AE AKC Default 77 79
37-0001 The read coin 7 denomination (go to coin 0
safe directly) 1-999999= 1-999999 yen
37-0002 The read coin 8 denomination (go to coin 0
safe directly)
37-0003 The read coin 7 denomination coin point 0-99= 0-99 point 23 22 25
37-0004 The read coin 8 denomination coin point (Refer coin point table) 23 22 25
37-0005 The read note 5 denomination 0
1-999999= 1-999999 yen
37-0006 The read note 6 denomination 0
37-0007 The read note 7 denomination 0
37-0008 The read note 8 denomination 0
37-0009 Currency setting (2nd) See currency table in 4-6. 0
37-0010 1st currency exchange rate 100 fixed 100
ex.) 41-0002=21000  100=$1.00
37-0011 2nd currency exchange rate 1-999999= 1-999999 yen 100
ex.) 37-0009=21000  100=$1.00
37-0012 The read coin 1 currency 0= 1st currency / 1= 2nd currency 0
37-0013 The read coin 2 currency 0
37-0014 The read coin 3 currency (Note) 0
37-0015 The read coin 4 currency 2nd currency coin has to go to the coin safe directly. 0
37-0016 The read coin 5 currency Hopper currency has to be 1st currency. 0
37-0017 The read coin 6 currency 0
37-0018 The read coin 7 currency 0
37-0019 The read coin 8 currency 0
37-0020 The read note 1 currency 0= 1st currency / 1= 2nd currency 0
37-0021 The read note 2 currency 0
37-0022 The read note 3 currency 0
37-0023 The read note 4 currency 0
37-0024 The read note 5 currency 0
37-0025 The read note 6 currency 0
37-0026 The read note 7 currency 0
37-0027 The read note 8 currency 0
37-0028 Amount of rounding off changes From 0: Rounding off less than the value (recommended to set the 0
minimum hopper denomination)
37-0029 Handling the inserted amount with 2nd 0= Issue claim check / 1= Return with 1st currency coins / 0
currency in case of the cancelled payment 2= Return with 1st currency coins and notes.
37-0030 The maximum refund amount for 1st 0= Unlimited / 1-999999= 1-999999 yen 0
currency coins for inserted 2nd currency in
case of the cancelled payment
37-0031

37-0100

- 115 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-2. Credit Card Setting


Address Item Setting Range Default 77 79
38-0001 Credit card payment 0= No / 1= Yes 0
38-0002 Credit card max. payable amount 1-999999 (1-999999 yen) 30000
0= Not Checked (Not applicable when surcharge fee is added for
credit card payment)
38-0003 Credit card payment automatic receipt 0= No / 1= Yes 1
issuing
38-0004 Credit card payment mark printing on the 0= No / 1= Yes 0
parking ticket
38-0005 Data receiving timer (TEXT) 01-99 : 1-99 s (unit : 1s) 20
38-0006 Unused 0
38-0007 Unused 0
38-0008 Unused 0
38-0009 Card number printing on the receipt 0= Print all digits 1
1= Print first 4 digits only, the other digits will be “*” printed.
2= Print last 4 digits only, the other digits will be “*” printed.
3= Prin atll “*”.
38-0010 Card usage with cash 0= No / 1= Yes for ticket payment only / 2= Yes for all 0
payment (including pass card renewal)
Note:
ASPECT cannot support cash and credit card combined payment.
38-0011 Credit card server port number 00000-32767 0
38-0012 Credit card server IP address (1) 000-255 0
38-0013 Credit card server IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
38-0014 Credit card server IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
38-0015 Credit card server IP address (4) 0
38-0016 Number of connection retry 01-99 : 1-98 times, 99= infinitive 0
38-0017 Connection timer 01-99 : 1-99s (unit : 1s) 2
38-0018 Number of packet sending retry 01-99 : 1-98 times, 99= infinitive 0
38-0019 Packet watch timer 01-99 : 1-99s (unit : 1s) 15
38-0020 Receiving result watch timer (ARCNET) 01-99 : 1-99s (unit : 1s) 5
38-0021 Ethernet initial setting 0= Yes / 1= No 0
38-0022 DHCP usage 0= No / 1= Yes 0
38-0023 Own port number 0-32767 0
38-0024 Own IP address (1) 000-255 0
38-0025 Own IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
38-0026 Own IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
38-0027 Own IP address (4) 0
38-0028 Subnet mask Number of host address bit 0-24 0
Ex.) class C (255.255.255.0)=08
class B (255.255.0.0)=16
class A (255.0.0.0)=24
38-0029 Default gateway IP address (1) 000-255 0
38-0030 Default gateway IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
38-0031 Default gateway IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
38-0032 Default gateway IP address (4) 0
38-0033 Unused 0
38-0034 Unused
38-0035 Unused
38-0036 Unused
38-0037 Unused
38-0038 Unused
38-0039 Unused
38-0040 Credit Card payment for pass card 0= No 0
renewal 1= Credit card pre-read system
2= Pass card insert twice
38-0041 Credit Card In/Out 0= No / 1= Yes 0
38-0042 Credit Card In/Out Payment button 0= Not displayed / 1= Displayed 1
38-0043 Online discount with credit card 0= No / 1= Yes 0
(This parameter is not for credit card In/Out, only for online
discount with credit card.)
38-0044 Scramble credit card information [1st digit] 0
0= No / 1= Credit card communication data / 2= Credit card numbers
[2nd disit]
0= Use INI file key / 1= use key created by dll
38-0045 Unused

38-0100 Unused 0

- 116 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-3. Mifare Setting


Address Item Setting Range Default
39-0001 Mifare Card R/W terminal connection 0=No / 1=Yes 0
39-0002 0
39-0003 Baud rate between R/W unit 0=38400bps / 1=19200bps / 2=9600bps / 3=4800bps 0
39-0004 Waiting for a response 1 10 - 9990=10 - 9990ms 50
(from command sending to ACK receiving)
39-0005 Waiting for a response 2 10 - 9990=10 - 9990ms 100
(from command sending to telegraph
receiving)
39-0006 Waiting for a response 3 10 - 9990=10 - 9990ms 100
(Telegraph receiving monitoring timer)
39-0007 No. of retry 0 - 9=0 - 9 times 2
39-0008 Time interval of R/W connection confirming 1 - 999=1 - 999 sec 5
polling
39-0009 Card Sensing Interval 10 - 9990=10 - 9990ms 200
39-0010 Time of waiting for a response from main 0 - 99=0 - 99 sec 20
module.
39-0011 Backup memory clear 5Ah=Clear the backup memory of ICC 0
5Ah≠No Operation
39-0012 Access key 1 (First 2 byte) 0-65535 0
39-0013 Access key 1 (Midle 2 byte) 0-65535 0
39-0014 Access key 1 (Last 2 byte) 0-65535 0
39-0015 Access key 2 (First 2 byte) 0-65535 0
39-0016 Access key 2 (Midle 2 byte) 0-65535 0
39-0017 Access key 2 (Last 2 byte) 0-65535 0
39-0018 Access key 3 (First 2 byte) 0-65535 0
39-0019 Access key 3 (Midle 2 byte) 0-65535 0
39-0020 Access key 3 (Last 2 byte) 0-65535 0
39-0021 Access key 4 (First 2 byte) 0-65535 0
39-0022 Access key 4 (Midle 2 byte) 0-65535 0
39-0023 Access key 4 (Last 2 byte) 0-65535 0
39-0024 0
39-0025 Reading sector 1 1-16= Sector 1-16 / 0= None specified 0
39-0026 Reading sector 2 1-16= Sector 1-16 / 0= None specified 0
39-0027 Reading sector 3 1-16= Sector 1-16 / 0= None specified 0
39-0028 Reading sector 4 1-16= Sector 1-16 / 0= None specified 0
39-0029 0
39-0030 Access key mode 1 1-8,10,11 1
39-0031 Access key mode 2 1-4:Use Access key 1-4 as A key 1
39-0032 Access key mode 3 5-8:Use Access key 1-4 as B key 0
39-0033 Access key mode 4 10:Use A key registered to R/W 0
11:Use B key registered to R/W
Other than those above: Use Access key 1 as A key
39-0034
39-0035 Access block of reading sector 1 0-7 Each bit has meanings and specifies the data to read. 7
39-0036 Access block of reading sector 2 b0: Block 1 reading 1=Yes / 0=No 7
39-0037 Access block of reading sector 3 b1: Block 2 reading 1=Yes / 0=No 0
39-0038 Access block of reading sector 4 b2: Block 3 reading 1=Yes / 0=No 0
b3-7: Not Used

e.g. 7= 0000 0111 (b0/b1/b2= 1)


39-0039 0
39-0040 Mifare Card format 0=AMANO Standard type / 1= Card ID Type 0
39-0041 Card ID position 1-192 0
39-0042 Card ID size 1-24 0
39-0043 Card ID In/Out 0= No / 1= Yes 0
39-0044 Card ID discount usage 0= No / 1= Yes 0
39-0045 Reserved 0

39-0049 Reserved 0
39-0050 Card retrieve confirm 0=No 0
1=Payment complete (or cancel) after the confirmation is done
39-0051 MIFARE Card used as AMANO Card or 0= AMANO Card (non-Online Operation) / 1= Serial ID (Online 2
Serial ID (Online) Operation) / 2= Either
39-0052 Mifare Card Serial ID 0= HEX (ASCII 8 digit) / 1= DEC (ASCII 10 digit) 0
39-0053 Reserved 0

39-0100 Reserved 0

- 117 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-4. NT7900 Specific Parameter


Address Item Setting Range AE AKC Default 77 79
(ATAS)
41-0001 Date format setting <1st digit> Time format 100 add 460
0: 24 hour format
1: 12 hour format (time + AM/PM)
<3rd digit> Date format
0:YYYY/MM/DD, YY/MM/DD, MM/DD
1:DD/MM/YYYY, DD/MM/YY, DD/MM
2:MM/DD/YYYY, MM/DD/YY, MM/DD
(If year is mentioned 2digits, last 2digits will be shown. If no year,
only month and date will be shown.)
41-0002 Currency setting See currency table in 4-6. 21001 4 20103 add
41-0003 Fee announcement logic 1st digit : Primary language logic 661 25 11 add
2nd digit : 2nd language logic
3rd digit : 3rd language logic
0= no fee announcement / 1-9= logic no.1-9

See 4-9.
41-0004 Primary language 0= No language / 1= English / 2= French / 12 7 1 add
41-0005 2nd language 3= German / 4= Dutch / 5= Italian (NA) / 2 1 9 add
41-0006 3rd language 6= Spanish / 7= Korean / 8= Chinese (Simplified) / 4 0 0 add
9= Malay / 10= Japanese /
11= Chinese (Traditional) / 12= British English /
13= Spanish (Venezuela) / 14= Catalan /
15= Galicia / 16= Bask / 17= Welsh / 18= Estonia /
19= Bulgar / 20= Romanian / 21= Finnish /
22= Greece / 23= Swedish / 24= Spanish (Chile)
41-0007 Operator and Administrator operation lan 0=English / 1=First Language 0 0 0
guage
41-0008 Error, Warning language 0 0 0
41-0009 Communication data rate change 0= amount data is sent as it is. 0 1 0 add
1= amount data is sent with 1/10 calculation.
2= amount data is sent with 1/100 calculation.
41-0010 Magnetic reader type 0= 1direction reader (ignore the abnormality of the magnetic head 0
home position sensor)
1= Not used
2= Credit card reading (ISO2 card, option)
999= No magnetic reader
41-0011 Journal printer type 0= soft journal (compact flash) / 1= journal printer 1
41-0012 Banknote reader type 0= Money control / 1= Sodeco / 4= CashCode (4 notes) / 0
5= CashCode (8 notes) / 999= No BNA
21-100= Sodeco (with escrow function)
21 Argentina 22 Australia 23 Austria
24 Belgium 25 Brazil 26 Canada
27 Channel Islands - UK 28 China
29 Croatia
30 Cyprus 31 Czech Republic 32 Denmark
33 England 34 Finland 35 France
36 Germany 37 Greece 38 Hong Kong
39 Hungary 40 Iceland 41 Ireland
42 Israel 43 Italy 44 Japan
45 Korea (South) 46 Kuwait 47 Luxemburg
48 Malaysia 49 Mexico
50 The Netherlands
51 New Zealand 52 Norway 53 Oman
54 Poland 55 Portugal 56 Russia
57 Saudi Arabia 58 (Socland) 59 Singapore
60 Slovak Republic 61 South Africa 62 Spain
63 Sweden 64 Switzerland 65 Taiwan
66 Turkey 67 United Arab Emirates
68 USA 69 Venezuela 70 EURO
|100 Channel Islands - UK (27) + England (33)
41-0013 Banknote dispenser type 0= Puloon (LCDM) / 1= Puloon (ECDM) 0
41-0014 Banknote type for banknote1/banknote5 1st and 2nd digit: banknote1-4 1 1 1 add
41-0015 Banknote type for banknote2/banknote6 3rd and 4th digit: banknote5-8 2 2 2 add
41-0016 Banknote type for banknote3/banknote7 0= Not used / 1-22= banknote type 3 3 3 add
41-0017 Banknote type for banknote4/banknote8 (See 4-8) 4 0 4 add

- 118 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AE AKC Default 77 79


(ATAS)
41-0018 Gate action in case the LC2 is ON when 0= Gate will be opened immediately 0
the payment is finished 1= Gate will be opened after LC2 become OFF
41-0019 Back out ticket watch timer after the 0= Not watch 0
payment is finished 1-60= Gate will be closed after 1-60 seconds
41-0020 Type of slave terminal 1 0= No terminal 0
41-0021 Type of slave terminal 2 1= Entry equipment (Ticket dispenser, pass card reader, and so on) 0
41-0022 Type of slave terminal 3 2= Exit equipment (Exit fee computer, lagtime reader, and so on) 0
41-0023 Type of slave terminal 4 3= Central paystation 0
41-0024 Type of slave terminal 5 0
41-0025 Type of slave terminal 6 0
41-0026 Type of slave terminal 7 0
41-0027 Coin reader type 0= Follow the coin reading setting (=4 coin reading; parallel, 8 coin 0
reading; binary)
1= Parallel
2= Binary
999= No Coin reader
41-0028 Number of coins for consecutive 0-15 (0=15coins) 0
dispensing

- 119 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


41-0029 TOTAL report sequential number 0= Not reset 0
resetting 1= Reset to 1 by GT(MT) total issuing
41-0030 Payment number 0= 5digits 1
1= 6 digits (payment number in communication data is in hexadecimal)
41-0031 Payment number assignment 0= Common usage on normal payment and cancelled payment 2
1= Separate number on normal payment and cancelled payment
2= Common usage, but the number is not updated in case of
cancelled payment
41-0032 Re-payment fee calculation 0: Calculate from previous paid time / 1: Calculate from entry time 0
41-0033 Paystation type <1st digit> 0
0=Automatically recognized for the shutter and coin change conveyer
depending on the loop configuration setting (specific parameter
01-0005).
1= Follow the setting of <2nd digit> and <3rd digit>
<2nd digit> Banknote reader shutter 0= No / 1= Yes
<3rd digit> Coin change conveyer 0= No / 1= Yes
41-0034 Daily reboot (not available) 0= No 0
41-0035 Communication module 0= No communication module / 1= with communication module 1
41-0036 DST start date 0= No DST / month(1-12) x 100 + week(1-5) x 10 + day 357 0 0
(1-7:Mon-Sun)
41-0037 DST start time 0-2359= 0:00-23:59 200 0 0
41-0038 DST end date 0= No DST / month(1-12) x 100 + week(1-5) x 10 + day 1057 0 0
(1-7:Mon-Sun)
41-0039 DST end time 0-2359: 0:00-23:59 300 200 200
41-0040 Service time / lag time / grace time 0= No / 1= Yes 0 add
change function for each rate
41-0041 A rate service time 0-2400= 0:00-24:00 0 add
41-0042 B rate service time 0 add
41-0043 C rate service time 0 add
41-0044 D rate service time 0 add
41-0045 E rate service time 0 add
41-0046 F rate service time 0 add
41-0047 G rate service time 0 add
41-0048 H rate service time 0 add
41-0049 I rate service time 0 add
41-0050 J rate service time 0 add
41-0051 K rate service time 0 add
41-0052 L rate service time 0 add
41-0053 A rate grace time 0 add
41-0054 B rate grace time 0 add
41-0055 C rate grace time 0 add
41-0056 D rate grace time 0 add
41-0057 E rate grace time 0 add
41-0058 F rate grace time 0 add
41-0059 G rate grace time 0 add
41-0060 H rate grace time 0 add
41-0061 I rate grace time 0 add
41-0062 J rate grace time 0 add
41-0063 K rate grace time 0 add
41-0064 L rate grace time 0 add
41-0065 A rate lag time 0 add
41-0066 B rate lag time 0 add
41-0067 C rate lag time 0 add
41-0068 D rate lag time 0 add
41-0069 E rate lag time 0 add
41-0070 F rate lag time 0 add
41-0071 G rate lag time 0 add
41-0072 H rate lag time 0 add
41-0073 I rate lag time 0 add
41-0074 J rate lag time 0 add
41-0075 K rate lag time 0 add
41-0076 L rate lag time 0 add
41-0077 One time pass card swallowing 0= No / 1= Yes 0

- 120 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


41-0078 Adding to category total when event card 0= No / 1= Yes 0 a
or one time pass card was used dd
41-0079 Valid period printing when event card or 0= No / 1= Yes 0 add
one time pass card was used
41-0080 Event card / one time pass card mode 0= Not use / 1= Use as event card / 2= Use as one time pass card 0 add
41-0081 Event card anti pass back check 0= No / 1= Yes 1 add
41-0082 First time card reading 0= No / 1= Yes 0 add
41-0083 Expiration date check 0= Check / 1= Not check / 2= Check the expiration date only / 3= 0 add
Check the start date only
41-0084 Type 1 fee rate 1-12= A-L rate 1 add
41-0085 Type 2 fee rate 1 add
41-0086 Type 3 fee rate 1 add
41-0087 Type 4 fee rate 1 add
41-0088 Type 5 fee rate 1 add
41-0089 Type 6 fee rate 1 add
41-0090 Type 7 fee rate 1 add
41-0091 Type 8 fee rate 1 add
41-0092 Type 1 date change time 0000-2359= 0:00-23:59 0 add
41-0093 Type 2 date change time 0 add
41-0094 Type 3 date change time 0 add
41-0095 Type 4 date change time 0 add
41-0096 Type 5 date change time 0 add
41-0097 Type 6 date change time 0 add
41-0098 Type 7 date change time 0 add
41-0099 Type 8 date change time 0 add
41-0100 Type 1 No. of vehicles Count 4= Count No. of vehicles 1 7 add
41-0101 Type 2 No. of vehicles Count 5= Count No. of vehicles 2 7 add
41-0102 Type 3 No. of vehicles Count 6= Count both 7 add
41-0103 Type 4 No. of vehicles Count 7= not count 7 add
41-0104 Type 5 No. of vehicles Count 7 add
41-0105 Type 6 No. of vehicles Count 7 add
41-0106 Type 7 No. of vehicles Count 7 add
41-0107 Type 8 No. of vehicles Count 7 add
41-0108 Complimentary ticket swallowing 0= No / 1= Yes 0
41-0109 Adding to category total when 0= No / 1= Yes 0 add
complementary ticket data was received
41-0110 Complementary ticket usage 0= Not use / 1= Use (no expiration date) / 2= Use (with expiration 0 add
date)
41-0111 Fee rate for complimentary ticket 1-12= A-L rate 1 add
41-0112 Complementary ticket no. of vehicles 4= Count No. of vehicles 1 / 5= Count No. of vehicles 2 / 6= Count 7 add
Count both / 7= Mot count
41-0113 Complimentary ticket count signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal 2 / 2= signal 1 and 2 both / 3= Not output
41-0114 Adding to category total when proximity 0: No / 1= Yes 0 add
card data was received
41-0115 Proximity card no. of vehicles Count 4= Count No. of vehicles 1 / 5= Count No. of vehicles 2 / 6= Count 7 add
both / 7= not count
41-0116 License plate number information for host 0= No License plate number information 0
communication data 1= With License plate number information
41-0117 LPR related. 0= No inquiry 0
Online server inquiry timer 1-60= Inquire after 1-60 sec. of LC1 ON.
100-60000= Inquire after 0.1-60.0 sec. of LC1 ON.
If LPR discount function is required, 43-0044 has to be set 1.
41-0118 Multiple tax calculation 0= Not used / 1= Separately tax / 2= Compound tax 0
41-0119 Tax rate 1 0= No tax / 1-9999= 0.01-99.99% 0
41-0120 Tax rate 2 0= No tax / 1-9999= 0.01-99.99% 0
41-0121 Tax rate 3 0= No tax / 1-9999= 0.01-99.99% 0
41-0122 Tax rate 4 0= No tax / 1-9999= 0.01-99.99% 0
41-0123 Service time after time discount 0= Decided by entry time / 1= Decided after discount 0
41-0124 Service time after the grace time 0= Decided by entry time / 1= Decided after grace time calculated 0
41-0125 Start Payment Button (related to Flat Rate 0= Not use / 1= Use 1
function)
41-0126 Journal paper out warning 0= Sending when journal paper is completely out 0
1= Sending when journal paper is near end
41-0127 Receipt paper out warning 0= Sending when receipt paper is completely out 0
1= Sending when receipt paper is near end
41-0128 Close mag-reader shutter when LPR 0= No / 1= Yes 1
system use
41-0129 Reserved
41-0130 Reserved

- 121 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


41-0131 Debit card usage 0= No / 1= Yes 0
(cannot use along with prepaid card or coupon ticket.)
41-0132 Initial debit card reading 0= No / 1= Yes 0
41-0133 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
41-0134 Use with parking ticket, or not 0= No / 1= Yes (entry ticket is required) / 2= Either 2
41-0135 Applied rate when the debit card is 0= Ticket rate / 1= Debit card fee rate (41-0142) 0
used with parking ticket
41-0136 Verification 0= No / 1= Yes 0
41-0137 Zero balance debit card swallowing 0= No / 1= Yes 0
41-0138 Vehicle count signal output 0= Count signal 1 / 1= Count signal 2 / 2= signal 1 and 2 both / 3= 0
Not output
41-0139 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
41-0140 Anti pass back check (EPS only) 0= No / 1= Yes (by card) 0
41-0141 When balance is lower than fee 0= Payment cancel and card return / 1= Payment continue 0
41-0142 Fee rate 1-12= A-L rate 1
41-0143 Discount amount 0-999999= 0-999999 Yen 0
41-0144 Initial charge (sale)/recharge function 0= No / 1= Yes 0
41-0145 Fee rate for initial charge (sales) 0= Same as debit card fee rate (41-0142) 0
Amount 1-12= A-L rate
41-0146 Fee rate for recharge amount 0= Same as debit card fee rate (41-0142) 0
1-12= A-L rate
41-0147 Maximum recharge amount 0-999999= 0-999999 Yen 30000
41-0148 Unit amount for echarge 0-999999= 0-999999 Yen 1000
41-0149 Service rate for sales/recharge 0= No service / 1-100= 1-100% 0
Ex.)
Service rate= 10%
Sales amount= $10.00
Amount encoded on the debit card= $11.00
41-0150 Handling of the fractions of service 00= last digit of the service amount is cut off. 0
rate 01= last 2 digits of the service amount is cut off.
10= last digit of the service-added amount is cut off.
11= last 2 digits of the service-added amount is cut off.
02= below least significant valid digit (1st) of the service amount is cut
off.
03= less than 5 least significant valid digit (1st) of the service amount
is cut off.
04= less than 5 for 2nd valid digit of the service amount is cut off.
12= below least significant valid digit (1st) of the service-added
amount is cut off.
13= less than 5 least significant valid digit (1st) of the service-added
amount is cut off.
14= less than 5 for 2nd valid digit of the service-added amount is cut
off.
41-0151 (Reserved) 0
41-0152 Sales/recharge amount 1 0-999999= 0-999999 Yen 0
41-0153 Encode amount on the card 1 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0154 Sales/recharge amount 2 0-999999= 0-999999 Yen 0
41-0155 Encode amount on the card 2 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0156 Sales/recharge amount 3 0-999999= 0-999999 Yen 0
41-0157 Encode amount on the card 3 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0158 Sales/recharge amount 4 0-999999= 0-999999 Yen 0
41-0159 Encode amount on the card 4 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0160 Sales/recharge amount 5 0-999999= 0-999999 Yen 0
41-0161 Encode amount on the card 5 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0162 Sales/recharge amount 6 0-999999= 0-999999 Yen 0
41-0163 Encode amount on the card 6 0= Follow service rate for sales/recharge (41-0149) 0
1-999999= 1-999999 Yen
41-0164 Expired Debit Card (Mifare Card only) 0= No (do not accept) 1
accepting (payment) 1= Yes (accept)
2= Check the expiration date only
3= Check the start date only
41-0165 Expired Debit Card (Mifare Card only) 0= No (do not accept) 1
accepting (sales/recharge) 1= Yes (accept)
2= Check the expiration date only
3= Check the start date only

- 122 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


41-0166 Fee rate switch (1) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0167 Fee rate switch (1) start time 0-2359= 00:00-23:59 0
41-0168 Fee rate switch (1) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0169 Fee rate switch (2) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0170 Fee rate switch (2) start time 0-2359= 00:00-23:59 0
41-0171 Fee rate switch (2) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0172 Fee rate switch (3) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0173 Fee rate switch (3) start time 0-2359= 00:00-23:59 0
41-0174 Fee rate switch (3) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0175 Fee rate switch (4) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0176 Fee rate switch (4) start time 0-2359= 00:00-23:59 0
41-0177 Fee rate switch (4) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0178 Fee rate switch (5) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0179 Fee rate switch (5) start time 0-2359= 00:00-23:59 0
41-0180 Fee rate switch (5) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0181 Fee rate switch (6) by entry time 0= No / 1-12= A-L rate (ticket only) 0
41-0182 Fee rate switch (6) start time 0-2359= 00:00-23:59 0
41-0183 Fee rate switch (6) end time If start time=end time, no fee rate switch is applied. 0
No over rap with others.
41-0184 Reserved
41-0185 Use IBK Storage Memory 0= No / 1= Yes 0
41-0186 Usage of IBK Storage Memory 0= Pass card table (Fixed) 0
41-0187 Reserved

41-0191 Reserved
41-0192 Event card/One time pass card 0= No / 1= Yes 1
Expired card accepting
41-0193 Type 1 Count signal 0= Payment (Exit) completed signal 1 0
41-0194 Type 2 Count signal 1= Payment (Exit) completed signal 2 0
41-0195 Type 3 Count signal 2= signal 1 and 2 both 0
41-0196 Type 4 Count signal 33= Not output 0
41-0197 Type 5 Count signal 0
41-0198 Type 6 Count signal 0
41-0199 Type 7 Count signal 0
41-0200 Type 8 Count signal 0

- 123 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-5. Custom Setting for Specific Country (Standard)


Note: Parameter 42-0001 - 42-0200 is for the specific country, so the default value depends on the software version. Standard version (ATAS
version)’s default value is all 0.

4-5-1. AKC
Address Item Setting Range Default 77 79
42-0001 - 0050 Korea Transportation Card setting
42-0001 Transportation Card Payment 0=Not Accept / 1=Accept / 11=Enable Credit Card Payment 0
* If 42-0001=3, parameter should be 38-0001=0
42-0002 Transportation Card max. payable amount 1-999990 (1-999990 yen) / 0= Not check 0
42-0003 Transportation Card payment automatic 0= No / 1= Yes 0
receipt issuing
42-0004 Transportation Card payment mark print on 0= No / 1= Yes 0
the paid ticket
42-0005 Data receiving timer (TEXT) 01-99= 1-99 s (unit : 1s) 20
42-0006 Reserved 0
42-0007 Reserved 0
42-0008 Reserved 0
42-0009 ID number printing on the receipt 0= Print all digits / 1= Print first 4 digits only, the other digits will 1
be “*” printed. / 2= Print last 4 digits only, the other digits will be
“*” printed
42-0010 Card usage with cash 0= No / 1= Yes 1
42-0011 Transportation Card server port number 00000-99999 0
42-0012 Transportation Card server IP address (1) 000-255 0
42-0013 Transportation Card server IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0014 Transportation Card server IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0015 Transportation Card server IP address (4) 0
42-0016 Number of connection retry 01-98= 1-98 times, 99= infinitive 0
42-0017 Connection watchdog timer 01-99= 1-99s (unit : 1s) 2
42-0018 Number of packet sending retry 01-98= 1-98 times, 99= infinitive 0
42-0019 Packet watchdog timer 01-99= 1-99s (unit : 1s) 5
42-0020 Receiving result watchdog timer (ARCNET) 01-99= 1-99s (unit : 1s) 5
42-0021 Ethernet initial setting 0= Yes / 1= No 0
42-0022 DHCP usage 0= No / 1= Yes 0
42-0023 Own port number 0-32767 0
42-0024 Own IP address (1) 000-255 0
42-0025 Own IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0026 Own IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0027 Own IP address (4) 0
42-0028 Subnet mask Number of host address bit 0-24 0
Ex.) class C (255.255.255.0)=08
class B (255.255.0.0)=16
class A (255.0.0.0)=24
42-0029 Default gateway IP address (1) 000-255 0
42-0030 Default gateway IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0031 Default gateway IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0032 Default gateway IP address (4) 0
42-0033 Reserved 0
42-0034 Reserved 0
42-0035 Reserved 0
42-0036 Reserved 0
42-0037 Reserved 0
42-0038 Reserved 0
42-0039 Reserved 0
42-0040 Reserved 0
42-0041 Title of the receipt 0= “Receipt” / 1= “Full Statement” / 2= “Full Statement” when only 0
the Trans Card was used to pay (no cash)
42-0042 Transportation Card guide display when the 0= No / 1= Yes 0
fee was shown
42-0043 Transportation Card usage amount will be 0= No / 1= Yes 0
added to total sales amount or not
42-0044 Transportation Card usage amount will be 0= No / 1= Yes 0
added to total credit amount or not
42-0045 Card reader type 0= Transportation card reader / 1= T-Money reader /2= 0
Transportation card reader + T-Money reader
42-0046 T-Money maximum payable amount 1-999990 (1-999990 yen) / 0= Not check 0
42-0047 T-Money amount; add to total sales amount 0= No / 1= Yes 0
42-0048 T-Money amount; add to total credit amount 0= No / 1= Yes 0
42-0049 T-Money IN/OUT 0= No / 1= Yes with online server only 0
42-0050 T-Money IN/OUT payment button 0= Not displayed / 1= Displayed 1

- 124 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


42-0001 - 0050 Korea Period Card Setting
42-0051 Adding to category total when Period Card 0= No / 1= Yes 0
was used
42-0052 Valid period printing on the receipt when 0= No / 1= Yes 0
Period Card was used
42-0053 Period Card usage 0= No / 1= Yes 0
42-0054 Period Card anti pass back check 0= No / 1= Yes 1
42-0055 Period Card First time card reading 0= No / 1= Yes 0
42-0056 Used period card swallowing 0= No / 1= Yes 0
42-0057 Period Card fee rate 1-12= A-L rate 1
42-0058 Period Card No. of vehicles Count 4= Count No. of vehicles 1 / 5= Count No. of vehicles 2 / 6= 7
Count both / 7= Not count
42-0059 Period Card count signal 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) 0
completed signal 2 / 2= signal 1 and 2 both / 3= Not output
42-0060 Expired period card accepting 0= No / 1= Yes 1
42-0061 Expired period card swallowing 0= No / 1= Yes 0

Address Item Setting Range Default 77 79


42-0071 - 0076 Online Number Input Discount
42-0071 Online Number Input Discount Usage 0= No / 1= Yes 0
42-0072 Number of character 1 0= No / 1-20= 1-20 digits 0
42-0073 Number of character 2 (Sum of Number of character 1-3 has to be less than 20 digits.) 0
42-0074 Number of character 3 0
42-0075 Input number display after discount 0= No / 1= Yes 0
42-0076 Input number print on the receipt 0= No / 1= Yes 0

Address Item Setting Range Default 77 79


42-0081 - 0090 Korea
42-0081 License Place No. Payment usage 0= No / 1= Yes 0
42-0082 Parking Space Confirmation usage 0= No / 1= Yes 0
42-0083 Input License Place No. Digit 1-20 = 1-20 digits 4
42-0084 Parking Space Useage Digit 1-8 = 1-8 digits 6
42-0085 Timer of LPN Input sceen, LPN Select screen 0= No / 1-99= 1-99 sec. 30
and Parking Space Confirmation usage screen
42-0086 Display Parking Space information and Entry 0= No / 1= Yes 1
Date/Time on Payment Screen
42-0087 Reserved 0
42-0088 Display LPN Select Scteen 0= When there is duplicated number / 1= Always 1
42-0089 Reserved 0
42-0090 Reserved 0

Address Item Setting Range Default 77 79


42-0091 - 0102 Korea
42-0091 Cash Receipt usage 0= No / 1= Yes 0
42-0092 Minimum Disit of Inpur Number 1-20 = 1-20 digits 1
42-0093 Maximum Disit of Inpur Number 1-20 = 1-20 digits 20
42-0094 Separated Location 1 of Inpur Number 0= No / 1-19 0
42-0095 Separated Location 2 of Inpur Number 0= No / 1-19 0
42-0096 Input Number Display usage 0= No / 1= Yes 1
42-0097 Receipt Print/Display of Inpur Number 0= Print all digits. 1
1= Print first 4 digits only, the other digits will be “*” printed.
2= Print last 4 digits only, the other digits will be “*” printed.
3= Printll digits will be “*”.
42-0098 Time for display after payment is complted on 0= No / 1-99 = 1-99 sec. 30
input screen
42-0099 Approval Nu. Digits 0= 6 digits / 1-10= 1-10 digits 1
42-0100 Issue Cash Receipt without Input Number 0= No / 1= Yes 0
42-0101 Issue Cash Recipt automaltically 0= No / 1= Yes 0
42-0102 Reserved 0

Address Item Setting Range Default 77 79


42-0151 - 0153 Flap system setting (for AKC only)
42-0151 Enable Flap System 0= No / 1= Yes 0
42-0152 Timeout to wait for parking spot data 0-999 (sec.) 10
42-0153 Timeout to wait for status of down position of 0-999 (sec.) 60
stopper

- 125 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-5-2. AE
Address Item Setting Range Default 77 79
42-0001 - 0010 Fiscal Printer Setting
42-0001 Reserved 0
42-0002 Reserved 0
42-0003 Reserved 0
42-0004 Reserved 0
42-0005 Reserved 0
42-0006 Reserved 0
42-0007 Reserved 0
42-0008 Reserved 0
42-0009 Reserved 0
42-0010 Reserved 0

Address Item Setting Range Default 77 79


42-0061 - 0080 Pay-in-Advance setting (for AE only)
42-0061 Pay-in-Advance enable/disable 0= Disable / 1= Enable 0
42-0062 Pay-in-Advance Mode 0= Manual Button / 1= Auto 0
42-0063 Pay-in-Advance Type 0= Exit Time / 1= Parking Fee / 2=Time of unit 0
42-0064 Time unit for increase/decrease button 0000-2359 0
42-0065 Pay-in-Advance Mark printing on Tickets 0= No/ 1= Yes 0
42-0066 Pay-in-Advance Applicable Rate 0= Rate on tickets / 1-12= A-L 0
42-0067 Pay-in-Advance The displayed Fee inexit time 0= Original Fee / 1= After discounted 0
mode
42-0068 Pay-in-Advance Starting Time 9999: Same as Parking Lot / 0000-2359 0
42-0069 Pay-in-Advance Intended exit time 1 9999= Not used / 0000-2359 0
42-0070 Pay-in-Advance Intended exit time 2 9999= Not used / 0000-2359 0
42-0071 Pay-in-Advance Intended exit time 3 9999= Not used / 0000-2359 0
42-0072 Pay-in-Advance Intended exit time 4 9999= Not used / 0000-2359 0
42-0073 Pay-in-Advance Intended exit time 5 9999= Not used / 0000-2359 0
42-0074 Pay-in-Advance Intended exit time 6 9999= Not used / 0000-2359 0
42-0075 Pay-in-Advance Operation enable time 0= No limit / 0001-2359 0
42-0076 Pay-in-Advance Enable to exit time 0000-2359 0
42-0077 Pay-in-Advance function available when fee=0 0= Not available / 1= Available 0
42-0078 Reserved 0
42-0079 Reserved 0
42-0080 Reserved 0

- 126 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


42-0101 - 0150 Belgium Proton Card setting
42-0101 Proton Card Payment 0= No / 1= Yes 0
42-0102 Proton Card max. payable amount 1-999990 (1-999990 yen) / 0= Not check 0
42-0103 Proton Card payment automatic receipt 0= No / 1= Yes 0
issuing
42-0104 Proton Card payment mark print on the paid 0= No / 1= Yes 0
ticket
42-0105 Data receiving timer (TEXT) 01-99= 1-99 s (unit : 1s) 20
Note: This timer is for IBW pcb (=main control).
42-0106 Proton Card min. payable amount 1-999990 (1-999990 yen) / 0= Not check 2
42-0107 Collection complete waiting timer 1-50= 1-50 minute 5
(This timer starts when the modem is connected on line, and
ends when the collection is finished.)
42-0108 Reserved 0
42-0109 Proton card number printing on the receipt 0= Print all digits. 1
1= Print first 4 digits only, the other digits will be “*” printed.
2= Print last 4 digits only, the other digits will be “*” printed.
42-0110 Card usage with cash 0= No / 1= Yes 1
42-0111 Proton PCC port number (not available) 00000-32767 0
42-0112 Proton PCC IP address (1) (not available) 000-255 0
42-0113 Proton PCC IP address (2) (not available) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0114 Proton PCC IP address (3) (not available) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0115 Proton PCC IP address (4) (not available) 0
42-0116 Number of connection retry (not available) 01-99= 1-98 times, 99= infinitive 0
42-0117 Connection watchdog timer (not available) 01-99= 1-99s (unit : 1s) 0
42-0118 Number of packet sending retry (not available) 01-99= 1-98 times, 99= infinitive 0
42-0119 Packet watchdog timer (not available) 01-99= 1-99s (unit : 1s) 5
42-0120 Receiving result watchdog timer (ARCNET) 01-99= 1-99s (unit : 1s) 5
42-0121 Ethernet initial setting (not available) 0= Yes / 1= No 0
42-0122 DHCP usage (not available) 0= No / 1= Yes 0
42-0123 Own port number (not available) 0-32767 1001
42-0124 Own IP address (1) (not available) 000-255 0
42-0125 Own IP address (2) (not available) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0126 Own IP address (3) (not available) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0127 Own IP address (4) (not available) 0
42-0128 Subnet mask (not available) Number of host address bit 0-24 0
Ex.) class C (255.255.255.0)=08
class B (255.255.0.0)=16
class A (255.0.0.0)=24
42-0129 Default gateway IP address (1) (not available) 000-255 0
42-0130 Default gateway IP address (2) (not available) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
42-0131 Default gateway IP address (3) (not available) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
42-0132 Default gateway IP address (4) (not available) 0
42-0133 Reserved 0
42-0134 Reserved 0
42-0135 Reserved 0
42-0136 Reserved 0
42-0137 Reserved 0
42-0138 Reserved 0
42-0139 Reserved 0
42-0140 Reserved 0
42-0141 Title of the receipt 0= Always “Receipt” 1= When proton card is used, “Full 1
Statement” (double size)2= When only proton card is (no cash),
“Full Statement”
42-0142 Proton Card guide display when the fee was 0= No / 1= Yes 1
shown
42-0143 Proton Card usage amount will be added to 0= No / 1= Yes 1
total sales amount or not
42-0144 Proton Card usage amount will be added to 0= No / 1= Yes 1
total credit amount or not
42-0145 Card type 0= Proton 0
42-0146 Proton card reader type 0= C-ZAM (made by Banksys) 0
42-0147 Currency code 0= Belgium / 1= Nederland / 2= Switzerland / 3= Australia / 6
4=Sweden / 5= Canada / 6= EURO (6 fixed)
42-0148 Automatic collection time 0-2359= 0:00-23:59 / 9999= No automatic collection 0
42-0149 Journal record 0= No / 1= Yes 11
1st digit: Collection record
2nd digit: Error record
Ex.) 01  collection is recorded, error is not recorded.
42-0150 Reserved 0

- 127 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


42-0161 - 0200 AE Chip & Pin Setting
42-0161 Enable Chip and PIN function 0= No / 1= Yes 0
42-0162 Chip and PIN Payment Limit Amount 0= No limit / 1-999999 30000
42-0163 Automatic Receipt Issue for Chip and PIN 0= No / 1= Yes 1
Payment
42-0164 Mark Print on the Ticket for Chip and PIN 0= No / 1= Yes 0
Payment
42-0165 Data Receive Waiting Timer (for IBW) 1-99= 1-99 sec 20
42-0166 Chip and PIN Payment Minimum Amount 0= No check / 1-999999 0
42-0167 Card number printing on the receipt 0= Print all digits. 1
1= Print first 4 digits only, the other digits will be “*” printed.
2= Print last 4 digits only, the other digits will be “*” printed.
42-0168 Chip and PIN Payment with Cash 0= No / 1= Parking Fee Only / 2= Parking Fee and Pass Card 0
Renewal
42-0169 Title of Receipt 0= [Receipt] 1
1= [Full Statement] (either w/ or w/o cash)
2= [Full Statement] (w/o cash only)
42-0170 Chip and PIN” Guidance Display on Fee 0= No / 1= Yes 1
screen
42-0171 Include the paid amount by Chip & PIN card in 0= No / 1= Yes 0
the total sales amount
42-0172 Include the paid amount by Chip & PIN card in 0= No / 1= Yes 0
the total discount amount
42-0173 Chip and PIN Unit Type 0=Thales Artema Modular Set 0
42-0174 PIN Input Waiting Timer (for IBW) 1-600= 1-600 sec 120
42-0175 Reserved 0
42-0176 Guidance of the PIN Code Input 0= No / 1= Yes 1
42-0177 Card Process Stop Sequence 0=Reset Sequence / 1=Cancel Sequence 0
42-0178 ICC DEBUG DATA 0=None / 1=Exist 0
42-0179 Data Link Layer Receive(ACK)Response 10-10000= 10-10000 ms 100
Waiting Timer
42-0180 Data Link Layer Retry when Communication 0-99= 0-99 times 5
Error
42-0181 Chip & PIN Response Waiting Timer 10-10000= 10-10000 ms 5000
42-0182 Chip & PIN Polling Interval Timer 10-10000= 10-10000 ms 100
42-0183 VMC Feature Level 0-255= Level 0-255 3
42-0184 Columns on Display 0= No / 1-255= 1-255 Columns 0
42-0185 Rows on Display 0= No / 1-255= 1-255 Rows 0
42-0186 Display Type 0=Numbers, Capital letters, Blank and Decimal point 0
1=Full ASCII
42-0187 Maximum Fee 0-999999 999999
42-0188 Minimum Fee 0-999999 0
42-0189 Currency Code (For Chip and PIN) ISO 4217 Currency Cod 826 = Pound Sterling (UK) 826
42-0190 Optional Function Expansion bit: 0= No / 1= Yes 1
File Transport Layer
42-0191 Optional Function Expansion bit: 0= 16bit / 1= 32bit 1
Currency Format
42-0192 Optional Function Expansion bit: 0= No / 1= Yes 1
Multi Currency Symbol/Language
42-0193 Optional Function Expansion bit: 0= No / 1= Yes 0
Negative Sales
42-0194 Optional Function Expansion bit: 0= No / 1= Yes 0
Data Input
42-0206 Reserved 0
42-0207 Reserved 0
42-0208 Reserved 0
42-0209 Reserved 0
42-0190 Reserved 0

- 128 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-5-3. Taiwan
Address Item Setting Range Default 77 79
42-0001 - 0020
42-0001 Taiwan Unified Receipt printer 0= Normal printer 0
1= Unified receipt printer (1unit)
2= Unified receipt printer (2units)
42-0002 Number of receipt 0-999 0
42-0003 Number of receipt for paper end alarm 0-999 0
42-0004 Automatic Issue of United Receipt 0=No / 1=Yes 0
42-0005 Reserved 0
42-0006 Reserved 0
42-0007 Reserved 0
42-0008 Reserved 0
42-0009 Reserved 0
42-0010 Reserved 0
42-0011 Ticket/pass card format 0= Normal 0
1= Paid ticket= Old ticket format / Others= normal
2= Ticket/card with LPI number (Taiwan format)
*If 42-0011=1 or 2, parameter should be 41-0032=0 and
06-0005=0.
FB6000 should have custom firmware.
42-0012 Reserved 0
42-0013 Reserved 0
42-0014 Reserved 0
42-0015 Reserved 0
42-0016 Reserved 0
42-0017 Reserved 0
42-0018 Reserved 0
42-0019 Reserved 0
42-0020 Reserved 0

- 129 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-6. Online Server Connectivity Setting


Address Item Setting Range Default 77 79
43-0001 Online server connection 0= Not connected / 1= Connected 0
43-0002 Data receiving timer (inquiry) 01-99 : 1-99 s (unit : 1s) 3
43-0003 Data receiving timer (maintenance) 01-99 : 1-99 s (unit : 1s) 10
43-0004 Unused 0
43-0005 Unused 0
43-0006 Online server port number 00000-32767 0
43-0007 Online card server IP address (1) 000-255 0
43-0008 Online card server IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
43-0009 Online card server IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
43-0010 Online card server IP address (4) 0
43-0011 Number of connection retry 01-99 : 1-98 times, 99= infinitive 1
43-0012 Connection watchdog timer 01-99 : 1-99s (unit : 1s) 10
43-0013 Connection send interval timer 01-99 : 1-99s (unit : 1s) 10
43-0014 Number of packet sending retry 01-99 : 1-98 times, 99= infinitive 1
43-0015 Packet watchdog timer 01-99 : 1-99s (unit : 1s) 2
43-0016 Number of packet sending retry end decision 01-99 : 1-98 times 2
43-0017 Receiving result watchdog timer (ARCNET) 01-99 : 1-99s (unit : 1s) 20
43-0018 Send data when buffer is full 0= Old data is omitted / 1= New data is omitted / Stop 0
43-0019 Resend data interval timer 01-99 : 1-99s (unit : 1s) 3
43-0020 Ethernet default setting 0= Set / 1= Not set 0
43-0021 DHCP usage 0= No / 1= Yes 0
43-0022 Own port number 0-32767 0
43-0023 Own IP address (1) 000-255 0
43-0024 Own IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
43-0025 Own IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
43-0026 Own IP address (4) 0
43-0027 Subnet mask Number of host address bit 0-24 0
Ex.) class C (255.255.255.0)=08
class B (255.255.0.0)=16
class A (255.0.0.0)=24
43-0028 Default gateway IP address (1) 000-255 0
43-0029 Default gateway IP address (2) *** . *** . *** . *** = (1) . (2) . (3) . (4) 0
43-0030 Default gateway IP address (3) Ex. IP address =172.56.8.72, (1)=172, (2)=56, (3)=8, (4)=72 0
43-0031 Default gateway IP address (4) 0
43-0032 Unused
43-0033 Unused
43-0034 Unused
43-0035 In operation / Out of operation when network 0= Open (In Operation) / 1=Close (Out of Operation) 0
error
43-0036 Inquiry data (Reserved) 0=No (do not inquire) 0
43-0037 Inquiry data (Pass card renewal) 1=Inquire 0
43-0038 Inquiry data (Debit card sale) 0
43-0039 Inquiry data (Debit card recharge) 0
43-0040 Inquiry data (Reserved) 1st digit; Valid Online Information 0
43-0041 Inquiry data (Reserved) 0= No (Do not inquire) 0
43-0042 Inquiry data (Reserved) 1= Discount Info and Card Info (Card Type, Valid Period, Status, 0
43-0043 Inquiry data (Periodic card) * AKC only Process Date) 0
43-0044 Inquiry data (Reserved) 2= Discount Info and Card Info (Card Type, Valid Period) 0
43-0045 Inquiry data (Debit card) 9= Discount Info only 0
43-0046 Inquired discount data usage (Event card / One 0
time pass card)
43-0047 Inquiry data (Reserved) 2nd digit; Card Validity when No Reply from Online Server 0
43-0048 Inquiry data (Pass card) 0= Card Invalid 0
43-0049 Inquiry data (Parking Ticket) 1= Card Valid (by Encoded Data) 0
43-0050 Payment / Exit transaction data sending 0= Sending with inquiry 0
1= Sending without inquiry
2= Sending without inquiry (including Lost ticket payment, Manual
payment, Complimentary ticket)

- 130 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


43-0051 Renewal transaction data sending 0= Sending with inquiry 0
1= Sending without inquiry
43-0052 Unused
43-0053 Unused
43-0054 Unused
43-0055 Unused
43-0056 Unused
43-0057 Unused
43-0058 Rate switch for communication data 0= Send the amount data as it is 0
1= Send the tenth of amount data (1/10)
2= Send the hundredth of amount data (1/100)
43-0059 Card information data format 0= Former specification (Japan standard) 1
1= New specification
2= 2nd specification
43-0060 Inquire data format 0=standard / 1=Entry date added (parking ticket) 0
43-0061 Add online discount amount to the total sales 0= Not add to the total sales amount / 1= Add to the total sales 0
amount amount
43-0062 Add online discount amount to the total 0= Not add to the total discount amount / 1= Add to the total 0
discount amount discount amount
43-0063 ISO track2 card (1) online discount 0= No / 1= Yes 0
43-0064 Card ID number start position 1-37: 1-37 digit 0
43-0065 Card ID number # of character 1-17: 1-17 digit 0
43-0066 Card number start position 1-37: 1-37 digit 0
43-0067 Card number # of character 1-20: 1-20 digit 0
43-0068 Card info after discounted 0= Not display / 1= Display (AKC version only) 0
43-0069 Card number print on receipt 0= No / 1= Yes 0
43-0070 ISO track2 card (2) online discount 0= No / 1= Yes 0
43-0071 Card ID number start position 1-37: 1-37 digit 0
43-0072 Card ID number # of character 1-17: 1-17 digit 0
43-0073 Card number start position 1-37: 1-37 digit 0
43-0074 Card number # of character 1-20: 1-20 digit 0
43-0075 Card info after discounted 0= Not display / 1= Display (AKC version only) 0
43-0076 Card number print on receipt 0= No / 1= Yes 0
43-0077 ISO track2 card (3) online discount 0= No / 1= Yes 0
43-0078 Card ID number start position 1-37: 1-37 digit 0
43-0079 Card ID number # of character 1-17: 1-17 digit 0
43-0080 Card number start position 1-37: 1-37 digit 0
43-0081 Card number # of character 1-20: 1-20 digit 0
43-0082 Card info after discounted 0= Not display / 1= Display (AKC version only) 0
43-0083 Card number print on receipt 0= No / 1= Yes 0
43-0084
43-0085 Online Discount Method 0= Discount according to Discount Ticket Type and Q’ty 0
1= Discount according to Discount Amount Data (or Discount Time
Data)
43-0086 Limitation of Online Discount data 0= No (applied for all online discounted data) / 1= Yes 0
43-0087 Unused

42-0101 Unused
42-0102 Online fee calculation method 0= Calculate at equipment / 1=Calculate at server 0
42-0103 Tax of online fee calculation usage 0= Calculate at equipment / 1=Calculate at server 1
42-0104 Online passcard renewal method 0= Calculate at equipment / 1=Calculate at server 0
42-0105 Tax of online passcard renewal usage 0= Calculate at equipment / 1=Calculate at server 1
42-0106 Online passcard renewal precedure 0= Input at equipment / 1=Get from server 0
42-0107 Unused

42-0150 Unused
43-0151 Barcode discount (AKC) 0= No / 1= Yes 0
43-0152 Barcode reader type (AKC) 0 fixed 0
43-0153 Print barcode number on receipt (AKC) 0= No / 1= Yes 0
43-0154 Display barcode on payment screen (AKC) 0= No / 1= Yes 0
43-0155 Barcode data receive method (AKC) 1 fixed 1
42-0156 Unused

43-0200 Unused 0

- 131 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-7. Invalid Management Card Registration


Address Item Setting Range Default 77 79
44-0001 Invalid management card 1 Invalid card number x 10 + sequential number 0
44-0002 Invalid management card 2 0
44-0003 Invalid management card 3 0
44-0004 Invalid management card 4 0
44-0005 Invalid management card 5 0
44-0006 Invalid management card 6 0

44-0200 Invalid management card 200 0

- 132 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-8. Custom Setting for Specific Country (Custom-order)


Address Item Setting Range AIT 77 79
46-0001 - 0249 Taiwan Setting (Dream Mall Specification) 16 Types Pass Card
46-0001 Unused
46-0002 Unused
46-0003 Unused
46-0004 Unused
46-0005 Unused
46-0006 Unused
46-0007 Unused
46-0008 Unused
46-0009 Unused
46-0010 Pass card 9 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0011 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0012 Read/write mode 0= Read/write / 1= Read only 0
46-0013 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0014 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0015 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0016 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0017 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0018 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0019 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0020 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0021 Unused 0
46-0022 Unused 0
46-0023 Expired pass card accepting 0= No / 1= Yes 1
46-0024 Support hotel pass card 0= No 0
(not available)
46-0025 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0026 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0027 Invalid day (Tuesday) 0
46-0028 Invalid day (Wednesday) 0
46-0029 Invalid day (Thursday) 0
46-0030 Invalid day (Friday) 0
46-0031 Invalid day (Saturday) 0
46-0032 Invalid day (Sunday) 0
46-0033 Invalid day (Special date) 0
46-0034 Invalid day (Special period 1) 0
46-0035 Invalid day (Special period 2) 0
46-0036 Invalid day (Special period 3) 0
46-0037 Unused 0
46-0038 Unused 0
46-0039 Unused 0

- 133 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0040 Pass card 10 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0041 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0042 Read/write mode 0= Read/write / 1= Read only 0
46-0043 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0044 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0045 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0046 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0047 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0048 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0049 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0050 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0051 Unused 0
46-0052 Unused 0
46-0053 Expired pass card accepting 0= No / 1= Yes 1
46-0054 Support hotel pass card 0= No 0
(not available)
46-0055 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0056 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0057 Invalid day (Tuesday) 0
46-0058 Invalid day (Wednesday) 0
46-0059 Invalid day (Thursday) 0
46-0060 Invalid day (Friday) 0
46-0061 Invalid day (Saturday) 0
46-0062 Invalid day (Sunday) 0
46-0063 Invalid day (Special date) 0
46-0064 Invalid day (Special period 1) 0
46-0065 Invalid day (Special period 2) 0
46-0066 Invalid day (Special period 3) 0
46-0067 Unused 0
46-0068 Unused 0
46-0069 Unused 0

- 134 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0070 Pass card 11 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0071 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0072 Read/write mode 0= Read/write / 1= Read only 0
46-0073 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0074 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0075 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0076 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0077 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0078 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0079 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0080 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0081 Unused 0
46-0082 Unused 0
46-0083 Expired pass card accepting 0= No / 1= Yes 1
46-0084 Support hotel pass card 0= No 0
(not available)
46-0085 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0086 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0087 Invalid day (Tuesday) 0
46-0088 Invalid day (Wednesday) 0
46-0089 Invalid day (Thursday) 0
46-0090 Invalid day (Friday) 0
46-0091 Invalid day (Saturday) 0
46-0092 Invalid day (Sunday) 0
46-0093 Invalid day (Special date) 0
46-0094 Invalid day (Special period 1) 0
46-0095 Invalid day (Special period 2) 0
46-0096 Invalid day (Special period 3) 0
46-0097 Unused 0
46-0098 Unused 0
46-0099 Unused 0

- 135 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0100 Pass card 12 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0101 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0102 Read/write mode 0= Read/write / 1= Read only 0
46-0103 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0104 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0105 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0106 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0107 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0108 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0109 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0110 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0111 Unused 0
46-0112 Unused 0
46-0113 Expired pass card accepting 0= No / 1= Yes 1
46-0114 Support hotel pass card 0= No 0
(not available)
46-0115 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0116 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0117 Invalid day (Tuesday) 0
46-0118 Invalid day (Wednesday) 0
46-0119 Invalid day (Thursday) 0
46-0120 Invalid day (Friday) 0
46-0121 Invalid day (Saturday) 0
46-0122 Invalid day (Sunday) 0
46-0123 Invalid day (Special date) 0
46-0124 Invalid day (Special period 1) 0
46-0125 Invalid day (Special period 2) 0
46-0126 Invalid day (Special period 3) 0
46-0127 Unused 0
46-0128 Unused 0
46-0129 Unused 0

- 136 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0130 Pass card 13 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0131 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0132 Read/write mode 0= Read/write / 1= Read only 0
46-0133 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0134 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0135 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0136 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0137 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0138 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0139 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0140 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0141 Unused 0
46-0142 Unused 0
46-0143 Expired pass card accepting 0= No / 1= Yes 1
46-0144 Support hotel pass card 0= No 0
(not available)
46-0145 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0146 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0147 Invalid day (Tuesday) 0
46-0148 Invalid day (Wednesday) 0
46-0149 Invalid day (Thursday) 0
46-0150 Invalid day (Friday) 0
46-0151 Invalid day (Saturday) 0
46-0152 Invalid day (Sunday) 0
46-0153 Invalid day (Special date) 0
46-0154 Invalid day (Special period 1) 0
46-0155 Invalid day (Special period 2) 0
46-0156 Invalid day (Special period 3) 0
46-0157 Unused 0
46-0158 Unused 0
46-0159 Unused 0

- 137 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0160 Pass card 14 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0161 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0162 Read/write mode 0= Read/write / 1= Read only 0
46-0163 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0164 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0165 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0166 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0167 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0168 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0169 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0170 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0171 Unused 0
46-0172 Unused 0
46-0173 Expired pass card accepting 0= No / 1= Yes 1
46-0174 Support hotel pass card 0= No 0
(not available)
46-0175 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0176 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0177 Invalid day (Tuesday) 0
46-0178 Invalid day (Wednesday) 0
46-0179 Invalid day (Thursday) 0
46-0180 Invalid day (Friday) 0
46-0181 Invalid day (Saturday) 0
46-0182 Invalid day (Sunday) 0
46-0183 Invalid day (Special date) 0
46-0184 Invalid day (Special period 1) 0
46-0185 Invalid day (Special period 2) 0
46-0186 Invalid day (Special period 3) 0
46-0187 Unused 0
46-0188 Unused 0
46-0189 Unused 0

- 138 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0190 Pass card 15 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0191 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0192 Read/write mode 0= Read/write / 1= Read only 0
46-0193 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0194 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0195 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0196 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0197 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0198 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0199 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0200 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0201 Unused 0
46-0202 Unused 0
46-0203 Expired pass card accepting 0= No / 1= Yes 1
46-0204 Support hotel pass card 0= No 0
(not available)
46-0205 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0206 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0207 Invalid day (Tuesday) 0
46-0208 Invalid day (Wednesday) 0
46-0209 Invalid day (Thursday) 0
46-0210 Invalid day (Friday) 0
46-0211 Invalid day (Saturday) 0
46-0212 Invalid day (Sunday) 0
46-0213 Invalid day (Special date) 0
46-0214 Invalid day (Special period 1) 0
46-0215 Invalid day (Special period 2) 0
46-0216 Invalid day (Special period 3) 0
46-0217 Unused 0
46-0218 Unused 0
46-0219 Unused 0

- 139 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


46-0220 Pass card 16 usage purpose 0= Not used / 1= Pass card (including time zone pass card) 0
2= Time discount pass card / 3-14= Rate change pass card
(3-14=A-L)
46-0221 In/out check 0= Not check 2
(Anti pass back check) 1= Status check (by communication)
2= Status check (by card)
3= Status check (if the status checked either by communication or by
card were OK, it is OK.)
4= Time comparison check (effective only if the pass card was used
together with the parking ticket.)
46-0222 Read/write mode 0= Read/write / 1= Read only 0
46-0223 Use with parking ticket, or not 0= No / 1=Yes / 2= Both 0
46-0224 Applied rate when the pass 0= Combined use with parking ticket / 1-12=A-L rate 1
card was not combined used
with parking ticket.
46-0225 Payment (Exit) completed 0= Payment (Exit) completed signal 1 / 1= Payment (Exit) completed 0
signal output signal 2 / 2= signal 1 and 2 both / 3= Not output
46-0226 Current no. of vehicle count 0= Not count / 1= Count the current no. of vehicle 1 / 2 = Count the 0
current no. of vehicle 2
46-0227 Pass card renewal function 0= No renewal function 0
and validity period (CPS) 001-024= renew monthly (1-24 months)
101-152= renew weekly (1-52 weeks)
46-0228 Charge for renewed pass 0-999999= 0-999999 yen 0
card
46-0229 Expiration date check 0= check / 1= not check / 2= check the expiration date only / 3= check 0
the start date only
46-0230 Card hold mode 1= Hold inside the reader / 2= Hold inside the V-printer 1
46-0231 Unused 0
46-0232 Unused 0
46-0233 Expired pass card accepting 0= No / 1= Yes 1
46-0234 Support hotel pass card 0= No 0
(not available)
46-0235 1 Night charge in case of 0= 0 yen 0
hotel pass card (not available)
46-0236 Invalid day (Monday) 0= No (valid) / 1= Yes (invalid) 0
46-0237 Invalid day (Tuesday) 0
46-0238 Invalid day (Wednesday) 0
46-0239 Invalid day (Thursday) 0
46-0240 Invalid day (Friday) 0
46-0241 Invalid day (Saturday) 0
46-0242 Invalid day (Sunday) 0
46-0243 Invalid day (Special date) 0
46-0244 Invalid day (Special period 1) 0
46-0245 Invalid day (Special period 2) 0
46-0246 Invalid day (Special period 3) 0
46-0247 Unused 0
46-0248 Unused 0
46-0249 Unused 0

- 140 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


47-0000 - 0119 Taiwan Setting (Dream Mall Specification) 16 Types Pass Card
Day Night Zone 1st Rate System
47-0000 Pass card 9 start time (discount time) (Day Night Zone 1st Rate System) 0
47-0001 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0002 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0003 Pass card 10 end time 0
47-0004 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0005 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0006 Pass card 12 start time (discount time) 0
47-0007 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0009 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0009 Pass card 13 end time 0
47-0010 Pass card 14 start time (discount time) 0
47-0011 Pass card 14 end time 0
47-0012 Pass card 15 start time (discount time) 0
47-0013 Pass card 15 end time 0
47-0014 0
47-0015 0
47-0016 0
47-0017 0
47-0018 0
47-0019 0
Day Night Zone 2nd Rate System
47-0020 Pass card 9 start time (discount time) (Day Night Zone 2nd Rate System) 0
47-0021 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0022 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0023 Pass card 10 end time 0
47-0024 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0025 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0026 Pass card 12 start time (discount time) 0
47-0027 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0028 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0029 Pass card 13 end time 0
47-0030 Pass card 14 start time (discount time) 0
47-0031 Pass card 14 end time 0
47-0032 Pass card 15 start time (discount time) 0
47-0033 Pass card 15 end time 0
47-0034 0
47-0035 0
47-0036 0
47-0037 0
47-0038 0
47-0039 0
Day Night Zone 3rd Rate System
47-0040 Pass card 9 start time (discount time) (Day Night Zone 3rd Rate System) 0
47-0041 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0042 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0043 Pass card 10 end time 0
47-0044 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0045 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0046 Pass card 12 start time (discount time) 0
47-0047 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0048 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0049 Pass card 13 end time 0
47-0050 Pass card 14 start time (discount time) 0
47-0051 Pass card 14 end time 0
47-0052 Pass card 15 start time (discount time) 0
47-0053 Pass card 15 end time 0
47-0054 0
47-0055 0
47-0056 0
47-0057 0
47-0058 0
47-0059 0

- 141 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range AIT 77 79


Regressive Zone 1st Rate System
47-0060 Pass card 9 start time (discount time) (Regressive Zone 1st Rate System) 0
47-0061 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0062 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0063 Pass card 10 end time 0
47-0064 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0065 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0066 Pass card 12 start time (discount time) 0
47-0067 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0069 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0069 Pass card 13 end time 0
47-0070 Pass card 14 start time (discount time) 0
47-0071 Pass card 14 end time 0
47-0072 Pass card 15 start time (discount time) 0
47-0073 Pass card 15 end time 0
47-0074 0
47-0075 0
47-0076 0
47-0077 0
47-0078 0
47-0079 0
Regressive zone 2nd rate system
47-0080 Pass card 9 start time (discount time) (Regressive zone 2nd rate system) 0
47-0081 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0082 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0083 Pass card 10 end time 0
47-0084 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0085 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0086 Pass card 12 start time (discount time) 0
47-0087 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0088 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0089 Pass card 13 end time 0
47-0090 Pass card 14 start time (discount time) 0
47-0091 Pass card 14 end time 0
47-0092 Pass card 15 start time (discount time) 0
47-0093 Pass card 15 end time 0
47-0094 0
47-0095 0
47-0096 0
47-0097 0
47-0098 0
47-0099 0
Regressive Zone 3rd Rate System
47-0100 Pass card 9 start time (discount time) (Regressive Zone 3rd Rate System) 0
47-0101 Pass card 9 end time In case of the time zone pass card, set the start / end time 0
47-0102 Pass card 10 start time (discount time) 0-2359= 0:00-23:59 0
47-0103 Pass card 10 end time 0
47-0104 Pass card 11start time (discount time) In case of start time = end time, normal pass card 0
47-0105 Pass card 11 end time End time is handled as the day change time for valid or invalid day. 0
47-0106 Pass card 12 start time (discount time) 0
47-0107 Pass card 12 end time In case of the time discount pass card, set the discount time. 0
47-0108 Pass card 13 start time (discount time) 0-959= 0:00-9:59 0
47-0109 Pass card 13 end time 0
47-0110 Pass card 14 start time (discount time) 0
47-0111 Pass card 14 end time 0
47-0112 Pass card 15 start time (discount time) 0
47-0113 Pass card 15 end time 0
47-0114 0
47-0115 0
47-0116 0
47-0117 0
47-0118 0
47-0119 0

- 142 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-9. Passcard Renewal Period Selection


Address Item Setting Range Taiwan 77 79
56-0001 Pass Card 1 Renewal 0=No / 1= Yes 0
56-0002 Fee for 1 month 0-999999= 0-999999 yen 0
56-0003 Fee for 2 month 0
56-0004 Fee for 3 month 0
56-0005 Fee for 4 month 0
56-0006 Fee for 5 month 0
56-0007 Fee for 6 month 0
56-0008 Fee for 7 month 0
56-0009 Fee for 8 month 0
56-0010 Fee for 9 month 0
56-0011 Fee for 10 month 0
56-0012 Fee for 11 month 0
56-0013 Fee for 12 month 0
56-0014 Unused 0

56-0040 Unused 0
56-0041 Pass Card 2 Renewal 0=No / 1= Yes 0
56-0042 Fee for 1 month 0-999999= 0-999999 yen 0
56-0043 Fee for 2 month 0
56-0044 Fee for 3 month 0
56-0045 Fee for 4 month 0
56-0046 Fee for 5 month 0
56-0047 Fee for 6 month 0
56-0048 Fee for 7 month 0
56-0049 Fee for 8 month 0
56-0050 Fee for 9 month 0
56-0051 Fee for 10 month 0
56-0052 Fee for 11 month 0
56-0053 Fee for 12 month 0
56-0054 Unused 0

56-0080 Unused 0
56-0081 Pass Card 3 Renewal 0=No / 1= Yes 0
56-0082 Fee for 1 month 0-999999= 0-999999 yen 0
56-0083 Fee for 2 month 0
56-0084 Fee for 3 month 0
56-0085 Fee for 4 month 0
56-0086 Fee for 5 month 0
56-0087 Fee for 6 month 0
56-0088 Fee for 7 month 0
56-0089 Fee for 8 month 0
56-0090 Fee for 9 month 0
56-0091 Fee for 10 month 0
56-0092 Fee for 11 month 0
56-0093 Fee for 12 month 0
56-0094 Unused 0

56-0120 Unused 0
56-0121 Pass Card 4 Renewal 0=No / 1= Yes 0
56-0122 Fee for 1 month 0-999999= 0-999999 yen 0
56-0123 Fee for 2 month 0
56-0124 Fee for 3 month 0
56-0125 Fee for 4 month 0
56-0126 Fee for 5 month 0
56-0127 Fee for 6 month 0
56-0128 Fee for 7 month 0
56-0129 Fee for 8 month 0
56-0130 Fee for 9 month 0
56-0131 Fee for 10 month 0
56-0132 Fee for 11 month 0
56-0133 Fee for 12 month 0
56-0134 Unused 0

56-0160 Unused 0

- 143 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Taiwan 77 79


56-0161 Pass Card 5 Renewal 0=No / 1= Yes 0
56-0162 Fee for 1 month 0-999999= 0-999999 yen 0
56-0163 Fee for 2 month 0
56-0164 Fee for 3 month 0
56-0165 Fee for 4 month 0
56-0166 Fee for 5 month 0
56-0167 Fee for 6 month 0
56-0168 Fee for 7 month 0
56-0169 Fee for 8 month 0
56-0170 Fee for 9 month 0
56-0171 Fee for 10 month 0
56-0172 Fee for 11 month 0
56-0173 Fee for 12 month 0
56-0174 Unused 0

56-0200 Unused 0
56-0201 Pass Card 6 Renewal 0=No / 1= Yes 0
56-0202 Fee for 1 month 0-999999= 0-999999 yen 0
56-0203 Fee for 2 month 0
56-0204 Fee for 3 month 0
56-0205 Fee for 4 month 0
56-0206 Fee for 5 month 0
56-0207 Fee for 6 month 0
56-0208 Fee for 7 month 0
56-0209 Fee for 8 month 0
56-0210 Fee for 9 month 0
56-0211 Fee for 10 month 0
56-0212 Fee for 11 month 0
56-0213 Fee for 12 month 0
56-0214 Unused 0

56-0240 Unused 0
56-0241 Pass Card 7 Renewal 0=No / 1= Yes 0
56-0242 Fee for 1 month 0-999999= 0-999999 yen 0
56-0243 Fee for 2 month 0
56-0244 Fee for 3 month 0
56-0245 Fee for 4 month 0
56-0246 Fee for 5 month 0
56-0247 Fee for 6 month 0
56-0248 Fee for 7 month 0
56-0249 Fee for 8 month 0
56-0250 Fee for 9 month 0
56-0251 Fee for 10 month 0
56-0252 Fee for 11 month 0
56-0253 Fee for 12 month 0
56-0254 Unused 0

56-0280 Unused 0
56-0281 Pass Card 8 Renewal 0=No / 1= Yes 0
56-0282 Fee for 1 month 0-999999= 0-999999 yen 0
56-0283 Fee for 2 month 0
56-0284 Fee for 3 month 0
56-0285 Fee for 4 month 0
56-0286 Fee for 5 month 0
56-0287 Fee for 6 month 0
56-0288 Fee for 7 month 0
56-0289 Fee for 8 month 0
56-0290 Fee for 9 month 0
56-0291 Fee for 10 month 0
56-0292 Fee for 11 month 0
56-0293 Fee for 12 month 0
56-0294 Unused 0

56-0320 Unused 0

- 144 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Taiwan 77 79


56-0321 Pass Card 9 Renewal 0=No / 1= Yes 0
56-0322 Fee for 1 month 0-999999= 0-999999 yen 0
56-0323 Fee for 2 month 0
56-0324 Fee for 3 month 0
56-0325 Fee for 4 month 0
56-0326 Fee for 5 month 0
56-0327 Fee for 6 month 0
56-0328 Fee for 7 month 0
56-0329 Fee for 8 month 0
56-0330 Fee for 9 month 0
56-0331 Fee for 10 month 0
56-0332 Fee for 11 month 0
56-0333 Fee for 12 month 0
56-0334 Unused 0

56-0360 Unused 0
56-0361 Pass Card 10 Renewal 0=No / 1= Yes 0
56-0362 Fee for 1 month 0-999999= 0-999999 yen 0
56-0363 Fee for 2 month 0
56-0364 Fee for 3 month 0
56-0365 Fee for 4 month 0
56-0366 Fee for 5 month 0
56-0367 Fee for 6 month 0
56-0368 Fee for 7 month 0
56-0369 Fee for 8 month 0
56-0370 Fee for 9 month 0
56-0371 Fee for 10 month 0
56-0372 Fee for 11 month 0
56-0373 Fee for 12 month 0
56-0374 Unused 0

56-0400 Unused 0
56-0401 Pass Card 11 Renewal 0=No / 1= Yes 0
56-0402 Fee for 1 month 0-999999= 0-999999 yen 0
56-0403 Fee for 2 month 0
56-0404 Fee for 3 month 0
56-0405 Fee for 4 month 0
56-0406 Fee for 5 month 0
56-0407 Fee for 6 month 0
56-0408 Fee for 7 month 0
56-0409 Fee for 8 month 0
56-0410 Fee for 9 month 0
56-0411 Fee for 10 month 0
56-0412 Fee for 11 month 0
56-0413 Fee for 12 month 0
56-0414 Unused 0

56-0440 Unused 0
56-0441 Pass Card 12 Renewal 0=No / 1= Yes 0
56-0442 Fee for 1 month 0-999999= 0-999999 yen 0
56-0443 Fee for 2 month 0
56-0444 Fee for 3 month 0
56-0445 Fee for 4 month 0
56-0446 Fee for 5 month 0
56-0447 Fee for 6 month 0
56-0448 Fee for 7 month 0
56-0449 Fee for 8 month 0
56-0450 Fee for 9 month 0
56-0451 Fee for 10 month 0
56-0452 Fee for 11 month 0
56-0453 Fee for 12 month 0
56-0454 Unused 0

56-0480 Unused 0

- 145 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Taiwan 77 79


56-0481 Pass Card 13 Renewal 0=No / 1= Yes 0
56-0482 Fee for 1 month 0-999999= 0-999999 yen 0
56-0483 Fee for 2 month 0
56-0484 Fee for 3 month 0
56-0485 Fee for 4 month 0
56-0486 Fee for 5 month 0
56-0487 Fee for 6 month 0
56-0488 Fee for 7 month 0
56-0489 Fee for 8 month 0
56-0490 Fee for 9 month 0
56-0491 Fee for 10 month 0
56-0492 Fee for 11 month 0
56-0493 Fee for 12 month 0
56-0494 Unused 0

56-0520 Unused 0
56-0521 Pass Card 14 Renewal 0=No / 1= Yes 0
56-0522 Fee for 1 month 0-999999= 0-999999 yen 0
56-0523 Fee for 2 month 0
56-0524 Fee for 3 month 0
56-0525 Fee for 4 month 0
56-0526 Fee for 5 month 0
56-0527 Fee for 6 month 0
56-0528 Fee for 7 month 0
56-0529 Fee for 8 month 0
56-0530 Fee for 9 month 0
56-0531 Fee for 10 month 0
56-0532 Fee for 11 month 0
56-0533 Fee for 12 month 0
56-0534 Unused 0

56-0560 Unused 0
56-0561 Pass Card 15 Renewal 0=No / 1= Yes 0
56-0562 Fee for 1 month 0-999999= 0-999999 yen 0
56-0563 Fee for 2 month 0
56-0564 Fee for 3 month 0
56-0565 Fee for 4 month 0
56-0566 Fee for 5 month 0
56-0567 Fee for 6 month 0
56-0568 Fee for 7 month 0
56-0569 Fee for 8 month 0
56-0570 Fee for 9 month 0
56-0571 Fee for 10 month 0
56-0572 Fee for 11 month 0
56-0573 Fee for 12 month 0
56-0574 Unused 0

56-0600 Unused 0

- 146 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-10. Nesting Setting


4-10-1. Nesting Basic Setting
Address Item Setting Range Default 77 79
80-0001 Nesting Grace Time for Pass Card 0-2400= 0:00-24:00 0
80-0002 Event Card 0
80-0003 Debit Card 0
80-0004 Ticket 0
80-0005 Pattern Switch Criterion Time 0= Paid Time 0
1= Processed Time
2= Paid Time or Processed Time
80-0006 Penalty Fee except Nesting Pattern 0= Calculate from Processed Time 0
1= Calculate from the Last Pattern End Time
80-0007 Reserved 0
80-0008 Reserved 0
80-0009 Reserved 0
80-0010 Reserved 0
80-0011 Pass Card Type 1 Nesting Operation [ Nesting Operation ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0012 Nesting Pattern [ Nesting Pattern ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0013 Pass Card Type 2 Nesting Operation 0
80-0014 Nesting Pattern 0
80-0015 Pass Card Type 3 Nesting Operation 0
80-0016 Nesting Pattern 0
80-0017 Pass Card Type 4 Nesting Operation 0
80-0018 Nesting Pattern 0
80-0019 Pass Card Type 5 Nesting Operation 0
80-0020 Nesting Pattern 0
80-0021 Pass Card Type 6 Nesting Operation 0
80-0022 Nesting Pattern 0
80-0023 Pass Card Type 7 Nesting Operation 0
80-0024 Nesting Pattern 0
80-0025 Pass Card Type 8 Nesting Operation 0
80-0026 Nesting Pattern 0
80-0027 Reserved 0

80-0040 Reserved 0
80-0041 Event Card Type 1 Nesting Operation [ Nesting Operation ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0042 Nesting Pattern [ Nesting Pattern ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0043 Event Card Type 2 Nesting Operation 0
80-0044 Nesting Pattern 0
80-0045 Event Card Type 3 Nesting Operation 0
80-0046 Nesting Pattern 0
80-0047 Event Card Type 4 Nesting Operation 0
80-0048 Nesting Pattern 0
80-0049 Event Card Type 5 Nesting Operation 0
80-0050 Nesting Pattern 0
80-0051 Event Card Type 6 Nesting Operation 0
80-0052 Nesting Pattern 0
80-0053 Event Card Type 7 Nesting Operation 0
80-0054 Nesting Pattern 0
80-0055 Event Card Type 8 Nesting Operation 0
80-0056 Nesting Pattern 0
80-0057 Reserved 0

80-0070 Reserved 0
80-0071 Debit Card Nesting Operation [ Nesting Operation ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0072 Nesting Pattern [ Nesting Pattern ] 0= No / 1-10= Nesting Pattern 1-10 0
80-0073 Reserved 0

80-0080 Reserved 0

- 147 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0081 Ticket Nesting Operation 0= No / 1= Yes 0
80-0082 Rate A Process within Grace Time 0= Not Accept / 1= Accept 0
80-0083 Rate B Process within Grace Time 0
80-0084 Rate C Process within Grace Time 0
80-0085 Rate D Process within Grace Time 0
80-0086 Rate E Process within Grace Time 0
80-0087 Rate F Process within Grace Time 0
80-0088 Rate G Process within Grace Time 0
80-0089 Rate H Process within Grace Time 0
80-0090 Rate I Process within Grace Time 0
80-0091 Rate J Process within Grace Time 0
80-0092 Rate K Process within Grace Time 0
80-0093 Rate L Process within Grace Time 0
80-0094 Reserved 0

80-0100 Reserved 0

- 148 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0101 Pattern 1 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0102 Reserved 0
80-0103 Status 0 Card Accept [ Card Accept ] 0
80-0104 Penalty Payment 0= No / 1= Yes 0
80-0105 Fee Rate (For Penalty Payment) 0
80-0106 Status after Payment [ Penalty Payment ] 0
80-0107 Status Change when Fee=0 0= No / 1= Yes 0
80-0108 Check Criterion Time 0
80-0109 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0110 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0111 Fee Rate (For Penalty Payment) 0
80-0112 Status after Payment [ Status after Payment ] 0
80-0113 Status Change when Fee=0 0-8= Status 0-8 0
80-0114 Check Criterion Time 0
80-0115 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0116 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0117 Fee Rate (For Penalty Payment) 0
80-0118 Status after Payment [ Check Criterion Time ] 0
80-0119 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0120 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0121 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0122 Penalty Payment 0
80-0123 Fee Rate (For Penalty Payment) 0
80-0124 Status after Payment 0
80-0125 Status Change when Fee=0 0
80-0126 Check Criterion Time 0
80-0127 Status 4 Card Accept 0
80-0128 Penalty Payment 0
80-0129 Fee Rate (For Penalty Payment) 0
80-0130 Status after Payment 0
80-0131 Status Change when Fee=0 0
80-0132 Check Criterion Time 0
80-0133 Status 5 Card Accept 0
80-0134 Penalty Payment 0
80-0135 Fee Rate (For Penalty Payment) 0
80-0136 Status after Payment 0
80-0137 Status Change when Fee=0 0
80-0138 Check Criterion Time 0
80-0139 Status 6 Card Accept 0
80-0140 Penalty Payment 0
80-0141 Fee Rate (For Penalty Payment) 0
80-0142 Status after Payment 0
80-0143 Status Change when Fee=0 0
80-0144 Check Criterion Time 0
80-0145 Status 7 Card Accept 0
80-0146 Penalty Payment 0
80-0147 Fee Rate (For Penalty Payment) 0
80-0148 Status after Payment 0
80-0149 Status Change when Fee=0 0
80-0150 Check Criterion Time 0
80-0151 Status 8 Card Accept 0
80-0152 Penalty Payment 0
80-0153 Fee Rate (For Penalty Payment) 0
80-0154 Status after Payment 0
80-0155 Status Change when Fee=0 0
80-0156 Check Criterion Time 0
80-0157 Reserved 0
80-0158 Reserved 0
80-0159 Reserved 0
80-0160 Reserved 0

- 149 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0161 Pattern 2 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0162 Reserved 0
80-0163 Status 0 Card Accept [ Card Accept ] 0
80-0164 Penalty Payment 0= No / 1= Yes 0
80-0165 Fee Rate (For Penalty Payment) 0
80-0166 Status after Payment [ Penalty Payment ] 0
80-0167 Status Change when Fee=0 0= No / 1= Yes 0
80-0168 Check Criterion Time 0
80-0169 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0170 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0171 Fee Rate (For Penalty Payment) 0
80-0172 Status after Payment [ Status after Payment ] 0
80-0173 Status Change when Fee=0 0-8= Status 0-8 0
80-0174 Check Criterion Time 0
80-0175 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0176 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0177 Fee Rate (For Penalty Payment) 0
80-0178 Status after Payment [ Check Criterion Time ] 0
80-0179 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0180 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0181 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0182 Penalty Payment 0
80-0183 Fee Rate (For Penalty Payment) 0
80-0184 Status after Payment 0
80-0185 Status Change when Fee=0 0
80-0186 Check Criterion Time 0
80-0187 Status 4 Card Accept 0
80-0188 Penalty Payment 0
80-0189 Fee Rate (For Penalty Payment) 0
80-0190 Status after Payment 0
80-0191 Status Change when Fee=0 0
80-0192 Check Criterion Time 0
80-0193 Status 5 Card Accept 0
80-0194 Penalty Payment 0
80-0195 Fee Rate (For Penalty Payment) 0
80-0196 Status after Payment 0
80-0197 Status Change when Fee=0 0
80-0198 Check Criterion Time 0
80-0199 Status 6 Card Accept 0
80-0200 Penalty Payment 0
80-0201 Fee Rate (For Penalty Payment) 0
80-0202 Status after Payment 0
80-0203 Status Change when Fee=0 0
80-0204 Check Criterion Time 0
80-0205 Status 7 Card Accept 0
80-0206 Penalty Payment 0
80-0207 Fee Rate (For Penalty Payment) 0
80-0208 Status after Payment 0
80-0209 Status Change when Fee=0 0
80-0210 Check Criterion Time 0
80-0211 Status 8 Card Accept 0
80-0212 Penalty Payment 0
80-0213 Fee Rate (For Penalty Payment) 0
80-0214 Status after Payment 0
80-0215 Status Change when Fee=0 0
80-0216 Check Criterion Time 0
80-0217 Reserved 0
80-0218 Reserved 0
80-0219 Reserved 0
80-0220 Reserved 0

- 150 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0221 Pattern 3 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0222 Reserved 0
80-0223 Status 0 Card Accept [ Card Accept ] 0
80-0224 Penalty Payment 0= No / 1= Yes 0
80-0225 Fee Rate (For Penalty Payment) 0
80-0226 Status after Payment [ Penalty Payment ] 0
80-0227 Status Change when Fee=0 0= No / 1= Yes 0
80-0228 Check Criterion Time 0
80-0229 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0230 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0231 Fee Rate (For Penalty Payment) 0
80-0232 Status after Payment [ Status after Payment ] 0
80-0233 Status Change when Fee=0 0-8= Status 0-8 0
80-0234 Check Criterion Time 0
80-0235 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0236 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0237 Fee Rate (For Penalty Payment) 0
80-0238 Status after Payment [ Check Criterion Time ] 0
80-0239 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0240 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0241 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0242 Penalty Payment 0
80-0243 Fee Rate (For Penalty Payment) 0
80-0244 Status after Payment 0
80-0245 Status Change when Fee=0 0
80-0246 Check Criterion Time 0
80-0247 Status 4 Card Accept 0
80-0248 Penalty Payment 0
80-0249 Fee Rate (For Penalty Payment) 0
80-0250 Status after Payment 0
80-0251 Status Change when Fee=0 0
80-0252 Check Criterion Time 0
80-0253 Status 5 Card Accept 0
80-0254 Penalty Payment 0
80-0255 Fee Rate (For Penalty Payment) 0
80-0256 Status after Payment 0
80-0257 Status Change when Fee=0 0
80-0258 Check Criterion Time 0
80-0259 Status 6 Card Accept 0
80-0260 Penalty Payment 0
80-0261 Fee Rate (For Penalty Payment) 0
80-0262 Status after Payment 0
80-0263 Status Change when Fee=0 0
80-0264 Check Criterion Time 0
80-0265 Status 7 Card Accept 0
80-0266 Penalty Payment 0
80-0267 Fee Rate (For Penalty Payment) 0
80-0268 Status after Payment 0
80-0269 Status Change when Fee=0 0
80-0270 Check Criterion Time 0
80-0271 Status 8 Card Accept 0
80-0272 Penalty Payment 0
80-0273 Fee Rate (For Penalty Payment) 0
80-0274 Status after Payment 0
80-0275 Status Change when Fee=0 0
80-0276 Check Criterion Time 0
80-0277 Reserved 0
80-0278 Reserved 0
80-0279 Reserved 0
80-0280 Reserved 0

- 151 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0281 Pattern 4 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0282 Reserved 0
80-0283 Status 0 Card Accept [ Card Accept ] 0
80-0284 Penalty Payment 0= No / 1= Yes 0
80-0285 Fee Rate (For Penalty Payment) 0
80-0286 Status after Payment [ Penalty Payment ] 0
80-0287 Status Change when Fee=0 0= No / 1= Yes 0
80-0288 Check Criterion Time 0
80-0289 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0290 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0291 Fee Rate (For Penalty Payment) 0
80-0292 Status after Payment [ Status after Payment ] 0
80-0293 Status Change when Fee=0 0-8= Status 0-8 0
80-0294 Check Criterion Time 0
80-0295 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0296 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0297 Fee Rate (For Penalty Payment) 0
80-0298 Status after Payment [ Check Criterion Time ] 0
80-0299 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0300 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0301 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0302 Penalty Payment 0
80-0303 Fee Rate (For Penalty Payment) 0
80-0304 Status after Payment 0
80-0305 Status Change when Fee=0 0
80-0306 Check Criterion Time 0
80-0307 Status 4 Card Accept 0
80-0308 Penalty Payment 0
80-0309 Fee Rate (For Penalty Payment) 0
80-0310 Status after Payment 0
80-0311 Status Change when Fee=0 0
80-0312 Check Criterion Time 0
80-0313 Status 5 Card Accept 0
80-0314 Penalty Payment 0
80-0315 Fee Rate (For Penalty Payment) 0
80-0316 Status after Payment 0
80-0317 Status Change when Fee=0 0
80-0318 Check Criterion Time 0
80-0319 Status 6 Card Accept 0
80-0320 Penalty Payment 0
80-0321 Fee Rate (For Penalty Payment) 0
80-0322 Status after Payment 0
80-0323 Status Change when Fee=0 0
80-0324 Check Criterion Time 0
80-0325 Status 7 Card Accept 0
80-0326 Penalty Payment 0
80-0327 Fee Rate (For Penalty Payment) 0
80-0328 Status after Payment 0
80-0329 Status Change when Fee=0 0
80-0330 Check Criterion Time 0
80-0331 Status 8 Card Accept 0
80-0332 Penalty Payment 0
80-0333 Fee Rate (For Penalty Payment) 0
80-0334 Status after Payment 0
80-0335 Status Change when Fee=0 0
80-0336 Check Criterion Time 0
80-0337 Reserved 0
80-0338 Reserved 0
80-0339 Reserved 0
80-0340 Reserved 0

- 152 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0341 Pattern 5 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0342 Reserved 0
80-0343 Status 0 Card Accept [ Card Accept ] 0
80-0344 Penalty Payment 0= No / 1= Yes 0
80-0345 Fee Rate (For Penalty Payment) 0
80-0346 Status after Payment [ Penalty Payment ] 0
80-0347 Status Change when Fee=0 0= No / 1= Yes 0
80-0348 Check Criterion Time 0
80-0349 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0350 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0351 Fee Rate (For Penalty Payment) 0
80-0352 Status after Payment [ Status after Payment ] 0
80-0353 Status Change when Fee=0 0-8= Status 0-8 0
80-0354 Check Criterion Time 0
80-0355 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0356 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0357 Fee Rate (For Penalty Payment) 0
80-0358 Status after Payment [ Check Criterion Time ] 0
80-0359 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0360 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0361 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0362 Penalty Payment 0
80-0363 Fee Rate (For Penalty Payment) 0
80-0364 Status after Payment 0
80-0365 Status Change when Fee=0 0
80-0366 Check Criterion Time 0
80-0367 Status 4 Card Accept 0
80-0368 Penalty Payment 0
80-0369 Fee Rate (For Penalty Payment) 0
80-0370 Status after Payment 0
80-0371 Status Change when Fee=0 0
80-0372 Check Criterion Time 0
80-0373 Status 5 Card Accept 0
80-0374 Penalty Payment 0
80-0375 Fee Rate (For Penalty Payment) 0
80-0376 Status after Payment 0
80-0377 Status Change when Fee=0 0
80-0378 Check Criterion Time 0
80-0379 Status 6 Card Accept 0
80-0380 Penalty Payment 0
80-0381 Fee Rate (For Penalty Payment) 0
80-0382 Status after Payment 0
80-0383 Status Change when Fee=0 0
80-0384 Check Criterion Time 0
80-0385 Status 7 Card Accept 0
80-0386 Penalty Payment 0
80-0387 Fee Rate (For Penalty Payment) 0
80-0388 Status after Payment 0
80-0389 Status Change when Fee=0 0
80-0390 Check Criterion Time 0
80-0391 Status 8 Card Accept 0
80-0392 Penalty Payment 0
80-0393 Fee Rate (For Penalty Payment) 0
80-0394 Status after Payment 0
80-0395 Status Change when Fee=0 0
80-0396 Check Criterion Time 0
80-0397 Reserved 0
80-0398 Reserved 0
80-0399 Reserved 0
80-0400 Reserved 0

- 153 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0401 Pattern 6 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0402 Reserved 0
80-0403 Status 0 Card Accept [ Card Accept ] 0
80-0404 Penalty Payment 0= No / 1= Yes 0
80-0405 Fee Rate (For Penalty Payment) 0
80-0406 Status after Payment [ Penalty Payment ] 0
80-0407 Status Change when Fee=0 0= No / 1= Yes 0
80-0408 Check Criterion Time 0
80-0409 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0410 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0411 Fee Rate (For Penalty Payment) 0
80-0412 Status after Payment [ Status after Payment ] 0
80-0413 Status Change when Fee=0 0-8= Status 0-8 0
80-0414 Check Criterion Time 0
80-0415 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0416 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0417 Fee Rate (For Penalty Payment) 0
80-0418 Status after Payment [ Check Criterion Time ] 0
80-0419 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0420 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0421 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0422 Penalty Payment 0
80-0423 Fee Rate (For Penalty Payment) 0
80-0424 Status after Payment 0
80-0425 Status Change when Fee=0 0
80-0426 Check Criterion Time 0
80-0427 Status 4 Card Accept 0
80-0428 Penalty Payment 0
80-0429 Fee Rate (For Penalty Payment) 0
80-0430 Status after Payment 0
80-0431 Status Change when Fee=0 0
80-0432 Check Criterion Time 0
80-0433 Status 5 Card Accept 0
80-0434 Penalty Payment 0
80-0435 Fee Rate (For Penalty Payment) 0
80-0436 Status after Payment 0
80-0437 Status Change when Fee=0 0
80-0438 Check Criterion Time 0
80-0439 Status 6 Card Accept 0
80-0440 Penalty Payment 0
80-0441 Fee Rate (For Penalty Payment) 0
80-0442 Status after Payment 0
80-0443 Status Change when Fee=0 0
80-0444 Check Criterion Time 0
80-0445 Status 7 Card Accept 0
80-0446 Penalty Payment 0
80-0447 Fee Rate (For Penalty Payment) 0
80-0448 Status after Payment 0
80-0449 Status Change when Fee=0 0
80-0450 Check Criterion Time 0
80-0451 Status 8 Card Accept 0
80-0452 Penalty Payment 0
80-0453 Fee Rate (For Penalty Payment) 0
80-0454 Status after Payment 0
80-0455 Status Change when Fee=0 0
80-0456 Check Criterion Time 0
80-0457 Reserved 0
80-0458 Reserved 0
80-0459 Reserved 0
80-0460 Reserved 0

- 154 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0461 Pattern 7 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0462 Reserved 0
80-0463 Status 0 Card Accept [ Card Accept ] 0
80-0464 Penalty Payment 0= No / 1= Yes 0
80-0465 Fee Rate (For Penalty Payment) 0
80-0466 Status after Payment [ Penalty Payment ] 0
80-0467 Status Change when Fee=0 0= No / 1= Yes 0
80-0468 Check Criterion Time 0
80-0469 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0470 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0471 Fee Rate (For Penalty Payment) 0
80-0472 Status after Payment [ Status after Payment ] 0
80-0473 Status Change when Fee=0 0-8= Status 0-8 0
80-0474 Check Criterion Time 0
80-0475 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0476 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0477 Fee Rate (For Penalty Payment) 0
80-0478 Status after Payment [ Check Criterion Time ] 0
80-0479 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0480 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0481 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0482 Penalty Payment 0
80-0483 Fee Rate (For Penalty Payment) 0
80-0484 Status after Payment 0
80-0485 Status Change when Fee=0 0
80-0486 Check Criterion Time 0
80-0487 Status 4 Card Accept 0
80-0488 Penalty Payment 0
80-0489 Fee Rate (For Penalty Payment) 0
80-0490 Status after Payment 0
80-0491 Status Change when Fee=0 0
80-0492 Check Criterion Time 0
80-0493 Status 5 Card Accept 0
80-0494 Penalty Payment 0
80-0495 Fee Rate (For Penalty Payment) 0
80-0496 Status after Payment 0
80-0497 Status Change when Fee=0 0
80-0498 Check Criterion Time 0
80-0499 Status 6 Card Accept 0
80-0500 Penalty Payment 0
80-0501 Fee Rate (For Penalty Payment) 0
80-0502 Status after Payment 0
80-0503 Status Change when Fee=0 0
80-0504 Check Criterion Time 0
80-0505 Status 7 Card Accept 0
80-0506 Penalty Payment 0
80-0507 Fee Rate (For Penalty Payment) 0
80-0508 Status after Payment 0
80-0509 Status Change when Fee=0 0
80-0510 Check Criterion Time 0
80-0511 Status 8 Card Accept 0
80-0512 Penalty Payment 0
80-0513 Fee Rate (For Penalty Payment) 0
80-0514 Status after Payment 0
80-0515 Status Change when Fee=0 0
80-0516 Check Criterion Time 0
80-0517 Reserved 0
80-0518 Reserved 0
80-0519 Reserved 0
80-0520 Reserved 0

- 155 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0521 Pattern 8 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0522 Reserved 0
80-0523 Status 0 Card Accept [ Card Accept ] 0
80-0524 Penalty Payment 0= No / 1= Yes 0
80-0525 Fee Rate (For Penalty Payment) 0
80-0526 Status after Payment [ Penalty Payment ] 0
80-0527 Status Change when Fee=0 0= No / 1= Yes 0
80-0528 Check Criterion Time 0
80-0529 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0530 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0531 Fee Rate (For Penalty Payment) 0
80-0532 Status after Payment [ Status after Payment ] 0
80-0533 Status Change when Fee=0 0-8= Status 0-8 0
80-0534 Check Criterion Time 0
80-0535 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0536 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0537 Fee Rate (For Penalty Payment) 0
80-0538 Status after Payment [ Check Criterion Time ] 0
80-0539 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0540 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0541 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0542 Penalty Payment 0
80-0543 Fee Rate (For Penalty Payment) 0
80-0544 Status after Payment 0
80-0545 Status Change when Fee=0 0
80-0546 Check Criterion Time 0
80-0547 Status 4 Card Accept 0
80-0548 Penalty Payment 0
80-0549 Fee Rate (For Penalty Payment) 0
80-0550 Status after Payment 0
80-0551 Status Change when Fee=0 0
80-0552 Check Criterion Time 0
80-0553 Status 5 Card Accept 0
80-0554 Penalty Payment 0
80-0555 Fee Rate (For Penalty Payment) 0
80-0556 Status after Payment 0
80-0557 Status Change when Fee=0 0
80-0558 Check Criterion Time 0
80-0559 Status 6 Card Accept 0
80-0560 Penalty Payment 0
80-0561 Fee Rate (For Penalty Payment) 0
80-0562 Status after Payment 0
80-0563 Status Change when Fee=0 0
80-0564 Check Criterion Time 0
80-0565 Status 7 Card Accept 0
80-0566 Penalty Payment 0
80-0567 Fee Rate (For Penalty Payment) 0
80-0568 Status after Payment 0
80-0569 Status Change when Fee=0 0
80-0570 Check Criterion Time 0
80-0571 Status 8 Card Accept 0
80-0572 Penalty Payment 0
80-0573 Fee Rate (For Penalty Payment) 0
80-0574 Status after Payment 0
80-0575 Status Change when Fee=0 0
80-0576 Check Criterion Time 0
80-0577 Reserved 0
80-0578 Reserved 0
80-0579 Reserved 0
80-0580 Reserved 0

- 156 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0581 Pattern 9 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0582 Reserved 0
80-0583 Status 0 Card Accept [ Card Accept ] 0
80-0584 Penalty Payment 0= No / 1= Yes 0
80-0585 Fee Rate (For Penalty Payment) 0
80-0586 Status after Payment [ Penalty Payment ] 0
80-0587 Status Change when Fee=0 0= No / 1= Yes 0
80-0588 Check Criterion Time 0
80-0589 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0590 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0591 Fee Rate (For Penalty Payment) 0
80-0592 Status after Payment [ Status after Payment ] 0
80-0593 Status Change when Fee=0 0-8= Status 0-8 0
80-0594 Check Criterion Time 0
80-0595 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0596 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0597 Fee Rate (For Penalty Payment) 0
80-0598 Status after Payment [ Check Criterion Time ] 0
80-0599 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0600 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0601 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0602 Penalty Payment 0
80-0603 Fee Rate (For Penalty Payment) 0
80-0604 Status after Payment 0
80-0605 Status Change when Fee=0 0
80-0606 Check Criterion Time 0
80-0607 Status 4 Card Accept 0
80-0608 Penalty Payment 0
80-0609 Fee Rate (For Penalty Payment) 0
80-0610 Status after Payment 0
80-0611 Status Change when Fee=0 0
80-0612 Check Criterion Time 0
80-0613 Status 5 Card Accept 0
80-0614 Penalty Payment 0
80-0615 Fee Rate (For Penalty Payment) 0
80-0616 Status after Payment 0
80-0617 Status Change when Fee=0 0
80-0618 Check Criterion Time 0
80-0619 Status 6 Card Accept 0
80-0620 Penalty Payment 0
80-0621 Fee Rate (For Penalty Payment) 0
80-0622 Status after Payment 0
80-0623 Status Change when Fee=0 0
80-0624 Check Criterion Time 0
80-0625 Status 7 Card Accept 0
80-0626 Penalty Payment 0
80-0627 Fee Rate (For Penalty Payment) 0
80-0628 Status after Payment 0
80-0629 Status Change when Fee=0 0
80-0630 Check Criterion Time 0
80-0631 Status 8 Card Accept 0
80-0632 Penalty Payment 0
80-0633 Fee Rate (For Penalty Payment) 0
80-0634 Status after Payment 0
80-0635 Status Change when Fee=0 0
80-0636 Check Criterion Time 0
80-0637 Reserved 0
80-0638 Reserved 0
80-0639 Reserved 0
80-0640 Reserved 0

- 157 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0641 Pattern 10 Fee Rate (For No Penalty Payment) 0= A Rate / 1-12= A-L Rate 0
80-0642 Reserved 0
80-0643 Status 0 Card Accept [ Card Accept ] 0
80-0644 Penalty Payment 0= No / 1= Yes 0
80-0645 Fee Rate (For Penalty Payment) 0
80-0646 Status after Payment [ Penalty Payment ] 0
80-0647 Status Change when Fee=0 0= No / 1= Yes 0
80-0648 Check Criterion Time 0
80-0649 Status 1 Card Accept [ Fee Rate (For Penalty Payment) ] 0
80-0650 Penalty Payment 0= A Rate / 1-12= A-L Rate 0
80-0651 Fee Rate (For Penalty Payment) 0
80-0652 Status after Payment [ Status after Payment ] 0
80-0653 Status Change when Fee=0 0-8= Status 0-8 0
80-0654 Check Criterion Time 0
80-0655 Status 2 Card Accept [ Status Change when Fee=0 ] 0
80-0656 Penalty Payment 0= No Status Change / 1= Status Change 0
80-0657 Fee Rate (For Penalty Payment) 0
80-0658 Status after Payment [ Check Criterion Time ] 0
80-0659 Status Change when Fee=0 0= Process Date and Time / 1= Entry Date and Time 0
80-0660 Check Criterion Time (This is for Mifare Pass Card and Mag/Mifare Debit Card) 0
80-0661 Status 3 Card Accept (This setting is applied for paid time write area also) 0
80-0662 Penalty Payment 0
80-0663 Fee Rate (For Penalty Payment) 0
80-0664 Status after Payment 0
80-0665 Status Change when Fee=0 0
80-0666 Check Criterion Time 0
80-0667 Status 4 Card Accept 0
80-0668 Penalty Payment 0
80-0669 Fee Rate (For Penalty Payment) 0
80-0670 Status after Payment 0
80-0671 Status Change when Fee=0 0
80-0672 Check Criterion Time 0
80-0673 Status 5 Card Accept 0
80-0674 Penalty Payment 0
80-0675 Fee Rate (For Penalty Payment) 0
80-0676 Status after Payment 0
80-0677 Status Change when Fee=0 0
80-0678 Check Criterion Time 0
80-0679 Status 6 Card Accept 0
80-0680 Penalty Payment 0
80-0681 Fee Rate (For Penalty Payment) 0
80-0682 Status after Payment 0
80-0683 Status Change when Fee=0 0
80-0684 Check Criterion Time 0
80-0685 Status 7 Card Accept 0
80-0686 Penalty Payment 0
80-0687 Fee Rate (For Penalty Payment) 0
80-0688 Status after Payment 0
80-0689 Status Change when Fee=0 0
80-0690 Check Criterion Time 0
80-0691 Status 8 Card Accept 0
80-0692 Penalty Payment 0
80-0693 Fee Rate (For Penalty Payment) 0
80-0694 Status after Payment 0
80-0695 Status Change when Fee=0 0
80-0696 Check Criterion Time 0
80-0697 Reserved 0
80-0698 Reserved 0
80-0699 Reserved 0
80-0700 Reserved 0

- 158 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-10-2. Nesting Area Pattern Setting


Address Item Setting Range Default 77 79
80-0701 Monday Pattern Switch [ Pattern Switch ] 0
80-0702 Pattern Switch Start Time 0= No Pattern Switch / 1= Use Pattern Switch 0
80-0703 Pattern Switch End Time 0
80-0704 Tuesday Pattern Switch [ Start Time / End time ] 0
80-0705 Pattern Switch Start Time 000-2359= 0:00-23:59 0
80-0706 Pattern Switch End Time (if Start Time = End Time = 000, 24h.) 0
80-0707 Wednesday Pattern Switch 0
80-0708 Pattern Switch Start Time Ex 1; 0
80-0709 Pattern Switch End Time Special Period 1= 1/Oct. - 3/Oct. 0
80-0710 Thursday Pattern Switch Start / End Time = 10:00 - 17:00 0
80-0711 Pattern Switch Start Time In this case pattern switch period is as follows. 0
80-0712 Pattern Switch End Time - 1/Oct. 10:00 - 16:59 0
80-0713 Friday Pattern Switch - 2/Oct. 10:00 - 16:59 0
80-0714 Pattern Switch Start Time - 3/Oct. 10:00 - 16:59 0
80-0715 Pattern Switch End Time 0
80-0716 Saturday Pattern Switch Ex 2; 0
80-0717 Pattern Switch Start Time Start Time (22:00) > End Time (8:00), 0
80-0718 Pattern Switch End Time In this case pattern switch period is as follows. 0
80-0719 Sunday Pattern Switch Monday 22:00 - Tuesday 7:59 0
80-0720 Pattern Switch Start Time 0
80-0721 Pattern Switch End Time 0
80-0722 Special Date Pattern Switch 0
80-0723 Pattern Switch Start Time 0
80-0724 Pattern Switch End Time 0
80-0725 Special Period 1 Pattern Switch 0
80-0726 Pattern Switch Start Time 0
80-0727 Pattern Switch End Time 0
80-0728 Special Period 2 Pattern Switch 0
80-0729 Pattern Switch Start Time 0
80-0730 Pattern Switch End Time 0
80-0731 Special Period 3 Pattern Switch 0
80-0732 Pattern Switch Start Time 0
80-0733 Pattern Switch End Time 0
80-0734 Reserved 0

80-0740 Reserved 0
80-0741 Special Period 1 Start Month [Month] 1-12= JAN-DEC 0
80-0742 Start Date [Date] 1-31= 1-31 day 0
80-0743 End Month 0
80-0744 End Date (Special Period is prior to the Special Day) 0
80-0745 Special Period 2 Start Month 0
80-0746 Start Date 0
80-0747 End Month 0
80-0748 End Date 0
80-0749 Special Period 3 Start Month 0
80-0750 Start Date 0
80-0751 End Month 0
80-0752 End Date 0

- 159 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0753 Special Date 1 Month [Month] 1-12= JAN-DEC 0
80-0754 Date [Date] 1-31= 1-31 day 0
80-0755 Special Date 2 Month 0
80-0756 Date 0
80-0757 Special Date 3 Month 0
80-0758 Date 0
80-0759 Special Date 4 Month 0
80-0760 Date 0
80-0761 Special Date 5 Month 0
80-0762 Date 0
80-0763 Special Date 6 Month 0
80-0764 Date 0
80-0765 Special Date 7 Month 0
80-0766 Date 0
80-0767 Special Date 8 Month 0
80-0768 Date 0
80-0769 Special Date 9 Month 0
80-0770 Date 0
80-0771 Special Date 10 Month 0
80-0772 Date 0
80-0773 Special Date 11 Month 0
80-0774 Date 0
80-0775 Special Date 12 Month 0
80-0776 Date 0
80-0777 Special Date 13 Month 0
80-0778 Date 0
80-0779 Special Date 14 Month 0
80-0780 Date 0
80-0781 Special Date 15 Month 0
80-0782 Date 0
80-0783 Special Date 16 Month 0
80-0784 Date 0
80-0785 Special Date 17 Month 0
80-0786 Date 0
80-0787 Special Date 18 Month 0
80-0788 Date 0
80-0789 Special Date 19 Month 0
80-0790 Date 0
80-0791 Special Date 20 Month 0
80-0792 Date 0
80-0793 Special Date 21 Month 0
80-0794 Date 0
80-0795 Special Date 22 Month 0
80-0796 Date 0
80-0797 Special Date 23 Month 0
80-0798 Date 0
80-0799 Special Date 24 Month 0
80-0800 Date 0
80-0801 Special Date 25 Month 0
80-0802 Date 0
80-0803 Special Date 26 Month 0
80-0804 Date 0
80-0805 Special Date 27 Month 0
80-0806 Date 0
80-0807 Special Date 28 Month 0
80-0808 Date 0
80-0809 Special Date 29 Month 0
80-0810 Date 0
80-0811 Special Date 30 Month 0
80-0812 Date 0
80-0813 Special Date 31 Month 0
80-0814 Date 0
80-0815 Reserved 0

80-0820 Reserved 0

- 160 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Address Item Setting Range Default 77 79


80-0821 APS Data 0= Send Pass Card Additional Fee and Nesting Penalty 0
Fee Together
1= Send Pass Card Additional Fee and Nesting Penalty
Fee Separately
80-0822 Additional Fee Charge 0= Nesting Penalty Fee Only 0
1= Pass Card Additional Fee Only
2= Pass Card Additional Fee and Nesting Penalty Fee
Together
80-0823 Discount 0= Discount Nesting Penalty Fee Only 0
1= Discount Pass Card Additional Fee Only
2= Discount Pass Card Additional Fee and Nesting
Penalty Fee Together
80-0824 Reserved 0

80-0850 Reserved 0

- 161 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-11. Currency Setting (related to 41-0002)


Value Currency Decimal point Fee unit (1) Denomination1 (2) Denomination2 (3)
21000 Dollar 2 $1.50 $1 50¢
20100 2 $1.50 $1 $0.50
21001 Euro 2 €1.50 €1 50¢
21002 Pound 2 £1.50 £1 50p
20103 Ringgit (Malaysia) 2 RM1.50 RM1 RM0.50
00004 Won (Korea) No ₩150 - -
00005 Yen (Japan) No ¥150 - -
00006 Yuan (China No ¥150 - -
00007 Bhat (Thailand) No B150 - -
21008 Peso (Mexico) 2 N$1.50 N$1 50¢
20108 2 N$1.50 N$1 N$0.50
20109 Nuevo Sol (Peru) 2 S/.1.50 S/.1 S/.0.50
20110 Real (Brazil) 2 R$1.50 R$1 R$0.50
00011 Bolivar (Venezuela) No BS150 - -
21012 Dollar (Canada) 2 C$1.50 C$1 50¢
20112 2 C$1.50 C$1 C$0.50
21013 Dollar (USA) 2 US$1.50 US$1 50¢
20113 2 US$1.50 US$1 US$0.50
00014 Dollar (Taiwan) No $150 - -
23115 Kroon (Estonia) 2 1.50EEK 1EEK 0.50EEK
23116 Lev (Bulgaria) 2 1.50Lv 1Lv 0.50Lv
23117 Convertible Marka (Bosnia and Herzegovina) 2 1.50KM 1KM 0.50KM
23118 Kuna (Croatia) 2 1.50kn 1kn 0.50kn
23119 Koruna (Czech Republic) 2 1.50Kc 1Kc 0.50Kc
23120 Koruna (Slovakia) 2 1.50Sk 1Sk 0.50Sk
23121 Forint (Hungary) 2 1.50Ft 1Ft 0.50Ft
23122 Lat (Latvia) 2 1.50Ls 1Ls 0.50Ls
23123 Litas (Lithuania) 2 1.50Lt 1Lt 0.50Lt
23124 Denar (Macedonia) 2 1.50MKD 1MKD 0.50MKD
23125 Zloty (Poland) 2 1.50zl 1zl 0.50zl
23126 Leu (Romania) 2 1.50Lei 1Lei 0.50Lei
23127 Ruble (Russia) 2 1.50Rub 1Rub 0.50Rub
23128 Tolar (Slovenia) 2 1.50SIT 1SIT 0.50SIT
23129 Hryvnia (Ukraine) 2 1.50Hrv 1Hrv 0.50Hrv
23130 Krone (Denmark, Norway) 2 1.50kr 1kr 0.50kr
23131 Krona (Sweden) 2 1.50kr 1kr 0.50kr
20132 Pound (Cyprus) 2 £C1.50 £C1 £C0.50
20133 Liri (Malta) 2 Lm1.50 Lm1 Lm0.50
20134 Franc (Switzerland) 2 SF1.50 SF1 SF0.50
23135 Lira (Turkey) 2 1.50YTL 1YTL 0.50YTL
21036 Dirham (UAE) 2 Dhs1.50 Dhs1 50fils
31037 Dinar (Bahrain) 3 BD1.500 BD1 500fils
31038 Dinar (Kuwait) 3 KD1.500 KD1 500fils
23139 Rial (Oman) 2 1.50RO 1RO 0.50RO
23140 Rial (Qatar) 2 1.50QR 1QR 0.50QR
23141 Rial (Saudi Arabia) 2 1.50SRL 1SRL 0.50SRL
20142 Pound (Lebanon) 2 L£1.50 L£1 L£0.50
33143 Pound (Egypt) 3 1.500£E 1£E 0.500£E
20144 Naira (Nigeria) 2 NGN1.50 NGN1 NGN0.50
20145 Rand (South Africa) 2 R1.50 R1 R0.50
20146 Rupee (India 2 Rs.1.50 Rs.1 Rs.0.50
20147 Pataka (Macau) 2 MOP1.50 MOP1 MOP0.50
21048 Dollar (Hong Kong) 2 HK$1.50 HK$1 50¢
20148 2 HK$1.50 HK$1 HK$0.50
00049 Peso (Chile) None $150 - -
20198 * (with decimal point) 2 *1.50 *1 *0.50
00098 * No *150 - -
20199 No symbol (with decimal point) 2 1.50 1 0.50
00099 No symbol No 150 - -

- 162 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

6th digit: Decimal point and separator setting


Decimal point: 0,2,4=period (“.”) / 1,3,5=comma (“,”)
Separator: 0=comma (“,”) / 1=period (“.”) / 2,3=space / 4,5= no separator
(Example) Value Result
0xxxxx 1,234.56
1xxxxx 1.234,56
2xxxxx 1 234.56
3xxxxx 1 234,56
4xxxxx 1234.56
5xxxxx 1234,56
5th digit: Decimal point position
4th digit: Currency symbol position
(0=front / 1=(1)(2) is front, (3) is behind / 2=(1)(2) is behind, (3) is front / 3=behind)
3rd digit: Display method for the denomination after the decimal point (3)
(0=no decimal point / 1=with decimal point)
1-2 digit: Currency symbol

- 163 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-12. Banknote Type Table (related to 41-0014 - 41-0017)


Country No. Note Cash Code Money Controls Sodeco
Euro 1 €5 Type -1 Type -1 Type -3
2 €10 Type -2 Type -2 Type -4
3 €20 Type -3 Type -3 Type -5
4 €50 Type -4 Type -4 Type -7
UK 1 £5 Type -1 Type -1 Type -3
2 £10 Type -2 Type -2 Type -4
3 £20 Type -3 Type -3 Type -5
4 £50 - - Type -7
Korea 1 W1000 Type -1 Type -1 Type -11
2 W5000 Type -2 Type -2 Type -13
3 W10000 Type -3 Type -3 Type -14
4 - - - -
Taiwan 1 100 圓 Type -1 N/A Type -8
2 200 圓 Type -2 N/A Type -9
3 500 圓 Type -3 N/A Type -10
4 1000 圓 Type -4 N/A Type -11
China 1 10 元 TBD Type -4 Type -4
2 20 元 TBD Type -7 Type -5
3 50 元 TBD Type -5 Type -7
4 100 元 TBD Type -6 Type -8
Malaysia 1 RM1 Type -1 Type -1 Type -1
2 RM2 Type -2 Type -2 Type -2
3 RM5 Type -3 Type -3 Type -3
4 RM10 Type -4 Type -4 Type -4
Australia 1 $5 Type -3 Type -1 Type -3
2 $10 Type -4 Type -2 Type -4
3 $20 Type -5 Type -3 Type -5
4 $50 Type -6 Type -4 Type -7
New Zealand 1 $5 Type -3 N/A Type -3
2 $10 Type -4 N/A Type -4
3 $20 Type -5 N/A Type -5
4 $50 Type -6 N/A Type -7
U.S.A. 1 $1 Type -1 Type -1 Type -1
2 $5 Type -3 Type -2 Type -3
3 $10 Type -4 Type -3 Type -4
4 $20 Type -5 Type -4 Type -5
Canada 1 $5 Type -11 N/A N/A
2 $10 Type -12 N/A N/A
3 $20 Type -13 N/A N/A
4 - - - -
Venezuela 1 Bs. 1000 Type -1 N/A N/A
2 Bs. 5000 Type -3 N/A N/A
3 Bs. 10000 Type -4 N/A N/A
4 Bs. 20000 Type -5 N/A N/A
Chile 1 $1000 Type -2 N/A N/A
2 $2000 Type -3 N/A N/A
3 $5000 Type -4 N/A N/A
4 $10000 Type -5 N/A N/A
Japan 1 ¥1,000 Type -1 Type -1 Type -11
2 ¥2,000 Type -2 Type -2 Type -12
3 ¥5,000 Type -3 Type -3 Type -13
4 ¥10,000 Type -4 Type -4 Type -14

- 164 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-13. Coin Point Table (related to 24-0001 - 24-0026)


Country No. Coin Point Diameter Thickness
Euro 1 5¢ 12 φ21.25 t1.67
2 10¢ 12 φ19.75 t1.93
3 20¢ 17 φ22.25 t2.14
4 50¢ 22 φ24.25 t2.38
5 €1 20 φ23.25 t2.33
6 €1 23 φ25.75 t2.20
UK 1 5p 9 φ17.99 t1.74
2 10p 18 φ24.46 t1.83
3 20p 13 φ21.37 t1.82
4 50p 22 φ27.27 t1.82
5 £1 26 φ22.55 t3.19
6 £2 32 φ28.41 t2.50
Korea 1 W10 13 φ22.86 t1.53
2 W50 12 φ21.57 t1.58
3 W100 15 φ24.00 t1.64
4 W500 22 φ26.52 t1.92
Taiwan 1 5圓 12 φ21.97 t1.59
2 10 圓 19 φ25.95 t1.77
3 20 圓 23 φ26.88 t2.01
4 50 圓 30 φ27.97 t2.42
China 1 1元 7 φ18.00 t1.37
Malaysia 1 10s 9 φ19.34 t1.40
2 20s 16 φ23.54 t1.78
3 50s 25 φ27.75 t2.04
4 RM1 25 φ24.55 t2.64
Australia 1 10¢ 16 φ23.50 t1.77
2 20¢ 30 φ28.50 t2.34
3 50¢ 41 φ32.50 t2.44
4 $1 26 φ24.93 t2.69
5 $2 19 φ20.44 t2.91
New Zealand 1 5¢ 8 φ19.43 t1.25
2 10¢ 15 φ23.62 t1.70
3 20¢ 29 φ28.58 t2.23
4 50¢ 37 φ31.75 t2.34
5 $1 23 φ23.00 t2.74
6 $2 30 φ26.50 t2.70
U.S.A. 1 5¢ 14 φ21.21 t1.95
2 10¢ 7 φ17.91 t1.35
3 25¢ 17 φ24.26 t1.75
4 50¢ 32 φ30.61 t2.15
5 $1 22 φ26.50 t2.00
Canada 1 5¢ 13 φ21.19 t1.79
2 10¢ 7 φ18.00 t1.26
3 25¢ 14 φ23.83 t1.58
4 50¢ 23 φ27.15 t1.96
5 $1 21 φ26.51 t1.90
6 $2 22 φ27.95 t1.74
Venezuela 1 Bs. 50 21 φ23.00 t2.35
2 Bs. 100 21 φ25.00 t2.11
3 Bs. 500 27 φ28.50 t2.11
Chile 1 $10 10 φ21.00 t1.45
2 $50 20 φ25.00 t1.95
3 $100 24 φ27.00 t2.05
4 New $10 18 φ23.50 t2.00
5 $500 18 φ26.00 t2.00
Japan 1 ¥10 13 φ23.50 t1.50
2 ¥50 12 φ21.00 t1.75
3 ¥100 14 φ22.60 t1.70
4 ¥500 20 φ26.50 t1.80

- 165 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-14. Voice Announcement Logic for the Fee (related to 41-0003)


Logic No. Pattern
1 English with decimal point
2 English without decimal point
3 Japanese without decimal point
4 Japanese with decimal point
5 Korean
6 French or Dutch with decimal point (“1” is not announced for “100”, ”1000”, and ”100000”)
7 French or Dutch without decimal point (“1” is not Announce for “100”, ”1000”, and ”100000”)
8 Spanish with decimal point
(“1” is not announced for ”1000”, 100-900 is single word, 100-199 is single word but different from “100”.)
9 Spanish without decimal point
(“1” is not announced for ”1000”, 100-900 is single word, 100-199 is single word but different from “100”.)

- 166 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

4-15. Parameter List that Reboot or Initialize 2 is required


There are several parameters that if they were changed the reboot or initialize 2 is required. The following table shows these parameters.
a. Parameters that is required the reboot
Address Item
04-xxxx Communication setting
22-xxxx Printing related setting
23-0002 Door vibration sensor
23-0004 (reserved)
23-0010 (reserved)
23-0016 (reserved)
23-0022 (reserved)
23-0023 In operation / Out of operation selection when no coin change is available
23-0025 In / Out of operation when no banknote change is available
23-0040 (reserved)
23-0041 With/without bank note dispenser
25-0001 Money management mode
25-0008 When out of change sensor is activated (hopper 1)
25-0014 When out of change sensor is activated (hopper 2)
25-0020 When out of change sensor is activated (hopper 3)
25-0026 When out of change sensor is activated (hopper 4)
25-0042 Note dispenser 1 when out of change sensor is activated
25-0046 Note dispenser 2 when out of change sensor is activated
25-0050 Note dispenser 3 when out of change sensor is activated
25-0054 Unused
26-xxxx output signal setting
27-xxxx Input signal setting
31-xxxx Information record setting
38-0001 Credit card terminal connection
38-0005 Credit card data receiving timer )
38-0011 Credit card server port number
38-0012 Credit card server IP address (1)
38-0013 Credit card server IP address (2)
38-0014 Credit card server IP address (3)
38-0015 Credit card server IP address (4)
38-0016 Credit card payment number of connection retry
38-0017 Credit server connection timer
38-0018 Credit card payment : number of packet sending retry
38-0019 Credit card payment : packet watch timer
38-0020 Credit card payment : Receiving result watch timer
38-0021 Ethernet initial setting
38-0022 DHCP usage
38-0023 Own port number
38-0024 Own IP address (1)
38-0025 Own IP address (2)
38-0026 Own IP address (3)
38-0027 Own IP address (4)
38-0028 Subnet mask
38-0029 Default gateway IP address (1)
38-0030 Default gateway IP address (2)
38-0031 Default gateway IP address (3)
38-0032 Default gateway IP address (4)
38-0040 Credit Card payment for pass card renewal
38-0041 Credit Card In/Out
41-0004 Primary language
41-0005 2nd language
41-0006 3rd language
41-0011 Journal printer type
41-0012 Banknote reader type
41-0013 Banknote dispenser type
41-0014 Banknote type for banknote 1
41-0015 Banknote type for banknote 2
41-0016 Banknote type for banknote 3
41-0017 Banknote type for banknote 4
41-0027 Coin reader type
41-0028 Number of coins for consecutive dispensing
41-0033 Paystation type
41-0035 With/without communication module
41-0063 Pay-in-Advance Type (ver.05)

- 167 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(continued)
Address Item
42-0001 Transportation Card Payment
42-0005 Data receiving timer (TEXT)
42-0011 Transportation Card server port number
42-0012 Transportation Card server IP address (1)
42-0013 Transportation Card server IP address (2)
42-0014 Transportation Card server IP address (3)
42-0015 Transportation Card server IP address (4)
42-0016 Number of connection retry
42-0017 Connection watchdog timer
42-0018 Number of packet sending retry
42-0019 Packet watchdog timer
42-0020 Receiving result watchdog timer (ARCNET)
42-0021 Ethernet initial setting
42-0022 DHCP usage
42-0023 Own port number
42-0024 Own IP address (1)
42-0025 Own IP address (2)
42-0026 Own IP address (3)
42-0027 Own IP address (4)
42-0028 Subnet mask
42-0029 Default gateway IP address (1)
42-0030 Default gateway IP address (2)
42-0031 Default gateway IP address (3)
42-0032 Default gateway IP address (4)
42-0045 Card reader type
42-0061 Pay-in -Advance enable/disable
42-0063 Pay-in -Advance Type
42-0101 Proton Card Payment
42-0149 Journal record
43-0001 Online server connection
43-0002 Data receiving timer (inquiry)
43-0003 Data receiving timer (maintenance)
43-0006 Online server port number
43-0007 Online card server IP address (1)
43-0008 Online card server IP address (2)
43-0009 Online card server IP address (3)
43-0010 Online card server IP address (4)
43-0011 Number of connection retry
43-0012 Connection watchdog timer
43-0013 Connection send interval timer
43-0014 Number of packet sending retry
43-0015 Packet watchdog timer
43-0016 Number of packet sending retry end decision
43-0017 Receiving result watchdog timer (ARCNET)
43-0018 Send data when buffer is full
43-0019 Resend data interval timer
43-0020 Ethernet default setting
43-0021 DHCP usage
43-0022 Own port number
43-0023 Own IP address (1)
43-0024 Own IP address (2)
43-0025 Own IP address (3)
43-0026 Own IP address (4)
43-0027 Subnet mask
43-0028 Default gateway IP address (1)
43-0029 Default gateway IP address (2)
43-0030 Default gateway IP address (3)
43-0031 Default gateway IP address (4)

- 168 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

b. Parameters that is required the initialize 2


Address Item
07-0462 Maximum pass card number
20-xxxx Category total related
24-0001 Hopper 1 denomination
24-0002 Hopper 2 denomination
24-0003 Hopper 3 denomination
24-0004 Hopper 4 denomination
24-0007 The read coin 1 denomination
24-0008 The read coin 2 denomination
24-0009 The read coin 3 denomination
24-0010 The read coin 4 denomination
24-0011 The read coin 5 denomination
24-0012 The read coin 6 denomination
24-0013 The read note 1 denomination
24-0014 The read note 2 denomination
24-0015 The read note 3 denomination
24-0016 The read note 4 denomination
24-0017 Banknote dispenser Note 1 denomination
24-0018 Banknote dispenser Note 2 denomination
24-0019 Banknote dispenser Note 3 denomination
24-0020 Hopper function for 6 coin reading
41-0010 Magnetic reader type
41-0144 Initial charge (sale)/recharge function
41-0185 Use IBK Storage Memory
41-0186 Usage of IBK Storage Memory

c. Parameters that is required power OFF/ON


Address Item
38-0001 Credit card terminal connection
41-0010 Magnetic reader type
41-0011 Journal printer type
41-0012 Banknote reader type
41-0013 Banknote dispenser type
41-0027 Coin reader type
41-0033 Paystation type
41-0035 Communication module
43-0001 Online server connection
42-0101 Proton Card Payment (AEE only)
36-0001 Remote control (AKC only)
42-0001 Transportation card payment (AKC only)
42-0045 Reader type (AKC only)
42-0001 Receipt printer type (AIT only)
43-0151 Barcode discount (AKC only)

- 169 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

5. Parameter Explanation
5-1. Specific Parameter
(Terminal specific parameter)
01-0001 Terminal no. (valid only for slave terminal)
This is the terminal address setting for APS communication.
1-50, 0= Standalone or master terminal

01-0002 Machine No.


When several same type equipments are existing in a parking lot, this parameter is used to specify the
equipment.
If only one equipment, No.1. The set value is printed on the receipt or total print and so on.

01-0003 Right/Left exclusive control


This parameter is set in case of EPS, and 2 paystations are installed on 1 exit lane. When one of them
is working, the other one is disabled or still possible to accept the ticket.
If 01-0005=0, this parameter is invalid.

(Equipment adjustment data)


02-0003 Panel backlight adjustment
To adjust the backlight brightness. If it is adjusted in “Operator Operation” mode, this parameter value
is also changed.

02-0004 Voice announcement volume 1


To adjust the voice announcement volume 1. If it is adjusted in “Operator Operation” mode, this
parameter value is also changed.

02-0005 Voice announcement volume 2


To adjust the voice announcement volume 2. If it is adjusted in “Operator Operation” mode, this
parameter value is also changed.

02-0006 Door alarm volume


To adjust the door alarm volume. If it is adjusted in “Operator Operation” mode, this parameter value is
also changed.

- 170 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

5-2. Common Parameter


(System setting)
01-0011 Sequential number
Individual sequential number: the individual serial number is applied each for the payment record, total
record, sub total record and so on.
Consecutive sequential number: Regardless of the items, sequential number is applied sequentially.

(Rate setting)
05-0005-0015 Applied rate system for A rate
To specify the applied rate system for A rate on each day.
The date change timing is 1st rate zone start time.

(Parking ticket setting)


06-0002 Invalid parking ticket check
In case the parking ticket was issued and at that time LC2 was not ON, this function refuses to accept
that ticket (= back out ticket (ghost ticket)).

06-0005 Payment cancelled ticket format


When the payment transaction is cancelled after the service ticket etc. is inserted, the ticket is
re-encoded for the cancelled payment ticket. This parameter selects the cancelled payment ticket data
format.
0= Old magnetic system compatible format
1= All discount supported ticket
Normally this setting should be 0.

(Pass card setting)


07-0002 Pass card “n” min. check
This parameter specifies the same pass card unusable time.
For example if 07-0002=3, the consecutive usage of the same pass card is refused within 3 minutes.
But if the other pass card is used within 3 minutes, it is accepted.

07-0006 Pass card renewal calculation method


This parameter specified the calculation method of the renewal pass card expiration date.
0= Expiration date + 1day + (number of month - 1day)
1= Expiration date + number of month (pass card start date is not changed.)

Ex.)
- Valid period: 1/Apr./2004 - 30/Apr./2004
- Renewal period (specified in 07-0017): 1 month
- Renewal possible period (specified in 07-0004 and 07-0005): 10 days before and after the
expiration date

Renewed at 29/Apr. (before expiration date)


(1) 0= Expiration date + 1day + (number of month - 1day)
- Renewed pass card valid period start date: 1/Apr./2004 (same as before)
- Renewed pass card expiration date: 30/Apr./2004 + 1day + (1month - 1day)
= 1/May/2004 + 1month - 1day
= 1/Jun./2004 - 1day = 31/May/2004
(2) 1= Expiration date + number of month
- Renewed pass card valid period start date: 1/Apr./2004 (same as before)
- Renewed pass card expiration date: 30/Apr./2004 + 1month= 30/May/2004

- 171 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Renewed at 5/May. (after expiration date)


(3) 0= Expiration date + 1day + (number of month - 1day)
- Renewed pass card valid period start date: 5/May/2004 (renewed date)
- Renewed pass card expiration date: 5/May/2004 + 1day + (1month - 1day)
= 6/May/2004 + 1month - 1day
= 6/Jun./2004 - 1day = 5/Jun./2004
(4) 1= Expiration date + number of month
- Renewed pass card valid period start date: 5/May/2004 (renewed date)
- Renewed pass card expiration date: 5/May/2004 + 1month= 5/Jun./2004

Note: In case of the pass card renewal after expired.


In case of the pass card renewal after pass card is expired, the valid period start date is the renewal date
(in case of 07-0008=0). In this case, if the entry date is before renewal date, the parking fee during the
entry date and paid date is calculated as follows.

Ex.)
- Valid period: 1/Apr./2004 - 30/Apr./2004
- Renewal period: 1 month
- Renewal possible period: 10 days before and after expiration date
(1) Entry date: 1/May (already expired) à renewed: 3/May 
Parking fee is calculated for 1/May - 2/May.
(2) Entry date: 29/Apr. (before expiration date) à renewed: 3/May 
Parking fee is calculated for 29/May - 2/May.
(Renewal pass card’s valid date is started from 3/May.)

In case of the entry before expiration date as example (2), the extra parking fee for 29 and 30/April is
calculated after the pass card renewal even if the original pass card is not expired. The pass card that
entered before the expiration date has to be renewed before the expiration date.

07-0008 Valid period start date for the expired pass card renewal
This parameter specifies the valid period start date in case that the pass card is renewed after it is
expired.
0= Start date = renewal date
1=Start date = next date of the expiration date

07-0012 Read/write mode


This parameter specifies whether the pass card is re-encoded or not. In case of 07-0012=1 (Read only),
the magnetic data is not re-encoded, and the anti pass back check by card data is not possible.

07-0017 Pass card renewal function and validity period


3rd digit value shows monthly renewal or weekly renewal.
07-0017= 0xx  monthly
07-0017= 1xx  weekly

(Service ticket setting)


10-0001 - 0009 Service ticket function, data, and rate change
This parameter specifies the function and data for each service ticket. There are 4 types of the
function : time discount, fee discount, total amount discount, and rate change (% discount is not
available). The rate change function is executed before the other discount function.

(Store discount setting)


11-0001 - 0300 Store discount function, data, and rate change
This parameter specifies the function and data for each store discount. There are 5 types of the
function : time discount, fee discount, total amount discount, surcharge, and rate change (% discount is
not available). The rate change function is executed before the other discount function.

- 172 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Prepaid card setting)


15-0001 Prepaid card usage
This parameter specifies whether the prepaid card is usable or not on the paystation. If prepaid card is
usable, the coupon ticket is not usable on same paystation. One or other of two.
0= No / 1= Yes (combined usage with a coupon ticket is not possible).

(Coupon ticket setting)


16-0001 Coupon ticket usage
This parameter specifies whether the coupon ticket is usable or not on the paystation. If coupon ticket
is usable, the prepaid card is not usable on same paystation. One or other of two.
0= No / 1= Yes (combined usage with a prepaid card is not possible).

(Total setting)
18-0004 Change is dispensed even for the discounted amount
This parameter specifies whether the change is dispensed or not in case the parking fee is less than
discount amount.
0= No / 1= Yes (applied for all discounted amount)
Ex.)
18-0004=1
The parking fee is 100 yen, and discount amount is 300 yen, 200 yen is dispensed as change.
18-0004=0
The parking fee is 100 yen, and discount amount is 300 yen, no change is dispensed.

18-0022 Automatic total


This parameter specifies whether T-total report is issued automatically at the specified time by 18-0023,
or not.
0= No / 1= Printed only for journal / 2= Printed for journal and receipt both

18-0025 Total the discounted amount by the discount time (for each rate)
This parameter specifies whether the discount amount set by 05-0002 is totaled into T-total, or not.

(Category total setting)


20-0001 Types of category totals
This parameter specifies the type of the category totals that printed in T-total.
It is possible to specify till 48 categories.
[ Types of categories ]
1= No. of vehicles total according to parked time duration
This is the number of vehicles total according to parked time duration.
2= No. of vehicles total and fee total according to parked time duration
This is the number of vehicles total according to parked time duration, and also for the parking
fee total for each time duration.
3= No. of vehicles total according to the fee
This is the number of vehicles total according to the paid fee.
4= No. of vehicles total and fee total according to the fee
This is the number of vehicles total according to the paid fee, and also for the parking fee total for
each parking fee range.
5= No. of payment total according to the entry time
This is the number of vehicles total according to the entry time.
6= No. of payment total according to the paid time.
This is the number of vehicles total according to the paid time.
7= No. of payment total according to the entry time and paid time
This total is for number of vehicles total according to the entry time and paid time both.
8= No. of payment total according to the exit time.
This is the number of vehicles total according to the exit time.
9= No. of payment total according to the entry time and exit time
This total is for number of vehicles total according to the entry time and exit time both.

- 173 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

20-0051 Category totals according to the time (1hour each, and 24 categories fixed)
It is possible to print the other category totals other than 20-0001. This total is counted for each hour,
and 24 categories fixed.
5= No. of payment total according to the entry time
This is the number of payment total according to the entry time.
6= No. of payment total according to the paid time.
This is the number of payment total according to the paid time.
7= No. of payment total according to the entry time and paid time
This total is for number of payment total according to the entry time and paid time both.
8= No. of payment total according to the exit time.
This is the number of payment total according to the exit time.
9= No. of payment total according to the entry time and exit time
This total is for number of payment total according to the entry time and exit time both.

20-0072 Entry time judgment criteria of parking for the category totals according to the entry time
This parameter specifies how to define the entry time for the category totals
0= Defined by the communication data (available when all rate data is counted)
1= Defined by the payment data

(Receipt print setting)


21-0001 Receipt printing on Journal, Receipt
This parameter specifies the conditions to print (or record) the receipt/journal records.

(Printing related setting)


22-0001 Width between lines
This parameter specifies the width between line and line for the receipt and journal printing.

22-0002 Print when the receipt is cut


This parameter specifies which items will be printed before the paper is cut.
0= None / 1= Print Logo / 2= Print header

22-0013 Journal recording for the sub total operation


This parameter specifies that the operation record is printed (recorded) or not on the journal when sub
total is printed.

22-0014 Journal recording of the total operation


This parameter specifies that the operation record is printed (recorded) or not on the journal when each
total report (ex. T-total, hopper total, and so on) is printed.
This is available when 18-0038 is 1 or 3.

22-0015 Journal recording of the operator or management operation


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
operator or manager operates on “Operator operation” screen or ”Management operation” screen.

22-0016 Journal recording of shut down and restart


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
power failure and power recovery.

22-0017 Journal recording of Door open or closed


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
door is opened/closed or door alarm is generated/released. If 22-0021= 1, 22-0017 has to be 0.

22-0019 Journal recording of the operation monitor record


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
paystation status is changed (eg. Out of service) by communication or relay input signal.

22-0020 Journal recording of the monitor record


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
coin safe nearly full warning or banknote safe nearly full warning is generated/released.

- 174 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

22-0021 Journal recording of the alarm


This parameter specifies that the operation record is printed (recorded) or not on the journal when out of
change status or coin/banknote safe full status is occurred/released.

22-0022 Journal recording of the error (trouble)


This parameter specifies that the operation record is printed (recorded) or not on the journal when any
error or trouble is happened/released.

22-0023 Journal recording of the cancelled payment


This parameter specifies that the operation record is printed (recorded) or not on the journal when the
payment transaction is cancelled.

22-0030 Re-printing of the previous total


This parameter specifies whether the re-printing function is usable or not.

(Paystation specific setting)


23-0003 Forced exit mode (1st digit) (valid only for EPS)
This parameter specifies in which timing the forced exit is acceptable.
0= Always possible / 1= possible when LC1 is ON
(Forced exit mode: When the external relay signal is input, the gate is forcefully opened and possible to
exit.)

23-0003 Forced exit when out of operation (2nd digit) (valid only for EPS)
This parameter specifies the forced exit mode when out of operation.
0= not possible / 1= possible

23-0007 Non payment mode


This parameter specifies the non-payment mode is applied or not.
(Non-payment mode: When LC1 is on, the gate is automatically opened without any fee displaying or
voice guidance. And the gate is closed automatically after the vehicle is exit. In this mode, any
parking fee is not collected, and only the gate is controlled.)

23-0017 Idle screen re-display timer


In case of no loop, this parameter specifies the timer value from the payment start signal received to the
timing back to idle screen.

23-0018 The payment completion guidance timer (valid only in case of no loop)
In case of no loop, this parameter specifies the timer value to return to the idle screen after the payment
is completed. Within this timer, the receipt is possible to issue.

23-0027 The maximum coin change amount for inserted banknotes in case of normal payment
This parameter specifies the maximum coin change amount for inserted banknotes in case of normal
payment

23-0028 Acceptance when the banknotes was inserted while the change is insufficient for the
inserted banknote.
This parameter specifies whether the paystation accepts or not when the banknotes was inserted while
the change is insufficient for the inserted banknote.
0= No / 1= Yes
Address 23-0027 and 23-0028 is used when the acceptable banknote has to be limited.
Ex.) 23-0027 (maximum coin change amount) = $9.90, 23-0028 = 0 (all banknote is acceptable)
The below banknotes are acceptable.
Parking fee is more than $0.10: $10 banknote
Parking fee is more than $10.10: $10 and $20 banknotes
Parking fee is more than $40.10: $10, $20, and $50 banknotes
Parking fee is more than $90.10: $10, $20, $50 and $100 banknotes

- 175 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

23-0030 In/Out of operation during note safe full


This parameter specifies the In/Out of operation mode during note safe full. In case of “In operation”,
only coin is acceptable. (No banknote reader is acceptable.)

(Denomination setting)
24-0001 - 0020 6 coin reading function
[ 6 coin reading ]
Hopper 1 function
Read coin Hopper 1 No. of read coin denomination
Spare / Recycle
Function denomination denomination
Recy Disp
(24-0011)(24-0012) (24-0001) (24-0020) Func. Read Spare
-cle -ence
Standard (4 Coins) =0 >0 0 Recycle 4 4 - 4
6 Coins
3 recycle hoppers + >0 >0 1 Spare 6 3 1 4
1 spare hopper
6 Coins
>0 >0 0 Recycle 6 4 - 4
4 recycle hoppers
24-0011 and 24-0012 denomination goes to the coin safe directly.

[ 4 coin reading ]
- Read coin denomination setting and hopper denomination setting must be same.
- Denomination setting must be ascending order.

24-0021 - 0025 The read coin denomination coin point


The coin safe full is calculated by the accumulation of the coin point in the coin safe. These parameters
specify each coin point.

(Money management setting)


25-0001 Money management
This parameter specifies the money management mode is usable or not.
“Money management” mode means;
To be specified in what place, and how many coins or banknotes are machine inside by paystation
himself. However, to specify them, the number of coins/banknotes has to be key-input in each case of
rejecting or re-filling the coins or banknotes. So if this mode is not required, please set 0.

25-0003, 0009, 0015, 0021 Default number of coin for each hopper
This parameter specifies the default value of each hopper.
The number of each coin/banknote in each hopper/banknote dispenser is displayed on “Money
management” screen in “Operator operation” mode. If “Default” button on this screen is pressed, the
default number of coin of each hopper (specified in these parameters) is set.
This function is useful if the number of coins in each hopper is always same at the daily operation start
time.

25-0008, 0014, 0020, 0026, 0032 When out of change sensor is activated
This parameter specifies whether the operation mode is shifted to nearly out of change mode or not
when out of change sensor (located bottom of each hopper) is activated.

25-0038 Automatic inventory


This parameter specifies the destination of the automatic inventory executed by the automatic inventory
card (adjustment card).
0= No / 1= to change slot / 2= to coin safe

25-0042 When out of change sensor is activated


This parameter specifies whether the operation mode is shifted to nearly out of change mode or not
when out of change sensor is activated.

- 176 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Output signal setting)


26-0001 - 0036 Output signal function, output time, signal type
This parameter specifies the function, output duration, and signal type for the output signal 1-12 on IBR
pcb.

(Input signal setting)


27-0001 - 0007 Input signal function, output time, signal type
This parameter specifies the function for the input signal 1-7 on IBR pcb.

(Management screen setting)


28-0001 - 0170 Item and level for each button
This parameter specifies the function and level for each button on the “First time operation” screen
(A1-A25), ”Operator operation” screen (B1-B30) and ”Management operation” screen (C1-C30).
Normally default value is OK, but some buttons can be eliminated from the screen.
In case the password or operator card with same or higher level is input, the button is activated.

[ Position of each button ]


First time screen
2000Yr 11Mth 20th (Tues) 18:00 Initial screen operations (2/3) ? Initial screen operations (3/3) ?

A6 A7 A16 A17

A8 A9 A18 A19

A10 A11 A20 A21


A1 A2
A12 A13 A22 A23

A3 A4
A14 A15 A24 A25

A5 To Next
To back To next To Back To Next

Operator Operation screen


Attendant Operation (1/3) ? Attendant Operation (2/3) ? Attendant Operation (3/3) ?

B1 B2 B11 B12 B21 B22

B3 B4 B13 B14 B23 B24

B5 B6 B15 B16 B25 B26

B7 B8 B17 B18 B27 B28

B9 B10 B19 B20 B29 B30

To Back To Next To back To next To Back To Next

Management Operation screen


Administrator Operation (1/3) ? Administrator Operation (2/3) ? Administrator Operation (3/3) ?

C1 C2 C11 C12 C21 C22

C3 C4 C13 C14 C23 C24

C5 C6 C15 C16 C25 C26

C7 C8 C17 C18 C27 C28

C9 C10 C19 C20 C29 C30

To Back To Next To Back To Next To Back To Next

- 177 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Paystation display setting)


29-0003, 0004 Ticket name 1 (The ticket type which is asked for insertion in the ticket insert
message)
This parameter specifies the ticket name for the ticket insertion guidance “Please insert the “XXX”.”
0= Parking ticket (Ticket name 2)
1= Pass card (Ticket name 3)
2= Parking ticket (Ticket name 2) or Pass card (Ticket name 3)

29-0007 - 0009 Ticket name 4


This parameter specifies the ticket name is displayed in the 2nd line of fee indication: “ Please insert the
service ticket, discount ticket , or coupon ticket first ”

29-0026 Idle screen image 1 display switching time


This parameter specifies the idle screen switching time.
0= Not switch (always 1st screen is shown) / 1-999= 0.1-99.9 sec.

29-0028 Type of screen (CPS)


This parameter specifies the type of the CPS idle screen.
0= No display / 1= slide show / 2= still image

29-0029 Type of screen (EPS)


This parameter specifies the type of the CPS idle screen.
0= No display / 1= slide show / 6= still image (2-5 is not available)

(Paystation voice announcement setting)


30-0001 - 0750 Voice announcement setting
This parameter specifies the voice announcement message. Several messages can be announced at
the same time if required. Also how many times, and new message interruption possibility is possible
to set.
Maximum 50 massages can be registered. The announcement timing is specified as next page.

- 178 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

The announcement of which registration No. is to be performed, is shown


Reg. No. Phenomenon Setting address
1 During parking ticket insertion (in case of CPS) 30-0001 - 30-0015
2 (in case of EPS) 30-0016 - 30-0030
3 (pass card renewal) 30-0031 - 30-0045
4 Reading out the fee during the fee is displayed 30-0046 - 30-0060
5 During the fee is displayed < continued after reading out the fee > 30-0061 - 30-0075
(In case out of change occurs)
6 (In case of banknote is usable in lost ticket payment) 30-0076 - 30-0090
7 (In case of banknote is unusable in lost ticket payment) 30-0091 - 30-0105
8 (In case of re-payment because of the lagtime over) 30-0106 - 30-0120
9 (In case of banknote is usable in not lagtime over nor lost ticket payment) 30-0121 - 30-0135
10 (In case of banknote is unusable in not lagtime over nor lost ticket payment) 30-0136 - 30-0150
11 During the fee for pass card renewal is displayed < continued after reading out the fee > 30-0151 - 30-0165
(In case out of change occurs)
12 (In case of banknote is usable) 30-0166 - 30-0180
13 (In case of banknote is unusable) 30-0181 - 30-0195
14 Immediately after the first coin or note was inserted (when a receipt is issueable) 30-0196 - 30-0210
15 (when a receipt is not issueable) 30-0211 - 30-0225
16 Payment completed (in case of CPS) 30-0226 - 30-0240
17 (in case of EPS) 30-0241 - 30-0255
18 (pass card renewal) 30-0256 - 30-0270
19 Payment cancelled (in case of waiting for parking ticket extraction) 30-0271 - 30-0285
20 (in case of waiting for pass card extraction) 30-0286 - 30-0300
21 At inserting discount ticket etc. before fee is displayed (in case of CPS) 30-0301 - 30-0315
22 (in case of EPS) 30-0316 - 30-0330
23 When the ticket insertion direction is not correct 30-0331 - 30-0345
24 When the ticket which cannot be used is inserted (undefined ticket) 30-0346 - 30-0360
25 When the ticket which cannot be read is inserted (magnetic data spoilt) 30-0361 - 30-0375
26 When the paid ticket was inserted within repay time 30-0376 - 30-0390
27 When the credit card was read but the fee is over the credit card payment limit amount 30-0391 - 30-0405
28 When the credit card which cannot be used is inserted 30-0406 - 30-0420
29 When a credit card is inserted during some trouble is happened on the credit server 30-0421 - 30-0435
30 When the expired card is inserted 30-0436 - 30-0450
31 When a nearly expired card is inserted 30-0451 - 30-0465
32 When issue of a receipt is completed 30-0466 - 30-0480
33 When issue of a claim check is completed 30-0481 - 30-0495
34 When inserted coin is returned to the change slot because unreadable 30-0496 - 30-0510
35 When change money could not be dispensed 30-0511 - 30-0525
36 Guidance to the user in case of trouble 30-0526 - 30-0540
37 30-0541 - 30-0555
38 During credit card data inquiry 30-0556 - 30-0570
39 In case the balance is remained because the balance on the prepaid card was not enough. 30-0571 - 30-0585
40 When a no balance prepaid card is inserted 30-0586 - 30-0600
41 When a no balance coupon ticket is inserted 30-0601 - 30-0615
42 When a pass card could not be used due to the settings of CPS. 30-0616 - 30-0630
43 In case pass card is inserted to renew, but out of renewal validity period. 30-0631 - 30-0645
44 30-0646 - 30-0660
45 Unexpired event card (one-time pass card) is inserted 30-0661 - 30-0675
46 AKC: Waiting the period ticket pulled out 30-0676 - 30-0690
AEE: The fee is exceeded the payable amount by proton, and proton card is inserted
47 AKC: The fee is exceeded the payable amount by transportation card, and transportation 30-0691 - 30-0705
card is presented on the reader
AEE: Proton balance is not enough
48 AKC: Transportation card reader or server is in trouble, and transportation card is presented 30-0706 - 30-0720
on the reader
AEE: Proton card re-insertion guide
49 AKC: transportation card data is being confirmed 30-0721 - 30-0735
AEE: Proton card is inserted when the proton reader is in trouble
50 Reserve 30-0736 - 30-0750

- 179 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Voice announcement message list


No. Japanese English (standard) File name Note
1 駐車券を入れて下さい。 Please insert your parking ticket. Phrs0000 Default used
5 駐車券を入れて下さい。クレジットカードによる精算 Please insert your parking ticket. Credit card Phrs0004
もできます。 payment is also available.
6 駐車券、又は定期券を入れて下さい。 Please insert your parking ticket or pass Phrs0005
card.
7 定期券を入れて下さい。 Please insert your pass card. Phrs0006 Default used
10 駐車券を、1に入れて下さい。 Please insert your parking ticket Into No.1. Phrs0009
14 駐車券を矢印の方向に入れて下さい。 Please insert your parking ticket in the Phrs0013
direction of arrow.
18 駐車券、又は精算済み駐車券を入れて下さい。 Please insert your parking ticket or paid Phrs0017
parking ticket.
19 その上に料金が表示されます。 The parking fee will be displayed. Phrs0018
20 駐車券をお取り下さい。 Please take your parking ticket. Phrs0019 Default used
21 定期券をお取りください。 Please take your pass card. Phrs0020 Default used
24 料金を入れて下さい。 Please pay the parking fee. Phrs0023
25 お支払いは、サービス券、プリペイドカード、硬貨、 Please pay the parking fee by discount ticket, Phrs0024 Default used
又は紙幣で精算して下さい。 prepaid card, coins or bank notes.
26 お支払いは、サービス券、回数券、硬貨、又は紙幣 Please pay the parking fee by discount ticket, Phrs0025
で精算して下さい。 coupon, coins or bank notes.
27 お支払いは、サービス券、硬貨、又は紙幣で精算し Please pay the parking fee by discount ticket, Phrs0026
て下さい。 coins or bank notes.
28 お支払いは、回数券、硬貨、又は紙幣で精算して下 Please pay the parking fee by coupon, coins Phrs0027
さい。 or bank notes.
29 お支払いは、プリペイドカード、硬貨、又は紙幣で精 Please pay the parking fee by prepaid card, Phrs0028
算して下さい。 coins or bank notes.
30 お支払いは、硬貨、又は紙幣で精算して下さい。 Please pay the parking fee by coins or bank Phrs0029 Default used
notes.
31 お支払いは、クレジットカード、サービス券、プリペイ Please pay the parking fee by credit card, Phrs0030
ドカード、硬貨、又は紙幣で精算して下さい。 discount ticket, prepaid card, coins or bank
notes.
32 お支払いは、クレジットカード、サービス券、回数券、 Please pay the parking fee by credit card, Phrs0031
硬貨、又は紙幣で精算して下さい。 discount ticket, coupon, coins or bank notes.
33 お支払いは、クレジットカード、サービス券、硬貨、又 Please pay the parking fee by credit card, Phrs0032
は紙幣で精算して下さい。 discount ticket, coins or bank notes.
34 お支払いは、クレジットカード、回数券、硬貨、又は Please pay the parking fee by credit card, Phrs0033
紙幣で精算して下さい。 coupon, coins or bank notes.
35 お支払いは、クレジットカード、プリペイドカード、硬 Please pay the parking fee by credit card, Phrs0034
貨、又は紙幣で精算して下さい。 prepaid card, coins or bank notes.
36 お支払いは、クレジットカード、硬貨、又は紙幣で精 Please pay the parking fee by credit card, Phrs0035
算して下さい。 coins or bank notes.
43 お支払いは、クレジットカード、サービス券、又は現 Please pay the parking fee by credit card, Phrs0042
金で精算して下さい。 discount ticket, or cash.
44 お支払いは、回数券、又は現金で精算して下さい。 Please pay the parking fee by coupon or Phrs0043
cash.
45 お支払いは、プリペイドカード、又は現金で精算して Please pay the parking fee by prepaid card Phrs0044
下さい。 or cash.
46 お支払いは、現金で精算して下さい。 Please pay the parking fee by cash. Phrs0045
47 お支払いは、サービス券、プリペイドカード、又は現 Please pay the parking fee by discount ticket, Phrs0046
金で精算して下さい。 prepaid card, or cash.
48 お支払いは、サービス券、回数券、又は現金で精算 Please pay the parking fee by discount ticket, Phrs0047
して下さい。 coupon, or cash.
55 只今釣銭が不足しています。釣銭の無いよう精算し There is insufficient change. Please pay the Phrs0054 Default used
て下さい。 exact amount displayed on the screen.
57 表示された料金を精算して下さい。 Please pay the parking fee as displayed. Phrs0056 Default used
58 領収証の必要な方は領収証ボタンを押して下さい。 Please push the receipt button to issue a Phrs0057 Default used
receipt
59 領収証をお取り下さい。 Please take your receipt. Phrs0058 Default used
60 戻った駐車券は出口で必要です。 The returned ticket is required when exiting. Phrs0059 Default used
70 戻った駐車券は係員に手渡して下さい。 Please hand this ticket to an attendant. Phrs0069

- 180 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

No. Japanese English (standard) File name Note


75 カードをお取り下さい。 Please remove your card. Phrs0074
76 出口判定機に挿入してください。 Please insert your ticket into the exit reader. Phrs0075
77 出口にてこの券を挿入してください。 Please use this ticket when exiting. Phrs0076 Default used
78 駐車券を先に入れて下さい。 Please insert your parking ticket first. Phrs0077 Default used
82 駐車券、又は定期券を先に入れて下さい。 Please insert your parking ticket or pass card Phrs0081
first.
86 このカードは期限切れです。 Your card has expired. Phrs0085 Default used
87 このカードは間もなく期限切れとなります。 Your card will expire soon. Phrs0086 Default used
88 このカードは無効です。 This card is invalid. Phrs0087 Default used
89 このカードは使えません。 This card is unusable. Phrs0088 Default used
90 このカードはお取り扱いできません。 This card is not be used. Phrs0089 Default used
95 クレジットカードで精算できる限度額を超えているた You cannot pay this amount by credit card Phrs0094 Default used
め、クレジットカードによる精算はできません。 because the amount exceeds the maximum
allowed .
96 制限時間を超過しています。 You have exceeded the time limits. Phrs0095 Default used
97 サービス時間を超過しています。 You have exceeded the service time limits. Phrs0096
98 この券は、ご利用できません。 You cannot use this ticket. Phrs0097
99 再度、精算して下さい。 Please pay again. Phrs0098 Default used
100 恐れ入りますが、受付においで下さい。 Please go to the reception desk. Phrs0099
101 恐れ入りますが、管理室においでください。 Please go to the parking office. Phrs0100
102 係員呼出ボタンを押して下さい。 Please press the “INTERCOM” button. Phrs0101
103 恐れ入りますが、インターホンで連絡してください。 Please call an attendant via the intercom. Phrs0102
104 恐れ入りますが、係員に連絡して下さい。 Please contact an attendant. Phrs0103 Default used
105 係員がまいります。しばらくお待ち下さい。 Please wait for an attendant. Phrs0104
106 ありがとうございました。 Thank you. Phrs0105
107 ご利用ありがとうございました。 Thank you for your visit Phrs0106 Default used
108 気を付けてお帰り下さい。 Please be careful on your way Phrs0107
109 ありがとうございました。又のご利用をお待ちしており Thank you. We look forward to seeing you Phrs0108 Default used
ます。 again.
111 クレジットカードで精算される方はクレジットカードを Please insert your credit card if you wish to Phrs0110
入れて下さい。 pay by credit card.
118 ただ今、クレジットカードはお取り扱いできません。 Credit cards are not accepted. Phrs0117 Default used
120 ただ今、クレジットカードの照会中です。 Now checking your credit card. Phrs0119 Default used
121 しばらくお待ち下さい。 Please wait. Phrs0120 Default used
124 おつりが不足しています。預り証を係員に渡して、お There is insufficient change. Please contact Phrs0123 Default used
つりをお受け取り下さい。 an attendant with your claim check.
125 おつりが不足しています。領収証を係員に渡して、お There is insufficient change. Please contact Phrs0124
つりをお受け取り下さい。 an attendant with your receipt.
126 預り証は、右下の釣り銭取り出し口からお取り下さ Please take a claim check from change Phrs0125
い。 outlet at the lower right.
127 ただ今、この精算機はご利用出来ません。 This Pay Station is temporarily out of service. Phrs0126
128 他の精算機をご利用下さい。 Please use other Pay Station. Phrs0127
129 プロトンカードで精算できる限度額を超えているた You cannot pay this amount by Proton card Phrs0128
め、プロトンカードによる精算はできません。 because the amount exceeds the maximum
allowed.
130 プロトンカードを再挿入してください。 Please reinsert your Proton Card. Phrs0129
131 ただ今、プロトンカードはお取り扱いできません。 Proton cards are not accepted. Phrs0130
132 期間券をお取り下さい Please remove your Period Card. Phrs0131
133 交通カードで精算できる限度額を超えているため、交 You cannot pay this amount by Phrs0132
通カードによる精算はできません。 Transportation card because the amount
exceeds the maximum allowed.
134 ただ今、交通カードはお取り扱いできません。 Transportation cards are not accepted. Phrs0133
137 カード情報を照合中です。 Now checking your card. Phrs0136
144 この券は精算済みです。 The parking fee has been paid for this ticket. Phrs0143 Default used
145 預り証をお取り下さい。 Please take your claim check. Phrs0144 Default used
146 再度、矢印の方向に入れてください Please re-insert card or ticket in the direction Phrs0145 Default used
that indicated by the arrow.
147 釣銭取り出し口を確認してください。 Please check the changes outlet. Phrs0146 Default used
148 おつりをお取り下さい Please retrieve your change. Phrs0147

- 181 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

Maintenance guidance (1st language support only)


No. Japanese English (standard) File name Note
151 警報ブザー1 Buzzer 1 Phrs0150 System used
154 効果音 1 Alarm 1 Phrs0153
161 コインホッパーを確認して下さい。 Please check the coin hopper Phrs0160 System used
167 内ドアを閉めてください。 Please close the inside door Phrs0166 System used
168 紙幣払出機のドアを閉めて下さい。 Please close the note dispenser unit Phrs0167 System used
171 金庫を確認してください。 Please check the safe Phrs0170 System used
174 プリンタを確認してください。 Please check the printer Phrs0173 System used
182 CF がセットされていません。 Compact flash card is not set Phrs0181 System used

Fee guidance
No. Japanese English (standard) File name Note
192 料金は Fee is Phrs0191 Default used

- 182 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Information record setting)


31-0004 - 0016 Maintenance DB write-in record
These values are fixed from application software version 2 to prevent to set too big value.

(Password setting)
32-0001 - 0250 Password setting for each operator number
This parameter specifies the password (4 digits, max.50 passwords) to enter to the “Operator operation”
screen or “Management operation” screen. And “Function” and ”Level” is also possible to define for
each password to make limitation which items can be operated.
When “Card issue” button is assigned on “Operator operation” screen or ”Management operation”
screen, the unissueable card is selectable.
[ Valid / Invalid ] 0= Valid / 1= Invalid
[ Password ] 0= Not used / 1-9999
[ Function ] 0-3
0= First time operation screen
1= Operator operation screen
2= Management operation screen
3= Engineer operation screen
[ Function ] 0-4
Each button has a level setting (28-0001 - 0170). If the level for the button is same or
less than the operator’s level specified by this parameter, he can operate the button.
[ Unissueable card ] 0-65535
Settings of the unissueable card when issuing the card by “Card issue” button.

1 Ticket If some card has to be unissueable, the value of the desired card (shown in
2 Pass card
4 Service ticket
left) should be subtracted from 65535. This value is the parameter value.
8 Store discount ticket Ex.) If parking ticket, pass card and prepaid card are unissueable:
16 Discount ticket 65535-1-2-64=65468 ß This is the parameter value.
32 Coupon ticket
64 Prepaid card
128 Point card

- 183 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

5-3. Fee Setting


(Fee calculation basic setting)
33-0001 Fee calculation method
This parameter specifies the fee calculation method from Day-night zone and Regressive zone.
Day-night zone: The fee calculation depends on the time duration.
Ex.) 8:00 - 0:00: $2.00/30m.
0:00 - 8:00: $1.00/60m.
Regressive zone: The fee calculation depends on the parked time.
Ex.) Parked time= 0 - 12h: $3.00/30min.
12 - 24h: $2.00/60min.
24 - 36h: $1.00/60min.
36h or more: $1.00/60min.

33-0002 Daily maximum fee type


There are 3 types of the daily maximum fee.
0= No daily maximum fee
1= 24 hours maximum fee
2= Time specified daily maximum fee
3= 2 types of time specified daily maximum fee (cannot apply for regressive zone method)

[ Maximum fee ]
- Absolute maximum fee
- Daily maximum fee 24 hours maximum fee

Time specified daily maximum fee

2 types of time specified daily maximum fee

Absolute maximum fee:


The parking fee NEVER exceeds the absolute maximum fee. The paystation can calculate the fee for
maximum 1 year parked time.

24 hours maximum fee:


If the parked time is within 24 hours, the fee does not exceed 24 hours maximum fee.

Time specified daily maximum fee:


If car entered after 1st rate zone start time (or regressive zone start time), and exit before next day 1st
rate zone start time (or regressive zone start time), the fee does not exceed the time specified daily
maximum fee.

2 types of time specified daily maximum fee (only for Day/night zone):
The maximum fee is calculated for the time duration between 1st rate zone start time and 4th rate zone
start time, and the other maximum fee is calculated for the time duration between 4th rate zone start
time and next day 1st rate zone start time.

- 184 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

33-0003, 0004 Lost ticket fee


This parameter specifies how to charge the lost ticket fee.
[ Notice for the lost ticket fee ]
(1) In case of the fixed fee
The detailed discussion is necessary with parking operator.
If the lost fee is too cheap, the illegal usage by the long term parked user is triggered. If it is too
expensive, sometimes the user cannot pay the lost fee, and in that case he may break the barrier
gate.
(2) In case of the calculated fee from the specified time
Normally the lost fee is calculated from the parking lot opening time. By this, the lost fee depends
on the paid time. This means this setting is user friendly.
However the lost fee is calculated within 24 hours only. So this setting is not so fit for 24 hours
operation parking lot, because if parked time exceed 24 hours, the lost fee is always cheaper than
the correct fee.

33-0005 - 0014 Fee calculation when rate change signal is input


This parameter changes the fee rate if the rate change signal is input.

33-0015 Handling of unit time surplus


This parameter specifies how to handle the surplus of unit time when the vehicle parked across 2 rate
zones.
0= Continue / 1= Cut off.
Normally “0= Continue” should be taken.

0= Continue
1st rate zone 20:00 2nd rate zone
$4.00/1h $2.00/30min.

In 19:30 Out 20:30


$4.0 Fee=$4.00

Even vehicle parked across


2 rate zones, the previous
zone’s unit time is
continued.

1= Cut off
1st rate zone 20:00 2nd rate zone
$4.00/1h $2.00/30min..

In 19:30 Out 20:30


$4.00 $2.00 Fee=$6.00

This fee is calculated from


new rate zone start time.

Cut off 30 minutes


surplus!!

- 185 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

33-0016 Handling of unit time surplus when fixed fee time zone or pass card time zone started
This parameter specifies how to handle the surplus of unit time when the fixed fee zone or pass card
zone is started.
0= Not add to zone end time
1= Add to zone end time
Normally “0= Not add to zone end time” should be taken.

0= Continue
8:00 20:00
Fixed fee zone
$4.00/1h (or pass cad zone) $2.00/30min
In 7:30 Out 20:30

$4.00 $2.00
Cut off the
surplus of the unit Fee=$6.00
time

1= Add to zone end time


8:00 20:00
Fixed fee zone
$4.00/1h (or pass cad zone) $2.00/30min
In 7:30 Out 20:30

$4.00
Continue the
Fee=$4.00
previous unit
time

33-0017 How to take the fee after time discount or pass card time zone / How to take the fee after
the midnight zone
This parameter specifies that the parking fee after the time discount or pass card time zone (fixed fee
zone) is calculated on the basic fee (1st pattern) or additional fee (2-12th pattern).
And also this specifies the parking fee after the midnight zone.

Note:
“After pass card time zone” means that the vehicle entered in the pass card time zone, and exited after
the pass card time zone. So when the vehicle parked whole pass card time zone, this setting is invalid
(charged on the additional rate).
In Out
Fixed fee zone Basic fee: $4.00/1h
(time discount) Additional fee: $2.00/30min

Specify the fee is charged on the basic


fee or additional fee (in case of the
regressive zone, on which rate pattern).

- 186 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

33-0030 Duplication of pass card time zone and time discount


When time discount service ticket is used in the pass card time zone, the time discounted can be
functioned out of the pass card time zone.
0= The duplicated time discount is invalid.
1= After the pass card time zone finished, discount the duplicated time discount.
Normally this parameter is set “1”.

Note:
This parameter is invalid for the fixed fee zone (=midnight zone). The service ticket is just swallowed.

8:00 20:00
$2.00/30min Pass card time zone $2.00/30min
In 7:30 Out 20:30

$2.00 $2.00

1= After the pass card time zone finished, discount the duplicated time discount.
When 1 hour discount ticket is used, 30 minutes (7:30-8:00) and 30 minutes (20:00-20:30) is
discounted.
So the parking fee is $0.00.

0= The duplicated time discount is invalid.


When 1 hour discount ticket is used, 1hour (7:30-8:30) is discounted.
So the parking fee is $2.00.
If 13 hours discount ticket is used, the parking fee is $0.00.

33-0031 Service time


This parameter specifies the service time. If it is changed from the management operation screen, this
parameter is also changed.
Within service time, the fee is 0, but if service time is exceeded, the fee is calculated from the entry time.
Service time

Free

Fee from entry time

IN

33-0032 Grace time


This parameter specifies the grace time. If it is changed from the management operation screen, this
parameter is also changed.
The parking fee is not changed within the grace time.
Minimum 1 unit fee is charged even within the grace time.
1 unit fee 1 unit fee 1 unit fee 1 unit fee

Grace time

Grace time 1 unit fee


Grace time

3 unit fee

IN

- 187 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

33-0033 Lagtime (EPS only)


This parameter specifies the lagtime. If it is changed from the management operation screen, this
parameter is also changed.
Within lagtime after the payment, the additional fee on EPS is 0. If lagtime is exceeded, the additional
fee is charged.

33-0034 Repay time (CPS only)


The paid ticket is not accepted within the repay time.

(Day night zone fee calculation setting)


34-0001, 0002 Time discount valid start time/End time
This parameter specifies the time duration for the discount time.
In case the discount time for each rate (05-0001 - ) is used, the time discount function is worked in this
duration.

34-0004, 0008, 0012, 0016, 0020, 0024 Overlapping method and overlapping time
This parameter specifies the overlapping method and overlapping time.
Ex.) 8:00-23:00 $3.00/1h
22:00-10:00 $10.00

In this case the parameter setting should be as follows.


34-0003 0800
34-0004 1200
34-0007 2200
34-0008 0100

Normally, the overlapping in the morning time should be method 1,


In the night time should be method 0.

Method 0
Fee zone end time

IN OUT
IN OUT
IN OUT
IN OUT
IN OUT
IN OUT

Fee zone start time


IN: Entry
OUT: Exit

Method 1
Fee zone end time

IN OUT
IN OUT
IN OUT
IN OUT
IN OUT
IN OUT

Fee zone start time


IN: Entry
OUT: Exit

- 188 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

34-0005 - 0026 Rate zone basic time/additional time


This parameter specifies the basic time and additional time for each rate.
In case of the fixed fee zone (as like an overnight fee), the basic time and additional time should be
0000.

34-0040 - 0055 Pass card start time (discount time)/end time


This parameter specifies the pass card start time and end time.
When the discount time is set, it is set in the start time address.
In case of start time=end time, that pass card is a whole day valid pass card.

[ Important notice ]
Please take care for the pass card start time and 1st rate zone start time. The date change time for
paystation is 1st rate zone start time. If there is a time gap between the pass card start time and 1st
rate zone start time, the pass card start time is shifted despite the intention.

Ex.) 1st rate zone start time=8:00


Pass card 0:00-0:00 (whole day valid)
Saturday and Sunday is invalid, the other day is valid

The date start time for paystation is 8:00, so one day for paystation is from 8:00 to 8:00. On the other
hand the pass card is valid from 0:00.
If the pass card holder wants to use the pass card at 7:00 on Monday morning, still the pass card is
invalid. Because the Monday is not started yet from the paystation point of view. To avoid this, the
pass card start time and end time has to be 8:00.

34-0060 Absolute maximum fee


If this parameter is 0, always fee is 0 even if the basic fee and additional fee is set.

34-0061 Daily maximum fee (1st)


This parameter is valid when daily maximum fee parameter (33-0001) is set.
In case of “2 types of time specified daily maximum fee”, 1st maximum fee (for 1st - 3rdrate zone) is set
in this address.

34-0062 Daily maximum fee (2nd)


This parameter is valid when daily maximum fee parameter (33-0001) is set
In case of “2 types of time specified daily maximum fee”, 2nd maximum fee (for 4th - 6th rate zone) is set
in this address.

34-0063 - 0074 Basic fee/Additional fee


This parameter specifies the basic fee and additional fee for 1st - 6th rate zone.
In case of the fixed fee zone (as like an overnight fee), the basic fee and additional fee should be same
value.

- 189 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(Regressive zone fee calculation setting)


35-0004, 0006 Regressive zone/Midnight zone overlapping time
This parameter specifies the overlapping method and time for the regressive zone and midnight zone.
The concept is same as for the day night zone.

35-0007, 0008, 0009 Repetition setting


Please see below.

[ Regressive zone programming technique ]


The “Ex.1” fee calculation can be simplified as “Ex.2”.

Ex. 1 Fee Unit Unit Unit


Pattern Fee Time Factor
1 $1.00 1h 2
2 $2.00 1h 1
3 $1.00 1h 2
4 $2.00 1h 1
5 $1.00 1h 2
6 $2.00 1h 1
7 $1.00 1h 2
8 $2.00 1h 1
9 $1.00 1h ∞

Ex. 2 Fee Unit Unit Unit


Pattern Fee Time Factor
1 $1.00 1h 2 Repetition start pattern=1
2 $2.00 1h 1 Repetition end pattern=2
3 $1.00 1h ∞ No. of repetition=3

35-0061 Daily maximum fee


Same as day night zone (34-0061).
However 2 types of time specified daily maximum fee is not possible to use.

35-0062 Midnight fee


This parameter specifies the midnight fee (fixed fee).

- 190 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

5-4. Other Extended Function Setting


(Credit card setting)
38-0002 Credit card max. payable amount
This parameter specifies the maximum payable amount by credit card.
In case the parking fee exceeds the maximum amount, the credit card is not possible to use. If credit
card is inserted, the card is returned with error message display and voice announcement.

38-0004 Credit card payment mark printing on the parking ticket


This parameter specifies whether the credit card payment mark (“C”) is printed on the paid ticket or not.

38-0005 Data receiving timer (TEXT)


This parameter specifies the data receiving wait timer.
As a response for “Reference data”, “Sales data“ and “Status request data”, “Reference result data”,
“Sales response data” and “Status data” is responded from the credit server.

38-0009 Card number printing on the receipt


This parameter specifies how to print the credit card account number.
38-0009=1 Account No. 1234**************** [37] Credit card account number
38-0009=2 Account No. ****************7890 [37] Credit card account number

38-0041 Credit Card IN/OUT


If appropriate online server and credit card server is connected to the parking system equipments, credit
card IN/OUT function can be available. At that time this parameter should be set 1.

Online Server

Credit Card Server


Entry Data
Payment Data
Credit Card Authentication Data

NT-7900 NT-7600

Concept drawing

- 191 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

(NT7900 specific parameter)


41-0004 - 0006 Language setting
This parameter specifies the 1st, 2nd, and 3rd language.
1st language: This language is normally used. The receipt is printed always in 1st language. 2nd, 3rd
language: These language is applied by language selection button.

41-0009 Communication data rate change


This parameter specifies the amount information format in the communication data. The amount value
in the communication data can be reduced into 1/10 or 1/100.
If this parameter is set, the host pc application has to put the amount value back to the original value.

41-0010 Magnetic reader type


To secure the encode data quality, in case of the parameter address 41-0010=2, the ticket or card is
acceptable only with the upper/right side magnetic stripe position. Otherwise the error message is
shown on the screen, and the ticket or card is rejected.
But if ISO2 credit card is inserted with lower/right side magnetic stripe position, it is acceptable.
Because the credit card is not re-encoded.

41-0011 Journal printer type


This parameter specifies the journal printer type.
0= Soft journal (compact flash)
The information is recorded in the compact flash by text file format.
1= Journal printer (option)
The information is printed on the journal printer.

41-0018 Gate action in case the LC2 is ON when the payment is finished (EPS)
This parameter specifies how work the barrier gate in case the LC2 is ON when the payment is
completed.
0= Gate will be opened immediately. The barrier is closed when LC2 become OFF.
1= Gate will be opened after LC2 become OFF

41-0019 Back out ticket watch timer after the payment is finished (EPS)
This parameter specifies whether the back out is watched or not.
0= Not watch. In this case paystation is waiting until LC2 is ON/OFF, and next transaction is not
accepted.
1-60= In case the LC1 is OFF before LC2 is ON, the gate is closed after 1-60 seconds

41-0028 Number of coins for consecutive dispensing


This parameter specifies how many pieces of coin is consecutively dispensed from the hopper. This
parameter is existing to prevent the coin jam in the coin shoot from the hopper to the coin safe or coin
change outlet.
If big coin (eg. UK 50cent, Australian 50cent) is used for the coin change, please set this value “2”.
Otherwise change coin can be stuck is the shoot.

41-0036, 0037, 0038, 0039 DST setting


This parameter specifies the daylight saving time start date/time and end date/time.
Ex.) The daylight saving time is started from 2:00AM on the first Sunday of April, and ended at 2:00AM
on the last Sunday of October.
41-0036: 0417 --- April, 1st week, Sunday (1-7=Mon.-Sun.)
41-0037: 0200 --- 2:00 AM
41-0038: 1057 --- October, 5th week (Last week), Sunday (1-7=Mon.-Sun.)
41-0039: 0200 --- 2:00 AM

- 192 -
NT7900 Series Service Manual (Parameter Edition) Ver.4 < Confidential >

41-0041 - 0052 Service time


This parameter specifies the service time for each rate.
Service time: Within this time, the parking fee is free.

41-0053 - 0064 Grace time


This parameter specifies the grace time for each rate.
Grace time: this is an expansion time for each unit time.

41-0065 - 0076 Lag time


This parameter specifies the lag time for each rate.
Lag time: Within this time, the paid ticket can exit by free.

(Online server connectivity setting)


43-0001 Online server connection
To have the extended function for the parking system, online server PC can be connected to the
paystation. When it is connected, this parameter should be 1.

Online server example: Online discount

POS Server

Online Server POS Sales Data


Online Function Data

NT-7900 NT-7600

When ticket is inserted, paystation immediately inquire to the online server whether the ticket has a
discount data or not, and if discount data is available for the inserted ticket, parking fee is discounted
based on the discount data from the online server.

- 193 -
275 Mamedocho Kohoku-ku, Yokohama, Japan 222-8558
TEL.:+81-45-401-1441 FAX.:+81-45-439-1150

http://www.amano.co.jp/English

QC956203 (14) Printed in Japan


M 8910A1-2012.10

You might also like