Professional Documents
Culture Documents
Rinox Exports Catalogue3.0
Rinox Exports Catalogue3.0
Architectural Modular
Stainless Steel Railing System
RINOX Engineering is one of the pioneers of the concept of modular railing system in
an introduction
Stainless Steel. It has gained respect amongst the most quality conscious buyers across
Europe and American continents.
Using German manufacturing technology, strict Quality norms and multi-locational
manufacturing (India & China) RINOX has become a leader in its field.
Premium Stainless Steel Railing System by RINOX provides complete and elegant
solution for all standard railing and architectural requirement. The railings system
devised by RINOX is completely modular and does not need any welding, grinding or
polishing at installation site.
The Railing system is based on interchangeable components, allowing for a wide range
of flexibility to design a professional and secure railing system. These components are
available to fit standard pipe sizes.
RINOX Products (standard and OEM) are installed at various locations worldwide,
including :
Airports
Shopping Malls
Office Buildings
Residential projects
Public Parks
Associated With
DUNS No.
67-655-3578
The Research and Development (R&D) center works in close association with the
marketing team, understanding the specific requirement of the customers and
churning out products that offer solutions to the customer’s needs.
AWARDED
National Award For Excellence In Exports
By Govt. Of India
Page 8 Glass Clips Page 41 Flat Post Fittings
Page 71 Tube Support With End Plug Page 99 Baluster Spider System - 30mm
Page 75 Pipe Plug with Adjustable Rod Page 102 Spiral Case System
Page 96 Balls
Page 97 Pickets
SS316 - V4A
316 Stainless steel is an austenitic chromium nickel stainless steel containing molybdenum. This Addition
increases general corrosion resistance, improves resistance to pitting from chloride ion solutions &
provides increased strength at elevated temperatures.
316 Stainless steel maintains its luster & will never discolor under normal environment exposure, including
salt water. Our stainless steel railings are perfect for any exterior use where a low maintenance designer
finish is desired.
These components are best suitable for marine environments, coastal areas & for pool side fences
because of its superior corrosion and oxidation resistance, good mechanical properties.
RINOX Coding System
RINOX railing are avialable in AISI 304 (in stock) and AISI 316 grade (made to order)
and in Satin and Mirror polish. The coding in our catalogue is for standard AISI 304
components and in Satin Finish.
The coding systems is based on the concept of segregating different items and
clubbing the like ones.
EB . 101 . 01 . 04 . S
Product Finish
.S - Satin
.M - Mirror
.N - Natural
.R - Raw
.P - Painted / Powder Coated
Material
. 04 - AISI 304 (V2A)
. 16 - AISI 316 (V4A)
. ZM - (Zamak)
. RB - (Rubber)
. AL - (Aluminium)
Example to Order
GC.201.XX.04.S - Glass Clip SS 304 Satin Finish
GC.201.XX.16.S - Glass Clip SS 316 Satin Finish
GC.201.XX.04.M - Glass Clip SS 304 Mirror Finish
GC.201.XX.16.M - Glass Clip SS 304 Mirror Finish
GC.201.XX.ZM.S - Glass Clip Zamak Satin Finish
GLASS CLIPS FOR RAILING
All Stainless Steel Glass Clips Are available in Satin (#4) and Mirror Finish (#8)
Satin Mirror
8
Part No. D (For Tube)
GC.101.XX.16.S Flat
GC.102.XX.16.S 33.7 mm
GC.103.XX.16.S 42.4 mm
GC.106.XX.16.S 38.1 mm/ 1.5 inch APPROVED
APPROVED
All Zamak Glass Clips are available in Satin (#4) Mirror (#8), Raw and in Different Colours
10
Part No. D (For Tube) ZAMAK
GC.101.XX.ZM.S Flat
GC.102.XX.ZM.S 33.7 mm
GC.103.XX.ZM.S 42.4 mm
GC.106.XX.ZM.S 38.1 mm/ 1.5 inch
TR.030.01.16.S Flat
TR.030.02.16.S 33.7 mm
TR.030.03.16.S 42.4 mm
TR.030.04.16.S 48.3 mm
TR.030.06.16.S 38.1 mm / 1.5 inch
TR.030.07.16.S 50.8 mm / 2.0 inch
Part No.
PL.001.01.16.S
12
Part No. XX (For Glass) For Model
GR.100.01.RB.N 06 mm GC.101 / GC.102 / GC.103 / GC.106
GR.100.02.RB.N 08 mm GC.101 / GC.102 / GC.103 / GC.106
GR.100.03.RB.N 10 mm GC.101 / GC.102 / GC.103 / GC.106
GR.100.05.RB.N 06.76 mm GC.101 / GC.102 / GC.103 / GC.106
GR.100.06.RB.N 08.76 mm GC.101 / GC.102 / GC.103 / GC.106
GR.100.08.RB.N 10.76 mm GC.101 / GC.102 / GC.103 / GC.106
GLASS RUBBERS
GR.300.01.RB.N 06 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
GR.300.02.RB.N 08 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
GR.300.03.RB.N 10 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
GR.300.05.RB.N 06.76 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
GR.300.06.RB.N 08.76 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
GR.300.08.RB.N 10.76 mm GC.301 / GC.302 / GC.303 / GC.306 / GC.307
13
Part No XX (For Glass) For Model
GR.410.01.RB.N 06 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.02.RB.N 08 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.03.RB.N 10 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.04.RB.N 12 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.05.RB.N 06.76 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.06.RB.N 08.76 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.08.RB.N 10.76 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
GR.410.10.RB.N 12.76 mm GC.411/GC.413/GC.414/GC.417/GC.431/GC.433/GC/434/GC.437
14
Technical Info
316(V4A) Tube connection For tubes (Ø) Glass structure/ W(mm) T(mm)
304(V2A) Glass type
Zamak
GC.101.XX.16.S Flat
GC.102.XX.16.S 33.7 mm VSG/TVG 500-1200 6/8/10/12 6.76/8.76/10.76
GC.103.XX.16.S 42.4 mm
GC.301.XX.16.S Flat
GC.302.XX.16.S 33.7 mm VSG/TVG 500-1200 6/8/10/12 6.76/8.76/10.76
GC.303.XX.16.S 42.4 mm
GC.201.XX.16.S Flat
GC.203.XX.16.S 42.4 mm VSG/TVG 500-1500
GC.204.XX.16.S 48.3 mm VSG/TVG 500-1500 6/8/10/12 6.76/8.76/10.76/12.76
GC.206.XX.16.S 50.8 mm Mono/ESG-H 500-1500
GC.207.XX.16.S
GC.401.XX.16.S Flat
GC.403.XX.16.S 42.4 mm VSG/TVG 500-1400
GC.404.XX.16.S 48.3 mm VSG/TVG 500-1400 6/8/10/12 6.76/8.76/10.76/12.76
GC.407.XX.16.S 50.8 mm Mono/ESG-H 500-1400
GC.411.XX.16.S Flat
GC.413.XX.16.S 42.4 mm VSG/TVG 500-1400
GC.414.XX.16.S 48.3 mm VSG/TVG 500-1400 6/8/10/12 6.76/8.76/10.76/12.76
GC.417.XX.16.S 50.8 mm Mono/ESG-H 500-1400
15
Possible Width Of Glass For Outdoor Use Depending On Wind Factor, Glass Type
And Glass Thickness With Security Plate
Possible Width Of Glass For Outdoor Use Depending On Wind Factor, glass Type
And Glass Thickness Without Security Pin With Security Plate
316(V4A) Tube connection For tubes (Ø) Glass structure/ W(mm) T(mm)
304(V2A) Glass type
GC.411.XX.16.S Flat
GC.413.XX.16.S 42.4 mm VSG/TVG 500-1400 6/8/10/12 6.76/8.76/10.76/12.76
GC.414.XX.16.S 48.3 mm Mono/ESG-H
GC.417.XX.16.S 50.8 mm / 2.0 inch
16
Possible Width Of Glass For Outdoor Use Depending On Wind Factor,glass
Type And Glass Thickness With Security Pin
316(V4A) Tube connection For tubes (Ø) Glass structure/ W (mm) T (mm)
304(V2A) Glass type
GC.401.XX.16.S Flat
GC.403.XX.16.S 42.4 mm VSG/TVG 500-1400 6/8/10/12 6.76/8.76/
GC.404.XX.16.S 50.8 mm / 2.0 inch Mono/ESG-H 10.76/12.76
GC.407.XX.16.S
17
Possible Width Of Glass For Outdoor Use Depending On Wind Factor,glass
Type And Glass Thickness With Security Pin
316(V4A) Tube connection For tubes (Ø) Glass structure/ W (mm) T (mm)
304(V2A) Glass type
GC.201.XX.16.S Flat
GC.203.XX.16.S 42.4 mm VSG/TVG 500-1600 6/8/10/12 6.76/8.76/10.76/12.76
GC.204.XX.16.S 48.3 mm Mono/ESG-H
GC.207.XX.16.S 50.8 mm / 2.0 inch
Possible Width Of Glass For Outdoor Use Depending On Wind Factor, Glass Type
And Glass Thickness With Security Pin, Without Security Plate
18
For Regular Use
Part No. D (For Tube)
GH.030.01.04.S Flat
GH.030.02.04.S 33.7 mm
GH.030.03.04.S 42.4 mm
GH.030.04.04.S 48.3 mm
GH.030.06.04.S 38.1 mm/ 1.5 inch
GH.030.07.04.S 50.8 mm/ 2.0 inch
GLASS HOLDERS
Installation Instructions
1 2 3 4 5
GH.025.01.04.S
19
aluminium shoe rail
20
Part No. New
PSW.001.00.PL.N
Installation Instructions
21
Part No. Design New
EC.001.01.04.S End Cladding
Installation Instructions
22
U - TUBE FITTINGS
Part No. D (For Tube) T U
UT.042.01.04.S 42.4 mm 24mm 24mm
UT.048.02.04.S 48.3 mm 27mm 30mm
23
Part No. D (For Tube) T (Thickness) H (Height)
YE.102.03.04.S 42.4mm 1.5mm 30mm
YE.103.03.04.S 48.3mm 1.5mm 35mm
24
RINOX COMPONENTS COMBINATION WITH WOODLINE SYSTEM
WOODLINE
Using The 3 Adaptors, Existing Range of Rinox Fittings Can Be Used For Wooden Railings Also
25
Part No. D (For Tube) T (Thickness)
WL.001.01.04.S 42.4 mm 2.0 mm
WL.001.02.04.S 48.3 mm 2.0 mm
How To Use ?
26
Installation instructions for Elbow with wooden handrail
1 2 3 4
Woodline system for the Insert the wooden handrail in Insert th adaptor in the Tighten the nylon adaptor
extension of Wooden Handrail the alignment tool alignment tool with screw
5 6 7 8
Remove the alignment Adaptor tighten with Insert the connector in the Insert the another wooden
WOODLINE
tool wood handrail alignment tool handrail in the another end
of the alignment tool
9 10 11 12
Tighten the connector with Apply the glue on the nylon Insert the attached nylon
wooden handrail by screw and adaptor attached with the adaptor in the connector
remove the alignment tool first wooden handrail
27
Installation instructions for T- Joint with wooden handrail
1 2 3 4
Woodline system for T Insert the connector in the Insert the wooden handrail Tighten the connector with
joints or 3 way joints alignment tool in the alignmen tool the wooden handrail by
screw
5 6 7 8
WOODLINE
View after tightening Apply the glue on the Apply the glue on the Apply glue other side of
of connector with the collar of T joint and second collar of T joint the T joint and insert the
wooden handrail insert in the post and insert in the connector collar of the T joint in the
attached wooden right side connector
28
Installation instructions for end cap with wooden handrail
1 2 3 4
Woodline system for Keep the alignment tool Insert the wooden handrail Insert the nylon adaptor
end cap and wooden handrail in in the alignment tool in the aligning tool and
line centre to centre tighten with wooden screw
5 6 7 8
Remove the alignment Apply glue on the nylon Insert the wooden handrail
WOODLINE
tool adaptor in the end cap
1 2 3 4
Woodline system for Insert the wooden handrail Insert the connector in the
Elbow attachment in the alignment tool alignment tool & tighten
the connector with screw
5 6 7 8
UE
GL
Remove the alignment Apply the glue on the Apply the glue on the
tool Elbow collar and insert the another collar of elbow &
elbow in the connector insert the handrailing post
on the another end
29
30
ZE.040.40.04.S
ZE.140.40.04.S
ZP.040.40.04.S
SQUARE FITTINGS
ZT.040.40.04.S
ZC.105.40.04.S
ZC.050.40.04.S
31
Part No. S (For Tube) T (Thickness)
ZE.140.40.04.S 40 X 40 mm 2.0 mm
32
Part No. S (For Tube)
ZW.100.02.04.N 40x40 mm
SQUARE FITTINGS
Part No. S (For Tube) T (Thickness)
ZC.050.40.04.S 40x40 mm 2mm
33
Part No. S (For Tube)
ZC.040.42.04.S 40 x 40 mm
Part No. S
ZS.014.01.04.S 14 x 14 mm
SQUARE FITTINGS
Part No. S
ZF.014.01.04.S 14 x 14 mm
34
Part No. S (For Tube) H (Hole)
ZH.040.40.04.S Flat 10 X 10 mm
ZH.040.41.04.S Flat 12 X 12 mm
ZH.040.42.04.S Flat 12.7 X 12.7 mm
Can be bend at
required angle
SQUARE FITTINGS
Part No. H (Hole)
ZP.040.41.04.S 10 x 10 mm
35
Part No.
ZH.001.01.04.S For Weld
36
RAILING POSTS
37
Part No. D (Tube) T (Thickness) Part No. D (Tube) T (Thickness) Part No. D (Tube) T (Thickness)
RP.101.01.04.S 42.4 2.0 RP.102.01.04.S 42.4 2.0 RP.301.01.04.S 42.4 2.0
RP.101.02.04.S 50.8 2.0 RP.102.02.04.S 50.8 2.0 RP.301.02.04.S 50.8 2.0
RAILING POSTS
Part No. D (Tube) T (Thickness) Part No. D (Tube) T (Thickness) Part No. D (Tube) T (Thickness)
RP.302.01.04.S 42.4 2.0 RP.303.01.04.S 42.4 2.0 RP.401.01.04.S 42.4 2.0
RP.302.02.04.S 50.8 2.0 RP.303.02.04.S 50.8 2.0 RP.401.02.04.S 50.8 2.0
38 All units in mm
Part No. D (Tube) T (Thickness) New Part No. D (Tube) T (Thickness) New Part No. D (Tube) T (Thickness) New
RP.305.01.04.S 42.4 2.0 RP.304.01.04.S 42.4 2.0 AP.306.01.04.S 42.4 2.0
RP.305.02.04.S 50.8 2.0 RP.304.02.04.S 50.8 2.0 AP.306.02.04.S 50.8 2.0
RAILING POSTS
Part No. SQ (Tube) T (Thickness) New Part No. SQ (Tube) T (Thickness) New Part No. SQ (Tube) T (Thickness) New
AP.302.01.04.S 40.0 2.0 AP.304.01.04.S 40.0 2.0 AP.303.01.04.S 40.0 2.0
All units in mm 39
Part No. D (Tube) T (Thickness) New Part No. SQ (Tube) T (Thickness) New Part No. Width T (Thickness) D (Ø) New
RP.307.01.04.S 42.4 2.0 AP.301.01.04.S 40.0 2.0 BP.101.01.04.S 50.0 8.0 FLAT
RP.307.02.04.S 50.8 2.0 BP.101.02.04.S 50.0 8.0 33.7
Flat Bar Post
Part No. Width T (Thickness) D (Ø) New Part No. Width T (Thickness) D (Ø) New Part No. Width T (Thickness) D (Ø) New
BP.101.11.04.S 50.0 8.0 FLAT BP.102.01.04.S 50.0 8.0 FLAT BP.102.11.04.S 50.0 8.0 FLAT
BP.101.12.04.S 50.0 8.0 33.7 BP.102.02.04.S 50.0 8.0 33.7 BP.102.12.04.S 50.0 8.0 33.7
BP.101.13.04.S 50.0 8.0 42.4 BP.102.03.04.S 50.0 8.0 42.4 BP.102.13.04.S 50.0 8.0 42.4
BP.101.14.04.S 50.0 8.0 48.3 BP.102.04.04.S 50.0 8.0 48.3 BP.102.14.04.S 50.0 8.0 48.3
BP.101.16.04.S 50.0 8.0 38.1 BP.102.06.04.S 50.0 8.0 38.1 BP.102.16.04.S 50.0 8.0 38.1
BP.101.17.04.S 50.0 8.0 50.8 BP.102.07.04.S 50.0 8.0 50.8 BP.102.17.04.S 50.0 8.0 50.8
40 All units in mm
Part No. Slot Size New
GHB.038.00.04.S 50mm x 8mm
41
ADJUSTABLE RECTANGULAR BALUSTER
EASY
FIX
NO NO
WELD DRILL
APPROVED
42
ADJUSTABLE RECTANGULAR BALUSTER
APPROVED
43
Part No. H (Height)
RA.005.00.04.S 940 mm
RA.005.01.04.S 1065 mm
44
Part No. Design H (Height Variable)
RA.006.00.04.S Handrail Connector 0-72mm
45
Part No. D (For Tube)
RG.001.01.04.S 33.7 mm
RG.001.02.04.S 38.1 mm / 1.5 inch
RG.001.03.04.S 42.4 mm
RG.001.04.04.S 48.3 mm
RG.001.05.04.S 50.8 mm / 2.0 inch
The Ring System allows to use the all Rinox fitting without drilling a hole in the pipe.
RING SYSTEM
46
Part No. D (Ø) New
RF.001.11.04.S 40.0 mm
RF.001.17.04.S 50.8 mm
47
Part No. D (Ø) New
TFR.001.11.04.S 40.0 mm
TFR.001.06.04.S 38.1 mm
TFR.001.07.04.S 50.8 mm
48
Part No. D (Ø) New
GP.001.12.BR.M 25.0 mm
SHELF SUPPORT
Part No. New
LP.002.01.04.S
49
Part No. Pipe Dia Glass Size
NP.001.01.04.S 33.7mm 6mm-10 mm
50
51
Part No. A(Wire)
WC.001.01.04.S 4 mm
WC.001.02.04.S 6 mm
WR.007.11.04.S 4 mm Right M6
WR.007.12.04.S 6 mm Right M8
WIRE ROPE FITTINGS
Part No. G
WR.010.01.04.S M6
WR.010.02.04.S M8
Part No. A
WR.011.01.04.S 4 mm
WR.011.02.04.S 6 mm
52
Part No. A (For Wire) G
WR.014.01.04.S 4 mm M6
WR.014.02.04.S 6 mm M8
Part No. G D1
WR.012.01.04.S M6 5.5
WR.012.02.04.S M8 6.5
53
Part No. D D
WR.103.02.04.S 4 mm 42.4 mm
WR.103.03.04.S 5 mm 42.4 mm
WR.103.04.04.S 6 mm 42.4 mm
WR.104.02.04.S 4 mm 48.3 mm
WR.104.03.04.S 5 mm 48.3 mm
WR.104.04.04.S 6 mm 48.3 mm
WR.105.02.04.S 4 mm 38.1 mm/1.5 inch
WR.105.03.04.S 5 mm 38.1 mm/1.5 inch
WR.105.04.04.S 6 mm 38.1 mm/1.5 inch
WR.106.02.04.S 4 mm 50.8 mm/2.0 inch
WR.106.03.04.S 5 mm 50.8 mm/2.0 inch
WR.106.04.04.S 6 mm 50.8 mm/2.0 inch
Part No. D D
WR.003.02.04.S 4 mm 42.4 mm
WR.003.03.04.S 5 mm 42.4 mm
WR.003.04.04.S 6 mm 42.4 mm
WR.004.02.04.S 4 mm 48.3 mm
WR.004.03.04.S 5 mm 48.3 mm
WR.004.04.04.S 6 mm 48.3 mm
WIRE ROPE FITTINGS
WR.013.01.04.S WR.014.01.04.S
WR.012.01.04.S
WR.010.01.04.S
54
Part No. D (For Tube) T (Thickness)
EP.001.01.04.S 33.7 mm 2.0 mm
EP.001.02.04.S 42.4 mm 2.0 mm
EP.001.12.04.S 42.4 mm 2.6 mm
EP.001.03.04.S 48.3 mm 2.0 mm
EP.001.13.04.S 48.3 mm 2.6 mm
EP.001.24.04.S 38.1 mm/ 1.5 inch 1.5 mm
EP.001.25.04.S 50.8 mm/ 2.0 inch 1.5 mm
EP.001.05.04.S 50.8 mm/ 2.0 inch 2.0 mm
ENDCAPS
Part No. D (For Tube) T (Thickness)
EP.003.01.04.S 33.7 mm 2.0 mm
EP.003.01.04.S 33.7 mm 2.0 mm
EP.003.02.04.S 42.4 mm 2.0 mm
EP.003.12.04.S 42.4 mm 2.6 mm
EP.003.03.04.S 48.3 mm 2.0 mm
EP.003.13.04.S 48.3 mm 2.6 mm
EP.003.24.04.S 38.1 mm/ 1.5 inch 1.5 mm
EP.003.25.04.S 50.8 mm/ 2.0 inch 1.5 mm
EP.003.05.04.S 50.8 mm/ 2.0 inch 2.0 mm
55
Part No. D (For Tube) T (Thickness)
EP.005.01.04.S 33.7 mm 2.0 mm
EP.005.02.04.S 42.4 mm 2.0 mm
EP.005.12.04.S 42.4 mm 2.6 mm
EP.005.03.04.S 48.3 mm 2.0 mm
EP.005.13.04.S 48.3 mm 2.6 mm
EP.005.24.04.S 38.1 mm/ 1.5 inch 1.5 mm
EP.005.25.04.S 50.8 mm/ 2.0 inch 1.5 mm
EP.005.05.04.S 50.8 mm/ 2.0 inch 2.0 mm
1 2 3
56
57
Part No. D (For Tube) T (Thickness) H (Height)
EB.101.01.04.S 33.7 mm 2.0 mm 40 mm
EB.102.01.04.S 42.4 mm 2.0 mm 50 mm
EB.102.02.04.S 42.4 mm 2.6 mm 50 mm
EB.103.01.04.S 48.3 mm 2.0 mm 60 mm
EB.103.02.04.S 48.3 mm 2.6 mm 60 mm
EB.104.03.04.S 38.1 mm/ 1.5 inch 1.5 mm 45 mm
EB.105.03.04.S 50.8 mm/ 2.0 inch 1.5 mm 70 mm
EB.105.01.04.S 50.8 mm/ 2.0 inch 2.0 mm 70 mm
Installation Instructions
1 2 3 4 5
Elbow Few drops of Glue to After inserting in pipe Elbow’s other end Final View - After
fix pipe with elbow with glue to insert in fitting End Cap
tube in pipe
58
Part No. D (For Tube) T (Thickness) H (Height)
EB.501.01.04.S 33.7 mm 2.0 mm 48 mm
EB.502.01.04.S 42.4 mm 2.0 mm 60 mm
EB.502.02.04.S 42.4 mm 2.6 mm 60 mm
EB.503.01.04.S 48.3 mm 2.0 mm 70 mm
EB.503.02.04.S 48.3 mm 2.6 mm 70 mm
EB.504.03.04.S 38.1 mm/ 1.5 inch 1.5 mm 52 mm
EB.505.03.04.S 50.8 mm/ 2.0 inch 1.5 mm 70 mm
EB.505.01.04.S 50.8 mm/ 2.0 inch 2.0 mm 70 mm
TUBE JOINTS
Part No. D (For Tube) T (Thickness) H (Height)
EB.701.01.04.S 33.7 mm 2.0 mm 35 mm
EB.702.01.04.S 42.4 mm 2.0 mm 52 mm
EB.702.02.04.S 42.4 mm 2.6 mm 52 mm
EB.703.01.04.S 48.3 mm 2.0 mm 55 mm
EB.703.02.04.S 48.3 mm 2.6 mm 55 mm
EB.704.03.04.S 38.1 mm/ 1.5 inch 1.5 mm 45 mm
EB.705.03.04.S 50.8 mm/ 2.0 inch 1.5 mm 58 mm
EB.705.01.04.S 50.8 mm/ 2.0 inch 2.0 mm 58 mm
59
Part No. D (For Tube) T (Thickness)
EB.901.01.04.S 33.7 mm 2.0 mm
EB.902.01.04.S 42.4 mm 2.0 mm
EB.902.02.04.S 42.4 mm 2.6 mm
EB.903.01.04.S 48.3 mm 2.0 mm
EB.903.02.04.S 48.3 mm 2.6 mm
EB.904.03.04.S 38.1 mm/ 1.5 inch 1.5 mm
EB.905.03.04.S 50.8 mm/ 2.0 inch 1.5 mm
EB.905.01.04.S 50.8 mm/ 2.0 inch 2.0 mm
Installation Instructions
1 2 3 4 5
Elbow Put glue on tube View of Tube connector Put glue on tube Final View - after
TUBE JOINTS
connector top edge then has inserted in pipe. connector top edge then both side pipe
Tube Connector
insert in and rotate once insert in and rotate once fitting
or twice clock & or twice clock &
anti-clock wise. anti-clock wise.
60
Part No. D (For Tube) T (Thickness) H (Height)
EB.141.01.04.S 33.7 mm 2.0 mm 55 mm
EB.142.01.04.S 42.4 mm 2.0 mm 70 mm
EB.143.01.04.S 48.3 mm 2.0 mm 81 mm
EB.144.01.04.S 38.1 mm 2.0 mm 55 mm
EB.145.01.04.S 50.8 mm 2.0 mm 86 mm
61
Part No. D (For Tube) H (For Rod)
HD.001.01.04.S Flat 10 mm
HD.001.02.04.S Flat 12 mm
HD.001.03.04.S Flat 14 mm
HD.001.04.04.S Flat 12.7 mm / 0.5 inch
62
Part No. D (For Tube) H (For Rod) d (Holder Dia.)
HD.016.06.04.S 38.1 mm / 1.5 inch 6 mm 14 mm
HD.026.05.04.S 38.1 mm / 1.5 inch 16 mm 25 mm
HD.027.05.04.S 50.8 mm / 2.0 inch 16 mm 25 mm
HD.026.01.04.S Flat 16 mm 25 mm
HD.026.03.04.S 42.4 mm 16 mm 25 mm
SLIMLINE
Part No. D (For Tube) H (For Rod) d (outerdia)
HD.401.01.04.S Flat 10.0 mm 16 mm
HD.401.02.04.S Flat 12.0 mm 18 mm
HD.401.03.04.S Flat 14.0 mm 20 mm
HD.402.01.04.S 33.7 mm 10.0 mm 16 mm
HD.402.02.04.S 33.7 mm 12.0 mm 18 mm
HD.402.03.04.S 33.7 mm 14.0 mm 20 mm
HD.403.01.04.S 42.4 mm 10.0 mm 16 mm
HD.403.02.04.S 42.4 mm 12.0 mm 18 mm
HD.403.03.04.S 42.4 mm 14.0 mm 20 mm
HD.404.01.04.S 48.3 mm 10.0 mm 16 mm
HD.404.02.04.S 48.3 mm 12.0 mm 18 mm
HD.401.01.04.S (Slimline)
1 2 3 4 5
Stab Clip / Cross Bar Unscrew the screw Disassemble the both Parts after disassembly Insert the rod in the one
Holder parts part of the cross bar
holder
63
Installation slides text for stab clip
6 7 8 9 10
Insert the second rod in Assemble both the parts Tighten the screw Adjust the angle for the Final view after
the second part of cross of Stab Clip rods as per requirement installation
bar holder
HD.202.01.04.S 33.7 mm
HD.203.01.04.S 42.4 mm
HD.204.01.04.S 48.3 mm
HD.206.01.04.S 38.1 mm / 1.5 inch
HD.207.01.04.S 50.8 mm / 2.0 inch
64
Part No. D
UC.001.02.04.S 33.7 mm
UC.001.03.04.S 42.4 mm
UC.001.04.04.S 48.3 mm
UC.001.06.04.S 38.1 mm/ 1.5 inch
UC.001.07.04.S 50.8 mm/ 2.0 inch
Installation Instructions
1 2 3 4 5
UPRIGHT CLAMPS
Upright Clamp Insert Pipe in Upright View after Pipe Tighten to Grub screw Final View Pipe fitting
Clamp center hole inserted in Upright in Upright Clamp thread in Upright Clamp
Clamp center hole hole with L-key
65
Part No. D (For Rod)
UC.002.12.04.S 33.7mm
UC.002.13.04.S 42.4 mm
UC.002.14.04.S 48.3 mm
UC.002.16.04.S 38.1 mm / 1.5 inch
UC.002.17.04.S 50.8 mm / 2.0 inch
Installation Instructions
UPRIGHT CLAMPS
1 2 3 4 5
Upright Clamp 1. Open allen head Insert Pipe in Pipe inserting in Tight to allen
Front View screw Clamp second Clamp head screw with
L-key
2. Open allen head
second screw
6 7
66
Part No. D (For Tube)
UC.005.02.04.S 33.7 mm
UC.005.03.04.S 42.4 mm
UC.005.04.04.S 48.3 mm
UC.005.06.04.S 38.1 mm/ 1.5 inch
UC.005.07.04.S 50.8 mm/ 2.0 inch
Installation Instructions
1 2 3 4 5
UPRIGHT CLAMPS
Upright Clamp Upright Clamp - Full Insert SCK screw in Insert second SCK Put tube on screw
Assembly base plate screw in second hole
of base plate
6 7 8 9 10
11 12 13 14
View after setting Tight to screw in HRA Final View Installed View
HRA on screw with L-key both side.
67
Part No. D (For Tube) T (Thickness)
UC.004.02.04.S 33.7 mm 2.0 mm
UC.004.03.04.S 42.4 mm 2.0 mm
UC.004.23.04.S 42.4 mm 2.6 mm
UC.004.04.04.S 48.3 mm 2.0 mm
UC.004.24.04.S 48.3 mm 2.6 mm
UC.004.06.04.S 38.1 mm/ 1.5 inch 2.0 mm
UC.004.16.04.S 38.1 mm/ 1.5 inch 1.5 mm
UC.004.17.04.S 50.8 mm/ 2.0 inch 1.5 mm
UC.004.07.04.S 50.8 mm/ 2.0 inch 2.0 mm
For cover please refer RINOX catalog page no. 87
68
Part No. D (Dia.) T (Thickness)
UC.008.02.04.S 33.7 mm 2.0 mm
UC.008.03.04.S 42.4 mm 2.0 mm
UC.008.23.04.S 42.4 mm 2.6 mm
UC.008.04.04.S 48.3 mm 2.0 mm
UC.008.24.04.S 48.3 mm 2.6 mm
UC.008.16.04.S 38.1 mm / 1.5 inch 1.5 mm
UC.008.17.04.S 50.8 mm / 2.0 inch 1.5 mm
UC.008.07.04.S 50.8 mm / 2.0 inch 2.0 mm
69
WR.012.01.04.S
PW.062.XX.04.S
UC.108.10.RB.N
CORE MOUNT FOR BALUSTER
UC.108.10.RB.N
PW.062.10.04.S
DIN.7991.M12.60.04
Installation Instructions
Welded
70
Part No. D (For Tube) T (Thickness) New
TFR.003.03.04.S 42.4 mm 2.0 mm
Installation Instructions
71
Part No. D (For Tube) T (Thickness) d (For Tube)
TF.002.01.04.S 33.7 mm 2.0 mm Flat
TF.003.01.04.S 42.4 mm 2.0 mm Flat
TF.013.01.04.S 42.4 mm 2.6 mm Flat
TF.004.01.04.S 48.3 mm 2.0 mm Flat
TF.014.01.04.S 48.3 mm 2.6 mm Flat
TF.105.01.04.S 38.1 mm/ 1.5 inch 1.5 mm Flat
TF.106.01.04.S 50.8 mm/ 2.0 inch 1.5 mm Flat
TF.006.01.04.S 50.8 mm/ 2.0 inch 2.0 mm Flat
TF.107.07.04.S 50.8 mm/ 2.0 inch 1.5 mm 50.8 mm/ 2.0 inch
TF.007.06.04.S 50.8 mm/ 2.0 inch 2.0 mm 38.1 mm/ 1.5 inch
TF.007.07.04.S 50.8 mm/ 2.0 inch 2.0 mm 50.8 mm/ 2.0 inch
72
Part No. D (For Tube) T (Thickness) d (For Tube)
TS.002.01.04.S 33.7 mm 2..0 mm Flat
TS.003.01.04.S 42.4 mm 2..0 mm Flat
TS.013.01.04.S 42.4 mm 2.6 mm Flat
TS.004.01.04.S 48.3 mm 2..0 mm Flat
TS.014.01.04.S 48.3 mm 2.6 mm Flat
TS.106.01.04.S 38.1 mm/ 1.5 inch 1.5 mm Flat
TS.107.01.04.S 50.8 mm/ 2.0 inch 1.5 mm Flat
TS.007.01.04.S 50.8 mm/ 2.0 inch 2..0 mm Flat
Installation Instructions
1 2 3 4 5
Flexible tube- Aligning HRA holes Insert button head Insert button head Allowing Glue to fix
support with 42.4 with tube holes screw in HRA hole screw in HRA hole
mm HRA and for and Tighten to screw and Tighten to screw
42.4 mm pipe fitting with El-key in Pipe with El-key in Pipe
6 7
73
Part No. D (For Tube) T (Thickness) d (For Tube)
TF.203.02.04.S 42.4 mm 2.0 mm 33.7 mm
TF.203.03.04.S 42.4 mm 2.0 mm 42.4 mm
TF.203.23.04.S 42.4 mm 2.6 mm 42.4 mm
TF.205.15.04.S 38.1 mm/ 1.5 inch 1.5 mm 38.1 mm/ 1.5 inch
TF.205.16.04.S 38.1 mm/ 1.5 inch 1.5 mm 50.8 mm/ 2.0 inch
TF.206.15.04.S 50.8 mm/ 2.0 inch 1.5 mm 38.1 mm/ 1.5 inch
TF.206.16.04.S 50.8 mm/ 2.0 inch 1.5 mm 50.8 mm/ 2.0 inch
TF.206.05.04.S 50.8 mm/ 2.0 inch 2.0 mm 38.1 mm/ 1.5 inch
TF.206.06.04.S 50.8 mm/ 2.0 inch 2.0 mm 50.8 mm/ 2.0 inch
TS.206.06.04.S 50.8 mm/ 2.0 inch 2.0 mm 50.8 mm/ 2.0 inch
Example
74
Part No. D (For Tube) T (Plate Dia.)
TF.207.02.04.S 42.4 mm 2 mm
75
Part No. D (For Tube) T (Thickness) For Tube
TR.002.01.04.S 33.7 mm 2.0 mm Flat
TR.003.01.04.S 42.4 mm 2.0 mm Flat
TR.013.01.04.S 42.4 mm 2.6 mm Flat
TR.004.01.04.S 48.3 mm 2.0 mm Flat
TR.014.01.04.S 48.3 mm 2.6 mm Flat
TR.026.01.04.S 38.1 mm/ 1.5 inch 1.5 mm Flat
TR.027.01.04.S 50.8 mm/ 2.0 inch 1.5 mm Flat
TR.007.01.04.S 50.8 mm/ 2.0 inch 2.0 mm Flat
Installation Instructions
1 2 3 4 5
Flexible tube-support Aligning HRA holes with View after Put Tube Insert SCK screw in Tube View after tighten
with 42.4 mm HRA and tube holes Rest on thread hole Rest then tight to screw screw in Pipe. Tube
for 42.4 mm pipe fitting pipe. in pipe thread hole with Rest fix in Pipe.
L-key.
6 7
76
Part No. D (For Tube) d (For Tube)
HF.001.01.04.S Flat Flat
HF.001.02.04.S 33.7 mm Flat
HF.001.03.04.S 42.4 mm Flat
HF.001.04.04.S 48.3 mm Flat
HF.001.06.04.S 38.1 mm/ 1.5 inch Flat
HF.001.07.04.S 50.8 mm/ 2.0 inch Flat
HANDRAIL BRACKETS
Part No. D (For Tube) d (For Tube)
HF.003.03.04.S 42.4 mm 42.4 mm
HF.004.03.04.S 42.4 mm 48.3 mm
HF.003.04.04.S 48.3 mm 42.4 mm
HF.004.04.04.S 48.3 mm 48.3 mm
HF.006.06.04.S 38.1 mm/ 1.5 inch 38.1 mm/ 1.5 inch
HF.007.06.04.S 38.1 mm/ 1.5 inch 50.8 mm/ 2.0 inch
HF.006.07.04.S 50.8 mm/ 2.0 inch 38.1 mm/ 1.5 inch
HF.007.07.04.S 50.8 mm/ 2.0 inch 50.8 mm/ 2.0 inch
77
Part No. D (For Tube) d (For Tube)
HS.003.03.04.S 42.4 mm 42.4 mm
HS.004.03.04.S 42.4 mm 48.3 mm
HS.003.04.04.S 48.3 mm 42.4 mm
HS.004.04.04.S 48.3 mm 48.3 mm
HS.006.06.04.S 38.1 mm/ 1.5 inch 38.1 mm/ 1.5 inch
HS.007.06.04.S 38.1 mm/ 1.5 inch 50.8 mm/ 2.0 inch
HS.006.07.04.S 50.8 mm/ 2.0 inch 38.1 mm/ 1.5 inch
HS.007.07.04.S 50.8 mm/ 2.0 inch 50.8 mm/ 2.0 inch
78
Installation Instructions
1 2 3 4 5
Un Assembled View Handrail Bracket Handrail Bracket Put out rod from hole Insert SCK screw in
cap center hole
HANDRAIL BRACKETS
6 7 8 9 10
Tight screw in pipe Cap view after tight Put tube on Cap Tight grub screw for lock HRA put on Thread hole
with L-key screw in pipe after adjust to rod. of pipe
11 12 13 14 15
Insert screw in HRA hole Insert second screw in Insert Rod in hole After inserting screw with Actual View
then tight button head HRA second hole then tight L-key
screw in pipe with L-key. button head screw in pipe
with L-key.
79
Part No. D (For Tube) D (Plate Dia.) R (Rod Dia.)
WB.010.01.04.S Flat 58 mm 12 mm
WB.010.02.04.S 33.7 mm 58 mm 12 mm
WB.010.03.04.S 42.4 mm 58 mm 12 mm
WB.010.04.04.S 48.3 mm 58 mm 12 mm
WB.010.07.04.S 50.8 mm/ 2.0 inch 58 mm 12 mm
WB.010.06.04.S 38.1 mm/ 1.5 inch 58 mm 12 mm
Installation Instructions
1 2 3 4 5
Complete Assembly Bend Rod with Insert screw in round Tighten to screw in Bend Insert SCK screw in
accessary round plate plate bottom side Rod thread hole with second accessory HRA
and SCK screw L- Key center hole and tighten
to screw in Bend Rod
second side thread hole
with L-key
6 7 8
80
Part No. D (For Tube) D (Plate Dia.) R (Rod Dia.)
WB.110.11.04.S Flat 58 mm 12 mm
WB.110.12.04.S 33.7 mm 58 mm 12 mm
WB.110.13.04.S 42.4 mm 58 mm 12 mm
WB.110.14.04.S 48.3 mm 68 mm 14 mm
WB.110.16.04.S 38.1 mm/ 1.5 inch 58 mm 12 mm
WB.110.17.04.S 50.8 mm/ 2.0 inch 68 mm 14 mm
WALL BRACKETS
81
Part No. D (For Tube) D (Plate Dia.) R (Rod Dia.)
WB.120.01.04.S Flat 58 mm 12 mm
WB.120.02.04.S 33.7 mm 58 mm 12 mm
WB.120.03.04.S 42.4 mm 58 mm 12 mm
WB.120.04.04.S 48.3 mm 68 mm 14 mm
WB.120.07.04.S 50.8 mm/ 2.0 inch 68 mm 14 mm
WB.120.06.04.S 38.1 mm/ 1.5 inch 58 mm 12 mm
WALL BRACKETS
82
Part No. D (Plate Dia.) T (Thickness)
PL.033.04.04.S 33 mm 04 mm
PL.042.04.04.S 42 mm 04 mm
PL.048.04.04.S 48 mm 04 mm
PL.056.04.04.S 56 mm 04 mm
PL.058.01.04.S 58 mm 05 mm
PL.070.01.04.S 68 mm 05 mm
PL.080.06.04.S 80 mm 06 mm
PL.100.01.04.S 100 mm 06 mm
PL.100.10.04.S 100 mm 10 mm
PL.120.10.04.S 120 mm 10 mm
83
Part No. D (Plate Dia.) T (Thickness) R (Centre Hole)
CP.058.05.04.S 58 mm 05 mm 10.0 mm
CP.068.05.04.S 68 mm 05 mm 10.0 mm
Installation Instructions
84
Part No. D (Plate Dia.) H (Thickness) R (Centre Hole)
PC.060.01.04.S 60 mm 12.0 mm 12 mm
PC.076.02.04.S 76 mm 12.0 mm 12 mm
PC.076.01.04.S 76 mm 14.0 mm 12 mm
PLATE COVER
Installation Instructions
1 2 3 4
85
86
Part No.
SD.001.01.04.S
Part No.
SD.001.02.04.S
Part No.
SD.001.04.04.S Right Side
SD.001.14.04.S Left Side
Part No.
SD.001.05.04.S
Part No.
SD.001.06.04.S
87
Part No. New
SD.002.01.04.S
SLIDING DOOR
88
Part No. New Plastic
SD.101.01.04.S Ø27mm
Ø40mm
SD.102.01.04.S
Plastic
SD.103.01.BR.M
Ø60mm
Metal
Ø27mm
Part No. New
SD.104.01.BR.M
Ø60mm
89
Part No. Length New
ST.101.01.AL.A 2Mtr
ST.101.02.AL.A 4Mtr
Installation Instructions
ceiling
Track
Track
Wheel
Adjustment Screw
Glass
Clamp Joint
Glass Clamp
Spacer Cushion
Glass
Floor Guide
90
Part No. T (Glass Thickness)
CN.001.01.16.S 12-20 mm
CANOPY SYSTEMS
(For Heavy Duty Applications)
Part No. D (For Tube) T (Thickness)
CN.003.01.16.S M12 12-20mm
91
Part No. D (For Tube) L (Length)
CN.004.01.16.S 12mm 940mm
CN.004.02.16.S 12mm 1500mm
CN002.01.16.S
CN004.01.16.S
CN004.02.16.S
CN003.01.16.S
CN001.01.16.S
92
Part No. T (Glass Thickness)
CN.001.11.16.S 8-12 mm
CANOPY SYSTEMS
(For Regular Applications)
Part No. T (Glass Thickness)
CN.003.11.16.S 8-12 mm
93
Part No. T (Thikness) New
CN.001.03.16.S 8-12 mm
94
Technical Info For Heavy Duty Applications
CANOPY SYSTEMS
FIXED AT 4 POINTS
Length ( L) Width ( W) Glass Thickness ( T ) Load Bearing Capacity
1400 mm 720 mm VSG = 2 X 8 mm TVG 1.05 kN / m²
1400 mm 720 mm VSG = 2 X 8 mm TVG 0.80 kN / m²
1500 mm 720 mm VSG = 2 X 10 mm TVG 1.05 kN / m²
1800 mm 720 mm VSG = 2 X 10 mm TVG 1.05 kN / m²
1900 mm 720 mm VSG = 2 X 10 mm TVG 0.80 kN / m²
95
Part No. D (Ball Dia.) H (Thread / For Rod)
BS.015.02.04.S 15 mm M6
BS.020.02.04.S 20 mm M6
BS.020.04.04.S 20 mm 10.0 mm
BS.020.05.04.S 20 mm 12.0 mm
BS.025.02.04.S 25 mm M6
BS.025.05.04.S 25 mm 12.0 mm
BS.025.06.04.S 25 mm 14.0 mm
BS.030.02.04.S 30 mm M6
BS.030.05.04.S 30 mm 12.0 mm
BS.030.06.04.S 30 mm 14.0 mm
BS.020.07.04.S 20 mm 12.7 mm/ 0.5 inch
BH.055.12.04.S 55 mm 42.4 mm
BH.060.13.04.S 60 mm 48.3 mm
BH.050.15.04.S 50 mm 38.1 mm/ 1.5 inch
BH.060.16.04.S 60 mm 50.8 mm/ 2.0 inch
Installation Instructions
1 2 3
96
Part No. D L Part No. D L Part No. D L
BL.002.01.04.S 12 mm 950 mm BL.004.01.04.S 12 mm 950 mm BL.005.01.04.S 12 mm 950 mm
BL.002.11.04.S 12 mm 1000 mm BL.004.11.04.S 12 mm 1000 mm BL.005.11.04.S 12 mm 1000 mm
PICKETS
Part No. D L Part No. D L Part No. D L
BL.006.01.04.S 12 mm 950 mm BL.008.01.04.S 12 mm 950 mm BL.009.01.04.S 12 mm 950 mm
BL.006.11.04.S 12 mm 1000 mm BL.008.11.04.S 12 mm 1000 mm BL.009.11.04.S 12 mm 1000 mm
97
Part No. D (For Tube) T (Thickness)
GB.002.02.04.S 42.4 mm 8-20 mm
GB.002.03.04.S 48.3 mm 8-20 mm
GB.002.04.04.S 38.1 mm/1.5 inch 8-20 mm
GB.002.05.04.S 50.8 mm/ 2.0 inch 8-20 mm
98
Part No. D (For Tube) T (Thickness)
GB.003.02.04.S 42.4 mm 6-16 mm
GB.003.03.04.S 48.3 mm 6-16 mm
GB.003.04.04.S 38.1 mm/1.5 inch 6-16 mm
GB.003.05.04.S 50.8 mm/ 2.0 inch 6-16 mm
99
Part No. L (Length) T (Thickness)
GB.004.01.04.S 75 mm 8-12 mm
GB.004.02.04.S 103 mm 8-12 mm
100
CORNER CONNECTION - SURFACE TO GLASS
SHOWER FITTINGS
115° 55 60 73 —
120° 52 52 69 —
125° 49 54 66 —
130° 47 51 63 —
135° 44 48 60 —
180° — — — 50
Installation Instructions
101
SR.002.XX.04.S
SPIRAL CASE SYSTEMS
Vertical Post
SR.004.XX.04.S
SR.001.XX.04.S
SR.003.XX.04.S
102
Part No. D (Dia.) H (Height Variable)
SR.001.01.04.S 139 mm 110-170 mm
103
Part No. D (Dia.) H (Height Variable) d (For Tube) T (Thickness)
SR.004.01.04.S 42 mm 110-170 mm 42.4 mm 2.0 mm
SR.004.02.04.S 42 mm 110-170 mm 42.4 mm 2.6 mm
SR.004.03.04.S 42 mm 110-170 mm 48.3 mm 2.0 mm
SR.004.04.04.S 42 mm 110-170 mm 48.3 mm 2.6 mm
SPIRAL CASE SYSTEMS
104
Part No. D (For Tube)
UA.001.01.04.S Flat
UA.001.02.04.S 33.7 mm
UA.001.03.04.S 42.4 mm
UA.001.04.04.S 48.3 mm
UA.001.06.04.S 38.1 mm/ 1.5 inch
UA.001.07.04.S 50.8 mm/ 2.0 inch
TUBE SADDLES
Part No. D (For Tube)
UA.001.13.04.S 42.4 mm
UA.001.14.04.S 48.3 mm
UA.001.16.04.S 38.1 mm/ 1.5 inch
UA.001.17.04.S 50.8 mm/ 2.0 inch
105
Part No. D (Bar Dia.) Pin Thread Hole Thread
Hole Thread
SP.001.21.04.S 12 mm M8 M6
SP.002.21.04.S 14 mm M8 M6
106
Part No. D (Bar Dia.) Pin Thread Hole Thread
FP.001.21.04.S 12 mm M8 M6
FP.002.21.04.S 14 mm M8 M6
RODS
Part No. D (Bar Dia.) Hole Thread
FP.012.20.04.S 14 mm M6
UA.001.XX.XX.S
SP.001.21.04.S SP.002.21.04.S
FP.001.21.04.S FP.002.21.04.S
EP.006.XX.XX.S
107
Zamak Products Resembles to Stainless Steel Finish
What is Zamak ?
Zamak is a family of alloys with a base metal of zinc and alloying elements of aluminium, magnesium,& copper. The addition of Copper
& Magnesium provides it diverse properties and allows it to cast. Zamak alloys exhibiting an excellent combination of cost, strength,
ZAMAK
Why Zamak ?
Finish - same as Stainless Steel.
Cost - almost 50 % cheaper than Stainless Steel.
Colors - can be powder coated in any colour.
Oxidation - good corrosion resistance properties.
Zamak Fittings with satin finsh ( Stainless look) recommended for Indoor only, but Zamak
Fittings with powder coating can be used for outdoor also.
108
Part No. D (For Tube) H (For Rod)
HD.003.01.ZM.S 42.4 mm 10 mm
HD.003.02.ZM.S 42.4 mm 12 mm
ZAMAK Fitting
EB.302.01.ZM.S 42.4 mm 2 mm 50 mm
109
Part No. H W Part No. H W
RX.001.01.04.S 900 mm 1120 mm RX.003.01.04.S 815 mm 1155 mm
RX.001.02.04.S 510 mm 550 mm RX.003.02.04.S 370 mm 730 mm
DISPLAYS
Part No. H W
RX.006.01.04.S 1050 mm 1150 mm
110
Part No. D T L
DIN914.M8.35.04 Allen Drive Grub C Point M8 35 mm
DIN914.M5.05.04 Allen Drive Grub C Point M5 05 mm
DIN914.M6.06.04 Allen Drive Grub C Point M6 06 mm
SCREWS
DIN7380.M6.12.04 Button Head M6 12 mm
DIN7380.M6.50.04 Button Head M6 50 mm
DIN7380.M5.12.04 Button Head M5 12 mm
DIN7380.M5.10.04 Button Head M5 10 mm
DIN7380.M6.18.04 Button Head M6 18 mm
DIN7991.M8.16.04 CSK Allen Head M8 16 mm
DIN7991.M6.12.04 CSK Allen Head M6 12 mm
DIN7991.M8.60.04 CSK Allen Head M8 60 mm
DIN7991.M8.20.04 CSK Allen Head M8 20 mm
111
Quick drying, high temperature resistant, retainer & sealant. Its suitable for stainless steel, non remov-
able whether exposed to a high temperature and pressure.
112
A B C D
Codes Page No. Codes Page No. Codes Page No. Codes Page No.
AP 39,40 BH 96 CN 91, 92, 93, 94 DH 89
BL 97 CP 84 DIN 69, 111
BP 40
BS 96
E F G H
Codes Page No. Codes Page No. Codes Page No. Codes Page No.
EB 58, 59, 60 FB 106 GB 98, 99, 100 HD 41, 62, 63
61, 71, 109 FP 107 GC 9, 10, 11, 12, 64, 109
EC 22 15, 16, 17, 18 HF 77
EP 55, 56, 109 GF 78 HS 77, 78
ETP 20 GH 19
ETR 21 GHB 41
GP 49
GR 13, 14
GS 78
L M N P
Codes Page No. Codes Page No. Codes Page No. Codes Page No.
LP 49 MP 112 NP 50 PC 85
PL 12, 83
PSG 21
PSW 21
PW 69, 83, 84
R S T U
Codes Page No. Codes Page No. Codes Page No. Codes Page No.
RA 41, 44, 45 SB 106 TF 72, 74, 75 UA 105
CODES
RC 22 SC 63 TFR 48, 71 UB 41
RF 41, 47 SD 87, 88, 89 TR 12, 76 UC 65, 66, 67
RG 46 SP 106 TRS 32 68, 69
RP 38 SR 103, 104 TS 41, 73, 74, 75 UT 23
RX 110 ST 90
W Y Z
Codes Page No. Codes Page No. Codes Page No.
WB 80, 81, 82 YC 23 ZC 33, 34, 41
WC 52 YE 24 ZE 32
WF 78 YP 24 ZF 34
WH 53 YR 24 ZH 35, 36
WL 26 ZP 32, 35
WR 52, 53, 54 ZR 35
WS 78 ZS 34
ZT 34
ZW 33
ZX 35
113
114
Trade Shows
RINOX is a regular Exhibitor at various National & International Exhibitions.
115
engineering
RINOX Engineering
Industrial Area - C, Giaspura Road, P.O. Jaspal Bangar, Ludhiana, India-141010
+91-161-251 0525 / 26 info@rinox.in
Fax: +91-161-251 0625, 230 1884 E-Fax: +1- 206- 495-0858
Ver 3.0