Professional Documents
Culture Documents
List
List
2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LINKS:
Click on the green links below to move to the specified document category.
When using Adobe Reader 9, if the links are not active, select Edit Menu Preferences, then in Documents Category, change PDF/A View Mode to “NEVER.”
When using Adobe Reader X, this is not necessary.
NAVIGATION TIPS:
When using Adobe Reader 9, select View Menu Toolbars More Tools, and check all items in the Page Navigator Toolbar group.
When using Adobe Reader X, ALT/left arrow returns to the previous page.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Link to Series 3++ Controller Documentation Link to Series 3 Plus Controller Documentation
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
PANEL SPECIFICATIONS SALES SERVICE BULLETINS EQUIPMENT REPAIR and AUDIT FORMS APPLICATION NOTES TECHNICAL NOTES
CCC Product
MS200 CCC Product Lifecycle Management Policy
Lifecycle Policy
MS74 Series II Controllers End of Support Notification (limited to Field Service only) Product Notification
MS87 Series 3 Controllers End of Support Notification (limited to Field Service only) Product Notification
MS139 Series 3 Plus Controllers End of Support Notification (ends Dec 31, 2011) Product Notification
MS100 Series 4 Controllers End of Support Notification (ends Dec 31, 2013) Product Notification
MS138 TrainView1 End of Support Notification (support ended in 2009) Product Notification
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
MS125 Comparing Series 3 Plus and Series 3++ Control Systems Product Comparison
MS145 Comparing Series 3++ and Series 5 Control Systems Product Comparison
OnLookTM is the central exchange point for CCC remote support engineers and TrainTools Remote Access Points (TT-TAPs) installed at customer sites.
The OnLookTM White Paper and Sales Brochure are available on the CCC Website
TN63 OnLookTM Secure Remote Diagnostics/Support Sessions (User Guide & Best Practices) User Guide
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
TM
TIME SYNCHRONIZATION (NTP) NETWORKING RECOMMENDATIONS TRAINTOOLS PRODUCT BULLETINS ENHANCED OnLook
PROJECT ENGINEERING PROGRAMS PACKAGE ARCHIVE SERVER and ARCHIVE DATA UTILITIES PACKAGES
SERIES 5 EMULATOR PACKAGE VIBRANT SYSTEMS ANALYSIS PACKAGES COMPRESSOR PERFORMANCE ADVISOR (CPA) PACKAGE
UM5500 see Chapter 2 for an overview of the Data Communication programs TrainTools Overview
UM5502 TrainTools - Modbus/OPC Gateways User Manual
UM5503 TrainTools - Series 3 OPC Server User Manual
UM5504 TrainTools - Series 4 OPC Server User Manual
UM5505 TrainTools - Series 5 OPC Server User Manual
AN28 TrainTools - Series 5 OPC Server Overview Application Note
TN91-1 TrainTools - Redundant Configuration Server Synchronication Technical Note
TN91-2 TrainTools - Remote Project Builder (also see UM5535) Technical Note
TN92-2 TrainTools - Remote Series 5 Configurator (also see UM5512) Technical Note
TN92-1 TrainTools - Redundant Modbus OPC Communication (also see UM5502) Technical Note
11
UM5500 see Chapter 5 for an overview of the Field Engineering Utilities TrainTools Overview
UM5513 TrainTools - Series 3* Engineering Utilities (S3* Configurator, Fast Recorder, and Alarm Monitor) User Manual
UM5514 TrainTools - Series 4 Engineering Utilities (S4 Configurator, Fast Recorder, and Alarm Monitor) User Manual
UM5512 TrainTools - Series 5 Engineering Utilities (S5 Configurator, Fast Recorder, and Alarm Monitor) User Manual
TN32 TrainTools - Series 5 Duplex Supervisor Technical Note
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
® ®
TRAINVIEW and TRAINVIEW WEB PACKAGES TOP
UM5500 see Chapter 3 for an overview of TrainView, see Chapter 4 for an overview of TrainViewWeb TrainTools Overview
UM5522 TrainTools - TrainView Software Operator Manual (new HMI) Operator Manual
UM5522-oHMI TrainTools - TrainView Software Operator Manual (old HMI) Operator Manual
UM5509 TrainTools - Web Services and Client Applications Operator Manual
TN80 Remote Access to Third Party Clients through WebGateway Technical Note
UM5500 see Chapter 6 for an overview of the Project Engineering Programs TrainTools Overview
UM5531 TrainTools - Project Builder Engineering Program Engineering Manual
UM5532 TrainTools - Project Builder PC Communication Engineering Engineering Manual
UM5535 TrainTools - Project Builder Series 5 Control System Engineering Engineering Manual
TN91-2 TrainTools - Remote Project Builder Technical Note
TN92-2 TrainTools - Remote Series 5 Configurator Technical Note
TN45 Transferring Project Files (simplified version) Technical Note
UM5500 see Chapter 3 for an overview of the Archive Data Programs TrainTools Overview
UM5521 TrainTools - Archival Data Viewers (Reporter, Exporter, Viewer) Operator Manual
UM5532 TrainTools - Project Builder PC Communication Engineering Engineering Manual
UM5533 TrainTools - Project Builder Archival Data Report Engineering Engineering Manual
TN29 Series 5 Control System (NTP) Time Synchronization Technical Note
TN91-0 Installing Web Archive Utilities on the TrainTools Archiving Component (TT-ARC) Server Technical Note
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
PB5523 TrainTools - Series 5 Emulator (Controller Emulation Software – overview) Product Bulletin
UM5523 TrainTools - Series 5 Emulator (Controller Emulation Software) User Manual
EM0001 TrainTools - CCC Series 3-4-5 Hardware Emulator (Overview & Procedures) User Manual
TN48 TrainTools - Series 5 Emulator (Controller Emulation Software – additional details) Technical Note
UM5536 Compressor Performance Advisor (CPA) Configuration and Operator Manual User Manual
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
Series 5 Application Manuals Vanguard Hardware Manuals Reliant Hardware Manuals Series 5 Data Sheets Series 5M
Local Conditioning Module (LCM) Data Sheets SureLink Remote I/O Subsystem and RCM Data Sheets Comm-Power Data Sheets (for All Series)
Series 5 Emulator Series 5 Vantage Series 5 Vibrant DPM Positioning Guardian Rotary Fuel Valve
TN33 Series 5 Vanguard Hardware Assembly Revision Identification & Compatibility of Replacements Technical Note
TN67 Series 5 Reliant Hardware Assembly Revision Identification & Compatibility of Replacements Technical Note
TN68 Series 5 Vantage Hardware Assembly Revision Identification & Compatibility of Replacements Technical Note
TN69 Series 5 Guardian Hardware Assembly Revision Identification & Compatibility of Replacements Technical Note
TN34 Series 5 Simplex in Duplex Chassis (short-term solution) Technical Note
TN59 Series 5 External Integrity Monitoring (discrete inputs and outputs) Technical Note
TN66 Setting Failure Levels for Smart Transmitters in CCC Controllers Technical Note
TN51 TrainTools Networking Recommendations with Series 5 Vanguard Controllers Technical Note
TN71 TrainTools Networking Recommendations with Series 5M (Migration) Controllers Technical Note
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
UM5400 Series 5 – Turbomachinery Control Principles (TrainWare Theory Manual) User Manual
UM5401 Series 5 – Overview of Available Valve Positioning Applications User Manual
UM5402 Series 5 – Controller Operation and Configuration User Manual
UM5403 Series 5 – Modbus Communication User Manual
UM5404 Series 5 – IMCB Communication User Manual
UM5405 Series 5 – TrainLink Communication User Manual
UM5409 Series 5 – Simple PID Control Application User Manual
UM5411 Series 5 – Antisurge Control Application User Manual
UM5412 Series 5 – Performance Control Application User Manual
UM5413 Series 5 – Expander Control Application (PRT) User Manual
UM5414 Series 5 – S Control Application for Cold Recycle Systems User Manual
UM5421 Series 5 – Gas Turbine Control Application User Manual
UM5431 Series 5 – Speed Control Application User Manual
UM5432 Series 5 – Extraction Control Application User Manual
UM5433 Series 5 – Utility Turbine Control (UTC) Application User Manual
UM5451 Series 5 – Logic Control Applications User Manual
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
® TOP
SERIES 5 VANGUARD HARDWARE MANUALS
® TOP
SERIES 5 RELIANT HARDWARE MANUALS
DS5112 Vanguard Power Supply Module – PSMU-350-3 (installs into CPCI-8-S2-NPS and CPCI-10-D2-NPS) Data Sheet
DS5110 Vanguard Power Supply Module – PSMDC-200 (installs into CPCI-8-S2-NPS1 and CPCI-10-D2-NPS1) Data Sheet
DS5130 Vanguard High-Density FTA Discrete Input FTA – FTA-557 Data Sheet
DS5131 Vanguard High-Density FTA Discrete Outpu FTA – FTA-558 Data Sheet
DS5132 Vanguard High-Density FTA Analog Input FTA – FTA-547 Data Sheet
DS5134 Vanguard High-Density Processor (Slave) Module – HDIO-PROC (installs on the High-Density FTAs) Data Sheet
DS5133 Vanguard High-Density FTA Cable Network Data Sheet
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
DS5210 LCM – list of all the Local Conditioning Modules Linked List
DS5213 LCM – Analog Current Input – LCM CM-1-335 Data Sheet
DS5214 LCM – Analog Resistance Input – LCM CM-1-536 Data Sheet
DS5215 LCM – Analog Thermocouple Input – LCM CM-1- 547-3 Data Sheet
DS5216 LCM – Analog Thermocouple Input – LCM CM-1- 547-4 Data Sheet
DS5217 LCM – Analog Current Output – LCM CM-1-439 Data Sheet
DS5218 LCM – Linearized Thermocouple Input – 7B47-J-01-1 Data Sheet
DS5219 LCM – Linearized Thermocouple Input – 7B47-J-02-1 Data Sheet
DS5220 LCM – Analog Voltage Input – 7B30-07-1 Data Sheet
DS5221 LCM – Analog Voltage Input – 7B31-03-1 Data Sheet
DS5223 LCM – Isolated 100¾ Pt RTD Input – 7B34-04-1 Data Sheet
DS5224 LCM – Analog Bipolar Voltage Input – 7B41-02-1 Data Sheet
DS5225 LCM – Linearized Thermocouple Input – 7B47-K-04-1 Data Sheet
DS5226 LCM – Linearized Thermocouple Input – 7B47-T-05-1 Data Sheet
DS5241 LCM – Discrete AC/DC Input – 70G-IAC24A Data Sheet
DS5242 LCM – Discrete DC Input – CM-2-101 Data Sheet
DS5243 LCM – Discrete AC/DC Input – CM-2-102 Data Sheet
DS5244 LCM – Discrete AC/DC Input – 70G-IDC24NP Data Sheet
DS5245 LCM – Discrete AC/DC Input – 70G-IAC24 Data Sheet
DS5246 LCM – Passive Pickup – CM-3-100 Data Sheet
DS5247 LCM – Discrete AC/DC Output - CM-2-200 Data Sheet
DS5248 LCM – Discrete DC Output – CM-2-201 Data Sheet
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
DS4024 Series 5M – uses the Series 4 DC-300 Discrete Input Daughter Card Data Sheet
DS4025 Series 5M – uses the Series 4 DC-403 I/O Daughter Card Data Sheet
DS4026 Series 5M – uses the Series 4 DC-310 Discrete Input Daughter Card Data Sheet
DS4027 Series 5M – uses the Series 4 DC-411 Discrete Output Daughter Card Data Sheet
DS4030 Series 5M – uses the Series 4 DC-101 I/O Daughter Card Data Sheet
UM5000 Series 5 – System Overview (see Chapter 1) User Manual
UM5010 Series 5 – Communication Interfaces and Port Assignments (see Chapter 1) User Manual
UM5402 Series 5 – Controller Operation and Configuration (see Appendix B) User Manual
UM5403 Series 5 – Modbus Communication User Manual
UM5404 Series 5 – IMCB Communication User Manual
UM5405 Series 5 – TrainLink Communication User Manual
UM5421 Series 5 – (GTM) Gas Turbine Control Application (see Appendix E) User Manual
UM5512 TrainTools – Series 5 Engineering Utilities (S5 Configurator, Fast Recorder, and Alarm Monitor) User Manual
UM5535 TrainTools – Project Builder – Series 5 Control System Engineering (see Chapter 2) User Manual
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
S4 Controller Manuals S4 Data Sheets DPM Positioning Guardian Rotary Fuel Valve
Manuals and Data Sheets Application Notes DPM Positioning Guardian Rotary Fuel Valve
TN66 Setting Failure Levels for Smart Transmitters in CCC Controllers Technical Note
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
Manuals and Data Sheets EAS & Simulator Software DPM Positioning Guardian Rotary Fuel Valve
IM26 EAS Surge Detector and Manual Loading Station User Manual
IM27 EAS Features Manual User Manual
IM28 Simulator Simulation Software for Series 3 Plus Controllers User Manual
FM69C EAS Configuration Worksheet Config Form
FM69L EAS Configuration Planner Config Form
SERIES 3 PLUS (FUEL) GAS TURBINE CONTROLLER MANUAL (for Multishaft Industrial Gas Turbines) TOP
UM311 Series 3 Plus Fuel Controller (for Multishaft Industrial Gas Turbines) User Manual
DS311D Series 3 Plus Fuel Controller OPC Server Data Data Sheet
DS311M Series 3 Plus Fuel Controller Modbus Data Data Sheet
DS311O Series 3 Plus Fuel Controller Operator Interface Description Data Sheet
DS311V Series 3 Plus Fuel Controller Revision History Data Sheet
FM311C Series 3 Plus Fuel Controller Configuration Worksheet CFG Worksheet
FM311L Series 3 Plus Fuel Controller Configuration Planner CFG Planner
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
SERIES 3 PLUS (FUEL) GAS TURBINE CONTROLLER MANUAL (for Multishaft Aero-Derivative Gas Turbines) TOP
UM312 Series 3 Plus Fuel Controller (for Multishaft Aero-Derivative Gas Turbines) User Manual
DS312D Series 3 Plus Fuel Controller OPC Server Data Data Sheet
DS312M Series 3 Plus Fuel Controller Modbus Data Data Sheet
DS312O Series 3 Plus Fuel Controller Operator Interface Specifications Data Sheet
DS312V Series 3 Plus Fuel Controller Revision History Data Sheet
FM312C Series 3 Plus Fuel Controller Configuration Worksheet CFG Worksheet
FM312L Series 3 Plus Fuel Controller Configuration Planner CFG Planner
SERIES 3 PLUS (FUEL) GAS TURBINE CONTROLLER MANUAL (for Single-Shaft Gas Turbines) TOP
UM313 Series 3 Plus Fuel Controller (for Single-Shaft Gas Turbines) User Manual
DS313M Series 3 Plus Fuel Controller Modbus Data Data Sheet
DS313O Series 3 Plus Fuel Controller Operator Interface Specifications Data Sheet
DS313V Series 3 Plus Fuel Controller Revision History Data Sheet
FM313C Series 3 Plus Fuel Controller Configuration Worksheet CFG Worksheet
FM313L Series 3 Plus Fuel Controller Configuration Planner CFG Planner
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
Periodic Analysis Package includes: OPC Servers, Vibration Monitor (in TrainView), Vibration Analyzer, VibEngine, VibBuilder (in Project Builder)
Transient Analysis Package includes: OPC Servers, Vibration Monitor, Vibration Analyzer, VibEngine (w/ optional Event Capture Service), VibBuilder
TN50 Vibrant - Protection and Monitoring System Overview (includes description of Analysis Package options) Technical Note
TN53 Vibrant - Vibration Analyzer Program (Analyzing Offline Displays) Operator Manual
TN54 Vibrant - VibEngine Program (with its Optional Event Capture Service) Operator Manual
TN55 Vibrant - VibBuilder Program (Editing the Vibration Data) Operator Manual
TN56 Vibrant - Vibration Monitor (TrainView Component) Operator Manual
UM5535 Vibrant - Adding Vibrant Controller Branches in Project Builder (Chapter 2) Engineering Manual
UM5532 Vibrant - Adding VibEngine and Vibration Monitor Branches in Project Builder (Chapter 3) Engineering Manual
CCC CUSTOMER PUBLICATIONS DOC LIST for TTCR 9.2
TrainTools Comprehensive Release 9.2 – April 2012
Documents listed below can be opened in PDF format.
THESE DOCUMENTS ARE FOR THE USE OF COMPRESSOR CONTROLS CORPORATION AND ARE NOT TO BE REPRODUCED OR REDISTRIBUTED WITHOUT WRITTEN PERMISSION.
TOP
UM8407 Vantage GD Steam Turbine Governor (for generator drives) User Manual
DS8407 Vantage GD Steam Turbine Governor Hardware & Environmental Specifications Data Sheet
FM8407 Vantage GD Configuration Form Configuration Form
UM8408 Vantage GDX Extraction Steam Turbine Governor (for generator drives) User Manual
DS8408 Vantage GDX Extraction Steam Turbine Governor Hardware & Environmental Specifications Data Sheet
FM8408 Vantage GDX Configuration Form Configuration Form
TOP
TOP
TOP
MULTIPLE DOCUMENT SEARCH INDEXES
THE FOLLOWING SEARCH INDEX UTILITIES CAN BE USED TO SEARCH MULTIPLE PDF DOCUMENTS FOR A SPECIFIC WORD OR PHRASE
SALES SUPPORT Will seach only the Sales Support documentation files (Certifications, Comparisons, Support Notifications) Search Index
TRAINTOOLS Will seach only the TrainTools documentation files Search Index
SERIES 5 Will seach only the Series 5 documentation files Search Index
SERIES 5M Will seach only the Series 5M documentation files Search Index
SERIES 4 Will seach only the Series 4 documentation files Search Index
++
SERIES 3++ Will seach only the Series 3 documentation files Search Index
SERIES 3 PLUS Will seach only the Series 3 Plus documentation files Search Index
ALL DOCUMENTS Will search all the technical documentation Search Index