‘VSL
BARE BATTEN
Bare channel series is designed for general purpose pplications,
‘with main emphasis on relabilly robustness and versal.
+ Heavy gauged fully welded construction and dietormed
+ Metal End Caps for absolute batten rgicity
+ BESA fixing holes for easy mounting
+ Picture shown efor iustration purpose any
DESCRIPTION
Ordering Mod: Cn L (om) cn ey
GLC 1200 E/MMLED/S 82 610 7” ton
GLC 140 EMLEDIS 82 1220 7% txar
GLC 2207 EMTHILEDIS 105 610 81 xan
GLC 240/LEM/THILEDIS 105 1220 a 2x at
GLC 120NS/LED 44 610 ot tx2n
GLC 40mS/LED 44 1220 64 tate
Le Z20NSTH/LED 105 610 n 2xzn
LO 240NSTHILED 105 1220 n 2xat
GLC 120/91/LED 54 610 83 tar
ic 140/910 54 1220 82 txae
tc 158/910 54 1520 cy txsr
Lc 220/01/THILED 105 610 %0 axcn
Glo 240/917THILED 4105 1220 90 2xat
GLC 258/91/THILED 105 1520 80 2xst
“ LEDITE = One End (LN), One End (short circuit) LED tube wirng
~* /LED/2E = One End (L), One End (N) LED tube wiring
™ /LEDISE = Single End (L-N), another End (open circuit) LED tube wiring
PROFILEPHOTO.
LEM Series NS Series 91 Series
Body Height: 38mm Sody Height: 28mm Body Height: 47mm
Fitting with starter holder Sim Fitting ‘Thicker Body Fiting
ed
Housing Heavy gauge sheet steel body with fully welded end-cap
Surface Finishing ‘White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved materialVSL
DDE cy
DIFFUSED BATTEN
All the convenience and performance of a batten with prismatic
‘controller, but ina single pack. Featuring the unique cover plate
reflector that integrates wit prismatic controler to provide a clear
Appearance with no gaps to allow debris and insects to enter,
* PRISMATIC DIFFUSER
+ Picture shown efor istration purpose any
DESCRIPTION
Ordering Mod Cn L (om) cn ey
Gop 120/93/LE0 62 22 ey txon
Gop 140/91/L.E0 8 1230 %3 txan
Gop 158/91/LE0 6 1590 ey txsh
Gop 220/91/LE0 125 022 100 axon
Gop 240/916 125 1230 100 2xatt
Gop 258/91/LE0 125 1590 100 2xst
* JLEDITE = Ono End (LN), Ono Ena (shert crt) LED tube wing
~ /LEDI2E = One End (), One End (N) LED tube wing
* /LEDISE = Single End (LN), another End open crit) LED tube wiring
PROFILE
w
Data
Housing Heavy gauge sheet steel body with PC end-cap_
Optical Prismatic diffuser
Surface Finishing White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, WDE safety approved materialVSL
TRIANGULAR BATTEN
“Tiangular T8 batten provides wide and general distribution of light.
Itis an architectural interpretation ofthe twin bare batten by incorpo-
rating a refreshing Tiangularprofle. These fitings are especialy
suitable for open space itumination as in car parks, walkways &
assembly halls
+ Picture shown efor iustratien purpose any
DESCRIPTION
Cn L (om) cn ey
GTF 220/10 135 oa 70 2x2e
TF 240/LED 135 1225 7 axa
GGTF 220/ARMLED 135 618 70 2x2r
GT 240/ARMLED 195 1225 70 2xate
oa
~ JLEDINE = One End (L-N), One End (short ict LED tube wiring
~ JLEDI2E = Ono End (), One End (N) LED ube wirng
~ LEDISE «Single End
uminsum Relator cover
another End (open eet LED tube wiring
PROFILE
x=
|—__¥ __.}
ey
Housing Heavy gauge sheet steel body with fully welded end-cap
‘Surface Finishing ‘White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved material‘VSL
eM eR ns)
WIRE GUARD BATTEN
Wire guard fting is designed and equipped with rugged wire guar
‘mesh to address the problem of vandalism and breakage. Hence,
ensuring general ilumination for everyone's safety and convenience.
+ Picture shown efor iustratin purpose any
DESCRIPTION
Ordering Mod: Cn L (om) cn ey
Gwe 120/917LED 62 622 83 ton
awe 140191710 6 1230 93 txar
ewe 220/91/LED 125 oz 100 xan
Gwe 290/91/LE0 125 1290 100 2x at
‘awe 120/160 100 610 105 tron
Gwe 140/0L/LED 100 1220 105 tate
awe 220/010 100 610 105 2xzn
awe 240/0L/60 100 1220 105 2xat
(Gwe 120/PL/LED 100 610 405, txan
Gwe 140/PU/LED 100 1220 40s txae
Gwe 220/PL/LED 100 610 105 2x2t
Gwe 240/PLLED 100 1 105 2xat
* JLEDIYE = One End (LN), Ono Ea (short cet LED tube wiring
~ /LEDI2E « One End (4), One End (N) LED ube wirng
* /LEDISE = Single Ena
PROFILE
91 Series CUPL SeriesPHOTO.
End Cap Cover J0L= Cam Lock (PL = Pad Lock
ed
Housing Body Heavy gauge sheet steel body
Housing Cover Wire mesh cover
Surface Finishing ‘White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved material‘VSL
Cerne sy
WALL WASHER LIGHT FITTING
For directional ilumination, wall washer fiting provides an effective
wall wash effect with exceptional lamp shielding. Harnessing the
power of single or twin lamps, these fitings utlise a precision formed,
Teflector optic that delves high levels of vertical ilunination and
‘washes walls with shadow free light from the celing to the floor.
Highly appropriate in retail areas requirng excellent illumination of
sholves and wall displays to maximise sales and achieving optimum
point-of-sales success.
+ Picture shown efor istration purpose any
DESCRIPTION
Ordering Mod 2 (mm) eT fd ey
@ww 120/LLED -/298 598/625 103 1x2
aww 140/AL/LED -/298 1208 /1235 103 teat
GW 220/L/LED 1298 598/625 128 2x2n
Gww 240/ALLeD = 1298 1208 / 1285 128 2xat
‘GW 120/8SUMED ~/294 625/625 68 txan
GW 140/SULED 1298 1295/1285 68 1x4
eww 220SuED - 1294 628/625 103 2x2n
ww 2¢0/SuRED “1294 1235/1235, 4103 2xan
GW 1207E/LED 294/324 625/655 68 tan
@ww 40RD 298/324 1205/1265 66 tat
aww 220m /ED 294/324 625/655 108 axon
ww 240RE/LED 294/324 1295) 1265 103 2xat
* JAL = Far Recessed (imperil size)
+ SU = Surface Mounted
* (RE =Plastor Recessod
~ LED/IE = One End (LN), One
* JLEDIZE = Ono End (4, One End (N) LED tube wiring
~ /LEDISE = Single End (L-), another Er open cru) LED tube wiing
shor ereut| LED tube wingPROFILE
ca
Data
Housing
Optical
Surface Finishing
Lamp Holder
Wire
‘Connector
Heavy gauge sheet steel body wit fully welded end-cap
‘Anodized aluminum reflector
‘White epoxy powder coated & oven baked
Polycarbonate housing with Copper plate contact
Heat resistance 105°C, SIRIM approved material
UL, VDE safety approved materialVSL
errr a}
WEATHERPROOF FITTING
GCR Series is an IP6S rated range of weather resistant tings
especialy suitable for installation in adverse environment where
dit, dust and moisture prevailed. These rugged and handsomely
designed fitings provide eficient and functional lumination even
inharsn, humia and dusty conditions.
+ Picture shown efor iustratien purpose any
DESCRIPTION
Ordering Cn L (om) i) ey
Gor 12010 +10 670 +10 tx2R
Gon 140/00 110 1270 110 txar
Gor 220160 160 670 110 xan
Goa 2n0/LeD 160 1270 +10 2x at
~ JLEDIYE = One End (LN), One En (short eeu) LED tube wiring
/LEDIZE = One End (Ly, One End (N) LED tube wing
~ MLEDISE = Single End 1 (opan cult) LED tube wing
PROFILE
on
Housing Polycarbonate Body
Optical Polycarbonate Cover
tip Stainless stee! material
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved materialVSL
Neer}
CLEAN ROOM FITTING
For production in special environment conditions, Clear Room Fitting
‘are Specially designed to meet such demanding manufacturing
requirements through the emphasis on high rgiity constructions
‘and meticulous fabrication workmanship,
‘Application includes pharmaceutical places, food processing
industries, precision engineering and sem:conductor assembly
plants.
+ Picture shown efor iustratien purpose any
DESCRIPTION
Cd err) H (om) ey
GAC 1202/CRILED 200 598/615 120 1 x2n
GAC 2212/0R/LED 298 598 /615 120 2x2k
ac 2222/CRILED 603 598/615 120 2x an
ac s222/CRILED 08 598/635 120 axon
GAC azz2/CR/LED 608 598/615 120 axan
GAC 1414/0R/LED 298 1208 / 1225 120 tae
ac 2414/CRILED 208 1208/1225 120 eat
GAC 2424/0R/LED 603 1208 / 1228 120 2xatt
GAC 3424/0R/LED 608 1208 1205 120 Sxan
GAC 4424/CRILED 60a 1208 / 1206 120 xan
* Customised cimensions avalable upen request, exp: /SU,/RE, MM
~ /LEDIIE = One End (L-N, One En (short cut) LED tube wiring
* JLEDIZE = One End (4, One End (N) LED tube wirng
~ /LEDISE = Siogle End (-N), another End open cul) LED tbe whing
PROFILE
[eee oy
al Data
Housing Heavy gauge sheet steel body & IPS4 rated
Optical Prismatic difuser (other options available)
Surface Finishing White epoxy powder coated & oven baked
Lamp Holder Polycarsonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved material
10VSL
CNRS}
DIFFUSED CEILING LIGHT FITTING
Diftused ceting ight iting is equipped with framed prismatic
diffuser. This luminaire is designed for efficient, economical and.
no fils ilumination of interior spaces and thus biends into the
environment efforessly.
‘Avallable in different size options to suit surface and recessed
‘mounted cellngs.
All louvres are located by posi-bolt which allowed them to swing
‘down for luminalre maintenance.
+ Picture shown efor istration purpose any
DESCRIPTION
Ordering Model Cn /L2 (men) H (rom)
GAC 1202/AL/LED 200 598/610 70 txat
GAC 2212/AULED 208 598/610 70 axon
GAC 2222/ALILED 603 598/610 70 2x2tt
GAC 3222/AL/LED 60a 598/610 70 Sx2tt
GAC 4222/ALILED 60a 598/610 70 axon
GAC 1414/ALILED 298 1208/1220 0 txatt
GAC 2414/AL/LED 208 1208/1200 70 2xatt
GAC 2424/ALILED 60a 1208/1200 10 2xat
GAC 3424/ALLED 603 1208/1220 7 Sxatt
GAC 4424/ALILED 60a 1208/1220 70 axa
GAC 1202/AUMMVLED 200 595/610 70 ton
GAG 2212/ALMIVLED 295 595/610 7 2x2tt
GAC 2222/AL/MMVLED 595 595/610 70 2x2
GAC 3222/AU/MMVLED 595 595 /610 70 3x2
GAC 4222/ALMMWVLED 595 595/610 7 4x2t
GAC 1414/ALMMLED 295 1195/1220 70 tate
GAC 2414/AUMVLED 295 1195/1200 70 2xat
GAC 2424/AUMIVLED 595 1195/1220 0 2x an
GAC 3424/AL/MILED 595 1195/1200 70 sxan
GAC 4424/AU/MMVLED 595 1195/1200 70 axant
* (AL = Tar Recessed fmperial sa)
* IALNN = bar Rose (rattle #20)
* /LED/XE = One End (LN), One End (shert crt LED tube wing
~ LEDIZE « One En (\), One En (N) LED tube wirng
* JLEDISE = Single End (LN, another End open cut) LED tube wiingPROFILE
Housing
Optical
Surface Finishing
Lamp Holder
Wire
Connector
Heavy gauge sheet steel body wit fully welded end-cap
Prismatic diftuser (other options available)
White epony powder coated & oven baked
Polycarbonate housing with Copper plate contact
Heat resistance 105°C, SIRIM approved material
UL, VDE safety approved material
2VSL
CNRS}
DIFFUSED CEILING LIGHT FITTING
Diftused Ceiting light iting is equipped with framed prismatic
diffuser. This luminaire is designed for efficient, economical and
no fils ilumination of interior spaces and thus biends into the
environment efforessly.
‘Avallable in different size options to suit surface and recessed
‘mounted cellngs.
All louvres are located by posi-bolt which allowed them to swing
‘down for luminalre maintenance.
+ Picture shown efor istration purpose any
DESCRIPTION
Ce Cn) L (mm) Ca ey
GAC 1202/SU/LED 200 65 0 ton
GAC 2212/SU/LED 300 615 °0 2x2t
GAC 2222/SU/LED 605, 615 20 2x2n
GAC 2222/SU/LED 605, os 80 axon
Gac 4222/SU/LED 605, ois 20 x2t
GAC 1414/SU/LED 00 1208, °0 tat
Gac 2614/sUiLED 300 1205 20 2xat
GAC 2424/SU/LED 605, 1205 °0 2xatt
GAC 3424/SU/LED 605, 1205 %0 axat
GAC 4424/SUNLED 60s, 1205 90 seat
+ /SU= Surface Mounted
~ LED/NE = One End (LN), One Ea (shot ert LED tube wring
* LEDIZE = One End {L), One End (N) LED tubo wiring
~ /LEDISE = Single Ens (L-M), another End open ereut) LED tbe wiring
PROFILE
(Ecocooo eee CeCe) fee Eee
Technical Data
Housing Heavy gauge sheet steel body wit fully welded end-cap
Optical Prismatic difuser (other options available)
Surface Finishing White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, WDE safety approved material
1VSL
CNRS}
DIFFUSED CEILING LIGHT FITTING
Diftused ceting ight iting is equipped with framed prismatic
diffuser. This luminaire is designed for efficient, economical and.
no fils ilumination of interior spaces and thus biends into the
environment efforessly.
‘Avallable in different size options to suit surface and recessed
‘mounted cellngs.
All louvres are located by posi-bolt which allowed them to swing
‘down for luminalre maintenance.
+ Picture shown efor istration purpose any
DESCRIPTION
Ordering Mod enn) Prt H (mm)
GAC 1202/RE/LED 200/240 615/650 96/94 tx ar
GAC 2212/REMED 288 /330 615/650 26/94 2x 2k
GAC 2222/RE/LED 591/650 615/650 86/98 2x2
GAC 3222/REMLED 591/600 615/650 26/94 ax2t
GAC 4222/REMLED 591/630 615/650 86/98 axon
GAC 1414REMLED 288/330 1225/1258 26/96 txae
GAC 2414 REED 288/300 1225/1258 86/96 2xat
GAC 2424/REMED 591 /630 1225/1258, 86/96 2xat
GAC 3424 REMLED 591/650 1225/1258 86/98 axa
GAC 4¢24/REMLED 501/630 1225/1258 86/06 scat
+ RE =Plaster Recessed
~ /LED/XE = One En (LN), One En (short cet LED tube wien
* JLEDIZE = Ono End (4, One End (N) LED tube wiring
~ LEDISE = Single End LN, another Er open eet) LED tube wing
PROFILE
. ra 5 a
{| | |
=
Housing Heavy gauge sheet steel boo with aly welded end-cap
Optical Prismatic difuser other options availabe)
Surface Fishing Whe epoxy power coated & oven baked
Lamp Heider Plyearbonate housing wth Copper plate contact
Wire Hest resistance 105°C, SIRIM approved meter
Connector UL, VDE safety approved material
4VSL
ead
TOP MIRROR LOUVRE FITTING
“Top miror louvre fiting with specular reflector & ribbed crossvanes is
‘optimally designed to mast the lighting requirements of retail outlets,
office buildings and supermarkets,
‘Available in different size options to suit surface and recessed
‘mounted celings.
All louvres are located by posi-bolt which alowed them to swing
‘down for luminaire maintenance,
+ Picture shown efor istration purpose any
DESCRIPTION
Ed Cn err or)
GM 1202/AL/LED 200 598/610 70 xan
OM 20 2/AL/LED 208 598/610 70 2xon
GM 2222/AL/LED 603, 596/610 70 2x2k
MF a222/AL/LED 003 598/610 70 axar
GM 4222/AL/LED 608 598/610 70 Axor
GM 1414/AULED 298 1208/1220 70 tx ar
GMF 26;4/ALILED 298 1208/1220 70 2xate
MF 2424/ALiLED 603 +1208 11200 70 2x at
GM s424/AL/LED 608 1208/1220 70 Sxar
GM 4424/ALiLeD 003 1208/1220 70 axa
GME 1202/AL/MM/LED 200 595/610 70 tat
GM 2212/AL/MM/LED 295, 595/610 70 2x or
GME 2222/AL/MM/LED 595, 595/610 70 2x2k
GMF 3222/AL/MM/LED 595 595/610 70 3xar
GM 4222/AL/MM/LED 595, 595/610 70 axon
GM 1414/AL/MM/LED 295 4995/1220 70 tae
GME 2414/AL/MM/LED 295, 1195/1220 70 2xat
GM 2424/AL/MM/LED 595 1195/1220 70 2x
MF S424/AL/MM/LED 595, 4995/1220 70 axa
GM 4a2a/aLsnawsLeED 595 1395/1200 70 axe
* (AL = Tar Recessed fmperial sa)
* IALNN = bar Rose (rattle #20)
* /LED/XE = One End (LN), One End (shert crt LED tube wing
~ LEDIZE « One En (\), One En (N) LED tube wirng
* JLEDISE = Single End (LN, another End open cut) LED tube wiing
16PROFILE
w
Heavy gauge sheet steel body wit fully welded end-cap
‘Anodized aluminum reflector
‘Surface Finishing ‘White epony powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
‘Connector UL, VDE safety approved material
16VSL
ead
TOP MIRROR LOUVRE FITTING
“Top miror louvre fiting with specular reflector & ribbed crossvanes is
‘optimally designed to mast the lighting requirements of retail outlets,
office buildings and supermarkets,
‘Available in different size options to suit surface and recessed
‘mounted celings.
All louvres are located by posi-bolt which alowed them to swing
‘down for luminaire maintenance,
+ Picture shown efor istration purpose any
DESCRIPTION
Ce Cn) L (mm) Ca ey
‘GME 1202/SU/LED 200 65 0 ton
GM 2212/SUILED 300 615 °0 2x2t
‘GMF 2222/SUILED 605, 615 20 2x2n
GME 2222/SUILED 605, os 80 axon
CGM 4222/SUILED 605, ois 20 x2t
GME 1414/SUILED 00 1208, °0 tat
GME 2614/SUILED 300 1205 20 2xat
Gv 2424/SU/LED 605, 1205 °0 2xatt
CGM 2424/SUILED 605, 1205 %0 axat
CGM 4424/SUILED 60s, 1205 90 seat
+ /SU= Surface Mounted
~ LED/NE = One End (LN), One Ea (shot ert LED tube wring
* LEDIZE = One End {L), One End (N) LED tubo wiring
~ /LEDISE = Single Ens (L-M), another End open ereut) LED tbe wiring
PROFILE
[ 1 ff
a
Housing Heavy gauge sheet stoel body with fully welded end-cap
Optical ‘Anodized aluminum reflector
Surface Finishing White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved material
7VSL
ead
TOP MIRROR LOUVRE FITTING
“Top miror louvre fiting with specular reflector & ribbed crossvanes is
‘optimally designed to mast the lighting requirements of retail outlets,
office buildings and supermarkets,
‘Available in different size options to suit surface and recessed
‘mounted celings.
All louvres are located by posi-bolt which alowed them to swing
‘down for luminaire maintenance,
+ Picture shown efor istration purpose any
DESCRIPTION
Che Ca eer Pen)
GMF 1202/RE/LED 200/240 618/650 86/94 1x2
GME 2212/RE/LED 288 / 330 615/650 86/94 axot
(GMF 2222/RE/LED 591/630 615/650 36/94 2xot
GMF 2222/RE/LED 591/620 615/650 86/94 axon
GME 4222/RE/LED 591/630 615/650 36/94 axon
GMF 1414/RE/LED 288/330 1225/1258 36/94 tate
GMF 2414/RE/LED 288 / 330 1225/1258 86/94 2xatt
GME 2424/RE/LED 591/630 1225/1258. 86/94 axatt
GMF 3424/RE/LED 591/630 1225/1258 86/94 xatt
GMF £424/RE/LED 591/620 12251258 26/94 axatt
taster Recessed
(One End L-N), One Er (short ret) LED tbe wing
LEDI2E = One En (}, One End (N) LED tube wiring
~ LEDISE «Single End (LN, another Er open cult) LED tube wiing
PROFILE
a
Housing Heavy gauge sheet steel bady wit fully welded end-cap
Optical ‘Anodized aluminum reflector
‘Surface Finishing ‘White epony powder coated & oven baked
Lamp Holder Polycaronate housing with Copper plate contact
Wire Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved material
18VSL
saa}
DOUBLE MIRROR CROSS-VANE LOUVRE FITTING
Double miror cross-vane louvre fiting presents @ fresh approach to
fulfil your lighting requirements. I's design concept of double miror
lamellae intergrated with curved reflectors enables excellent
reflective characteristics,
‘Avallable in cifrent size options to suit surface and recessed
mounted collngs
All louvres are located by posi-bolt wich alowed them to swing
down for luminaire maintenance.
+ Picture shown efor iustration purpose any
DESCRIPTION
Ordering Model W (mm) Pet Eran)
GMM 1202/AL/LED. 200 598/610 7 4 xatt
GMM 2212/AU/LED. 298 598/610 70 2xatt
GMM 2222/AU/LED. 603 598/610 70 2xatt
GMM 3222/AL/LED. 603 598/610 70 xa
GMM 4222/AL/LED. 603 598 /610 70 xan
GMM 1414/AU/LED. 298 1208/1220 7% txt
GMM 2414/AU/LED. 208 4208/1220 0 2xatt
GMM 2424/AU/LED. 603 1208/1220 70 2xatt
GMM 3424/AL/LED. 603 1208 / 1220 0 Sxatt
GMM 4424/AL/LED. 603 1208/1220 70 4xatt
GMM 1202/AL/MIWV/LED 200 595/610 70 1 xatt
(@MM 2212/ALIMMVLED 295 595/610 70 2xatt
Gaim 2222/AL/MM/LED 595 595/610 70 2xatt
GMim 3222/AU/MIM/LED 595 595/610 70 axatt
(GMM 4222/ALIMM/LED 595 595/610 cy xan
GMM 1414/ALIMM/LED 295 1198/1220 7 teat
GMM 2414/AL/MM/LED 295 1195/1220 70 2xatt
GMM 2424/AUMM/LED 595 1195 / 1220 70 2xatt
GMM 3424/AUMM/LED 596 1195/1220 70 axatt
GMM 4424/AUIMIM/LED 595 1195/1220 70 4xatt
+ (AL = Har Recessed (imperil is)
* IAL = bar Recessed (rete size)
* /LED/XE = One End (LN) One End (short ert} LED tube wiring
LEDIZE » One End (\, One Ena (N) LED tube wing
JLEDISE = Single End (L-N), another End open cuit) LED tbe wiring
19PROFILE
Heavy gauge sheet steel body with fully welded end-cap
‘Anodized aluminum reflector
‘White epoxy powder coated & oven baked
Polycarbonate housing with Copper plate contact
Heat resistance 105°C, SIRIM approved material
UL, WDE safety approved material
20VSL
CSG}
DOUBLE MIRROR CROSS-VANE LOUVRE FITTING
Double miro cross-vane louvre fitting presents @ fresh approach to
full your lighting requirements. I's design concept of double miror
lamellae intergrated with curved reflectors enables excellent reflec
tive characterstic,
‘Avallable in different size options to suit surface and recessed
‘mounted cellngs.
All louvres are located by posi-bolt which allowed them to swing
‘down for luminalre maintenance.
+ Picture shown efor istration purpose any
DESCRIPTION
Ce Cn) L (mm) Ca ey
‘Gun 1202/SULED 200 65 0 ton
Gv 2212/SULED 300 615 °0 2x2t
(GM 2222/SUILED 605, 615 20 2x2n
evn a222/SUNLED 605, os 80 axon
‘ava 4222/SUILED 605, ois 20 x2t
Gund 1414/SUILED 00 1208, °0 tat
GM 2ata/SuILED 300 1205 20 2xat
(Gv 2426/SUILED 605, 1205 °0 2xatt
Guat s426/SUiLED 605, 1205 %0 axat
vine a424/SUILED 60s, 1205 90 seat
+ /SU= Surface Mounted
~ LED/NE = One End (LN), One Ea (shot ert LED tube wring
* LEDIZE = One End {L), One End (N) LED tubo wiring
~ /LEDISE = Single Ens (L-M), another End open ereut) LED tbe wiring
PROFILE
Technical Data
Housing Heavy gauge sheet steel boxy wit fully welded end-cap
Optical Anodized aluminum reflector
Surface Finishing White epoxy powder coated & oven baked
Lamp Holder Polycarbonate housing with Copper plate contact
Wie Heat resistance 105°C, SIRIM approved material
Connector UL, VDE safety approved materialVSL
CSG}
DOUBLE MIRROR CROSS-VANE LOUVRE FITTING
Double miro cross-vane louvre fitting presents @ fresh approach to
full your lighting requirements. I's design concept of double miror
lamellae intergrated with curved reflectors enables excellent reflec
tive characterstic,
‘Avallable in different size options to suit surface and recessed
‘mounted cellngs.
All louvres are located by posi-bolt which allowed them to swing
‘down for luminalre maintenance.
+ Picture shown efor istration purpose any
DESCRIPTION
Che cea) eer) Een
GMM 1202/RELED 200 / 240 615/650 6/94 1x2
GMM 2212/REMLED 288 / 330 615/650 86/94 axot
GMM 2222/RE/LED 591/630 615/650 36/98 2xot
GMM 3222/RE/LED 691 / 630 615/650 96/94 axon
GMM 4222/REMLED 591 /630 615/650 86/94 axon
GMM 1414/REMLED 288/330 1205 / 1258 36/94 tate
GMM 2414/REMLED 288 / 330 1225/1258 86/94 2xatt
GMM 2424/REMLED 591 /630 1225 1258, 36/94 axatt
GMM 3424/RE/LED 591/630 1225 / 1258 86/98 xatt
GMM 4424/REILED 591 / 620 1228/1258 86/94 axatt
* IRE ~Plastor Recessed
LEDIE = One End (L-N), One En (shert cru LED tube wing
/LEDIZE = One End (L), One Ena (N) LED tube wiring
LEDISE = Single End (LN), another End open crcl LED tube wiing
22