Professional Documents
Culture Documents
QuantorVet Plus User Manual - EN - 130815
QuantorVet Plus User Manual - EN - 130815
QuantorVet Plus User Manual - EN - 130815
anua
al Veterina
Ve ary
Accquisition and
d diagn
nostic softwa
are
D
Doc No.: TM
T -722-EN
N
R
Rev 1.0.1 Aug
A 2013
P
Part No.: CR-FPM-04
C 4-022-EN
© Coopyright 2010
0 3D Imaginng & Simula tions Corp, all rights res
served, printted, and pub
blished
in So
outh Korea byy 3D Imaging & Simulattions Corp.
Userr Manual
ntorVet Plus
Quan TM -72
22-EN
Co
ontact
815, Tamnip-Dong
T g, Yuseong-G
Gu,
Daeje
eon, Korea
Tel : 82-42-931-21
8 100
Fax : 82-42-931-22299
site : www.3D
Webs DISCimagingg.com
E-mail : info@3DIISCimaging.c
com
3DISC C Americas
22560 0 Glenn Dr, S
Suite 116
Sterlin
ng, VA 201644 USA
Tel : 1-703-430-60
1 080
E-mail : info@3DI SCimaging.c
com
3DISC C Europe
Gydevang, 39-41,, 3450 Allero
oed, Denmark
Tel : 45-88-276-65
4 50
E-mail : info@3DIISCimaging.ccom
2
Userr Manual
Quan
ntorVet Plus 22-EN
TM -72
Warrnings and
d used sym
mbols
DAN
NGER
The functionality
f of the softw
ware can be destroyed inn the case of
incorrect use.
If una
authorized cchanges hav ve been mad de to delive red software e
and hardware ccomponents, the warranty by 3D Imaging &
Simuulations Corrp. becomes s void. 3D Imaging
I & Simulations s
Corpp. will not acccept any responsibility or liability foor the proper
functioning oh thee product in such
s a case.
DAN
NGER
Gene eral mandato ory action ma anual.
The functionalityy of the syste em can be destroyed
d inn the case of
o
incorrrect use.
If una
authorized cchanges have e been madee to deliveredd system and d
acceessories, the warranty by y 3D Imaginng & Simulaations Corp p.
becoomes void. 3D Imaging g & Simulatio
ons Corp. w will not accep
pt
any responsibility
ty or liability for the imp
proper functiioning of the e
product in such a case.
WAR
RNING
The functionalityy of the sysstem can be e limited in the case of
o
incorrect use. HHints that require special attention.
NOT
TE
Notess represent i nformation that is important to know but which do
o
not afffect the funcctionality of the system.
3
User Manual
Users must take steps to secure their networks and protect their Medical Information Systems
which includes a risk assessment strategy, network defense in depth strategy, business
continuity planning, etc.
User Authentication
Only authorized users should log on to computers on which medical information
systems are installed.
Password Security
In today’s world, passwords can be compromised in literally seconds by using a wide
variety of tools and techniques. To lower the possibility of a compromised password, it
is vital to adhere to a set of protocols.
Choose a password between 7 ~ 10 characters using both alpha and numeric
characters.
Do not share the password.
Do not base the password on a pet’s name, a relative’s name or any dictionary
word.
Do not write down the password.
Do not leave the account logged on.
Internet Usage
Accessing to the Internet exposes the computer to a plethora of vulnerabilities such as:
Viruses
Spyware
Trojans
Hostile Codes
It is not recommended to install any unauthorized software on the computer. Peer-to-
peer software can expose your entire hard drive to any individual running the same
type of software.
Antivirus Products
Use of antivirus software can increase CPU and memory usage, which can cause a
slight degradation in the performance of the system. However, functionality should not
be affected.
Physical Security
It is recommended that the user employs some method of physical security when
dealing with the system to ensure that only authorized personnel have access to the
product.
4
User Manual
There are several vulnerabilities a malicious user could exploit locally. Some examples
are:
Theft of equipment
Local password cracking
Installation of hardware key loggers
5
User Manual
Table of contents
1. Introduction ................................................................................ 10
1.1. Main Features..................................................................................11
2. Installation ................................................................................. 12
2.1. Environment ................................................................................... 12
2.1.1. Recommended Computer Requirement ........................................................ 12
2.1.2. Minimum Computer Requirement .................................................................. 12
2.2. Installation ...................................................................................... 13
2.2.1. Software Installation ....................................................................................... 13
2.3. Start and Termination ..................................................................... 17
2.3.1. System Start ................................................................................................... 17
2.3.2. Start Program ................................................................................................. 17
2.3.3. Terminate Program ......................................................................................... 18
2.4. FireCR Calibration.......................................................................... 19
2.4.1. Calibration Geometry ..................................................................................... 21
2.4.2. Step 1: Auto Alignment ................................................................................... 22
2.4.3. Step 2: Erase .................................................................................................. 22
2.4.4. Step 3: Scan Blank ......................................................................................... 23
2.4.5. Step 4: Scan Low Dose .................................................................................. 24
2.4.6. Step 5: Scan Mid Dose ................................................................................... 25
2.4.7. Step 6: Scan High Dose ................................................................................. 26
2.4.8. Step 7: Calibration! ......................................................................................... 27
2.4.9. Step 8: Cancel ................................................................................................ 27
2.4.10. Note ................................................................................................................ 28
3. Screens ..................................................................................... 30
3.1. Supported Resolutions ................................................................... 30
3.2. Home .............................................................................................. 30
3.3. Navigation Bar ................................................................................ 31
3.4. Studies ........................................................................................... 31
3.5. New Study ...................................................................................... 32
3.6. Region Selection ............................................................................ 32
3.7. Patient Information ......................................................................... 32
3.8. Scan ............................................................................................... 33
3.9. Review ............................................................................................ 33
4. Home Window ........................................................................... 34
6
User Manual
7
User Manual
8
User Manual
9
User Manual
1. Introduction
This user manual provides detailed information about the operation of QuantorVet+ and the use
of the range of facilities included in the software to make the processing and administration of
your medical X-ray images as efficient as possible.
Safety Instruction
To ensure the safety of patients, staff and other persons, any changes to software and hardware
delivered by 3D Imaging & Simulations Corp. may only be made with prior written permission
from 3D Imaging & Simulations Corp.
Liability
If unauthorized changes have been made to delivered software and hardware components, the
warranty by 3D Imaging & Simulations Corp. becomes void. 3D Imaging & Simulations
Corp. will not accept any responsibility or liability for the improper functioning of the product in
such a case.
10
User Manual
QuantorVet+ Software allows facilities to quickly input patient data – or access it directly from
their HIS, RIS or PACS for improved productivity and accuracy. Image acquisition is supported
by a fully developed list of exams and anatomies, and a viewer displays images on a monitor to
facilitate quality control and image management. Once completed, the study can be sent to the
PACS, printed on a dry film printer, or burned onto a CD or DVD.
To optimize images, technicians can crop, etch, enhance, increase brightness and contrast, and
perform other adjustments. Regions of interest can be highlighted, and users can easily change
the order of images or delete images in the multi-view window. Stitching capabilities for images
of legs, spines, and other anatomical areas are particularly useful for orthopedic and
chiropractic facilities.
Integrated Viewer
For smaller facilities without a HIS, RIS or PACS, QuantorVet+’s local database enables direct
management of patients and studies utilizing a unique viewer function. Technicians and
radiologists can review DICOM and non-DICOM images on the same station they acquired it on.
QuantorVet+ features a full range of output options, including DICOM CD-burn, embedded view,
DICOM send SCU, and DICOM print for dry film printers. The combined DICOM Patient CD and
dry film print creates patient CD / DVDs that include DICOM DIR structure and a built-in viewer.
11
User Manual
2. Installation
2.1. Environment
2.1.1. Recommended Computer Requirement
12
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.2. Installlation
2.2.1. Softw
ware Insttallation
Log on tot the PC using an admin nistrator acco
ount.
Connectt USB Dongle to USB po rt.
Insert Installation CDD. Install prog
gram will auttomatically laaunch.
If the insstall program
m is not launcched automa atically, find and executee the “QuanttorVet
2.x.x. Se etup.exe” file
e on the CD..
Click the
e “Next” butto
on
as showwn in Figure 2.1.
2
Figure
F 2.1 Welcome
W Diaalog Box
F
Figure 2.2 Component
C ts Dialog Bo
ox
13
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Fiigure 2.3 Co
omponents D
Dialog Box
Figure
e 2.4 Installation Locationn Dialog Box
x
14
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Installation status of
o the FireC CR
USB drivver will be dis
splayed as
Shown in Figure 2.7
15
Userr Manual
ntorVet Plus
Quan TM -72
22-EN
If installa
ation is succe
essful,
2 will show up.
Figure 2.8
Click "Finish" to finish
the instaallation.
F
igure 2.8 Installation Finnish Dialog Box
B
If the Windows
W Seecurity Dialo
og
Box pop ps up after ins
stallation,
click [Allow access].
16
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
WARNING
Do not
n run anyy application
n software other than QuantorVett+
durin
ng operation
n of the sccanner. This may slow the scanneer
respo
onse.
2.3.2. Start
rt Program
m
After Windows iss successfully booted, yyou can launnch the Qua antorVet+ prrogram by double
d
clickin
ng the Quan
ntorVet+ icon
n on your dessktop as sho
own in figure 2.11.
QuantorVet+
Figure 2.11. Short Cut
C Icon
17
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.3.3. Term
minate Prrogram
Selecct the System
m button as shown
s in Fig ure 2.12 on the
t Home Window.
W
Now you can exit the application by selectting "Exit" in the System Menu.
18
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4. FireC
CR Calibrration
Selecct IP Calibra
ation in the System
S Men
nu, then the following wiindow will poop up. Follo
ow the
stepss in the menu
u.
WAR
RNING
Calibrrate the scan
nner before use. The “P Please calibrrate system””
messa age pops up if the scanner is not calib
brated or callibration data
a
does not
n exist.
It is re
ecommended d to calibrate
e the reader after movingg it and as a
part off regular maiintenance.
Figure
e 2.14. IP Calibration
WAR
RNING
Calibrration shoulld be done e for both a Universsal Cassette e
contaiining IP 14” x 17” and a Universal Ca
assette contaaining IP 10””
x 12”.
19
User Manual
Name Description
20
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.1. Calib
bration Geometry
G
WAR
RNING
X-ray radiation fie ld must cove
er the whole area of the ccassette.
21
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.2. Step
p 1: Auto Alignmen
A nt
Figure 2
2.16. Auto Alignment
A
2.4.3. Step
p 2: Erase
e
Fig
gure 2.17. Errase
The Erasse button is enabled whe en the cassette is inserted to the readder.
e before cali bration.
It erasess the cassette
22
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.4. Step
p 3: Scan Blank
Figure
e 2.18. Scan
n Blank
23
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.5. Step
p 4: Scan Low Dosse
Figure 2
2.19. Scan Low
L Dose
The Sca an Low Dose e button is en nabled after performing a Scan Blan nk.
Expose the cassette e to the X-rayy with the coonditions note ed below thee Scan Low Dose
button.
Then, innsert the cas ssette into tthe reader and
a click Scan Low Dos ose to acquire the
second calibration
c im
mage.
The mea an intensity value
v of the l ow dose imaage is displayyed beneath the button.
The mea an intensity value
v of the llow dose is displayed
d in green if the value is with
hin the
acceptabble range.
The mea an intensity value of the low dose is s displayed in n red if the vvalue is not within
the acceeptable rangee, click Acce ept to continuue anyways or o Reject to try again.
Increasee the X-ray dose
d to increease the mea an intensity value or low wer the X-ray y dose
to decreease the me ean intensity value. *If changes
c aree made to ttechnique (D Dose)
please note
n the neww values use ed (KVp, mA As) and inpu ut the new d data in
C:\Quan ntorMed+\firrecr.ini
24
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.6. Step
p 5: Scan Mid Dosse
Figure 2
2.20. Scan Mid
M Dose
25
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.7. Step
p 6: Scan High Do
ose
Figure 2
2.21. Scan High
H Dose
The Sca an High Dos se button is eenabled afterr performing a Scan Mid D Dose.
Expose the cassette e to the X-rayy with the conditions noteed below thee Scan High Dose
button.
Then, innsert the cassette into the e reader andd click Scan n High Dosee button to acquire
the fourtth calibration image.
The intensity value ofo the high do ose image is displayed beneath the bbutton.
The inteensity value of the high dose is displayed in grreen if the vvalue is within the
acceptab ble range.
The inteensity value of the high d dose is disp
played in red d if the valuee is not withhin the
acceptab ble range, click Accept to o continue anyways
a or Reject
R to acqquire the high
h dose
image ag gain.
Increasee the X-ray dose
d to incre
ease the mea an intensity value or lowwer the X-ray y dose
to decreease the me ean intensity value. *If changes
c aree made to ttechnique (D Dose)
please note
n the new
w values use ed (KVp, mA As) and inpu ut the new d data in
C:\Quan ntorMed+\firrecr.ini
26
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.8. Step
p 7: Calibration!
2.4.9. Step
p 8: Canc
cel
You can n exit calibrattion window in the middle of process. This will aabort your current
c
calibratio
on process.
27
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
2.4.10. Note
e
When thhe mean inte
ensity value for each ste
ep is within acceptable range, value
es are
shown in
n green.
When th
he mean intensity value fo
or each step n acceptable range, value
p is not within es are
shown in
n red.
Figure 2.2
24. Improper Calibration
Start the
e calibration process fro
om Auto Aliignment or Erase for reecalibration of the
reader.
28
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
NOTE
E
Following the calibrration processs, two sets of four imagees used for
calibrattion and two calibration files
f are generated in loccal program
folder.
29
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
3. Screen
ns
3.1. Suppo
orted Re
esolution
ns
Landscape resolutions with 16:9, 4:3 a
and 5:4 ratio
os are supp
ported. Portrrait ratios arre not
suppo
orted. The horizontal resolution of the
e monitor mu st 1280 pixells, and the vertical
ust be at leas
resolu
ution of the monitor mus
st be at leasst 768 pixels
s. Recomme
ended resoluutions are lis
sted in
Table
e 3.1.
Table 3.1
S
Screen Ratio
o Sc
creen Resoluution
1366 x 7688
1280 x 8000
16:9 1400 x 9000
1600 x 9000
1920 x 10800
4:3, 5:4 1280 x 10244
3.2. Home
e
The H
Home screen
n is the first screen
s that
appears when the
e program is
s run. From
the H
Home screen, you can cre
eate a new
studyy or view exissting studies.
30
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
3.3. Navig
gation Ba
ar
The Navigation Bar
B is located at the b
bottom of the screen. The
T Navigatioon Bar is always
a
displa
ayed while th s running, al lowing the user to easily switch screeens during a task.
he program is
① ② ③ ④ ⑤
3.4. Studie
es
The S
Studies scre
een shows a collection
①
of w
windows that are relate
ed to the
②
studie an enter the Studies
es. You ca
③
scree g the Studies button in
en by clicking
the N ar. The Sub-Navigation
Navigation Ba
n the left of the screen.
Bar iss located on
he Sub-Navigation Bar, you can
In th
selecct a Study List, Work List or
ws that are related to
Transsport window
the sttudy. Figure 3.3. Studies Sccreen
31
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Figure 3.4.
3 New Stu
udy
3.6. Regio
on Selec
ction
In the
e Region Sellection scree
en, you can
selecct the region to scan and
d add it to
the Ta
Task List.
3.7. Patien
nt Inform
mation
The P
Patient Inform
mation Bar is displayed at the top off all the scre
eens, with thee exception of the
e screen and the New
Home w Study scrreen. The Patient
P Inforrmation Barr displays patient
p
inform
mation and other
o related information.
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
6. Patient In
Figure 3.6 nformation
① Patient Name
N
② Patient ID
32
Userr Manual
Quan
ntorVet Plus 22-EN
TM -72
3.8. Scan
In the
e Scan scre
een, you can insert a
casse
ette into the
e FireCR an
nd acquire
image
es.
Figure 3.7
7. Scan Screeen
3.9. Revie
ew
In the
e Review sccreen, you can query
scann
ned image
es in the identical
ner as the PACS Vie
mann ewer. The
Revie
ew screen is very useful
u for
ucting diagnosis after acquiring
condu
the im
mages.
Figure 3.8
8. Review S
Screen
33
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
4. Home Windo
ow
4.1. Scree
en Layou
ut
The H
Home scree
en is the firstt screen tha
at appears when
w the pro
ogram is runn. From the Home
scree
en, you can create a ne
ew study or view existing Y can go bback to the Home
g studies. You
scree
en by using one
o of the ac
ctions below.
③
① ②
④ ⑤ ⑥
① Model Name:
N Displays the mode
el name of FiireCR.
② Current Time: Curren
nt time is dissplayed in ho
ours and minu
utes.
③ System: Displays the
e System me
enu.
④ Create New
N G to New Sttudy screen.
Study: Go
⑤ Study List: Go to Stu
udy List scree
en.
⑥ n.
Work Lisst: Go to Worrk List screen
34
Userr Manual
Quan
ntorVet Plus 22-EN
TM -72
Figure
e 4.2. System
m Menu
35
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
5. New Study
S
5.1. Scree
en Layou
ut
The N
New Study screen
s is the
e first page w
when perforrming a scan
n. Enter the necessary patient
p
and sstudy informa
ation. You ca ext input field by using thhe Tab key. Fields
an easily sw itch to the ne
marked by * are mandatory
m DICOM fields that must be
e filled in.
① ② ③
Table
e 5.1. Input Field
Title
e Descriptio
on Mand
datory
Nam
me Enter pattient name. O
36
User Manual
37
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
① ②
⑤ ④
⑥ ⑦ ⑧
38
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
6. Region
n Selec
ction
6.1. Scree
en Layou
ut
In the
e Region Selection scree
en, you can sselect the reg
gion to scan and add it too the Task Lis
st.
⑥
①
② ⑤
⑦ ⑧
Figure 6
6.1. Region Selection
S
① Body Pa
art: The regio
on to be scan n the figure oof the animal body.
nned will be displayed on
When yo
ou move the
e mouse currsor over the
e figure, the region to bee selected will
w be
marked by a differen
nt color. Sele
ect the desire
ed region and
d the View P
Position List will
w be
updated.
② Species: Change th
he species. You can’t use
u this fun
nction after adding first View
Position
③ osition: Displays view po
View Po ositions thatt correspond
d with the seelected regio
on for
scanning
g. Click on th
he region to sscan and the
e region will be
b added to the Task Listt.
④ Preset: Displays
D view
w position p
presets. Whe
en a certain setting
s is useed frequently, you
can eassily automatic
cally add mu
ultiple view positions by selecting a preset inste
ead of
adding separate
s view
w positions e
each time.
⑤ Page Up
p/Down: Buttton for switch
hing pages.
⑥ Task List: List of view
w positions a
added from View
V Position or Preset fieelds.
39
User Manual
40
User Manual
Lateral Oblique
Medial Oblique
Knee Lateral
Dorsal
Lateral Oblique
Medial Oblique
Stifle Lateral
Elbow Lateral
Hock Dorsoplantar
Lateral
Lateral Oblique
Medial Oblique
Mandible Lateral
41
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
7. Scan
7.1. Scree
en Layou
ut
In the
e Scan scree
en, you can in
nsert a casse
ette into the FireCR and acquire imagges.
② ① ③
gure 7.1. Sc
Fig can
① Scan: Be
egin a scan.
② Stop: Sto
op a scan.
③ Erase: Erase
E P. By defaullt, the IP is deleted auttomatically aafter a scan. This
the IP
function is only used to manuallyy delete the IP.
④ Progresss: The scann
ning progresss is shown in
n a circle and
d in percentaages.
⑤ Resolution: Select th
he scan reso
olution. HD resolution sc
cans with 1000 mm pixel pitch,
and SD resolution scans
s at 200
0 mm pixel pitch. Lowe
er pixel pitchh results in higher
h
on images.
resolutio
⑥ Cassette
e Indicator: Displays
D the sstatus of the
e cassette.
⑦ Exposurre Input: Ente exposure settings.
er the X-ray e
⑧ Model Name:
N Displays the mode
el name of FiireCR connected to the P
PC.
42
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Table 7
7.1. Exposurre Input
Type kVp
p mA ms mAs
1 O O O Calculate
ed
automatically
2 O X X O
3 O O Calc
culated O
autom
matically
4 O Calculated O O
a
automatically
y
7.3. Casse
ette Indicator
The C
Cassette Indicator display
ys whether t he cassette is inserted and recognizeed correctly.
2. Cassette Indicator
Table 7.2
Indicator Status
A cassette
e is inserted
d, cassette size informa
ation is recoognized, butt the
current size
e has not be
een calibrated
d.
43
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
8. Image
e
8.1. Scree
en Layou
ut
When
n an IP scan
n has been completed, th
he acquired image is disp
played on thee Scan window as
show
wn in Figure 8.1.
8
① ③
Fig
gure 8.1. Ima
age
44
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
8.2. ROI
When
n a scan is completed,
c the image is displayed and the ROI Box of the ppredefined siize for
each scanned reg
gion is autom
matically disp own in Figurre 8.1. Whenn you drag the ROI
played as sho
Box tto the desire nd double-cl ick the ROI Box or click on the ROI button, the ROI
ed location an R is
cropp
ped and fitted
d to the scre
een as shown
n in Figure 8.2.
8 To adjustt the size of tthe ROI Box
x, drag
the sm
mall rectangles at each corner
c of the ROI. When transmitting or printing thhe image, on
nly the
ROI a
are used.
2. ROI Cropp
Figure 8.2 ped Image
8.3. Markin
ng
The Marking featture is used
d to add ma
arkings on th
he image. Markings
M cann be added to the
image ng a predefined marking o
e by selectin or manually typing
t in textt.
45
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
② S
Select a marrking.
③ C
Click on the image.
i
Prede
efined markkings can be edited in
Settin
ngs under [O
Overlay-Marking].
Fig
gure 8.3. Ad
dd Predefineed Markings
s
② S
Select Directt Input.
②
③ C
Click on the position wh
here you wa
ant
tto add the marking
m and
d a text inp
put
b
box will appe
ear. Enter yo
our text. Clicck
o
outside the text input box
b when yo
ou
a
are done.
Fig
gure 8.4. Ma
anually Enteer Markings
8.4. Rotate
e/Flip
Used
d to rotate or flip images.
Icon Action
Rotate
R Left
Rotate
R Right
Flip
F Horizonta
ally
46
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Flip
F Verticallyy
8.6. Retakke
Used
d when the quality
q of the
e scanned im
mage is insuffficient and requires
r a reescan. Reme
ember
that the current im
mage will be deleted.
8.7. Rejecct
When
n the quality of the scann erves the cu rrent image with a
ned image iss insufficient, Reject prese
“Reje
ect” marking without resc
canning. Wh ect button is clicked, a “R
hen the Reje Reject’ mark
king is
added on the upp
per left corne ge as shown below, and a “Reason” iinput field ap
er of the imag ppears
on th eason for rejjection, and click outside
he screen. Tyype in the re e the input bbox when yo
ou are
done. You can ca
ancel a rejecttion by clickin
ng the Rejec
ct button again.
Fig
gure 8.5. Rejject
47
Userr Manual
ntorVet Plus
Quan TM -72
22-EN
8.8. QA – LUT Cu
urve
Used
d to adjust th
he LUT Curv
ve of the im
mage. Adjusting the imag
ge requires expert know
wledge
aboutt images. Ad
djusting the im
mage withou owledge may result in low
ut proper kno wer image qu
uality.
①
① L
LUT Curve: LUT curve applied
a to th e image. A default curve
e for each re
region is provided.
T
The user can
n adjust the curve to the
eir preferenc
ce. To adjust the curve, sset a controll point
a
and drag the
e curve using
g the mouse.. To add a ne
ew control po
oint, click onn the line usin
ng the
m
mouse. A con
ntrol point ca ed by dragging it outside the box.
an be remove
② H
Histogram: Shows
S the histogram of th gion at the ceenter is the region
he image. The bright reg r
ccurrently disp
played on th
he screen. T
The left part of the histo
ogram indicaates the frequency
w
where X-ray penetration level is low
w and image is bright. The right partt of the histo
ogram
indicates the
e frequency where
w X-rayy penetration
n level is hig
gh and imag e is dark. Im
mages
h
have low pixe
el values in bright
b regionss and high pixel
p values in
n dark regionns.
③ W
Window Cen
nter / Width: Used to ad
djust the win
ndow center and width oof the image
e. The
w
window centter is adjuste
ed when yo
ou drag the image up or down, andd window wiidth is
a en you drag the image le
adjusted whe eft or right. Dragging
D the sliders has tthe same effect as
dragging the image.
d
48
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Window Width
W
W
Window Centerr
④ S
Set: Set the curve
c and wiindow value adjusted by the user as the default vvalue for imag
ges of
tthe current re
egion.
⑤ L a apply default curves and window values of the current reggion.
Load: Load and
⑥ R
Reset: Resett curve.
⑦ P G to Image Processing Filters scree
Processing: Go en.
49
User Manual
① Contrast: Increases the image’s contrast. The level can be adjusted from 0 to 10.
Higher levels increase the intensity. Filter is not applied when 0 is selected.
② Detail Contrast: Increases the contrast in regions of the image with low contrast. The
level can be adjusted from 0 to 10. Higher levels increase the intensity. Filter is not
applied when 0 is selected.
③ Edge Enhancement: Enhances edges. It is used to increase visibility of blood vessels
or small calcifications. The level can be adjusted from 0 to 5. Higher levels increase the
intensity. Filter is not applied when 0 is selected.
④ Edge Frequency: Designates the range of the edges to emphasize. The level can be
adjusted from 0 to 5. Lower level emphasizes the smaller edges. Higher levels
emphasize the bigger edges.
⑤ Latitude Reduction: Compresses the low frequency regions to improve the overall
visibility of the image. The level can be adjusted from 0 to 10. Higher levels increase
the intensity. Filter is not applied when 0 is selected.
⑥ Noise Reduction: Reduces the noise in the image. The level can be adjusted from 0 to
10. Higher levels increase the intensity. Filter is not applied when 0 is selected.
⑦ Set: Set the filter values adjusted by the user as the default value for images of the
current region.
⑧ Load: Load and apply filter values of the current region.
⑨ Reset: Reset filters.
⑩ LUT: Go to LUT Curve adjustment screen.
8.10.Send Image
Immediately transmits current image to the image server designated in Settings. If
[Network/Export – Options – Show Destination] is checked under Settings, a dialog box for
choosing the destination will be displayed as shown in Figure 8.8 and the user can designate a
destination.
50
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
8.11.Expossure Ind
dex
Expo
osure Index is an appro e dose that reaches thee image rec
oximate indiccator of the ceptor.
3DISC’s Exposure Index is ca
alculated by ffollowing equ
uation.
Unde e exposure conditions, the indicator and the dose are proportional. The
er the same
mmended EI value is betw
recom ween 1800 a
and 2200.
51
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
9. Task List
L
9.1. Scree
en Layou
ut
The T
Task List is a list of scans to be perrformed. Tas
sks are group by studiess, and arrang
ged in
chron der. The userr can select the desired region and perform
nological ord p a sccan. The Tas
sk List
o studies, and each stud
consiists of a list of dy consists of
o a list of tasks. The cheeck boxes lo
ocated
e right of the task bar is used
to the u to selecct tasks.
④ ⑤ ⑥
③
①
⑦
⑧
②
⑨
Figu
ure 9.1. Task
k List
① Study Bar:
B Displays
s study datte, study tim udy descriptiion. Only time is
me, and stu
displaye
ed for studies
s conducted on the same
e day. Only dates
d are dissplayed for studies
conducte
ed on any prrior dates.
② Task Bar: Displays th
humbnail ima
ages, body part,
p and view
w position.
③ Select all: Select all the
t tasks.
④ Add Preset: Add the selected stu
udy to the pre
eset. When added
a to the preset, the added
a
ed on the Pre
study will be displaye eset List in th
he Region Selection screeen.
⑤ Delete: Delete
D selectted tasks.
⑥ Edit: Sho
ow/hide Mov
ve and Switch
h buttons.
⑦ Send Study: Transm
mit the selecte
ed study. Destination of the transmisssion can be added
a
52
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
in Settings.
⑧ Print: Prrint the selectted images u
using a DICO
OM printer orr a Windows printer.
⑨ Stitch: Used
U to stitch
h multiple im ages into on g bones are sscanned. To stitch
ne when long
images, all the images must havve the identic
cal scan reso
olution. Imagges scanned in SD
resolutio
on and in HD
D resolution ccannot be stiitched. Up to
o three imagees can be stitched
into one.
⑩ Move: Change
C the order
o of the tasks. Chan
nge the orde
er of the tassk by pressin
ng the
Up/Down buttons.
⑪ Switch: Switch the images of tw
wo tasks. The
e button is only
o activateed when two tasks
are seleccted.
⑫ Page Up
p/Down: Buttton for switch
hing pages.
9.2. Stitch
The S
Stitch functio u the Stitcch function. When
on is optional. A Stitch Dongle is required to use
stitch
hing begins, a screen sho re 9.2 will be displayed on the screenn and the selected
own in Figure
image
es will be dissplayed vertically accord
ding to the order in the Task
T Bar. Whhen you adju
ust the
positiion and anglle of the ima
ages and be
egin stitching
g, the two im
mages will bee stitched intto one
and a
added to the Task List.
⑪ ⑫
Fig
gure 9.2. Stitch
53
User Manual
① Zoom: Used to zoom in and out of the image. Drag the mouse over the image to
control the zoom. It does not zoom in/out on a single image and zooms in/out on the
entire screen.
② Pan: Pan the image. Drag the mouse over the image to control the zoom. The selected
image pans separately.
③ Fit To Page Size: Adjust zoom to fit the image to the height of the screen.
④ Fit To Page Width: Adjust zoom to fit the width of the screen.
⑤ Clip: Show/hide clip adjustment line in the image. Clip lines are displayed as dotted
lines. Drag the dotted line using the mouse to clip the desired region.
⑥ Show Guide Line: Show/hide horizontal dotted line to check horizontal level of the
scanned image. The position of the guide line can be adjusted by dragging it using the
mouse.
⑦ Rotate Left: Rotate the selected image counter-clockwise.
⑧ Rotate Right: Rotate the selected image clockwise.
⑨ Rotate Angle: The angle to rotate the image.
⑩ Reset: Reset images.
⑪ Cancel: Return to the previous screen.
⑫ Stitch: Stitch images and return to the previous screen.
54
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
9.3. Print
Windows printerss and DICOM
M printers arre supported
d. The printe
ed page cann be preview
wed on
the le
eft part of the
e screen.
Figure
e 9.3. DICOM
M Print
Printer Type:
T Select printer type.
DIC
COM Printer
Win
ndows Printer
Layout: Select
S the la
ayout of the im
mage to be printed
p on film
m or paper.
Film Size
e: Select sta
andard DICO
OM film size.
8INxx10IN
10IN
Nx12IN
55
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
10IN
Nx14IN
8INxx10IN
11IN
Nx14IN
14IN
Nx14IN
14IN
Nx17IN
24C
CMx30CM
24C
CMx24CM
Orientation: Select film orientatio
on.
Porttrait: Uses po
ortrait orienta
ation.
Landscape: Use
es landscape
e orientation.
Destinattion: Select DICOM
D printe
er.
Print: Sta
art printing.
Stop: Sto
op printing.
Cancel: Close dialog
g box.
When
n a Window printer is selected, the sccreen change
es as shown in Figure 9--4.
Figure 9
9.4. Window
w Printer
56
User Manual
10. Review
10.1.Screen Layout
The View offers the identical functions as a PACS Viewer. It supports various image comparison,
processing and measurement tools for performing a diagnosis. The screen displaying the image
consists of multiple views. Each view consists of multiple images. The user can customize the
view layout and image layout according to their needs.
Image Image
View
Image Image
View View
To display an image in the view, all you have to do is simply drag the image from the Task Bar.
When an image is dragged from the Task Bar, only the image is displayed in the view. When a
Study Bar is dragged, all the images included the study are displayed in the view.
57
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
①
②
Figure 1
10.2. Review
w Screen
① View Ca
aption Bar: Th
he caption ba
ar of the view
w.
①
② Full Scre
een: Show th
he review scrreen in full-sc
creen mode.
③ View Window Layout: Change th
he layout of th
he view.
④ Zoom: Used
U to zoom ge. Drag the image left, right, up, or down
m in and outt of the imag
using the
e mouse.
⑤ Pan: Pan the image. Drag the im
mage left, righ wn using the mouse.
ht, up, or dow
⑥ Image Manipulation:
M Open imag e manipulatiion tools for rotating, flippping and inv
verting
images.
⑦ Measure
ement: Provid
des various measuremen
nt tools for measuring
m disstance and angle.
a
⑧ Marking: Provides marking
m tools..
⑨ File: Display DICOM file on the sscreen.
⑩ Tools: Provides other tools.
⑪ Apply: Designate
D the
e range in wh
hich image adjustments
a will
w apply.
10.
①
2.View Caption Bar ② ③ ④
Figure 10
0.3. View Ca
aption Bar
58
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
① Image Layout:
L Chan
nge image la
ayout. When
n you click on the Imagee Layout buttton, a
3x3 grid shown in Figure
F 10.4 w
will appear on
o the screen. Select yoour desired la
ayout.
The largest image la
ayout availab
ble 3x3.
② Page Up
p: Go back to
o the previou
us page.
③ Page Do
own: Go to th
he next page
e.
④ Close: Close
C all imag
ges.
10.3.Full Screen
S
Expands the Review screen to
o full-screen mode as sh
hown in Figurre 10.5.
59
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
10.4
4.Image
e Manipu
ulation
Icon Action
Rotate
R Left
Rotate
R Right
Flip
F Horizonta
ally
Flip
F Verticallyy
Reset
R image to initial statte
Negative
N ima
age
Fit
F to page sizze
Real
R size
10.5.Measu
urement
Icon Action
Distance
D
Angle
A
Rectangle
R
Ellipse
E
Polygon
P
60
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Free
F Draw
Pixel
P View
Profile
P
① Distance: Measures
M dis
stance. Clickk the start and
a
o the measurement. A straight line is
end point of
displayed between th
he two po
oints and the
t
measureme
ent value is displayed
d at the end of the
t
straight line
e. You can move
m the me asuring line by
dragging it. You can move
m either o
one of the tw
wo
control poin
nts by dragging them witth your mous
se.
You can also move th
he position o
of the meas
surement vallues by draggging it with
h your
mouse.
② Angle: Mea
asures angle
e. Click on th
he center po
oint
of the angle you wish to
t measure, and then click
on two control points. You
Y can movve both lines
s at
once by dragging. You can also m
move either one
o
of the two control pointts. You can also move the
t
position of the measurrement value
es by dragging
them with your
y mouse.
④ aws an ellips
Ellipse: Dra se. Click the
e mouse at the
t
desired possition where the top and left-most po
oint
pse would intersect, dra
of the ellip ag the mou
use
61
Userr Manual
ntorVet Plus
Quan TM -72
22-EN
⑤ olygon. A co
Draws a po ontrol point i s added eve
ery
time you cllick the mouse. Double-cclick when you
y
are done drawing
d the polygon. Cliick on an arrea
within the polygon to move it. Drrag the conttrol
points to ch
hange the corners of the polygon.
⑥ Creates a free
f draw se
election. Clic k and drag the
t
mouse to the desired shape.
s Relea
ase the mou
use
when you are awing. You ccan click inside
a done dra
the selectio he free draw selection.
on to move th
⑦ Measures pixel
p value. Click and d
drag the mou
use
and the coordinates (x, y) and pixe
el values (p)) of
the pixel at the cursor position
p be displayed on
will b
the screen.
62
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
⑧ Profile: Dra
aw a straightt line in the same manner as measu
uring a distaance, and a profile
dialog box will
w be displa
ayed automa
atically.
1
1. Distance
e: Distance between
b two points
2
2. Start Point: Start point informatio
on
3
3. End Poin
nt: End pointt information
4
4. Min: Min
nimum value
5
5. Max: Ma
aximum value
e
6
6. Mean: Average
A value
e
7
7. Current Value: Pixel value of the current position when th
he mouse waas clicked ov
ver the
graph
`
10.6.Markin
ng
Icon Action
Arrow
A
Text
T
63
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
10.7.File
Icon Action
Open
O DICOM
M File
Open
O Image File
Export
E as DIC
COM or imag
ge file.
10.8.Tools
Icon Action
Copy
C to clip
pboard: Cop
pies the acttive image tto the Wind
dows
clipboard.
c
Sets
S pixel sizze.
1. Scan a m
measuring to
ool with a determined lenggth.
2.
2 Select th
he scanned image and click
c on the Pixel Calibrration
button.
3.
3 The follo
owing dialog
g box will be
b displayedd on the screen.
Enter the
e actual length of the mea
asuring tool.
4.
4 Click on the start point of the mea
asuring tool oover the image
and startt dragging.
5.
5 Release the mouse at
a the end po
oint of the meeasuring tool to
complete
e the calibrattion.
64
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
This
T function shows smalll box on the image if youu click mouse left
button.
b Auto window is applied
a to th
his small boox area. You
u can
change
c box ssize if you mo
ove mouse with
w “Shift” keey down
10.9.Applyy Range
Sets the range in
n which imag
ge processin
ng will be ap
pplied. When
n comparingg two images
s, you
can a
apply the sam
me filters to both
b windowss for easier comparison.
c
Icon Action
Active:
A The i mage that was
w clicked last
l is the acctive image. The
active
a image is marked by
y an orange border.
Select:
S You ccan select mu
ultiple images by clickingg on images while
w
holding
h down cted images are marked by a
n the Ctrl key. The selec
blue
b border.
Study:
S Applie
es image filte
ers to all ima
ages in the sstudy that contain
th
he active ima
age.
All:
A Applies im
mage filters on
o all the ima
ages.
65
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
① ② ③ ④ ⑤ ⑥ ⑦
① Edit Colu
umn: Display ox for editing the columns
y a dialog bo s of the list.
② Today: Search
S only the
t studies frrom today.
③ Search: Search vario
ous criteria.
④ earch same patient’s stud
Filter: Se dy with the selected
s study’s patient.
⑤ Edit: Ediit the selecte
ed studies.
⑥ Delete: Delete
D the se
elected studi es.
⑦ New Stu
udy: Add a ne
ew study.
⑧ Region: Open the se
elected studyy and go to th
he Region Se
election screeen.
⑨ Scan: Open the sele
ected study a
and go to the Scan screen
n.
⑩ Review: Open the se
elected studyy and go to th
he Review screen.
⑪ Send Study: Transmit the selecte
ed studies.
⑫ Export: Export
E elected studi es to a CD, DVD or a loc
the se cal drive.
⑬ Page Up
p/Down: Go to
t another pa
age.
66
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
11.2.List
Sorting: When you click on the
e header off each colum
mn, the list is sorted by
b the
informattion in the selected colum
mn. The sorting order cha
anges every ttime the hea
ader of
the colum
mn is clicked
d.
Sort in asce
ending orderr
The ccolumns in th
he Study Listt are describe
ed in Table 11.1.
1
67
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
Sp
pecies Pa
atient speciess
Brreed Pa
atient breed
11.3.Edit Column
C
① ②
⑤ ④
⑥ ⑦
Figure
e 11.2. Edit Column
C
68
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
11.4
4.Searcch
① ② ③
① Filter: Se
elect the column to searrch. When a filter has not been set aand All is sele
ected,
all the co
olumns will be
b searched.
② Keyword
d: Enter the keyword
k to ssearch.
③ Search: Begin search.
11.5.Exporrt
② ③
④ ⑤
⑧ ⑨
69
User Manual
70
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
12.1.Scree
en Layou
ut
① ② ③ ④ ⑤ ⑥
① Edit Column: Display a dialog b ng the columns of the lisst. Using the Work
box for editin
List is identical to using the Studyy List.
② Today: Only
O query to
oday’s studie
es.
③ Search: Query variou Using the Work List is identical to usinng the Study List.
us criteria. U
④ Waiting: Display the list of studie s that have not
n been sca
anned yet.
⑤ Auto Query: Perform
m an auto que
ery at a preset time.
⑥ Import: Import selectted items to tthe Study Lis
st.
⑮ Region: Open the stu ect and go to the Region Selection sccreen.
udies to sele
⑦ Scan: Open the sele and go to the Scan screen
ected study a n.
⑧ Page Up
p/Down: Go to
t another pa
age.
71
User Manual
12.2.List
Columns in Work List are described in Table 12.1.
Table 12.1
Column Title Description
Sch. Date Scheduled date
Sch. Time Scheduled time
Mod Modality
Name Patient name
ID Patient ID
Sex Patient sex
Birth Patient birth date
Age Patient age
Station AE Station AE title
Station Station
Proc. Desc Scheduled procedure description
Proc.ID Scheduled procedure ID
Study UID Study instance UID
Acc. No. Accession number
72
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
13.. Transp
port
In the
e Transport screen, you can check the transmis
ssion results
s of images sent to an image
er or a DICOM printer.
serve
13.1.Scree
en Layou
ut
① ② ③
① Today: Search
S only the
t studies frrom today.
② Search: Search vario
ous criteria. S
Search meth
hod is identic
cal to Study LList.
③ Delete: Delete
D selectted items.
④ Page Up
p/Down: Go to
t another pa
age.
13.2.List
olumn Title
Co De
escription
Da
ate Se
end date
Tim
me Se
end time
La
ap Du
uration in secconds
73
User Manual
74
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
14.. Setting
gs
14.1.Scree
en Layou
ut
The S
Setting scree
en consists of
o a main cattegory, sub-c
category, and
d specific ite m. Clicking on
o the
main category ite ms. Clicking on the sub--category ite
em will change the sub-ccategory item em will
chang
ge the speccific item in the
t selected sub-category. Setting values
v can bbe changed in the
speciific item.
① ② ③
14.2. Gene
eral
14.2
2.1. Opttion
Name
e Descrip
ption Default Value
Colorr of ROI Set the
e color of th
he ROI Box
x. Click on the
t item to Green
75
User Manual
Name Description
Institution Name Set hospital name. The entered value will be included in DICOM
information.
Dept. Name Set the department name where the system is installed. The entered
values will be included in the DICOM information.
14.3.Fonts
14.3.1. Common
76
User Manual
14.3.2. Marking
14.3.3. Printer
77
Userr Manual
Quan
ntorVet Plus TM -72
22-EN
14.4
4.Netwo
ork/Expo
ort
14.4
4.1. Ima
age Serve
er
Mana
ages list of DICOM
D serve
ers for transm
mitting image
es to.
① Add: Add
d an image server.
s
Name Desscription
Calling
g AE Title Set AE title of Quantor.
Q
Called AE Title Set AE Title of im
mage serverr.
IP Add
dress Ima
age server IP
P address
Port Ima
age server po
ort
Description Ima
age server de
escription
② Edit: Ed
dit selected server. An identical scrreen as add
ding an imaage server will
w be
displaye
ed.
③ Delete: Delete
D the se
elected serve
er.
78
User Manual
④ Network Test: Check the connection by sending DICOM Echo to the selected server.
⑤ Move Up: Move the selected server up.
⑥ Move Down: Move the selected server down.
⑦ Timeout: Drop the connection when responses are not received within the set amount
of time.
Check boxes for each item will automatically be activated once a server is added. Quantor
sends images to all checked image servers according to the order on the list.
Manages Work List servers. Management method is identical to that for image servers. Multiple
Work List servers can be added, but only one can be checked.
Manages DICOM Printers List. Management method is identical to that for image servers.
Unlike adding image servers, the following additional settings are required when adding DICOM
printers.
79
User Manual
10INX14IN
11INX14IN
14INX14IN
14INX17IN
24CMX30CM
24CMX24CM
Polarity NORMAL NORMAL
INVERTED
Magnification REPLICATE BILINEAR
BILINEAR
CUBIC
NONE
Border BLACK FALSE
WHITE
Empty BLACK FALSE
WHITE
Min FALSE
Max FALSE
Image Box Bits Used 8 8
12
Check boxes for each item will be automatically activated once a server is added. Quantor
sends images to all checked servers according to the order on the list.
14.4.4. Options
80
User Manual
14.5.Work List
14.5.1. Work List
14.6.Overlay
14.6.1. Marking
This section can be used to edit pre-defined markings when adding markings to images in the
Scan screen. After entering text in the input field, you can perform the following actions:
Set the margins when markings are automatically added to an image. Each setting value shows
margins by % compared to the width and height of the image.
81
User Manual
14.7.System
14.7.1. Exposure Input
Allow scan values to be entered in the Scan screen. If you choose “Do not use”, the value is not
displayed on the image.
82
User Manual
14.7.4. Date
83