Professional Documents
Culture Documents
BGAS Ques With PA10 - Answer
BGAS Ques With PA10 - Answer
a. Cu slag
b. shots
c. garnets
d. metallic grit
6. Surface profile needle gauge calibrated by
a. Flat smooth plate
b. Permanent record
c. Curved surface
d. Using replica tape
7. Picture of micrometer with testex
a. b. .c. d.
BGAS PAINTING INSPECTION GRADE II 1
8. Picture of comparator
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
a. b. c. d.
59. IGE SR 21
a. Schedule of paint colour’s for building purposes
b. Code of practice for safety during blast cleaning operations.
c. Prepration of steel supstrate
d. Specifications for test sieves
60. Lightness is identify by
a. Numbered
b. Blue
c. Capital letters
d. Codings
61. Component coating with zinc, thickness
a. Approximately 150 microns
b. 60 micons
c. Approximately 100 microns
d. Approximately 425 microns
62. Coating thickness above 0.5 mm used to
a. Conical mandrel
b. Wet sponge pinhole detector
c. Toxicity
d. High voltage holiday detector
63. DFT 300-500 microns, voltage setting is
a. 9 V
b. 300 V
c. 90 V or 67 ½ V
d. 60 V
64. Pinhole detection operates upto
a. Above 500 microns
b. Less than 600 microns
c. Less than 500 microns
d. Above 625 microns
COATING FAULTS
66. Picture is
a. Cissing
b. Bittiness
c. Cracking
d. Ropiness
67. .Picture is
a. Cissing
b. Cratering
c. Cracking
d. Orange peel
68. .Picture is
e. Cissing
f. Bittiness
g. Sagging
h. Flaking
69. .Picture is
i. Wrinkling
j. Flaking
k. Cissing
l. Sagging
m. Ropiness
n. Flaking
o. Run & Sag
p. Cracking
71. .Picture is
q. Ropiness
r. Flaking
s. Cissing
t. Wrinkling
72. Picture is
u. Ropiness
v. Flaking
w. Run-Sag
x. Cracking
REFER
1.Damp surface - definition
2.Etch primer – definition
3.Read 7.1 – 1’st two lines
4.Read 26.2