Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

TE C HN I C AL D A T A


Airmaster , Q Series,
ECO card option, software update

Table of Contents
1. Software update through Micro SD card ..........................................................
................................ 2
1.1 Remove power ................................................................................................
................................ .................................. 2
1.2 Unlock the Micro SD card ................................................................
................................................. 2
1.3 Remove the Micro SD
D card by hand ................................................................
................................. 3
1.4 Put files onto the Micro SD card ................................................................
...................................... 3
1.4.1 Standard software update packet ................................................................
............................................................. 3
1.4.2 IP config ................................................................................................................................
................................ ...................................... 4
1.5 Reinsert the Micro SD card in the slot by hand................................
hand................................................ 4
1.6 Lock the Micro SD card.....................................................................................
................................ ..................... 5
1.7 Reapply power ................................................................................................
................................ .................................. 5
1.8 Check hardware OK indicators ................................................................
......................................... 5
1.9 Check web page operation ................................................................
............................................... 5

Revision history

VERSION AUTHOR CHANGE REVIEWED


1.0 – 2015/07/30 AD Initial document KM –2015/07/31

W W W. CO N T RO L C O MP R ES SO RS. C O M
TE C HN I C AL D A T A

The following update process assumes the ECO card option is installed in a host Airmaster™Q1.

There is no requirement to remove the host Airmaster Q1 from its host device (e.g. an air
compressor), however it is important to assure that power has been removed
removed from the host
Airmaster™ Q1 during the update process and you will require access to the side wall of the
Airmaster™ Q1 during the update process.

1. Software update through Micro SD card


1.1 Remove power

y disconnecting any socket from X13 of the host Airmaster™ Q1


Remove power by

1.2 Unlock the Micro SD card


At the Micro SD card ‘slot’ access point shown below and using g a thin blunt object such as
a flat-head
head screwdriver (shown left), unlock the Micro SD card by pushing gently against
its side until you hear a ‘click
click’. Remove the thin blunt object. The Micro SD card will eject
and protrude as shown (right).

W W W. CO N T RO L C O MP R ES SO RS. C O M
TE C HN I C AL D A T A

1.3 Remove the Micro SD card by hand


The Micro SD card can be physically removed. Observe Micro SD card slot orientation!

1.4 Put files onto the Micro SD card

1.4.1 Standard software update packet

Put the Micro SD card into a proprietary Micro SD card reader (not supplied!). Once
inserted, use a proprietary PC (not supplied) to access the Micro SD cards file system.

Place the ECO card option, ‘software update packet’’ onto the Micro SD card’s file
system as shown below.

The ‘software
software update packet’
packet (QECMWEBS_EXX.zip) contains a number of files to put in
the root directory as indicated above. Just replace the existing
existing files in the root directory
of the SD card with the ones you find in the update packet on the root directory. These
are all the files required to operate the web pages. To update the actual ECO card
embedded software, a QECMWEBS.BIN file must be placed in the UPDATE sub directory.

W W W. CO N T RO L C O MP R ES SO RS. C O M
TE C HN I C AL D A T A

This file is also present in the update packet in the UPDATE directory. Upon power on
the ECO card will look for this file, use it, and delete it afterwards from the SD card.

1.4.2 IP config

The update packet comes with a setup forr a fixed dummy IP address. This can be
changed by editing the DEFNET.JS file with any standard text editor.
editor The content of this
file is shown below.

//.............................................NET
var SYS_HostName = "Q1_ECO_CARD";
var SYS_SMTPServerIp = "192.168.0.2";
var SYS_UseFixedIPAddress = 1;
var SYS_IPAddress = "192.168.0.97";
var SYS_SubnetMask = "255.255.255.0";
var SYS_DefaultGateway = "192.168.0.254";
var SYS_PrimaryDNSServer = "194.25.2.129";
var SYS_SecondaryDNSServer = "194.25.2.130";

To setup the ECO card for a fixed IP addres, set the variable SYS_UseFixedIPAddress = 1
and fill in the SYS_IPAddress, SYS_SubnetMask, SYS_DefaultGateway,
SYS_PrimaryDNSServer and SYS_SecondaryDNSServer values. You can access the
web pages by using the IP address
ad in your browser.

To setup the ECO card for a DHCP provided IP addres, set the variable
SYS_UseFixedIPAddress = 0 and fill in a desired URL name in the variable called
SYS_HostName = "Q1_ECO_CARD".
"Q1_ECO_CARD" You can access the web pages by using the URL in
your browser.

1.5 Reinsert the Micro SD card in the slot by hand

Observe Micro SD card slot orientation!

W W W. CO N T RO L C O MP R ES SO RS. C O M
TE C HN I C AL D A T A

1.6 Lock the Micro SD card


Lock the Micro SD card by pushing gently against its side wall until you hear a ‘click’.

1.7 Reapply power

1.8 Check hardware OK indicators


On each side of the Micro SD card, a green LED should illuminate indicating correct
operation.

1.9 Check web page operation


Reinstate the host Airmaster™ Q1, connect to network (X14 / RJ45 of host Airmaster™
Q1) and assure the presence
ence of an IP address. Then, using
sing an external device on the
same network, enter the known IP address or configured URL in your browser.

You should now see the update inclusive web pages!

W W W. CO N T RO L C O MP R ES SO RS. C O M

You might also like