Professional Documents
Culture Documents
Osmolastic en
Osmolastic en
Osmolastic en
Marking
Reference standard:
EN1504-2
Waterproofing mortar
GRANTS LEED CREDITS
CHARACTERISTICS
CARATTERISTICHE IMPATTO
ENVIRONMENTAL
AMBIENTALE MODALITÀ
METHODD’IMPIEGO
OF USE PRECAUTIONS
AVVERTENZE
WATER
BASE MIX APPLY BY APPLY MECHANICALLY STOCCARE
STORAGE:IN STOCCAGGIO:
STORAGE: KEEP
TWO-COMPONENT
BICOMPONENTE WATERPROOFING
IMPERMEABILE ECO GREEN MESCOLARE MECCANICAMENTE APPLICAZIONE CON SPATOLA
ACQUA
BASED MECHANICALLY INOX SPATULA USING A SPRAYINOX
PUMP IN A DRY
LUOGO PLACE
ASCIUTTO AWAY FROM
TEME FROST
IL GELO
PROBLEMA
PROBLEM SOLUTION possible movements of the structure, such as tanks,
swimming pools, balconies, bathrooms, etc.;
WATERPROOF: OSMOLASTIC AB is a two-component elastoplastic • create a uniform surface on the concrete and as an
waterproofing coating: the first component is a premix anti carbonation protection of structures subject to
powder based on hydraulic binders, selected aggre- deformation under stress or micro cracked plaster on
gates and additives, which improve the workability and faces. The finishing that is obtained with OSMOLAS-
impermeability. The second is a latex based on special TIC is similar to colouring the exposed concrete;
synthetic polymers in aqueous dispersion. The two- • the protection of concrete surfaces subject to chemi-
component mix produces an easy-to-apply mixture cal aggression such as, for example, de-icing salts or
CRACKED CONCRETE FACES TANKS - SWIMMING POOLS featuring optimal adhesion to any kind of support. OS- sulphates;
MOLASTIC AB provides elastic waterproofing that fol- • the elastic connection between the floor slab and the
lows and absorbs the structural movements of concrete wall, thresholds and paving, piping and masonry, etc.;
without damage while being impermeable to aggressive • the waterproofing overlapping the paving and ceramic
gases in the atmosphere such as CO2-SO2. terraces, without demolishing the existing support;
• the waterproofing coating, suitable support for the lay-
ing of ceramic floors.
BALCONIES - TERRACES BATHROOMS - SHOWERS
APPLICATION FIELDS O
Concrete structures designed to withstand
mechanical or dynamic strain may be subject
OSMOLASTIC AB is used for:
• the waterproofing of structures where the long lasting ADVANTAGES
to deterioration problems such as micro seal against water is required also in conditions of • High workability and flexibility which allows
or macro cracking caused by continuous you to cover the formation of sub-base cracks
structural movements following settling of the
C
G TO
EU R O P E
AN
up to 1 mm without deterioration or damage
DIN
ground, thermal expansion and vibrations. EN to the coating.
OR
NO
AC C
RMS
These micro cracks are the main cause of • High adhesion to the various types of support.
deterioration, which may occur quite rapidly, 1504-2 PI-MC-IR • High impermeability to water.
PROTECTIVE
due to infiltrations of water or through CONCRETE SURFACES
PROTECTION
• Resistance to frost-thaw cycles, it maintains a
COATING
oxidation of the reinforcement caused by high plasticity also at low temperatures.
atmospheric chemical aggression. • Ease of application both horizontally and
Tiled ceramic floorings on old cracked
CM
G TO
EU R O P E
AN
vertically.
DIN
terrace structures are often subject to water EN • Non-toxic product.
OR
NO
AC C
RMS
METHOD OF USE
• PREPARING THE SUB-BASE (1) through chipping, brushing and washing; traces of any lumps, with good characteristics of smoothness,
The existing concrete supports or paving must be oils, dismantled parts, rust and dirt must be removed thixotropy and easy applicability.
prepared to ensure an excellent adhesion to the and the surfaces must be free from stagnated water. • APPLICATION
OSMOLASTIC AB waterproof coating. Therefore it The degraded and loose parts must be previously OSMOLASTIC AB is applied mechanically with a
is necessary to remove all the loose and flaking parts restored with RESISTO TIXO or RESISTO UNIFIX spray pump or manually with a stainless steel spa-
render (1) in order to make a uniform surface. In the tula by uniformly shaving the mix both horizontally
1 2 connectors between vertical and horizontal and in the and vertically until a maximum thickness of 2 mm is
expansion joints we advise using the COVERBAND obtained. In particularly stressed areas we advise the
ADHESIVE or COVERBAND joint covering sealing reinforcement of the OSMOLASTIC AB coating with
tape (2). RETINVETRO PER RASANTI with 4×5 mm mesh (4).
• PREPARATION OF THE MIX During the warmer months of the year, to avoid quick
Pour component B (liquid) into the suitable container, drying we advise wetting the sub-base of application
and gradually add component A (powder) mixing without creating layers of water.
with a low speed mechanical stirrer (3), avoiding air
bubbles, until a smooth mixture is obtained without (See following)
(See previous)
In the renovation of old paving, apply the adhesive closed original containers.
• SUBSEQUENT FINISHING AND PROCESSES FLEXBOND or GRANICOL AB RAPID after the harde- • Do not add cement or aggregates to the mix.
Painting with two coats of ELASTOLIQUID S is pos- ning of the waterproof layer. • Do not apply OSMOLASTIC AB with a thickness
sible to improve the resistance to aggressive agents. • COVERAGE exceeding 2 mm.
Coverage is about 1.5 kg/m2×mm. Average con- • Avoid preparing the mix manually.
3 4 sumption: about 3 kg/m2. Recommended thickness: • In case of waterproofing in negative thrust use
The advice and technical information provided, is what results from our best
and may be changed or updated by INDEX at any time without previous warning.
The figures shown are average indicative figures relevant to current production
knowledge regarding the properties and the use of the product. Considering
2 mm. OSMOSEAL.
• During the warmer months of the year it is worth-
• PRECAUTIONS while not exposing the tins to the sun.
• Do not use on metal, rubber, wood, lino or PVC • Protect from rain while setting.
surfaces or vinyl paving. • Wash the tools immediately after use.
• Do not apply at a temperature lower than +5°C; in
case of freezing, component B is no longer usable.
• Store the product in a dry and fresh place in the
PACKAGING
OSMOLASTIC AB
20 kg pail
- Component A: 25-kg Sack
- Component B: 8.7-kg can
• FOR ANY FURTHER INFORMATION OR ADVICE ON PARTICULAR APPLICATIONS, CONTACT OUR TECHNICAL OFFICE • IN ORDER TO CORRECTLY USE OUR PRODUCTS, REFER TO INDEX TECHNICAL SPECIFICATIONS •
Cr - 1.000 - 10/2014ing-3/2014ita
Internet: www.index-spa.com
Informazioni Tecniche Commerciali
tecom@indexspa.it
Amministrazione e Segreteria
index@indexspa.it
Via G. Rossini, 22 - 37060 Castel D’Azzano (VR) - Italy - C.P.67 Index Export Dept.
T. +39 045 8546201 - F. +39 045 518390 index.export@indexspa.it socio del GBC Italia
© INDEX