Professional Documents
Culture Documents
SMD - MCQ - Unit I-Unit Ii
SMD - MCQ - Unit I-Unit Ii
Correct Answer A
05 Question: During Synthesis process a design takes a form of _ & _
Option A VMC
Option B CNC
Option C DNC
Option D All of above
SOLID MODELING AND DRAFTING UNIT No-01
[Multiple Choice Questions]
Name of UNIT: 3D Modeling & Viewing
Correct Answer D
09 Question: CNC stands for
Correct Answer B
13 Question: CAD CAM process is which type of model?
Option A Geometric
Option B Algebraic
Option C Analysis
Option D All of above
Correct Answer A
14 Question: CAD is a subset of _ process.
Option A Manufacturing
Option B Design
Option C Dimensioning
Option D Tolerance
Correct Answer B
15 Question: CAM process is subset of _ .
Option A Tolerancing
Option B Design
Option C Manufacturing
Option D All the above
Correct Answer C
16 Question: Which of the following is not an activity of CAD process?
Correct Answer D
17 Question: Which activity include in CAM process?
Option A Dimensioning
Option B Tolerancing
Option C Computer aided process planning
Option D Drafting
Correct Answer C
18 Question: CAD/CAM system requires_
Option A Hardware
Option B Software
Option C Both Hardware and Software
Option D None of above
Correct Answer C
19 Question: CAD/CAM software does not run on
Option A Linux
Option B Latex
Option C Unix
Option D Solid works
Correct Answer B
20 Question: Which of following is known as heart of CAD/CAM?
Option A Line
Option B Chamfer
Option C Splines
SOLID MODELING AND DRAFTING UNIT No-01
[Multiple Choice Questions]
Name of UNIT: 3D Modeling & Viewing
Option D Fillet
Correct Answer D
25 Question: MCS stand for
Option A 1
Option B 2
Option C 3
Option D 4
Correct Answer C
27 Question: How many WCS(sketch plane) active at any one point?
Option A 2
Option B 3
Option C 1
Option D 4
Correct Answer C
28 Question: Is the WCS is related to MCS then transformation equation is_
Option A Pm= T Pw
Option B Pw=T pm
Option C T= Pm Pw
SOLID MODELING AND DRAFTING UNIT No-01
[Multiple Choice Questions]
Name of UNIT: 3D Modeling & Viewing
Option D Pw= Pa Pm
Correct Answer A
29 Question: Which of the following system require CAD designer to invoke the Sketcher?
Option A Unigraphics
Option B Linux
Option C Ansys
Option D Latex
Correct Answer A
30 Question: The sketch parameters and dimensions work together.
Option A True
Option B False
Option C -
Option D -
Correct Answer A
31 Question: An extrusion feature is used to create
Option A Taper
Option B Curve
Option C Stiffer
Option D None of above
Correct Answer A
36 Question: A datum plane is used when we need
Option A Boolean
Option B Euler
Option C Jacobean
Option D None of above
Correct Answer A
38 Question: Which of following does not support Boolean operation?
Option A CATIA
Option B Unigraphics
Option C I-DEAS
Option D Solid works
Correct Answer D
39 Question: Which command is used for creating 3D solid and surface from closed
object?
Option A Sweep
Option B Revolve
Option C Loft
Option D Both sweep and loft
Correct Answer D
40 Question: Which two disciplines are tied by a common database?
Option A CAD/CAM
Option B Drafting and documentation
Option C Documentation
SOLID MODELING AND DRAFTING UNIT No-01
[Multiple Choice Questions]
Name of UNIT: 3D Modeling & Viewing
Option A Windows
Option B Unix
Option C VAX/VMS
Option D IDEAS
Correct Answer D
42 Question: CMM stands for
Option A 2
Option B 3
Option C 4
Option D 6
Correct Answer B
44 Question: GUI stands for
Option A 3
Option B 7
Option C 5
Option D 4
Correct Answer C
48 Question: The process of designing consists of _ _ identifiable steps.
Option A 6
Option B 8
Option C 4
SOLID MODELING AND DRAFTING UNIT No-01
[Multiple Choice Questions]
Name of UNIT: 3D Modeling & Viewing
Option D 7
Correct Answer A
49 Question: A system that automated the drafting process with interactive computer
graphics is called
Option A CAE
Option B CAD
Option C CAM
Option D CAI
Correct Answer B
50 Question: In computer aided drafting an arc is defined by
Option A
Option B
Option C
Option D
Correct Answer
52 Question:
Option A
Option B
Option C
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
06 Question: In the following geometric primitives. which is not a solid entity of CSG modelling:
Option A Box
Option B Cone
Option C Cylinder
Option D Circle
Correct Answer D
07 Question: Which of the following is not an analytical entity?
Option A Line
Option B Circle
Option C Spline
Option D Parabola
Correct Answer C
08 Question: Which of the following is not a synthetic entity?
Option A Hyperbola
Option B Bezier curve
Option C B-spline curve
Option D Cubic spline curve
Correct Answer A
09 Question: Which one of the following does not belong to the family of conics?
Option A Parabola
Option B Ellipse
Option C Hyperbola
Option D Line
Correct Answer D
10 Question: The number of tangents required to describe cubic splines is
Option A 2
Option B 1
Option C 3
Option D 4
Correct Answer B
11 Question: The shape of the Bezier curve is controlled by:
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
Option A n+1
Option B n-1
Option C n
Option D 2n
Correct Answer A
14 Question: The degree of the B-spline with varying knot vectors:
Option A 4
Option B 3
Option C 2
Option D 5
Correct Answer B
16 Question: The tensor product technique constraints surfaces by two curves.
Option A Adding
Option B Subtraction
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
Option C Multiplying
Option D Dividing
Correct Answer C
17 Question: In the bezier curve, the curve is always to first and last
segments of the polygon.
Option A normal
Option B parallel
Option C tangent
Option D none of the above
Correct Answer C
18 Question: The unit vector in the direction of the line is defined as .
Option A tangent vector+length of the line
Correct Answer C
20 Question: curves allow local control of the curve.
Option A Analytical
Option C Beizer
Option D B-Spline
Correct Answer D
21 Question: To determine the coefficients of the equation – two end-points and the
two tangent vectors. This statement is true for which of the following?
Option A B-spline curve
Option B Hermite Cubic Spline Curve
Option C Beizer curve
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
Correct Answer C
23 Question: Mathematically, the ellipse is a curve generated by a point moving in
space such that at any position the sum of its distances from two fixed points (foci)
is constant and equal to
Option A the major diameter
Correct Answer A
24 Question: When a smooth curve is approximated through the data points, then the
curve is known as
Option A interpolant curve
Correct Answer B
25 Question: In Beizer Curve, the curve follows .
Option A the control points
Option B the shape of the defining polygon
Option C the defining points
Option D none of the above
Correct Answer B
26 Question: In Beizer Curve, of polygon actually lie on the curve.
Option A only the first control point
Correct Answer C
27 Question: In Beizer Curve, the flexibility of the shape would increase with
of the polygon.
Option A decrease in the number of vertices
Correct Answer B
28 Question: The number of control points can be added or subtracted in
.
Option A Bezier curve
Correct Answer B
29 Question: The degree of the curve is independent of the number of control points
in .
Option A Hermite cubic spline curve
Option B Bezier curve
Option C B-spline curve
Option D Hyperbola
Correct Answer C
30 Question: The is used to create a surface using curves that form
closed boundaries.
Option A ruled Surface
Option D 2D modeling
Correct Answer A
32 Question: Which kind of model can store information about geometry and topology
both?
Option A Solid model
Correct Answer A
33 Question: From the following, which method is also called as the Building Block
Approach?
Option A Cellular Decomposition
Option B Spatial Occupancy Enumeration
Option C Generalized Sweeps
Option D Constructive Solid Geometry
Correct Answer D
34 Question: Structuring and combining the primitives of the solid model in the
graphics database, is achieved by the use of .
Option A FEA
Option B transformations
Correct Answer C
35 Question: The data representation of CSG objects is represented by .
Option A a binary tree
Option C a primitive
Correct Answer A
36 Question: is an extension of the wireframe model with additional
face information added.
Option A CSG
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
Option B B-rep
Option C Loft
Correct Answer B
37 Question: For 3D modeling of automobile body styling, which of the following is a
preferred technique?
Option A Constructive Solid Geometry
Option B Pure Primitive Instancing
Option C Boundary Representation
Option D Spatial Occupancy Enumeration
Correct Answer C
38 Question: Which of the following uses a number of two-dimensional profiles for
generating a three-dimensional object?
Option A Tweaking
Option B Lofting
Option C Filleting
Correct Answer B
39 Question: To create a hollow part, which of the following command would be most
efficient?
Option A Extrude
Option B Sweep
Option C Shell
Option D Revolve
Correct Answer C
40 Question: The curve is defined as the locus of a point moving with _ degree of
freedom.
Option A 0
Option B 1
Option C 2
Option D 3
Correct Answer B
41 Question: Write parametric equation of line having end points P1(3,5,8) and
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
P2(6,4,3).
Option A 3i+j-5k
Option B 3i-j-5k
Option C 3i-j+5k
Option D -3i-j-5k
Correct Answer B
43 Question: Find coordinates of points on line at u=0.25
Option A P1 X P2=0
Option B P1 . P2=0
Option C P1 = P2
Option D P1+ P2=0
Correct Answer A
45 Question: Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2
2 -6] and P2=[1 5 -2]+u[1 4 2]. Tangent vector for line L1
Option A 2i+2j-6k
Option B 2i+2j+6k
Option C 2i-2j-6k
Option D 6-2j-2k
Correct Answer A
46 Question: For Q 45, Tangent vector for line L2
SOLIDE MODELLING AND DRAFTING [Multiple UNIT No-02
Choice Question]
Name of UNIT: GEOMETRIC MODELING
Option A i+4j-k
Option B 2i+4j+k
Option C i-4j-2k
Option D i+4j+2k
Correct Answer D
47 Question: For Q 45, Lines are perpendicular?
Option A True
Option B False
Option C
Option D
Correct Answer B
48 Question: Parametric equation for circle
Option A 9.24,9.24
Option B 9.42,9.42
Option C 9,9
Option D 11,5
Correct Answer A
CAD/CAM & AUTOMATION [Multiple Choice Question] UNIT No-06
Name of UNIT: Robotics
51 Question: A circle is passing through two end points A[6,4] and B[10,10]. Find
center point of circle.
Option A 7,8
Option B 8,8
Option C 8,7
Option D 7,7
Correct Answer C
52 Question: For Q 51, find radius of circle
Option A 3
Option B 3.6
Option C 4
Option D 3.5
Correct Answer B
53 Question: For Q 51, find coordinates of point on circle at u=0
Option A 11.6, 7
Option B 7, 11
Option C 11, 7
Option D 11.5, 7.5
Correct Answer A
54 Question: Find parametric equation for X-coordinates of hermite cubic spline
curve having end points P0[4,4]; P1[8,5]
Option A -5u3+8u2+u+1
Option B 5u3+8u2+u+1
Option C 8u3-5u2-u+1
Option D 8u3+5u2+u+1
Correct Answer A
55 Question: Find parametric equation for Y-coordinates of Hermite cubic spline
curve having end points P0[4,4]; P1[8,5]
Option A 2u3-3u2+2u+4
Option B 3u3-2u2-2u-4
Option C 2u3-3u2-2u-4
Option D 2u3+3u2+2u+4
Correct Answer A