Professional Documents
Culture Documents
QA
QA
JC
JNE
What is the content of the destination operand and the condition of the status flags after
executing LAHF instruction assuming the value of the flags SF=1, ZF=1, AF=0, PF=1, CF=0.
ah=c4; sf=1; zf=1; af=0; pf=1; cf=0; of=0
It is a flag instruction that pushes the status register onto the stack.
PUSHF
JG
CX
What is the content of the destination operand and the condition of the status flags
after executing the following instructions.
MOV AH,ABH
SAHF
CMC
assuming the value of the flags SF=1, ZF=1, AF=0, PF=1, CF=0.
Group of answer choices
JA
It is a flag instruction that transfers the content AH to flags on its respective bits.
LAHF
What is the content of the destination operand and the condition of the status flags
after executing LAHF instruction assuming the value of the flags SF=1, ZF=1, AF=0,
PF=1, CF=0.
Group of answer choices
invalid
It is a category of 8086 instruction that facilitated the movement of data either between
registers or between a register and main memory
True
pop
valid
It is a data transfer instruction used for transferring the effective address (not data) of
the source operand to the destination operand.
Group of answer choices
lea
invalid
What is the content of the destination operand and the condition of the status flags
after executing the following instructions.
MOV AH,ABH
SAHF
STC
assuming the value of the flags SF=1, ZF=1, AF=0, PF=1, CF=0.
What is the content of the destination operand and the condition of the status flags after
executing LAHF instruction assuming the value of the flags SF=1, ZF=1, AF=0, PF=1, CF=0.
True
PUSHF
CMC
POPF
JMP
JGE
STC
It is a flag instruction that clears the content of the carry flag.
Group of answer choices
CLC
JBE