Professional Documents
Culture Documents
1.8 NC Format Procedure
1.8 NC Format Procedure
57
1. M60 / M60S Series
1.6 FOMAT procedure of M60/M60S Series
1.6 FORMAT procedure of M60/M60S Series SRAM using control screen operation
Timing for you carry out with the MEMORY FORMAT procedure:
(a) After a new NC UNIT is replaced or you has performed the “RAM CLEAR” procedure.
(b) After you mounted an expansion memory cassette for M65/65S or changed memory size.
(c) After Tool offset type is changed (Type I: parameter #1037 cmdtyp=1,
Type II: parameter #1037 cmdtyp =2).(For Machining Center use)
(d) After you added to option for “workpiece coordinate offset 48 sets”.
(e) After you added to option for “999 sets tool offset compensation” for M65/65S.
Operation Procedure
1. Power on M60/60S control unit.
TOOL
2. press the PARAM function selector key on the communication terminal.
MENU MENU
3. Press the key corresponding to the displayed on the bottom of the screen.
MENU MENU
Change the display, find the menu SETUP
,and press that key.
The message “Open the setup parameter?” will display on the screen. Press “Y” key,
INPUT
and then CALC key.
* YES:”Y” ”INPUT”
* NO :”N” ”INPUT”
#( )
(The normally hidden setup parameter menu will display when the menu changes over.
The required menu can be selected to display and set the setup parameters.)
58
1. M60 / M60S Series
1.6 FOMAT procedure of M60/M60S Series
4. The first page of the basic parameters for setup will display , so refer to the section
on the parameters and sets as required.(parameters #1001 to 1019)
MENU
5. Press the [NEXT PAGE] key on the right of the keys, and display the second page of
the basic parameters.
6. Refer to the section on the parameters and set the item as with the first page.
( parameters #1025 to 1043)
7. Set parameter #1060 setup on the second page to “1” (normally it is set to “0”), and perform
one-touch setup.
INPUT
#(1060) DATA ( 1 ) ( ) CALC
INPUT
#(1060) DATA ( 1 ) ( N ) CALC ( To retain the current parameters ).
9. Then you will be asked “ FORMAT? (Y/N) “ on the screen bottom.
INPUT
Input Y and press CALC
#(1060) DATA ( 1 ) ( Y ) (To initialize the machining program file and tool offset file).
10. You are finished.
CAUTION
Do not change setup parameters without prior approval from the machine maker.
59