Professional Documents
Culture Documents
3D Printing
3D Printing
Slicing a .stl file in Cura with suitable parameters and 3D printing using FDM
process
Reg. no.: 2200030009
Aim:
Software Requirements:
3D Printer, Ultimaker
Procedure:
First of all we have to install ultimaker tool in order to make 3D printed Object.
So after installing it we need to go to thingiverse website in chrome and there we can
search for the required 3D image in it.
After selecting an image we need to install it.
We need to create a new folder on the desktop and save the downloaded files in it.
Now open the downloaded file and press extract here, it extracts as a .stl file.
Now open the ultimaker tool we installed before and open the .stl file we saved earlier.
After opening the .stl file in ultimaker tool and our downloaded image will appear .
Now all we have to do is adjust the x,y,z axis of our image and at how much percentage
we would like to print it.
We have to save it and copy our work into a chip card and insert it into the 3D printer.
After inserting it will show us the time and heat it’s going to use it in the process.
Our 3D object is a Ghost face and it took 20 mins to achieve the final output.
Cura Parameters:
Screenshot 1: Screenshot 2:
LAB REPORT RUBRIC
EXPERIMENT REPORT
(All steps clearly stated)
OBSERVATIONS AND DATA 15
TOTAL 20