F one N CO.,LTD. ‘Technical Data
and oe 221 Hot ar ly Cea, 57 89, pan aed TTR
‘Top Coat of Gloss
TP-1(A) / TP-1(B)
1. Characteristics
(2) Excellent durability as top coating of aloss coloring type.
(2) Satisfy the demand of customer with variable coors of two components.
(G) Satisfy beautiful floor layer with excellent adhesion to based P/U layer paved,
(4) No dscolorabe quality a5 acrylic macified P/V.
(6) Excellent elasticity in rarticular as component types.
2, Physical properties
Item TP-1(A) TP-1(8)
Appearance Cleared Liquid Colored Liquid
i) 3042 5643
Mixing Ratio (wt) 1 8
Gioss (60°, 9) ‘Above 70
Temperature
hem st 20 a0
Tacky Free Time 2 Hours 30 Minutes 20 Minutes
s_in sste NSDS decry gy
tet poet gat Thr shel od waa peta four load del gee
‘Sno Sess Soper ay ne ie mer er yur specs Da Se
fm ar pemancsb ee Wc tr emma a wey pets mae
12PRODUCT NAME P-I(A)/ TP-1(8) exo: 1
3. Used And Using Methods
+ Mix two components, TP-1(A) and TP-1(8) with fixed ratio in a round battom tub.
+ 0.200.3kg is need per square meters with spray and roller.
+ Allow the coating to cure for minimum of 24hrs before applying the next coat.
‘+ Use designated solvent ‘Toluene, Xylene), considering working condition.
(20-30% To Resin)
4. Attention
+ Remove all sources of cnition because of including solvent.
+ Store ina well-ventilated place. Keep container tightly closed.
‘If on skin or air, take of al contaminated clothing. Rinse skin with soap and water
5. Package
TP-A(A) 3L_— Square Can (2 Ka)
TP-1(B) 18 Round Can (16 Kg)
212