Professional Documents
Culture Documents
Порядок Установки Драйвера Frp
Порядок Установки Драйвера Frp
Title
General information................................................... ................................................ ........................................1
General information
The included software includes a driver for the corresponding FRP machine, through the WinUSB
interface.
Shaggy:
1). To do this, we press the combination of the Win + I keys and, holding down the Shift key, select
«Shutdown» ÿ «Reboot»
1
Machine Translated by Google
For Windows 10, the "Shutdown" button is located in the "Start" menu, hold down the Shift
key, select "Shutdown" ÿ "Restart"
2) When turning off the computer, the computer's parameters page will appear, you need to
select "Diagnostics":
5) Just click "Reboot" and go to the next step when the system boots:
3
Machine Translated by Google
6) After the restart, we will be on the page for selecting the parameters of the boot system. That is,
the system will load in the large mode that we choose on this page. In our case, it is necessary to
download in the mode «Otkluktiyu mandatory verification of driver signatures», so we press the F7 key.
4
Machine Translated by Google
Find the device on the machine, when connected, it will appear in the section "Ports (COM and LPT)
5
Machine Translated by Google
Next, click on it with the right button and select the menu item "update driver"
Next
6
Machine Translated by Google
Vybrat iz spika
7
Machine Translated by Google
8
Machine Translated by Google
Specify the path to the driver and select the folder for Windows Vista 7 8 10
9
Machine Translated by Google
After installation
10
Machine Translated by Google
The device will appear in the dispatcher device. It remains only to select the driver in the program
11
Machine Translated by Google
Open the dispatcher device. To do this, press the Start button , select the Control Panel, System and
Security components, and then select Device Manager in the System section . If you are prompted to enter
a password, the administrator will be prompted
confirmation, specify the password or provide confirmation.
For Windows 8
Press the combination of Windows + X and click on the item, select "Device Manager" from the menu
that appears
12
Machine Translated by Google
ÿÿÿÿÿÿÿÿ ÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿ ÿÿ ÿÿÿÿ ÿÿÿÿÿÿÿÿÿ ÿ ÿÿÿÿÿÿ ÿÿÿÿÿ, ÿÿÿÿÿÿ ÿÿÿÿÿ ÿ ÿÿÿÿÿÿÿ.
Depending on the required driver – select the folder USBtoLPT – for the driver Usb To LPT or
WinUSBFRP01 – for drivers with WinUSB support (now with Windows 7 and higher)
Driver USBtoLPT
13
Machine Translated by Google
Click "Next"
14
Machine Translated by Google
15
Machine Translated by Google
Driver selection is carried out through menu «Service» «Program settings», tab «Driver». The list
of available drivers is displayed in the left part of the window, and the active driver is displayed on the
right. Driver «Demo» - is a plug-in, intended for use without a machine.
A driver is selected on the left, when a new driver is selected, the Select button becomes available.
After that, the selection of a new driver will appear, then click "OK".
confirmation.
17