Professional Documents
Culture Documents
IS902 MP Package Revision History
IS902 MP Package Revision History
2. Revision History
Modify as below :
V003 2010/08/26 Firmware : Michelle
[1]. Initial version.
MP Tool :
[1]. Enable LED Setting.
[2]. Support Multi-plane.
[3]. Minor bug fixed.
Flash DB :
[1]. Add Intel L73A JS29F32G08AAME1.
Version List :
Firmware V1.02.00.00 & V1.02.10.00
MP Tool V2.02.00.62
Flash DB V2.06
User Manual V003
2011/11/03
1
Innostor Technology Corporation
Modify as below :
Firmware :
[1]. 修正在 Removal Device 時, 點選磁碟機的”退出”發生錯誤的
狀況.
V005 2010/09/29 [2]. Improve Random Write performance. Michelle
[3]. 修正 LED Idle State 不會閃爍.
MP Tool :
[1]. Added [ Safe Mode ] function.
[2]. Added [ Force Initial ] function.
[3]. Do format(FAT32) device when second Initial-Device.
[4]. Show [ Removal ] / [ Fixed ] item on Windows XP.
[5]. Force Removal when OS version is Windows vista above.
Flash DB :
[1]. Add Intel JS29F64G08JCND1.
[2]. Fix CE value of PF29F32G16NCND1.
Version List :
Firmware V1.05.08.00 & V1.05.18.00
MP Tool V2.02.00.78
Flash DB V2.08
User Manual V005
Modify as below :
FW :
[1]. Modify LED OFF when Suspend and LED ON when Resume.
[2]. Modify LED Blink speed.
V007 2010/10/12 MP Tool : Michelle
[1]. Modified "Flash support list version" to "Flash DB version".
[2]. Modified Fixed Port function.
[3]. Modified Input Storage device ID issue.
[4]. Added Erase late-fail block last odd block of device.
[5]. Remove "Blink per second" item of LED Idle state combo box.
[6]. [ Force Capacity ] can’t exceed total available space.
[7]. Change timing setting.
[8]. Added [ Create MBR ] feature , only support FAT32.
[9]. Disable Device type : fix , due to re-MP can’t supported.
[10]. Modified LED RW State item.
2011/11/03
2
Innostor Technology Corporation
Modify as below :
FW :
[1]. LED idle timing after data written.
[2]. Linux cannot safe remove device.
MP Tool :
[1]. Added LED Blinking when Initial-Device.
[2]. Modified find FW block function(When find bad block, find next).
V008 2010/11/10 [3]. When Initial-Device, can not quit MP. Michelle
[4]. Modified Main UI.
[5]. Modified get capacity function and remove [Force Initial] item &
function.
[6]. Support half capacity initial-device(set CH or CE by user).
[7]. Added Support DDR function.
[8]. When device plug in, LED blinking.
[9]. When execute MP Tool, cancel Auto-run.
Flash DB :
[1]. Add support Micron L72A.
[2]. Add support ONFI DDR Flash.
[3]. Add support Hynix 4x-3xnm Flash.
[4]. Remove Samsung flash K9NCG08U5M.
Version List :
Firmware V1.08
MP Tool V2.02.01.01
Flash DB V3.01
User Manual V009
Modify as below :
FW :
[1]. Modify LED idle state and user setup is different.
V009_00 2010/11/23 MP Tool : Michelle
[1]. Write Extern Info-table.
[2]. Modified fixed port function.
[3]. Clear main dialog list info when remove device.
[4]. Modified create MBR function.
[5]. Modified get DDR FW function.
[6]. Modified Main UI.
Flash DB :
[1]. Add support Samsung 27nm MLC.
[2]. Add support Hynix H27UEG8YEA.
2011/11/03
3
Innostor Technology Corporation
Modify as below :
FW :
[1]. Enhance Bad Block Management.
[2]. Support Block address isn’t continuous.
MP Tool :
[1]. Added support list item select function by user.
[2]. Modified enable [ Special Function ] from r-button of mouse to
Function Key “F6”.
V010_00 2010/12/24 [3]. Added [ VID/PID ] item on list. Michelle
[4]. Support [ Create MBR ] format by file system FAT32/NTFS on
initialization.
[5]. Modified Format FAT32 function.
[6]. Modified MBR.
[7]. Move "Config Hub" button.
[8]. Support 3 levels capacity setting of [ Config ] page.
[9]. Modified Format function(if select "Create MBR" + FAT32, used LBA
write mode to format FAT32).
[10]. Modified get flash CE function.
[11]. Modified Select list item function(Fixed not open MP Tool issue).
Flash DB :
[1]. Add support Samsung 51nm SLC and 32nm K9PFG08U5M.
[2]. Add Support Samsung K9GBG08U0M, K9LCG08U1M and
K9HDG08U5M.
Version List :
Firmware V1.09
MP Tool V2.03.00.11
Flash DB V3.11.02_M
User Manual V012
Modify as below :
MP Tool :
[1]. Modified UI function for 800x600.
V010_01 2011/01/25 [2]. Modified write sector SCSI CMD to fixed copy test issue. Michelle
[3]. Modified UI function for 1024x768.
[4]. Hide [Config Hub] button, enable by Function key [ F7 ].
[5]. Added Force ID function and support Flash Index function .
[6]. Added support press [ 0 ] key to start Initial-Device.
Flash DB :
[1]. Add Micron M51A supported. These Part Numbers are
MT29F32G08FAA, MT29F32G08GAA, MT29F32G08GAA and
MT29F64G08KAA.
[2]. Fix JS29F16B08HCND1 parameter.
2011/11/03
4
Innostor Technology Corporation
2011/11/03
5
Innostor Technology Corporation
2011/11/03
6
Innostor Technology Corporation
2011/11/03
7
Innostor Technology Corporation
2011/11/03
8