Professional Documents
Culture Documents
FINAL2
FINAL2
The flame sensor discovers the presence of fire using the infrared flame flash
technique. It has a sensitivity range between 4.3 to 4.4
EXPERIMENTAL SETUP:
SUPPLIES:
The components required to build this project
are mentioned below.
1. Arduino
2. Flame Sensor
3. Buzzer
4. Jumper wires
5. Breadboard OUTPUT:
6. USB Cable
FLOWCHART:
CONCLUSION:
It Is the simplest way to save lives by warning the
occupants about emergence. It is very important to
detect the disaster early to create a healthy
environment and avoid destructions.Additionally, it is
cost-friendly to implement. We can perform further
modifications by adding auto fire suppression
techniques. As you can see here, the buzzer starts
ringing as the flame sensor detects fire.