Battery 6612

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Battery 6612

The Battery 6612 is a lithium battery module built To secure safe operation are all Ericsson Lithium
on high quality NMC cells. batteries integrated with the enclosure controller
system. Battery status is continuously monitored
Battery 6612 is designed to fit into 19” equipment and power system parameters for correct battery
space. operation is set automatically.

The Battery 6612 is designed for Ericsson Radio


System and legacy 6k enclosures however it can
be used in other enclosures as long as the right
safety approvals and environment conditions are
secured on the enclosure.
Battery 6612
MECHANICAL
Battery module Dimensions 174 x 440 x 352 mm
(H x W x D):
Weight: 36.5 kg

ELECTRICAL
Nominal voltage: -48 VDC
Capacity: 100 Ah
Energy: 4800 Wh
Recommended max discharge current 95 A
Discharge current cutoff 100 A
Recharge current limitation 50 A (If charge current is higher than 50 A will the current automatically be reduced to 6-
12 A until 100% SOC
Recommended max recharge current 45 A
Charge voltage to 100% SOC 54.6 V
Charge voltage to 80% SOC 52.0 V
End of Discharge Voltage 39.0 V

DESIGN LIFE
Calendar Life >15 Years
Cycle life @ 80% DOD >6000 cycles

ENVIRONMENTAL
Normal Operating Temp. Range +5 to +50 °C
Extended Operating Temp. Range -20 to +70 °C
Storage Temperature -20 to +50 °C
Humidity 5 – 95%

SUPERVISION AND CONTROL


Communication Port RS485, RJ45 port

NORMS AND STANDARDS


IEC/EN 62368-1, IEC/EN 62619, UN38.3
UL version also fulfills UL62368-1, UL1973

Telefonaktiebolaget LM Ericsson
SE-164 80 Stockholm, Sweden 10/28701-FGC 101 0695 Rev D
www.ericsson.com © Ericsson AB 2021

You might also like