Professional Documents
Culture Documents
2007 Compatibility en
2007 Compatibility en
2007 Compatibility en
This information was updated on February 20, 2006. Shimano makes no warranty
with respect to this information, including without limitation any warranty on the
accuracy of measures, specifications and compatibility of the current products.
Regarding any modification and new product information after February 20, 2006,
please refer to the Shimano Business Customer Web Site or directly contact the
sales person of our company.
2006-2007
Products compatibility information
8-Speed LinkGlide
Cassette sprocket (CS) Rear derailleur (RD) Chain (CN)
E
Combination & Interchangeability
The full performance of LinkGlide will not be realized in combinations other than these.
Also, HG performance will be reduced if RD-C505, C531 and C810
NE RD-M761
W RD-M570
RD-M760 RD-M530
RD-M750 RD-M511
NE RD-M601
W RD-M510
RD-M600
8-Speed HG
A
8-speed HG
MC CS-HG50-8I 8-speed
cassette
11- 30T / 11-32T
sprocket RD-M410 (SGS) CN-HG50 HG chain
CS-HG40-8I CN-HG40
NE 11- 30T / NE 11-32T / 11-34T
W W
RD-M340 Smart
CS-HG30-8I RD-CT95 Cage
11- 30T / 11-32T
CS-HG60-8I
11-34T
159
Drivetrain Interchangeability
7-speed HG
Cassette sprocket (CS) Rear derailleur (RD)
7-speed HG
CS-HG50I RD-M340 7-speed
cassette
CS-HG30I rear derailleur CN-HG50
sprocket HG chain
CN-HG40
* HG chain can only be used when using an HG compatible
crankset
7-speed HG/ZH
Cassette sprocket (CS) Rear derailleur (RD) Chain (CN)
7-speed
CS-HG-50-I 11-34T RD-T300
MGS Low normal
7-speed
CS-HG30-I 11-28T RD-CT95
rear derailleur
Multiple freewheel (MF)
E
(
Combination & Interchangeability
MF-HG37
14-28T
MF-TZ07
MF-HG40-7
MF-TZ37
MF-HG50-7
14-34T
11-34T IV
RD-T300
RD-TX70
RD-TX50
7-speed/MGS
Low normal
7/6-speed/ CN-HG50
HG / UG
H
"SMARTCAGE" CN-HG40
RD-TX30 Top normal chain
CN-UG51
6-speed HG/ZH
RC
RD-TY18
6-speed
GS/SS
A
RD-TX70 7/6-speed/
MF-TZ36 13-34T RD-TX50 "SMARTCAGE"
MF-HG40-6 Top normal
RD-TX30
5-speed UG
Multiple freewheel (MF) Rear derailleur (RD)
14-24T RD-TY15 GS/SS CN-UG51 UG chain
MF-Z015-5 14-28T 5-speed
160
Drivetrain Interchangeability
Rear drivetrain for Road bike components
ST RD CS CN FH
10-speed
DURA-ACE
ULTEGRA
105 CS-7800
10-speed ST-7801 RD-7800 CS-6600 CN-7801 FH-7801
ST-6600 RD-6600 CS-5600 CN-6600
ST-5600 RD-5600 (11, 12T TOP) CN-5600
ST-R700 CS-6600
(13, 14, 15, 16T TOP)
E
Combination & Interchangeability
9-speed
ULTEGRA
IV L I
D E
- C J A P
A N
G
R
U
.S
ANO Y P E
. PA 2682
H
T4
T
ab2-T13-1T5
IM
11T
59
H
S
ab
m
LO
CK
4 0 0 k g /c
T
1
ab-17
b-19T
ab-a21T
ab-24T
TIAGRA
9-speed
ST-R600 NE
W RD-4500 CS-HG50-9 CN-7701
NE
W ST-4500 CN-HG93 FH-6600
H
CN-HG73 FH-5600
CN-HG53 NE FH-4500
W
RC
8-speed
SORA 8
2200 series
8-speed FH-3300
ST-R500 NE
W RD-3300-A CS-HG50-8 CN-HG50 FH-2200
ST-3300 RD-3300
NE ST-3300-A
W RD-2200
A
NE ST-2200
W
Note: CS-6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination.
161
Drivetrain Interchangeability
Rear system
DURA-ACE
ST RD CS CN FH
ULTEGRA RD-7800 CS-7800 CN-7801
105 SL-R770 RD-6600 CS-6600 CN-6600 FH-7801
RD-5600 CS-5600 CN-5600
10-Speed
- C J A P
D E A
L I N
G
R
U
.S
ANO Y P E
DURA-ACE
. PA 2682
H
T4
T
ab2-T13-1T5
IM
11T
59
H
S
ab
m
LO
CK
4 0 0 k g /c
1
ab-17
b-19T
ab-a21T
ab-24T
ULTEGRA
105
TIAGRA RD-7800 CS-7700
CS-6500 CN-HG93
SL-R660 RD-6600
9-Speed RD-5600 CS-HG70-9 CN-HG73
SL-R440 CN-HG53
NE RD-4500 CS-HG50-9
W
FH-6600
FH-5600
E
NE FH-4500
Combination & Interchangeability
FH-3300
FH-2200
- C J A P
D E A
L I N
G
R
U
.S
ANO Y P E
. PA 2682
H
T4
SORA
T
ab2-T13-1T5
IM
11T
59
H
S
ab 4 0 0 k g /c
m CK
LO
T
1
ab-17
T
NE FH-R505
b-19
T
ab-a21
W
ab-24T
2200
8-Speed
SL-R440-8
NE ST-R221
W
IV
NE
W RD-3300-A
RD-3300
RD-2200
CS-HG50-8
Note: CS-6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination.
Note: FH-R505 O.L.D. 135 mm for disc brake frame.
CN-HG50
CN-HG40
H
Front system
ST FD FC BB CN
FC-7800
RC
FC-6600 SM-FC7800
FD-R770 FC-5600 SM-FC6600
DURA-ACE FC-R700 SM-FC5600 CN-7801
NE FC-R600
W
ULTEGRA SL-R770 CN-6600
105 CN-5600
FD-R773-2 FC-7803 SM-FC7800
10-Speed FC-6603 SM-FC6600
FD-R773-0 FC-5603 SM-FC5600
FC-4401 BB-ES51/30/25
A
FC-4400 BB-UN73/53/26
NE
W FD-R453
NE
W FC-4503 NE
W SM-FC4500
N EW
FC-3301 / 3301-A BB-ES51/30/25
FC-3300 BB-UN40
SORA FC-2200 BB-UN26
FD-R440A
2200
8-Speed SL-R440 NE
W
FC-3304-A BB-ES51/30/25
NE
W ST-R221
FC-3303 CN-HG50
BB-UN40
NE
W ST-R225 FC-2203 BB-UN26
FD-R443A
162
Drivetrain Interchangeability
Front drivetrain interchangeability (MTB front SIS)
SPCM (TRIPLE)
Crankset (FC) Front derailleur (FD)
CN-HG73 Mega-9 FC-C810 Rear
chain 8-speed FD-C810 Di2
Super 46-34-24T SPCM3
narrow HG
CN-HG53 FC-C505 Rear
8-speed FD-C505 SPCM3
46-34-24T
NE
W FD-M970-CL47.5
E
W
NE FC-M970 44-32-22T
NE
W FD-M970-E
(CL47.5) 44-32-24T
NE FD-M971-CL47.5
W
IV
FC-M800-2, FC-M601-2
FC-M760
FC-M580
FC-M600
FC-M530
FC-M531
32-22T
44-32-22T
FD-M760A-3
FD-M761A-6
FD-M761A-3
FD-M760-E
FD-M750
FD-M750-E
FD-M600
FD-M601
FD-M600-E
FD-M580A-3
FD-M581A-6
FD-M581A-3
FD-M581A-3
FD-M580-E
FD-M570-E
FD-M530-3
FD-M531-6
FD-M531-3
H
FD-M760A-6 FD-M580A-6 FD-M530-6
FC-M761 FD-M760A-3 FD-M580A-3 FD-M530-3
FC-M581 FD-M761A-6 FD-M581A-6 FD-M531-6
48-36-26T
FC-M531 FD-M761A-3 FD-M581A-3 FD-M531-3
RC
FC-M530 FD-M750
FD-M751
NE FC-M442 FD-M531-3
W
FD-C510
FC-C510 46-34-24T
FD-C511
A
FD-M530-6 FD-M511
NE
W FC-M443
FD-M530-3 FD-M510
FC-M470 48-36-26T
FD-M531-6
FC-M540
FD-M531-3
FC-M805-3 44-32-22T
FD-M805
FD-M806
FC-M805-2 32-22T
163
Drivetrain Interchangeability
Rear
FC-T303 7/8- 48-38-28T FD-T301
speed
CN-HG50 NE
W FC-M410
OCTALINK FD-M330
CN-HG40
CN-UG51 UG / HG FC-M410 Rear FD-M330-E
chain FC-M411 7/8- 42-32-22T FD-M410
speed
NE FC-M341 NE FD-M411
W W
OCTALINK FD-M410-E
FC-MC09
Rear
E
W FC-M411 7/8- 48-38-28T
FD-M410
NE
speed NE
W FD-M411
Combination & Interchangeability
IV NE
NE
W
W
FC-M341
OCTALINK
FC-M341
FC-TX70
Rear
7/8-
speed
Rear
7/8-
speed
48-38-28T
42-34-24T
NE
W
FD-M410
FD-M411
FD-T300
H
Rear
FC-TX71 7/8- 48-38-28T FD-C102
speed
Rear FD-TY30
FC-TX71 7/6- 48-38-28T FD-C051
RC
speed
Rear FD-C050
FC-TX70 7/6- 42-34-24T
speed FD-TY10
* When using the front derailleur designed for a 7-speed system on an 8-speed system, the front
derailleur plate may interfere with the chain even if it's installed correctly.
A
164
Drivetrain Interchangeability
Front drivetrain interchangeability (Road bike components)
ST FD FC BB CN
DURA-ACE
7800 series
ULTEGRA
6600 series
ST-7801 FD-7800
Double ST-6600 FD-6600 FC-7800 SM-FC7800
10-Speed FC-6600 *2
FC-5600 *2 SM-FC6600
105 ST-5600 FC-R700 *2
5600 series FD-5600 NE FC-R600
W SM-FC5600
ST-R700 CN-7801
CN-6600
CN-5600
DURA-ACE
7803 series FC-7803 SM-FC7800
E
ULTEGRA FD-7803
ST-7803 FD-6603 FC-6603 *2 SM-FC6600
6603 series 52-39-30T
ST-6603
Double
9-Speed
ST-7700-B
ST-7700-C
ST-6510
ST-5510
ST-4400
IV
FD-5603
FD-7700
FD-6500
FD-5501
FD-4400
50-39-30T
FC-6500
FC-5502
SM-FC5600
BB-7700
BB-6500
BB-5500
H
FC-4401 BB-ES51/30/25
ST-R600
FC-4400 BB-UN73/53/26
NE
W ST-4500 NE
W FD-4500
NE
W FC-4500 NE
W SM-FC4500
NE
W FC-4550
RC
FC-4403 BB-UN73/53/26
A
NE
W ST-4500 NE
W FD-4503 NE
W FC-4503 NE
W SM-FC4500
BB-ES51
2200 BB-ES30
SORA FC-3301 BB-ES25
Double FD-3300
ST-R500
8-Speed MC ST-3300-A FD-2200 BB-UN73
FC-3300
FC-2200 *1 BB-UN53
BB-UN26 CN-7401
CN-HG90
BB-ES51 CN-HG91
FC-3304 BB-ES30 CN-HG70
2200 BB-ES25 CN-HG50
SORA ST-3304-A FD-3304
MC
FD-2203
Triple FC-3303
BB-UN73
8-Speed FC-2203 *1 BB-UN53
BB-UN26
The allowable combinations of front derailleurs and rear derailleurs depend on the difference in the number of teeth
of the gears and the shape of the front derailleur plate.
If the conditions given below are not satisfied, then the desired shiftability may not be obtained.
FC (top gear) - (low gear) < FD (top and low capacity)
=
FC (top gear) - (middle gear) > FD (minimum difference in teeth number between top and middle)
=
Front derailleurs and the number of teeth for corresponding cranksets are given in the chart below.
E
FD-M410-E*
Combination & Interchangeability
Top gear
teeth number 44T 44/48T 48/44T 44/46T 44/48T 42/48T 48T 42T 48T
Top-Middle
min. teeth
difference
Capacity
12T
22T
Crankset specifications
44-32-22
32-22
22T
IV
12T
22T
12T
22T
12T
22T
12T
22T
SPCM
(46/34/24T)
10T
20T
20T
8T
18T
10T
22T
H
For Super Narrow chain For HG Chain
NE
W FC-M970 FC-M761 FC-C810 FC-C600 FC-M805-2 FC-M805-1 FC-C530 FC-M410-8 FC-T300S FC-T303
(44-32-24) FC-M581 FC-C505 FC-M800-2 FC-M800-1 FC-M410 FC-TY40 FC-TY33
*option
RC
NE
Top gear 44T 48T SPCM Bash Guard 34/38/42/46 38 / 33T 42T 42T 48T
SPCM
Middle gear 32T 36T 46 / 34T 32T 32T 34T 38T
46/34/24T (-)
Low gear 22T 26T (-) 22T 22T 24T 28T
NOTE: When using the front derailleur designed for a 7-speed system on an 8-speed system, the front derailleur plate may interfere
with the chain even if its installed correctly.
Pro-Set alignment block
Gear teeth should
come within this
How to set position for FC with bigger top gear chain ring range
in the same series. Pro-Set gauge
A
1) set A
2) Check if outer plate and bigger chainring have clearance 1 mm
166
Drivetrain Interchangeability
Front derailleur and Chain line
The Shimano line-up for front derailleurs and the chainlines they support are given in the chart below.
NE
W FD-M970-E 50 mm
SAINT FD-M805, FD-M806 57.5 mm (shell width of 83 mm)
FD-M750 / M751
FD-M750-E 47.5 / 50 mm
DEORE XT FD-M760A-6 / M760A-3
FD-M761A-6 / M761A-3
FD-M760-E
E
FD-M580A-6 / M580A-3
DEORE
ALIVIO
DEORE
NE
W
FD-M601
FD-M530-6 / M530-3
FD-M531-6 / M531-3
FD-M411-6 / M411-3
FD-M410-6 / M410-3 / M410-E
FD-M511/ M510
IV 47.5 / 50 mm
For the E-type (BB mounting front derailleur): 47.5 mm (shell width of 68 mm)
50 mm (shell width of 73 mm)
H
Non-Series FD-MC21 When using the FD-MC18SE with a seat tube of diameter 34.9 mm (L)
the chainstay angle should be between 66 and 69
FD-M330 47.5 / 50 mm
ACERA For the E-type (BB mounting front derailleur):
47.5 mm (shell width of 68 mm) the chainstay angle should
FD-M330-E be between 66 and 69
50 mm (shell width of 73 mm)
RC
FD-C101-E With seat tube of diameter 34.9 mm (L), the chainstay angle should be between 66 and 69
FD-C102 For the E-type (BB mounting front derailleur): 47.5 mm (shell width of 68 mm)
C-series FD-C050 50 mm (shell width of 73 mm)
For the E-type (BB mounting front derailleur):
FD-C102 47.5 mm (shell width of 68 mm) 73 mm shell width/66 and 69
50 mm (shell width of 73 mm)
A
Shimano front derailleurs, with the exception of some of the C-series and the Tourney class, support chain lines of 47.5 and
50 mm. The Tourney front derailleurs and corresponding chain lines are given in the chart below.
FD-TY15GS 47.5 / 50 mm
(down pull only)
TOURNEY 15
FD-TY15SS
43.5 / 45 mm
(down pull only)
TOURNEY 10 FD-TY10
FD-TZ30 47.5 / 50 mm
TZ
FD-TZ31
167
Drivetrain Interchangeability
In order to use SIS to its full extent, the required correct chain line, along with the crankset and bottom bracket
required to obtain that, are given in the chart below.
E
Combination & Interchangeability
FC-M580 X include
Deore LX Chainline: 50 mm
FC-M581 X X*** include
FC-M601-2
HONE X include
FC-M600
Deore
FC-M530
FC-M531
FC-M540
FC-M540-K
FC-M470 (44T)
FC-M470 (48T)
NE FC-M443-8
W
X
X
X
X
X
X
X
IV X***
X
X
X
X
BB-ES51/30/25
BB-ES51/30/25-AK
BB-ES51/30/25(-E)
BB-ES51/30-K/25
BB-ES51/30(-K)/25
BB-ES51/30(-K)/25
BB-ES30 / 25-AK
–
–
113
121
121
121
121
113
121AK
118
126
126
126
126
-
-
-
-
-
-
-
-
-
-
121K
121K
121K
121AK
H
NE FC-M443
W X X BB-UN26 /LP28(-K) 117.5 LL123 - 117.5K
N E W FC-M442-8 X BB-ES30 / 25(-E) 113 118 - -
NE FC-M442
W X BB-UN26 /LP28(-E) MM110 LL113 - -
FC-C810 X X*** - 130 - -
BB-UN26
FC-C505 X X*** - 130 - -
FC-C600 X X BB-UN26-K - - 117.5 -
RC
N
FC-M341-8 (42T) X X BB-ES30 / 25(-E) - 126 - -
Non-Series
FC-M341 (42T) X X*** BB-UN26 /LP28(-K) - LL123 - -
FC-MC09 X X*** BB-UN26(-K) - LL123 - -
Tourney FC-TX70 / TX71 X X BB-UN26(-K) D-NL(122.5) - - D-NL(122.5)
Note: If using a chain case, select a BB- (-K) /-K bottom bracket. X: Yes
If using an E-type front derailleur, select a BB- (-E) bottom bracket.
* without chaincase stay
** BB-UN25 bottom brackets parts for FC-C510 includes 1.8 mm and 0.7 mm thickness spacers.
In case of without chain case, use both spacers between hanger and right hand BB adaptor.
In case of with chain case, use 0.7 mm thickness spacer only. Put chain case stay with 0.7 mm thickness spacer between hanger and right hand BB adaptor.
*** Chain case stay thickness should be 1.5 mm to 2.1 mm.
**** YL117: Chainline 44 +t D-NL: Chianline 47+t
117.5: Chianline 46 +t D-EL: Chianline 49.5 + t
*1: Refer frame requirement session of ATB crankset dimension X.
168
Drivetrain Interchangeability
Capreo series components
The combinations of the front chainwheel and the bottom bracket to obtain proper chain line, which are necessary for
the SIS (= Shimano Indexed System) to function well, are presented in the following chart.
Series FC BB Chain Line & Axle mark
type of Crank 46.0 48.5 50.0 52.5+t
Model No. Model No. * This specification can be used
Spline Square Chaincase mm mm mm mm
without the chain case as
BB-UN40 MM110 LL113 - - 52.5 mm chain line. In that
Capreo case, a space is to be left
BB-UN40-K - - - *117.5 between the shell and the
FC-F700 X X
BB-UN26 MM110 LL113 YL117 - adapter on the left side of
the BB, but there is no
BB-UN26-K - - - *117.5 problem in actual use.
X: Yes
E
The dimensions of the eight serrations on the BB are shown below.
The dimensions for BB-ES71/51/30 are different from those for BB-M952/7700/7703/7710/6500/5500.
BB-ES71
BB-ES51
BB-ES30
BB-C900
NE BB-ES25
W
IV BB-M952
BB-7700
BB-7703
BB-7710
BB-6500
BB-5500
H
9 5
2.8
2.2
RC
A
169
Drivetrain Interchangeability
The allowable combinations for the Shimano chain (CN), chainrings (FC), and cassette sprockets (CS) are given in the
chart below. These chains are available in order to match the type of drivetrain. Select the combination you desire
after checking the chart below.
Mega-9 LG HG
NE
W FC-M970
FC-M805
FC-M800
NE
W CS-M970 FC-M760 CS-LG50 FC-C810 CS-HG40-8I FC-M410
FC-M761
CS-M960 FC-C505 CS-HG60-I FC-M411
FC-M600
FC/CS CS-M760 FC-M601 FC-C530 CS-HG50-8I FC-M341
E
CS-M580 FC-M581 FC-C510 CS-HG50-I FC-MC09
FC-M580 FC-T300-S
CS-HG70-9 CS-HG30-I
Combination & Interchangeability
FC-M540
CS-HG50-9 FC-M530 CS-HG30-8I FC-T303
FC-M531 FC-TX70
Mega-9
Super
Narrow chain
IV FC-M470
NE FC-M443
W
NE FC-M442
W
FC-C600
FC-TX71
H
CN-7701 Good Good Good Good Not good Not good
CN-HG93
CN-HG73
CN-HG53
Chain
RC
HG Chain
CN-HG50 Not good Not good Not good Not good Good Good
CN-HG40
A
170
Drivetrain Interchangeability
Spoke protector
E
CP-FH50 CP-FH53
CP-FH75*
6.3” CP-IF53****
for 36H hub
for 10 speed
36H hub
5.4”
ø109
ø109
CP-FH01
CP-FH06
CP-FH30-8
IV
For 8 speed
(24T – 26T)
CP-FH31
(26T – 28T)
H
CP-WH71 for WH-7701 / R540
CP-WH10/11 *** for WH-M965 / M765 / M565 / M540 / T565 / T560
INTEGO CP-IF53****
36H Freehub
for IF-C530
INTEGO CP-IF52****
32H Freehub
* Using with light alloy sprocket carrier ** Using with standard cassette sprocket
*** Compatible cassette sprocket
CP-WH11 / WH13 / WH15: for CS-M750 / M760 / M960 (11-32T)
CP-WH10 / WH12 / WH14: for CS-M970 (11-32T / 11-34T / 12-34T)
CS-M750 / M760 / M960 (12-34T /11-34T)
CS-M953 (12-34T)
CS-HG70-9 (11-32T /11-34T)
CS-HG50-9 (11-32T)
Note: A spoke protector is included with the cassette sprocket CS-LG50.
NE
W WH-7801-
Carbon50
WH-7801- FH-6600/ W NE
W
NE WH-5600
Carbon FH-5600/
W
WH-6600 W
Type Model No. Tooth WH-7801-SL NE W NE
WH-R500 WH-7701 WH-R540 WH-7700 WH-6500 WH-R535
WH-7801 FH-4500/ NE WH-R561
WH-R601
FH-7801 8/9 speed WH-R560
FH-7800 freehub WH-R600 WH-R550
WH-7800
11 – 21 X X X X X X — — — —
CS-7800
12 – 21 X X X X X X X — — —
11 – 23 X X X X X X X — — —
12 – 23 X X X X X X X — — —
10 speed standard
CS-7800
CS-6600 12 – 25 X X X X X X X X X —
12 – 27 X X X X X X X X X —
E
Combination & Interchangeability
11 – 23 X X X X X X X X X —
NEW 11 – 25 X X X X X X X X X —
CS-5600
12 – 25 X X X X X X X X X —
12 – 27 X
IV X X X X X X X X —
10 speed JUNIOR
13 – 25 — X — X X X X X X —
14 – 25 — X — X X X X X X —
CS-6600
15 – 25 — X — X X X X X X —
16 – 27 — X — X X X X X X —
X= —=
H
Be aware that freehub (FH) and wheel (WH) compatibility with CS-6600 might differ depending on the tooth
combination.
*The tooth combination for CS-6600 JUNIOR type cannot be installed on FH / WH-7801.
RC
A 1 mm spacer is required when combining CS-7800 and CS-6600 (except junior types) with a 8/9 speed freehub (FH)
and FH-6600.
Spacer
CS-7800 and CS-6600
(standard 11 tooth and
CS-7800 and 12-tooth top gear tooth
CS-6600 (all) combination)
FH-7700 FH-7801
A
CS-7800 (all) Deep serration Shallow serration CS-6600 (13, 14, 15, 16
CS-6600 (Standard 11T No! top gear combinations
FH-7801/ WH-7801/
and 12T top gear WH-6600 / R601/ R600 for JUNIOR type)
combinations)
CS-5600 (all) Shallow serration *The serration depth is
the same as for the 8
and 9 speed cassette
sprocket.
FH-6600 / FH-5600
8 / 9 speed FH / WH
Note: CS-6600 (14 – 25, 15 – 25, 16 – 27) cannot work with tripple front drive system.
If combine, bad shifting performance could be happend.
172
Disc brake
Disc brake
Combination Chart (Hydraulic Disc)
Series Caliper Mount type Brake Lever Roter PAD (option) Hose Remarks
BR-M975 International NEW NE SM-RT97L
W
W
NE standard ST-M975 NE SM-RT97M M07Ti Resin
W
XTR (M06Ti Metal) SM-BH59
NE SM-RT97
W W
NE
W NE
BR-M975P Post mount BL-M975 *3
NE SM-RT97SS
W
E
*2 Front mount: International
IV
ST-M585 M07-S resin *2 Front mount: International
Deore LX BR-M585 BL-M585 SM-RT63 (M06 Metal) standard / Post mount
*2 SM-RT62-M SM-BH59 Rear mount: International
ST-M600 SM-RT62-L M06 Metal
HONE BR-M601 BL-M525 (M07-S resin) standard
Rotor Specification
Series Model No. Outside Diameter CENTERLOCK System Oversized PCD
CENTERLOCK System 44 mm
NE
W SM-RT97L 203 mm X - -
A
N EW SM-RT97M 180 mm X - -
XTR NE
W SM-RT97 160 mm X - -
NE
W SM-RT97SS *3 140 mm X - -
SM-RT96 160 mm X - -
SM-RT80 203 mm - X -
SAINT SM-RT80S 160 mm - X -
SM-RT75-DH 203 mm - - X
SM-RT77L 203 mm X - -
SM-RT77 160 mm X - -
Deore XT SM-RT75S 160 mm - - X
SM-RT75M 170 mm - - X
NE
W SM-RT75MA 180 mm - - X
SM-RT63 160 mm X - -
Deore LX -
SM-RT62 160 mm X -
HONE
SM-RT62M 180 mm X - -
Deore
SM-RT62L 203 mm X - -
Deore/NEXAVE SM-RT61 160 mm - - X
NE
W ST-M975/ BR-M975
NE
WBL-M975
XTR ST-M585 / BR-M585
Deore LX SM-BH59 BL-M585 Resin 1000, 1400, 1800 mm Cutable
HONE ST-M600 / BR-M601
BL-M525
NE BL-S500 / BR-S500
W
E
ST-M535 / BR-M535
NEXAVE SM-BH59 BL-M535 900, 1300, 1700 mm Cutable
Combination & Interchangeability
BL / BR-M525
IV
Combination Chart (Mechanical Disc)
NE SM-RT53
W
* Front mount: International standard / Post mount Rear mount: International standard
** Front & Rear mount: International standard
A
NE
W BR-M415 Good Not good Not good Good
NE
W BR-R505 Road ST / BL-R770 / BL-R550 / ST-R221 / ST-R225
174
V-BRAKE and Canti-brake
V-BRAKE and Canti-brake
Interchangeability between brake systems
Depending on the brake and brake lever combination to be used, the relationship between the input at the brake
lever and the actual braking force output at the wheels is very easily affected.
Be very careful when combining a brake and brake lever. Incorrect combinations can cause accidents or insufficient
braking forces due to improper cable strokes. Be sure to carefully consult the chart below and select the brake and the
matching brake lever.
Brakes
V-BRAKE
W BR-M970 BR-M430 With power
E
NE
No!
IV No!
No!
No!
No!
H
Note:1
C600 NE ST-M405
W BL-M420 Levers
ST-M410 ST-T300-S
ST-EF35 NE
W ST-M405 (4finger)
ST-EF50 ST-EF50 (4finger)
SB-C055A SB-C055A (4finger)
SB-8S20 BL-C800
BL-IM60 BL-IM65
Brake levers
A
Note 1: This combination will not provide the sufficient amount of braking force.
175
V-BRAKE and Canti-brake
V-position
Good
V
V-brake with power modulator
V
C R
Not
good
E
Combination & Interchangeability
Not
brake-position good
V
CR
Not
good
V-brake without power modulator
A
Good
Roller brake / Canti brake
WARNING:
If the mode is not matched to the type of brake being used, this could result in
inadequate or excessive braking power. Please proceed with caution when selecting the
correct mode for the corresponding brake.
176
V-BRAKE and Canti-brake
Four finger brake levers such as ST-R221/ R225 / R223 brake levers are equipped with a switch to change between the
V-brake with modulator mode and the caliper brake, canti brake or roller brake mode.
V-position
Good
V V-brake with power modulator
V-brake + SM-PM40
V
C R
Not
good
V-brake without power modulator
E
Not
RC
V-brake + SM-PM40
V
C R
CR
Not
good
V-brake without power modulator
A
Good
Cariper brake / Roller brake / canti brake
WARNING:
If the mode is not matched to the type of brake being used, this could result in
inadequate or excessive braking power. Please proceed with caution when selecting the
correct mode for the corresponding brake.
177
Hub roller brake
Interchangeability between hub and roller brake
: Recommended combination
Combination & Interchangeability
E
: Usable
HB-IM30
HB-IM20-EC
HB-C052C-IM
Modulator Level
20-24inches
20-24inches
20-24inches
IV
type
NUT
NUT
NUT
BR-IM75-F BR-IM70-F BR-IM50-F
good
BR-IM41-F BR-C050-IM-F
H
Hub roller brake and Hub Dynamo w/modulator
Model NO. Modulator Level type BR-IM75-F BR-IM70-F BR-IM50-F BR-IM41-F BR-C050-IM-F
RC
: Recommended combination
: Usable
178
Brake shoe
Brake shoe
Brake shoe (for V-brake and Canti-brake)
Brake/Shoe Iine-up
M70R2 M70CT4 S70C
M70R2 (Severe Ceramic M70T3 M70T4 (Severe M70W M65T3 M65T4 S70C (Severe S70T S65T
Condition Condition Condition
shoe) shoe) shoe)
NE
W BR-M970 Standard - Option - - - - - - - - - -
BR-M960 Standard - Option - - - - - - - - - -
BR-M760 Option - Option Low noise Option - - - - Standard - - -
BR-M580 - - - Option Option - - - - Standard - - -
BR-M530 - - - Option Option - - - - - - Standard -
BR-M431 Option - - - - - - - - Standard - - -
- - - - - - - Option Option - - - Standard
E
BR-M421
NE
W BR-MX70 - - - Option Option - - - - - Standard - -
Shoe characteristics
M70R2
Cartridge
shoe
X
IV M-system
X
Length
70 mm
Threaded
shoe post
X
Brake shoe characteristics
M70CT4
X X 70 mm X Cartridge shoe with M70T4
A
S70C X - 70 mm X
Performs well in dry conditions and tends to be
S70T - - 70 mm X low noise. Wears in muddy conditions.
S65T - - 65 mm X
S70C
(Severe Condition shoe) X - 70 mm X +1mm thicker shoe with S70C
X: Yes
X: Yes 179
Brake shoe (for road bikes)
R55C2 R55C +1 R55C R55C for R55C for M50T R50T R50T2
Carbon rim Ceramic rim
DURA-ACE BR-7800 Standard - - Option Option - - -
ULTEGRA BR-6600 Standard - - Option Option - - -
105 BR-5600 Standard - - Option Option - - -
non-series BR-R600 - Standard - Option Option - - -
TIAGRA NE
W BR-4500 - - - - - - - Standard
SORA BR-3300 - - - - - Option Standard -
non-series BR-A550-57 - - - - - Option Standard -
E
Performs well in dry conditions and tends to be low noise.
R55C2 X - 55 mm Highly resistant to wear in rainy conditions.
Combination & Interchangeability
R55C
R55C
for Carbon rim
R55C
for Ceramic rim
M50T
X
-
IV -
X
55 mm
55 mm
55 mm
50 mm
Performs well in dry conditions and tends to be
low noise. Wear in rainy conditions.
X: Yes
A
180
Brake pad
Brake pad
Brake pad line-up (for disc brake)
M01 M02 M03 M04 M05 M06Ti M06 M07Ti M07 M07-S M08 C01
Model NO. type Sintered Resin Sintered Resin Resin Sintered Sintered Resin Resin Resin Resin Sintered
Metal Metal Metal Metal Metal
W BR-M975 Hydraulic option Standard
NE
BR-M975P
BR-M800 Hydraulic Standard option
E
NE
W BR-S500 Hydraulic Standard
NE
W BR-M415 Mechanical Standard
IV
BR-M495 Mechanical Standard
BR-M465 Mechanical Standard
BR-C901 Hydraulic Standard
NE
W BR-R505 Mechanical Standard
M01/ M03 / M06: Longer pad-life, good for anti-fade, good constancy either dry / wet. May cause noise while braking.
M02 / M04 / M05 / M07 / M07-S: Same level performance as metal pad. Shorter pad-life than metal.
H
M06Ti / M07Ti: Titanium plate
C01: Easy, controllable metal pad, good for trekking use.
RC
A
181
D i s c br a k e m o u n t a d a pt e r
D is c br a k e m o u n t a d a pt e r a pplica t i o n
Front = F
M ount adapter Rear = R
Small parts Rotor size
SM - M A - F 203 S / P
E
Combination & Interchangeability
IV Post = P
Boxxer = B
M arzocchi 20 mm A xle = Z
(QR 20 Plus-DH INTL STD)
H
M ount adapter / M odel NO.
SM -M A -F203S/S
SM -M A -F203S/P
RC
SM -M A -F203S/B
SM -M A -F203S/Z
SM -M A -F203P/S
SM -M A -F203P/P
SM -M A -F203P/B
SM -M A -F203P/Z
SM -M A -F180S/S
A
SM -M A -F180S/P
SM -M A -F180P/S
SM -M A -F180P/P
SM -M A -F170S/P
SM -M A -F160P/S
SM -M A -F160P/Z
SM -M A -R203S/S
SM -M A -R203P/S
SM -M A -R180S/S
SM -M A -R180P/S
SM -M A -R160P/S
182
Disc brake mount adapter
BR-M975/M975P Disc brake mount adapter application table
Please note we have 3 kinds of Calipers and refer following chart for adapter combination.
Mount type Original specification without mount adapter
Caliper A A-Standard For Front 160 mm and for rear 140 mm Rotor use
Caliper B A-Standard For Rear 160 mm Rotor use
NE
W BR-M975 for A-standara mount Direct attachment SM-MA-F180S/S SM-MA-F203S/S
A-Standard
CALIPER
E
ROTOR
A-Standard NE
W BR-M975
IV
Marzocchi 20 mm axle SM-MA-F203S/Z
CALIPER
NE
W BR-M975
A-Standard Direct attachment SM-MA-R180S/S SM-MA-R203S/S
Caliper B
RC
CALIPER
A-Standard NE
W BR-M975
Direct attachment
Caliper A
Post-Mount NE
W BR-M975P SM-MA-F160P/S SM-MA-R160P/S SM-MA-R180P/S SM-MA-R203P/S
183
Disc brake mount adapter
E
< For front >
Combination & Interchangeability
Mount-type
Rotor
Model MARZOCCHI 20 mm Axle
diameter A-standard BOXXER-type POST-type
(QR 20 Plus-DH INTL STD)
NE
NE
W
W
BR-M465
BR-M415
BR-R505
SM-MA-F160P/Z
SM-MA-F203P/B SM-MA-F203P/P
SM-MA-F180P/P
Direct attach
H
Model Rotor diameter A-standard
203 SM-MA-R203P/S
BR-M465
180 SM-MA-R180P/S
NE
W BR-M415
160 M475 Adapter ( R )
RC
NE
W BR-R505 160 M475 Adapter ( R )
A
184