Professional Documents
Culture Documents
ATO PWM Solar Charge Controller User Manual
ATO PWM Solar Charge Controller User Manual
ATO PWM Solar Charge Controller User Manual
124mm
70mm
50mm
This controller is suitable for lithium batteries and all kinds of lead-acid
Load icon slow flashing Over load Reduce load watt
batteries (OPEN, AGM, GEL) .
Load icon slow flashing Auto reconnect
Bettery too low reverse Check bettery/connection
5. The controller will be hot when running. Please note that the controller is installed
on a flat, well ventilated surface.
℃
133*70*35mm/140g
Undervoltage
protection
Attn: Email: sales@inverter.com
Connect the battery to the charge regulator-plus and minus.
1. press the[DOMN] button to ON/OFF load manully at main display.
2. The work mode is working as below. Tel: +1 800-585-1519
Connect the photovoltalc module to the regulator-plus and minus. [OH] Dusk to dawn [24H] load output 24 hours Web: www.inverter.com
Connect the consumer to the charge regulator-plus and minus. [1-23H] load on after sunset and close after setting hours.