Professional Documents
Culture Documents
AUO G240HW01 بانال مشروح
AUO G240HW01 بانال مشروح
AUO G240HW01 بانال مشروح
AU OPTRONICS CORPORATION
Checked &
Prepared by
Approved by
Contents
1. Operating Precautions..................................................................................... 4
2. General Description......................................................................................... 5
2.1 Display Characteristics .......................................................................................................... 5
2.2 Optical Characteristics ........................................................................................................... 6
3. Functional Block Diagram ............................................................................... 9
4. Absolute Maximum Ratings .......................................................................... 10
4.1 TFT LCD Module..................................................................................................................10
4.2 Backlight Unit .......................................................................................................................10
4.3 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics .............................................................................. 11
5.1 TFT LCD Module.................................................................................................................. 11
5.2 Backlight Unit .......................................................................................................................13
6. Signal Characteristic ..................................................................................... 14
6.1 Pixel Format Image ..............................................................................................................14
6.2 Signal Description ................................................................................................................15
6.3 The Input Data Format .........................................................................................................16
6.4 Interface Timing....................................................................................................................17
6.5 Power ON/OFF Sequence...................................................................................................18
7. Connector & Pin Assignment........................................................................ 19
7.1 TFT LCD Module: LVDS Connector ....................................................................................19
7.2 Backlight Unit: LED Connector ............................................................................................20
8. Reliability Test ............................................................................................... 21
9. Mechanical Characteristics ........................................................................... 22
10. Label and Packaging ................................................................................... 24
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................24
10.2 Carton Package .................................................................................................................24
11. Safety............................................................................................................ 25
11.1 Sharp Edge Requirements ................................................................................................25
11.2 Materials .............................................................................................................................25
11.3 Capacitors ..........................................................................................................................25
11.4 National Test Lab Requirement .........................................................................................25
2. General Description
This specification applies to the 24 inch-wide Color TFT-LCD Module G240HW01 V0. The display supports the Full
HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits data). All input signals are dual channel
LVDS interface.
LED driver board is included. G240HW01 V0 is designed for industrial display applications.
%
Uniformity 9 Points 75 80 - 1, 2, 3
LCD Module
SR_3 or
equivalent
Measuring distance
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum Brightness of nine points
δW9 =
Maximum Brightness of nine points
Note 4: Definition of contrast ratio (CR):
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 255 pattern (cd/m2)
YB = Luminance of measured location with gray level 255 pattern (cd/m2)
1/6
A A’ 1/6
1/3
1/2 1/2
B B’
2/3
127 gray level 127 gray level
Optical
response
100
90
10
0
White Black
G240HW01 V0
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of
amplitudes. Please refer to the figure as below.
% Tf Tr
White
range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right,
and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface
with the screen rotated to its center to develop the desired measurement viewing angle.
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
C1
1uF/16V
(High to Low)
Control
D1
D2
D5
D6
Signal Q3
R2 AO6402
G
1K
S
C3
+12.0V
2
SW1
SW MAG-SPST VR1 0.01uF/25V
47K
1
C2
1uF/25V
90% 5.0V
10%
VDD rising time 0V
0.5ms
[V] VTH/VTL=±100mV
VICM Differential Input Common Mode Voltage 0.3 - 1.25
V
T │VID│
H
اﻟﺟﮭد اﻟﻔرﻗﻰ ﻋﻠﻰ اﻟﻘﻣﺎوﻣﺔ
VICM ﻓوﻟت1.25
اﻻرض
VSS
Symbol
Vcc
Ivcc
PLED
FPWM
Vanalog
IF
Operating Life
Parameter
Input Voltage
Input Current
Power Consumption
Min
10.8
-
200
0
10
-
-
50000
Typ
12
2.0
24
-
3.3
N/A
100
-
Max
13.2
-
20k
3.6
100
-
-
-
Hz
.
Unit
Volt
A
Watt
Volt
mA
Hrs
G240HW01 V0
Remark
100% Dimming
No Analog Dimming
Ta = 25oC
Ta = 25oC
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: LED light bar structure: ( 7 strings x 10pcs / string =70pcs LED)
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1 ﺑﻛﺳل ﺑﻛﺳل1920
1 ﺻف
ﺻف1080
ﺑﺎرﺳﺎل اﺷﺎرة اﻟداﺗﺎ اﻟﻰ اﻟﺑﻛﺳل اﻻﺣﺎدﯾﺔ ﻟﻠﺑﺎﻧﺎل ﺑﯾﻧﻣﺎ ﯾﻘوم اﻟﺑورت او اﻟﻣﺧرجLVDS ( ﻟﻠرﺳﯾﻔرRxOxxx) ﯾﻘوم اﻟﺑورت اﻻول
( ﺑﺗﻐذﯾﺔ اﻟﺑﻛﺳل اﻟزوﺟﯾﺔRxExxx) اﻟﺗﺎﻧﻰ
ﻗﻧﺎة 1
اﻋﻠﻰ ﻣرﺗﺑﺔ
ﻗﻧﺎة 2
ﻗﻧﺎة 3
ﻗﻧﺎة 4
ﻗﻧﺎة 5
ﻗﻧﺎة 7
ﻗﻧﺎة 8
ﺑت اﺣﺗﯾﺎطﻰ
اﯾﺳﻰ LVDSﻋﺑﺎرة ﻋن 8ﻗﻧوات ﻟداﺗﺎ اﻻﻟوان واﺷﺎرة اﻟداﺗﺎ ﻋﺑﺎرة ﻋن 8ﺑت ﻟﻛل ﻟون ---ﺗم ﺗﻘﺳم اﻟداﺗﺎ اﻟﻰ
---- ﻗﺳﻣﯾن داﺗﺎ ﻟﻠﺑﻛﺳل اﻟﻔردﯾﺔ Oddوداﺗﺎ ﻟﻠﺑﻛﺳل اﻟزوﺟﯾﺔ ﺣﯾث ﺗﺣﺗل ﻛل داﺗﺎ 4ﻗﻧوات وﻛل ﻗﻧﺎة 8ﺑت
اﻟﺻﯾﻐﺔ اﻟﻣﺳﺗﺧدﻣﺔ ﻓﻰ ﺗوزﯾﻊ 8ﺑت ﻟﻛل ﻟون ھﻰ اﻟﺑدء ﺑﺎﻟﺑت اﻻﺻﻐر ﻣرﺗﺑﺔ وھﻰ 0اﻟﻰ ﺑت ﻣرﺗﺑﺔ 6وﯾﺑﻘﻰ 2
ﺑت ﻟﻛل ﻟون ﻗﺎم ﺑﺎرﺳﺎﻟﮭم اﻟﻰ ) اﻟﻘﻧﺎة اﻟراﺑﻌﺔ ﺑﺎﻟﻧﺳﺑﺔ ﻟﻼﻟوان اﻓردﯾﺔ ( )واﻟﻘﻧﺎة اﻟﺛﺎﻣﻧﺔ ﺑﺎﻟﻧﺳﺑﺔ ﻟﻼﻟوان اﻟزوﺟﯾﺔ (
-اﻟرﻣز OR , OG , OBﯾرﻣز اﻟﻰ ﺑﻛﺳل اﻟﻘﻧوات اﻟﻔردﯾﺔ ذات اﻟﻠون اﻻﺣﻣر واﻻﺧﺿر واﻻزرق ﺣﯾث ﺣرف O
ﻣﻌﻧﺎه ﺑﻛﺳل ﻓردى ﻓﻰ اﻟﺑﺎﻧﺎل اﻣﺎ ﺣرف Eﻓﻣﻌﻧﺎه ﺑﻛﺳل زوﺟﻰ ﻓﻰ اﻟﺑﺎﻧﺎل واﻟﻠون اﻻﺻﻔر ﯾظﻠل 4ﻗﻧوات اﻟﻔردﯾﺔ ﺣﯾث
ﺗﺑدء ﺑﺎﻟﻠون اﻻﺣﻣر ﻋﻠﻰ اﻟﯾﻣﯾن اﻻﻗل ﻣرﺗﺑﺔ
-ﺗم وﺿﻊ ﺑت اﻟﺗزاﻣن اﻻﻓﻘﻰ HSواﻟﺗزاﻣن اﻟراﺳﻰ VSوﺑت اﻟﺗﻣﻛﯾن DEﻓﻰ اﻟﻘﻧﺎة اﻟﺛﺎﻟﺛﺔ ﻟﻠﺑﻛﺳل اﻟﻔردى
واﻟﻘﻧﺎة اﻟﺳﺗﺑﻌﺔ ﻟﻠﺑﻛﺳل اﻟزوﺟﻰ وھﻧﺎك ﺑت اﺣﺗﯾﺎطﻰ Rsvdﻓﻰ اﻟﻘﻧﺎة اﻟراﺑﻌﺔ واﻟﺛﺎﻣﻧﺔ
ﻣﯾﺟﺎ ھﯾرﺗز72 وﺗردد اﻟﺳﺎﻋﺔ- ھﯾرﺗز60 ﻣن اﻟﺟدول ﺗردد اﻟﻔرﯾم ﻟﻠﺑﺎﻧﺎل
ﻧﺑﺿﺔ1060 = ﻋدد ﻧﺑﺿﺎت اﻟﺳﺎﻋﺔ اﻟﻼزﻣﺔ ﻟك ﺻف
ﺧط زﻣﻧﻰ1120 = ﻋدد اﻟﺧطوط اﻟزﻣﻧﯾﺔ ﻓﻰ اﻟﻔرﯾم
6.4.1 Timing Characteristics
1080*960 ﺑﯾﺎﻧﺎت اﺷﺎرة اﻟزﻣن ﻟﺑﺎﻧﺎل ذات روزوﻟﯾﺷن
Signal Item Symbol Min Typ Max Unit
DE
TVB
TVD
TV
or Analog dimming
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the
power when you plug the cable into the input connector or pull the cable out of the connector.
ﻓﺎﺿﻰ ﻓﺎﺿﻰ
ﺟﮭد اﻟﺗﺷﻐﯾل