Professional Documents
Culture Documents
Section 04 05 16 - Masonry Grouting Part 1 - General
Section 04 05 16 - Masonry Grouting Part 1 - General
Section 04 05 16 - Masonry Grouting Part 1 - General
PART 1 - GENERAL
1.1 SUMMARY
B. Related Requirements:
1. Section 04 20 00 - Unit Masonry: Installation of grout.
B. ASTM International:
1. ASTM C94 - Standard Specification for Ready-Mixed Concrete.
2. ASTM C143 - Standard Test Method for Slump of Hydraulic-Cement Concrete.
3. ASTM C150 - Standard Specification for Portland Cement.
4. ASTM C404 - Standard Specification for Aggregates for Masonry Grout.
5. ASTM C476 - Standard Specification for Grout for Masonry.
6. ASTM C595 - Standard Specification for Blended Hydraulic Cements.
7. ASTM C618 - Standard Specification for Coal Fly Ash and Raw or Calcined Natural
Pozzolan for Use in Concrete.
8. ASTM C1019 - Standard Test Method for Sampling and Testing Grout.
9. ASTM C1157 - Standard Performance Specification for Hydraulic Cement.
10. ASTM C1314 - Standard Test Method for Compressive Strength of Masonry
Prisms.
1.3 SUBMITTALS
C. Test and Evaluation Reports: Submit compliance with grout property requirements
according to ASTM C476, component grout materials according to ASTM C476, and test
and evaluation reports according to ASTM C1019.
B. Inspection: Accept materials on Site in manufacturer's original packaging and inspect for
damage.
D. Protection:
1. Protect materials from moisture and dust by storing in clean, dry location remote
from construction operations areas.
2. Provide additional protection according to manufacturer instructions.
PART 2 - PRODUCTS
A. Manufacturers:
1. Glen-Gery Corporation
2. Lafarge North America, Inc.
3. Lehigh Hanson
4. Substitutions: As specified in Section 01 61 00 - Product Requirements.
2.2 MATERIALS
2.3 MIXES
A. Grout:
PART 3 - EXECUTION
3.1 EXAMINATION
3.2 INSTALLATION
A. Mixing:
1. Transit-mixed grout - Mix grout according to ASTM C94, as modified to use
ingredients complying with ASTM C476.
2. Site-mixed grout - Thoroughly mix grout ingredients in quantities needed for
immediate use according to ASTM C476.
3. Add admixtures and mix uniformly.
B. Testing:
1. Mix: Comply with ASTM C1019 for compressive strength, and comply with ASTM
C143 for slump.
2. Compressive Strength of Mortar, Grout, and Masonry: Comply with ASTM C1314.
END OF SECTION 04 05 16