F one N CO.,LTD. Technical Data
"otc 22-41, tay, Oka, 567-643 pan Seal
TeH8L72650-2m0 —PRKOI-72.6-40N6 aT
‘on-Exposure Type, Buffer Waterproofing
AX-2(A) / AX-2(B)
1. General
This monolithic quid applied and two components elastomeric, waterproofing membranes is
esigned to use buffer waterproof for AXSP.
‘This system has good bond strength between SP-1 and concrete slabs.
Item Contents
Products Designatior “component, Buffer waterproof material
+ 2component
A) Resin: Polyurethane Prepolymer
)Hardener : Polypropylene Glycol
Generic &
Specific Composition
Fish Gloss a
Color + Black
surface + Cured cement mortar or concrete, steel, etc.
cure + Chemical reaction
tem ‘Contents
OE
Appication Method, tt Sst Can be epaled by role, nathed trowel o
Mixing Ratio (by weight) + AX-2(A) / AX-2(6) = 1/4
‘Theoretical Coverage = O.8~1.4 ka/nt at 0.4~0.7mm
Recommended -
Application Temperature _* Ambient: 10 ~ 40%
Effect of exposure ~ Although color change a le, physical
to-night pmnperties do not change in short term,
Storege Characteristic + Shel life 12 months at ambient temperature
Packing Unit
ire 2 4 the MSDS de cil nome slo rest to your con)
{emer utr Tne nt and eis nosey your emcee to gas econ east oat
‘roma ae S0 fas ea ay hens seme ve sie ys oy cao oe ag
thr stare ee edo gt it sna tay td sos ace he
1aPRODUCT NAME AXA) AB) ~ Reve: 1
2. Physical properties
‘A, General Properties
Rem
RA He
Appearance Light yellowish liquid Black liquid
Specific Gravity at 25% ee
pee 4.00 - 1.10 Las 155
Viscosity at 25° 1
STH 2196) (mas 500 1,500 8,000 22,000
BeDrying Time
Curing Temp Pot life Dry to Touch Over Coating Time
cc) rs) rs) (hrs)
5 4-5 26-30 32-36 over
10 a5 22-24 28-30 over
15 3-4 10-14 18-22 over
20 3-4 8-10 12 16 over
25 2-3 oe 10 12 over
Wet and Dry Film Thickness + Recommended: 0.8m to 1.5
13. Precautions
+ Do not apply materials when the temperature is less than 5YC
‘+ Avoid breathe of vapors and contact of materials with skin or eyes
+ Keep products away from heat, sparks and flames
+ Do not use spark proccing eqtipment during application
4. Application
1) Substrate preparation
* All surfaces to be coated must be thoroughly dry and free from contamination including
oll and dirt.
+All cracks over 1/16" in width shall be routed out to 1/4* in width and in depth and fil
with polyurethane elastomeric sealants,
2) Base membrane
‘+ Mix two components, &X-2(A) and AX-2(B) with fixed ratio in around bottom tub,
+ The mixed viscosity i stable for roller coating or brushing further dilution fs desired,
‘add solvent (Toluene) zbout 5% of mixed resin
+ This system can be aprtied by aller, notched trowel or brush,
+ After completion of sucessful water test and/or repairs, cover membrane with conerete
"mortar or protection board as soon as possible as indicated on the project drawing,
All waterproofing membrane must be protected within five days after application,
28
TXPRODUCT NAME | AX-2(A) / AX-2(8) I
Reh:
1
5. MECHANICAL PROPERTIES
‘A. Harcness at 25% (ASTM 02240) + 50410 (Shore A)
8, Tensle strength at 23% (JIS A6021) +43 Nit
. Tear Strength at 23 1S A6021) ALN
. Elongation at 23% (us A621) +430 %
Adhesion for concrete (IS 6809) +23 Nad