Professional Documents
Culture Documents
NailorCatalog GrilleRegisterEggcrate516167EC
NailorCatalog GrilleRegisterEggcrate516167EC
NailorCatalog GrilleRegisterEggcrate516167EC
Suffix '- OA' adds an aluminum OBD Suffix '- OA' adds an aluminum OBD
Steel Frame – Model 61EC See page G89 Steel – Model 61PR See page G97
Suffix '- O' adds a steel OBD Suffix '- O' adds a steel OBD
Stainless Steel – Model 67EC See page G91 Stainless Steel – Model 67PR See page G99
Suffix '- O' adds a stainless steel OBD. Suffix '- O' adds a stainless steel OBD
G8
LOUVERED FACE GRILLES AND REGISTERS
ALUMINUM
DOUBLE DEFLECTION
GRILLES AND REGISTERS
• SUPPLY
Models:
51DV and 51DH
• Suffix '- O' adds a steel opposed
blade damper
• Suffix '- OA' adds an aluminum
opposed blade damper
G Model 51DV
Models 51DV and 51DH Double Deflection Supply Grilles and Registers are recommended for application in systems
requiring maximum flexibility. The front set of blades has the greatest effect on the air pattern and therefore should be selected
GRILLES AND REGISTERS
based on particular requirements. Vertical front blades will control the spread and throw distance of the air pattern whereas
horizontal front blades will control the rise and drop of the air pattern, typically directing warm air downwards or cool air upwards
along the ceiling.
The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average
capacity of 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
FEATURES:
• High quality, extruded aluminum • Streamlined shaped extruded blades • AW Appliance White baked enamel
construction. on 3/4" (19) centers. Blades positively finish is standard. Other finishes are
• 1 1/4" (32) wide face border with a hold deflection setting under all available.
1" (25) overlap margin standard, conditions of velocity and pressure. • Available in sizes from 4" x 4" to
furnished with countersunk screw • Steel or aluminum integral dampers are 48" x 48" (102 x 102 to 1219 x 1219)
holes and mounting screws. opposed blade design with screwdriver in single section construction. Multiple
NF Narrow Frame with 1" (25) face slot operator. section assemblies are available.
border optional. Concealed mounting • Adjustable air pattern - Blades are
is optional. friction pivoted and easily adjusted to
• Rigid, heavy gauge extruded frames provide desired spread or deflection.
with reinforced mitered corners.
OPTIONAL OPTIONAL
OPPOSED OPPOSED
1 1/4" (32) FACE 1 1/4" (32) FACE
BORDER STANDARD 1 13/16" (46) BLADE BORDER STANDARD 1 13/16" (46) BLADE
DAMPER DAMPER
Model 51DV Vertical Front Blades Model 51DH Horizontal Front Blades
G14
EGGCRATE RETURN AND EXHAUST GRILLES
ALUMINUM EGGCRATE
GRILLES AND REGISTERS
• EXHAUST AND RETURN
Model:
51EC
• Suffix '- O' adds a steel opposed
blade damper
• Suffix '- OA' adds an aluminum
opposed blade damper
Model 51EC Grilles and Registers have grid cores capable of transferring or returning high air volumes at minimum pressure
requirements. They match in appearance the grid louvers on parabolic light fixtures and are available to suit both lay-in T-Bar
FEATURES:
• Frame / border Type S has a 1 1/4" • Grid cores are aluminum. Standard • AW Appliance White baked enamel
(32) face border with a 1" (25) overlap core size is 1/2" x 1/2" x 1/2" (13 x 13 x finish is standard. Other finishes are
margin, furnished with countersunk 13) with mechanically locked-in available.
screw holes and mounting screws. Type margins, or available as core only. • Available from 4" x 4" to 48" x 48" (102
NF Narrow frame with 1" (25) face Optional core sizes are 1/2" x 1/2" x 1" x 102 to 1219 x 1219) in most models.
border optional. Concealed mounting is (13 x 13 x 25) and 1" x 1" x 1" (25 x 25
optional. x 25).
• Aluminum construction – heavy • Steel or aluminum integral dampers
gauge extruded aluminum frames are opposed blade design with a
mechanically interlocked with reinforced screwdriver slot operator.
mitered corners.
G87
EGGCRATE RETURN AND EXHAUST GRILLES
Dimensional Data
51EC Series Eggcrate Return and Exhaust
NOMINAL + 1 3/4" (44) STD. * LISTED SIZE = DUCT SIZE D
LISTED SIZE (D) - 1/4" (6)
OPTIONAL
OPPOSED
BLADE
F
*
DAMPER
NOMINAL + 1 3/4" (44) STD.
G * Optional Type NF Narrow frame with 1" (25) face border and a 3/4"
(19) overlap margin. O.A. flange to flange dim. = listed size + 1 1/4" (32).
1 1/4" (32) FACE BORDER STANDARD *
Frame / Border Type S – Surface Mount
GRILLES AND REGISTERS
OPTIONAL
OPPOSED
BLADE
DAMPER F
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
OPTIONAL
OPPOSED
BLADE
DAMPER F CM = CEILING MODULE
CM - 1/4" (6)
E
Frame / Border Type A – Concealed Angle Frame Frame / Border Type C – Core Only
G88
EGGCRATE RETURN AND EXHAUST GRILLES
STEEL FRAME
EGGCRATE GRILLES
AND REGISTERS
• EXHAUST AND RETURN
Model:
61EC
• Suffix '- O' adds a steel opposed
blade damper
Model 61EC Grilles and Registers have grid cores capable of transferring or returning high air volumes at minimum pressure
requirements. They match in appearance the grid louvers on parabolic light fixtures and are available to suit both lay-in T-Bar
FEATURES:
• Cost effective, corrosion-resistant • Grid cores are aluminum. Standard • AW Appliance White baked enamel
steel is used for the frame. core size is 1/2" x 1/2" x 1/2" (13 x 13 x finish is standard. Other finishes are
• Frame / border Type S has a 1 1/4" 13) with mechanically locked-in available.
(32) face border with a 1" (25) overlap margins. Optional core sizes are 1/2" x • Available from 4" x 4" to 48" x 48" (102
margin, furnished with countersunk 1/2" x 1" (13 x 13 x 25) and 1" x 1" x 1" x 102 to 1219 x 1219) in most models.
screw holes and mounting screws. (25 x 25 x 25).
Concealed mounting is optional. • Integral dampers – roll-formed steel
• Heavy gauge, roll-formed frames blades. Opposed blade design with a
mechanically interlocked with reinforced screwdriver slot operator.
mitered corners.
G89
EGGCRATE RETURN AND EXHAUST GRILLES
Dimensional Data
61EC Series Eggcrate Return and Exhaust
NOMINAL + 1 3/4" (44) LISTED SIZE = DUCT SIZE D
LISTED SIZE (D) - 1/4" (6)
OPTIONAL
OPPOSED
BLADE
DAMPER F
NOMINAL + 1 3/4" (44)
OPTIONAL
OPPOSED
BLADE
DAMPER F
CM - 1/4" (6)
1/4"
(6)
CM = CEILING MODULE
Narrow
Regressed 1 3/4" OR 1 5/8"
OPTIONAL T-Bar (44 OR 41)
OPPOSED Detail 5/16"
BLADE F (8)
DAMPER 9/16"
(14)
E
STANDARD FRAME WITH 1/2 x 1/2 x 1
DIM. WITH 1/2 x 1/2 x 1/2 OR 1 x 1 x 1
CM - 5/8" (16)
STD. CORE OPTIONAL CORE
CM - 1/4" (6)
E 7/8" (22) 1 1/4" (32)
F 2 5/8" (67) 3" (76)
Frame / Border Type F – Narrow Regressed T-Bar
G90
EGGCRATE RETURN AND EXHAUST GRILLES
STAINLESS STEEL
EGGCRATE GRILLES
AND REGISTERS
• EXHAUST AND RETURN
Model:
67EC
• Suffix '- O' adds a stainless steel
opposed blade damper
Model 67EC
G
The Nailor Model Series 67EC Eggcrate Return and Exhaust Grilles and Registers have grid cores that are capable of
transferring or returning high air volumes at minimum pressure requirements. The stainless steel grid core is 1/2" x 1/2" x 1/2"
FEATURES:
• Type 304 stainless steel construction. • #3 Satin polished finish is standard. • Available in sizes from 4" x 4" to 48" x
• 1 3/8" (35) wide face border with a 1" AW Appliance White baked enamel 36" (102 x 102 to 1219 x 914)
(25) overlap margin standard, furnished finish is optional. Other finishes are • Type 316 stainless steel construction
with type A countersunk screw holes available. available as an option.
and stainless steel mounting screws. • Optional dampers – roll formed
• Rigid, welded and reinforced frames stainless steel, opposed blade design
with hairline mitered corners. with a screwdriver operator.
• Grid core is 1/2" x 1/2" x 1/2" (13 x 13
x 13)
OPT.
O.B.D.
Model 67EC
G91
EGGCRATE RETURN AND EXHAUST GRILLES
Aluminum Eggcrate Return and Exhaust Grilles and Registers – Model Series 51EC
51EC - O - 24 x 12 - S - OO - AW - A - CA - —
MODEL ACCESSORIES
- Aluminum 51EC - None (default) —
- Plaster Sub-frame PF
DAMPER (OBD) - Earthquake Tabs EQT
FINISH
FRAME / BORDER TYPE
- Appliance White (default) AW
Surface Mount:
- Aluminum AL
- Standard 1 1/4" (32) (default) S - Special Custom Color SP
- Narrow 1" (25) NF - Satin (clear) Anodized *** SA
Ceiling Grid:
CEILING MODULE SIZE
- Lay-in T-Bar * L
(Use only for panel mounting,
- Angle Frame A
frame / border types PL, SP,
- Core Only C MP, FP, TP)
Panel Mount: ** Steel Aluminum - None (default) OO
- Lay-in T-Bar PLS or PLA Imperial:
- Spline SPS or SPA 12 x 12, 24 x 12, 36 x 12,
- Metal Pan MPS or MPA 48 x 12, 20 x 20, 24 x 24,
- Fineline® Type FPS or FPA 36 x 24, 48 x 24
- Tegular TPS or TPA Metric:
300 x 300, 600 x 300, 900 x 300,
1200 x 300, 500 x 500, 600 x 600,
900 x 600, 1200 x 600
Notes:
1. For a standard grille with no special requirements, specification is only required as far as the damper selection.
The "default" will automatically be selected. For example, an aluminum register, eggcrate core, surface mount with damper,
is Model 51EC–O. Unit will be supplied with a 1/2" x 1/2" x 1/2" (13 x 13 x 13) gridcore, screw holes and AW Appliance White
baked enamel finish.
2. * For Type L Lay-in, grille neck size is ceiling module size - 2" (51).
** For Panel mounting, maximum grille neck size is ceiling module size - 3" (76).
Refer to Options and Accessories Page No. G175 for dimensional data.
*** Satin anodized finish only available for Frame / Border Types S, NF and L (frame only, mill core).
SUGGESTED SPECIFICATION:
Furnish and install Nailor Model 51EC Eggcrate Return Grilles of the type and size as shown on the plans and air distribution
schedules. The grilles shall have 1/2" x 1/2" x 1/2" (13 x 13 x 13) aluminum grid core and an extruded aluminum frame that
has reinforced mitered corners. The finish shall be AW Appliance White baked enamel (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable
from the face of the grille shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.
G92
EGGCRATE RETURN AND EXHAUST GRILLES
Steel Frame Eggcrate Return and Exhaust Grilles and Registers – Model Series 61EC
61EC - O - 24 x 12 - S - OO - AW - A - CA - —
MODEL ACCESSORIES
- Steel Frame 61EC - None (default) —
- Plaster Sub-frame PF
DAMPER (OBD) - Earthquake Tabs EQT
Notes:
1. For a standard grille with no special requirements, specification is only required as far as the damper selection.
The "default" will automatically be selected. For example, a steel register, eggcrate core, surface mount with damper, is Model
61EC–O. Unit will be supplied with a 1/2" x 1/2" x 1/2" (13 x 13 x 13) gridcore, screw holes and AW Appliance White baked
enamel finish.
2. * For Type L Lay-in, grille neck size is ceiling module size - 2" (51).
** For Panel mounting, maximum grille neck size is ceiling module size - 3" (76). Refer to Options and Accessories
Page No. G175 for dimensional data.
SUGGESTED SPECIFICATION:
Furnish and install Nailor Model 61EC Eggcrate Return Grilles of the type and size as shown on the plans and air distribution
schedules. The grilles shall have 1/2" x 1/2" x 1/2" (13 x 13 x 13) aluminum grid core and a corrosion-resistant steel frame that
has reinforced mitered corners. The finish shall be AW Appliance White baked enamel (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the
grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.
G93
EGGCRATE RETURN AND EXHAUST GRILLES
Stainless Steel Eggcrate Return and Exhaust Grilles and Registers – Model Series 67EC
67EC - O - 24 x 12 - S - #3 - A - —
MODEL ACCESSORIES
- 304 Stainless Steel 67EC - None (default) —
- S/S Plaster Sub-frame PFS
OPTION
DAMPER (OBD) - 316 Stainless Steel 316
- Stainless Steel O
- No Damper — FASTENING
G - Screw Holes (default) A
- None N
WIDTH x HEIGHT
inches (mm) x inches (mm)
FINISH
GRILLES AND REGISTERS
Notes:
1. For a standard grille with no special requirements, specification is only required as far as the damper selection.
The "default" will automatically be selected. For example, a stainless steel register, eggcrate core, and stainless steel damper,
is Model 67EC-O. Unit will be supplied with screw holes and #3 satin polished finish.
SUGGESTED SPECIFICATION:
Furnish and install Nailor Model 67EC Eggcrate Return Grilles of the type and size as shown on the plans and air distribution
schedules. The grilles shall be constructed entirely from 304 stainless steel (316 optional). The grid core shall be 1/2" x 1/2" x
1/2" (13 x 13 x 13). The frames shall be constructed of heavy gauge stainless steel and have reinforced mitered corners. All
exposed surfaces shall have a #3 satin polished finish.
(Optional) A stainless steel opposed blade damper adjustable from the face of the grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.
G94
EGGCRATE RETURN AND EXHAUST GRILLES
Performance Data
Eggcrate Return and Exhaust Grilles and Registers • 5100, 6100 and 6700 Series
Models: 51EC, 61EC, 67EC
51FE, 61FE
Listed Alternate Core Ak Core Velocity 300 400 500 600 700 800 900 1000 1200 1400
Duct Size Size Area Factor VP .006 .010 .016 .022 .031 .040 .050 .062 .090 .122
(inches) (inches) (sq. ft.) Neg. SP .012 .021 .033 .048 .065 .085 .107 .132 .190 .259
8x4 CFM 60 80 100 120 140 160 180 200 240 280
6x6 0.20 0.25
10 x 4 NC - - - - 11 15 20 23 29 34
10 x 5 CFM 81 108 135 162 189 216 243 270 324 378
8x6 0.27 0.33
12 x 4 NC - - - - 12 17 21 24 30 35
12 x 5 CFM 105 140 175 210 245 280 315 350 420 490
10 x 6 0.35 0.41
16 x 4 NC - - - - 14 18 22 25 31 36
CFM 114 152 190 228 266 304 342 380 456 532
8x8 14 x 5 0.38 0.44
NC - - - - 15 18 23 26 32 37
CFM 126 168 210 252 294 336 378 420 504 588
12 x 6 18 x 4 0.42 0.50
NC - - - - 15 19 23 26 32 37
12 x 8
16 x 6
24 x 4
0.58 0.66
CFM
NC
174
-
232
-
290
-
348
11
406
17
464
20
522
24
580
27
696
33
812
38
G
14 x 7 CFM 183 244 305 366 427 488 549 610 732 854
10 x 10 0.61 0.69
26 x 4 NC - - - 11 17 20 25 28 34 39
14 x 8 30 x 4 CFM 195 260 325 390 455 520 585 650 780 910
18 x 6 0.65 0.74
28 x 4 NC - - - 11 17 21 25 28 34 39
Performance Data
Eggcrate Return and Exhaust Grilles and Registers • 5100, 6100 and 6700 Series
Models: 51EC, 61EC, 67EC
51FE, 61FE
Listed Alternate Core Ak Core Velocity 300 400 500 600 700 800 900 1000 1200 1400
Duct Size Size Area Factor VP .006 .010 .016 .022 .031 .040 .051 .062 .090 .122
(inches) (inches) (sq. ft.) Neg. SP .011 .019 .030 .043 .059 .078 .098 .120 .173 .236
36 x 30 46 x 22 CFM 2052 2736 3420 4104 4788 5472 6156 6840 8208 9576
32 x 32 6.84 7.04
38 x 28 NC - - 15 20 26 30 34 37 43 48
34 x 34 38 x 30 CFM 2307 3076 3845 4614 5383 6152 6921 7690 9228 10766
48 x 24 7.69 7.92
36 x 32 48 x 28 NC - - 16 21 26 30 35 38 44 49
38 x 34 46 x 28 CFM 2607 3476 4345 5214 6083 6952 7821 8690 10428 12166
36 x 36 8.69 8.91
42 x 30 48 x 26 NC - - 16 22 27 31 35 38 44 49
42 x 34 48 x 30 CFM 2910 3880 4850 5820 6790 7760 8730 9700 11640 13580
38 x 38 9.70 9.93
44 x 34 NC - - 16 22 27 31 36 39 45 50
42 x 36 48 x 32 CFM 3231 4308 5385 6462 7539 8616 9693 10770 12924 15078
40 x 40 10.77 11.00
46 x 34 NC - - 16 22 28 32 37 40 46 51
G 42 x 42
44 x 40 48 x 36
46 x 38
11.89 12.13
CFM
NC
3567
-
4756
10
5945
17
7134 8323 9512
23 28 32
10701
37
11890
40
14268
46
16646
51
46 x 42 CFM 3921 5228 6535 7842 9149 10456 11763 13070 15684 18298
44 x 44 13.07 13.31
NC - 10 17 23 28 33 37 40 46 51
CFM 4290 5720 7150 8580 10010 11440 12870 14300 17160 20020
46 x 46 14.30 14.55
NC - 11 18 24 29 33 37 40 46 52
GRILLES AND REGISTERS
CFM 4677 6236 7795 9354 10913 12472 14031 15590 18708 21826
48 x 48 15.59 15.84
NC - 11 18 24 29 33 37 40 46 52
PRODUCT OVERVIEW
OPTIONS AND ACCESSORIES FOR
GRILLES AND REGISTERS
Model PF
Sub-frame
FASTENING AND MOUNTING FRAMES
• Up to four methods of fastening available for most
models.
• Sub-frame available for professionally finished
openings.
• Surface mount adaptor frame for plaster and sheet
rock ceilings. Model DFA
• Panel mounting available to suit architectural ceiling Drywall/Plaster Frame
systems. Surface Mount
Ceiling Adaptor
G OPTIONS
• A selection of optional items that are available on
grilles and registers.
• Information on custom sizing for special applications.
GRILLES AND REGISTERS
FINISHES
• Selection of standard and non-standard finishes to
choose from.
• Baked enamel paint in custom colors to suit architect.
• Anodizing of aluminum products.
G172
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G173
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
Mounting Frames
SCREW
=C
MOUNTING AROUND
DU
FIELD
IMPERIAL METRIC
EIL
INSTALLED PLASTER
=C
MODULES MODULES
1 1/2" 3/8" OR
CM
G174
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
CM - 1/16" (2)
Border Type FP: Narrow Regressed T-Bar (Fineline ®) Type FP CM = CEILING MODULE
The grille or register is mounted in an extended panel that will fit a CM - 1/4" (6)
narrow regressed T-Bar ceiling grid.
5/16"
(8)
CM - 5/8" (16)
9/16" (14)
3/8"
(10)
15/16" (24)
G175
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
OPTIONS:
FINISHES:
GK Gasket
An optional foam gasket is available factory installed on the BAKED ENAMEL PAINT
rear of all Type S corrosion-resistant steel and aluminum AW Appliance White (standard)
surface mount grilles and registers. A white finish that is currently the industry standard. Closely
Eliminates air leakage and the possibility of dirt streaking matches standard finishes supplied by the majority of T-Bar
and smudging from entrainment, particularly when installed ceiling system manufacturers. (No additional cost).
on unevenly finished surfaces such as stucco. AL Aluminum
IS Insect Screen Contains suspended metal particles to give the
appearance of a silver grey metallic or anodized finish. (No
1/16" (2) galvanized steel mesh, factory installed. additional cost).
EQT Earthquake Tabs WH Off-White
G Earthquake (seismic) retaining safety tabs are available; Has a creamy appearance. (Additional cost)
factory installed on grilles or registers when required by BK Black
local building code that units be independently restrained This black has a matte finish. (Additional cost)
and safety wired to supporting structure.
SP Special
CUSTOM SIZING: The Nailor range of grilles and registers are available in
GRILLES AND REGISTERS
G176
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
Type PL Operator
Type PL (Pivot Lever)
The PL Operator is a concealed pivot lever, which is
adjusted from the face of the register using a screwdriver.
This operator is for use only on fixed blade, angled
deflection, return air grilles. When specifying, the blade
orientation of the damper must be opposite of the grille.
Type GL Operator
Type GL (Lever)
The GL Operator incorporates a lever that adjusts without
the use of tools. The lever operator extends through the
grille face and is an alternative for fixed blade, angled
2" (51)
G177
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
Type EH Operator
Model OBDD Type EH (Hex.)
The EH Operator incorporates an external hex device that
Duct Mount – External Operator
penetrates the duct wall to provide control. For use with
3/16" (5) Allen key wrench (by others).
Type EN Operator
Model OBDD Type EN (Screwdriver Slot)
The EN Operator incorporates an external (nylon)
Duct Mount – External Operator
screwdriver slot device. This device is controlled externally
through the duct.
Type QD Operator *
The QD Operator includes a nylon snap-in extension that
fits an external (nylon) operator. This device also includes a
hand locking quadrant operator for control and position
indication. Type QD or Type QX (Hand Quadrant)
1 3/4"
(44)
G179
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
Volume Extractors
MODEL SERIES
L = NOMINAL LENGTH (DUCT)
EX Blades on 2" centers L - 1/4 (6)
EXD Blades on 1" centers
W - 1/4 (6)
face of a grille or diffuser. Gang-operated parallel blades
available on 2" (51) or 1" (25) centers pivot from full open to
full closed with blades overlapping for shut-off. The curved
blade design improves airflow by reducing turbulence,
thereby reducing noise and pressure drop.
Specify on order: Length x Width. (Length is first dimension.
EX = 2" (51) CENTERS
Blades are parallel to width, second dimension). EXD = 1" (25) CENTERS
2 1/2"
(64) 1 3/8
(35)
FEATURES:
G • Material: Galvanized steel. CLOSED POSITION
• Minimum size: 6" x 4" (152 x 102).
• Maximum size: 36" x 36" (914 x 914).
FULLY
Operator Types
GRILLES AND REGISTERS
ADJUSTABLE
SETTING
EX/EXD-1
Standard unit with
adjusting strap.
Optional Accessories
EX/EXD-1-R RLD
Rod operator for Locking device for
external operation. Models EX/EXD-1-R.
EX/EXD-2
Linkage with 7/16"
(11) square hole
(2 per unit). Remote
operator (eg. Young
Regulator #1) by
others.
EX/EXD-3
Screw gear operator.
Adjusts with 3/16" (4.8)
wrench (by others).
G180